- 06 Feb, 2023 9 commits
-
-
Heiko Carstens authored
Get rid of this sparse warning: arch/s390/kernel/diag.c:69:29: warning: symbol '__diag8c_tmp_amode31' was not declared. Should it be static? Fixes: fbaee746 ("s390/tty3270: add support for diag 8c") Signed-off-by:
Heiko Carstens <hca@linux.ibm.com>
-
Heiko Carstens authored
Compiling the kernel with CONFIG_KPROBES disabled, but CONFIG_RETHOOK enabled, results in this sparse warning: arch/s390/kernel/rethook.c:26:15: warning: no previous prototype for 'arch_rethook_trampoline_callback' [-Wmissing-prototypes] 26 | unsigned long arch_rethook_trampoline_callback(struct pt_regs *regs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Add a local rethook header file similar to riscv to address this. Reported-by:kernel test robot <lkp@intel.com> Fixes: 1a280f48 ("s390/kprobes: replace kretprobe with rethook") Link: https://lore.kernel.org/all/202302030102.69dZIuJk-lkp@intel.comSigned-off-by:
-
Vasily Gorbik authored
Kasan shadow memory area has been moved to the end of kernel address space since commit 9a39abb7 ("s390/boot: simplify and fix kernel memory layout setup"), therefore skipping any memory ranges above VMALLOC_START in empty page tables cleanup code already handles KASAN shadow memory intersection case and explicit checks could be removed. Reviewed-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Commit b9ff8100 ("s390/vmem: cleanup empty page tables") introduced empty page tables cleanup in vmem code, but when the kernel is built with KASAN enabled the code has no effect due to wrong KASAN shadow memory intersection condition, which effectively ignores any memory range below KASAN shadow. Fix intersection condition to make code work as anticipated. Fixes: b9ff8100 ("s390/vmem: cleanup empty page tables") Reviewed-by:
-
Vasily Gorbik authored
Kasan shadow memory area has been moved to the end of kernel address space since commit 9a39abb7 ("s390/boot: simplify and fix kernel memory layout setup"). Change kasan memory layout note accordingly. Reviewed-by:
-
Vasily Gorbik authored
Currently if for some reason sclp_early_read_info() fails, sclp_early_get_memsize() will not set max_physmem_end and it will stay uninitialized. Any garbage value other than 0 will lead to detect_memory() taking wrong path or returning a garbage value as max_physmem_end. To avoid that simply initialize max_physmem_end. Fixes: 73045a08 ("s390: unify identity mapping limits handling") Reported-by:
-
Heiko Carstens authored
Given that strlcpy() is deprecated use strscpy() instead. Signed-off-by: -
Sven Schnelle authored
commit 87fd22e0 ("s390/ipl: add eckd support") missed to add the loadparm attribute to the new eckd ipl/reipl data. Fixes: 87fd22e0 ("s390/ipl: add eckd support") Cc: <stable@vger.kernel.org> Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Reviewed-by:
-
Sven Schnelle authored
In the current code each reipl type implements its own pair of loadparm show/store functions. Add a macro to deduplicate the code a bit. Reviewed-by:
-
- 31 Jan, 2023 5 commits
-
-
Alexander Gordeev authored
Function __get_mem_detect_block() resets start and end output parameters in case of invalid mem_detect array index is provided. That violates the rule of sparing the output on fail path and leads e.g to a below anomaly: for_each_mem_detect_block(i, &start, &end) continue; One would expect start and end contain addresses of the last memory block (if available), but in fact the two will be reset to zeroes. That is not how an iterator is expected to work. Reviewed-by:
-
Vineeth Vijayan authored
Unbinding an I/O subchannel with a child-CCW device in disconnected state sometimes causes a kernel-panic. The race condition was seen mostly during testing, when setting all the CHPIDs of a device to offline and at the same time, the unbinding the I/O subchannel driver. The kernel-panic occurs because of double delete, the I/O subchannel driver calls device_del on the CCW device while another device_del invocation for the same device is in-flight. For instance, disabling all the CHPIDs will trigger the ccw_device_remove function, which will call a ccw_device_unregister(), which ends up calling the device_del() which is asynchronous via cdev's todo workqueue. And unbinding the I/O subchannel driver calls io_subchannel_remove() function which calls the ccw_device_unregister() and device_del(). This double delete can be prevented by serializing all CCW device registration/unregistration calls into the driver core. This patch introduces a mutex which will be used for this purpose. Signed-off-by:
Vineeth Vijayan <vneethv@linux.ibm.com> Reported-by:
Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
---[ Real Memory Copy Area Start ]--- 0x001bfffffffff000-0x001c000000000000 4K PTE I ---[ Kasan Shadow Start ]--- ---[ Real Memory Copy Area End ]--- 0x001c000000000000-0x001c000200000000 8G PMD RW NX ... ---[ Kasan Shadow End ]--- ptdump does a stable sort of markers. Move kasan markers after memcpy real to avoid swapping. Reviewed-by:
-
Vasily Gorbik authored
setup_vmem() already calls populate for all online memory regions. pgtable_populate_end() could be removed. Also rename pgtable_populate_begin() to pgtable_populate_init(). Reviewed-by:
-
Vasily Gorbik authored
Commit bb1520d5 ("s390/mm: start kernel with DAT enabled") doesn't consider online memory holes due to potential memory offlining and erroneously creates pgtables for stand-by memory, which bear RW+X attribute and trigger a warning: RANGE SIZE STATE REMOVABLE BLOCK 0x0000000000000000-0x0000000c3fffffff 49G online yes 0-48 0x0000000c40000000-0x0000000c7fffffff 1G offline 49 0x0000000c80000000-0x0000000fffffffff 14G online yes 50-63 0x0000001000000000-0x00000013ffffffff 16G offline 64-79 s390/mm: Found insecure W+X mapping at address 0xc40000000 WARNING: CPU: 14 PID: 1 at arch/s390/mm/dump_pagetables.c:142 note_page+0x2cc/0x2d8 Map only online memory ranges which fit within identity mapping limit. Fixes: bb1520d5 ("s390/mm: start kernel with DAT enabled") Reviewed-by:
-
- 25 Jan, 2023 13 commits
-
-
Heiko Carstens authored
bpftrace and friends only consider functions present in /sys/kernel/tracing/available_filter_functions. For system calls there is the s390 specific problem that the system call function itself is present via __se_sys##name() while the system call itself is wired up via an __s390x_sys##name() alias. The required DWARF debug information however is only available for the original function, not the alias, but within available_filter_functions only the functions with __s390x_ prefix are available. Which means the required DWARF debug information cannot be found. While this could be solved via tooling, it is easier to change the s390 specific system call wrapper handling. Therefore get rid of this alias handling and implement system call wrappers like most other architectures are doing. In result the implementation generates the following functions: long __s390x_sys##name(struct pt_regs *regs) static inline long __se_sys##name(...) static inline long __do_sys##name(...) __s390x_sys##name() is the visible system call function which is also wired up in the system call table. Its only parameter is a pt_regs variable. This function calls the corresponding __se_sys##name() function, which has as many parameters like the system call definition. This function in turn performs all zero and sign extensions of all system call parameters, taken from the pt_regs structure, and finally calls __do_sys##name(). __do_sys##name() is the actual inlined system call function implementation. For all 64 bit system calls there is a 31/32 bit system call function __s390_sys##name() generated, which handles all system call parameters correctly as required by compat handling. This function may be wired up within the compat system call table, unless there exists an explicit compat system call function, which is then used instead. Reported-by:
Ilya Leoshkevich <iii@linux.ibm.com> Tested-by:
-
Heiko Carstens authored
Reviewed-by:
-
Heiko Carstens authored
Move __S390_SYS_STUBx() the end of the CONFIG_COMPAT section, so both variants (compat and non-compat) are close together and can be easily compared. Reviewed-by:
-
Heiko Carstens authored
Remove __SC_COMPAT_TYPE define which is an unused leftover. Reviewed-by:
-
Heiko Carstens authored
SYSCALL_METADATA() is only supposed to be used for non-compat system calls. Otherwise there would be a name clash. This also removes the inconsistency that s390 is the only architecture which uses SYSCALL_METADATA() for compat system calls, and even that only for compat system calls without parameters. Only two such compat system calls exist. Reviewed-by:
-
Ilya Leoshkevich authored
When debugging vmlinux with QEMU + GDB, the following GDB error may occur: (gdb) c Continuing. Warning: Cannot insert breakpoint -1. Cannot access memory at address 0xffffffffffff95c0 Command aborted. (gdb) The reason is that, when .interp section is present, GDB tries to locate the file specified in it in memory and put a number of breakpoints there (see enable_break() function in gdb/solib-svr4.c). Sometimes GDB finds a bogus location that matches its heuristics, fails to set a breakpoint and stops. This makes further debugging impossible. The .interp section contains misleading information anyway (vmlinux does not need ld.so), so fix by discarding it. Signed-off-by: -
Thomas Richter authored
Simplify the use of constants PMC_INIT and PMC_RELEASE. Suggested-by:
Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
With no in-kernel user, the source files can be merged. Move all functions and the variable definitions to file perf_cpum_cf.c This file now contains all the necessary functions and definitions for the CPU Measurement counter facility device driver. The files cpu_mcf.h and perf_cpum_cf_common.c are deleted. Signed-off-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
Commit 17bebcc6 ("s390/cpum_cf: Add minimal in-kernel interface for counter measurements") introduced a small in-kernel interface for CPU Measurement counter facility. There are no users of this interface, therefore remove it. The following functions are removed: kernel_cpumcf_alert(), kernel_cpumcf_begin(), kernel_cpumcf_end(), kernel_cpumcf_avail() there is no need for them anymore. With the removal of function kernel_cpumcf_alert(), also remove member alert in struct cpu_cf_events. Its purpose was to counter measurement alert interrupts for the in-kernel interface. Signed-off-by:
-
Thomas Richter authored
Function stccm_avail() is defined in a header file and the only user is one single source file. Move this function to the source file where it is also used and remove it from the header file. No functional change. Signed-off-by:
-
Thomas Richter authored
Function cpum_cf_ctrset_size() is defined in one source file and the only user is in another source file. Move this function to the source file where it is used and remove its prototype from the header file. No functional change. Signed-off-by:
-
Thomas Richter authored
To remove an event from the CPU Measurement counter facility use the lock/unlock scheme as done in event creation. Remove the atomic_add_unless function to make the code easier. Signed-off-by:
-
Heiko Carstens authored
The unsigned long long type is a leftover of the 31 bit area. Get rid of it. Signed-off-by:
-
- 22 Jan, 2023 13 commits
-
-
Tony Krowiak authored
Increase the maximum time to wait for verification of a queue reset operation to 200ms. Signed-off-by:
Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by:
Jason J. Herne <jjherne@linux.ibm.com> Reviewed-by:
Harald Freudenberger <freude@linux.ibm.com> Link: https://lore.kernel.org/r/20230118203111.529766-7-akrowiak@linux.ibm.comSigned-off-by:
Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by:
-
Tony Krowiak authored
Some response codes returned from the queue reset function are not being handled correctly; this patch fixes them: 1. Response code 3, AP queue deconfigured: Deconfiguring an AP adapter resets all of its queues, so this is handled by indicating the reset verification completed successfully. 2. For all response codes other than 0 (normal reset completion), 2 (queue reset in progress) and 3 (AP deconfigured), the -EIO error will be returned from the vfio_ap_mdev_reset_queue() function. In all cases, all fields of the status word other than the response code will be set to zero, so it makes no sense to check status bits. Signed-off-by:
-
Tony Krowiak authored
Verification that the asynchronous ZAPQ function has completed only needs to be done when the response code indicates the function was successfully initiated; so, let's call the apq_reset_check function immediately after the response code zero is returned from the ZAPQ. Signed-off-by:
-
Tony Krowiak authored
To eliminate the repeated calls to the PQAP(ZAPQ) function to verify that a reset in progress completed successfully and ensure that error response codes get appropriately logged, let's call the apq_reset_check() function when the ZAPQ response code indicates that a reset that is already in progress. Signed-off-by:
-
Tony Krowiak authored
The vfio_ap_mdev_reset_queue() function does not check the status response code returned form the PQAP(TAPQ) function when verifying the queue's status; consequently, there is no way of knowing whether verification failed because the wait time was exceeded, or because the PQAP(TAPQ) failed. This patch adds a function to check the status response code from the PQAP(TAPQ) instruction and logs an appropriate message if it fails. Signed-off-by:
-
Tony Krowiak authored
The vfio_ap_mdev_reset_queue() function contains a loop to verify that the reset successfully completes within 40ms. This patch moves that loop into a separate function. Signed-off-by:
-
Vasily Gorbik authored
That's an adaptation of commit f3a112c0 ("x86,rethook,kprobes: Replace kretprobe with rethook on x86") to s390. Replaces the kretprobe code with rethook on s390. With this patch, kretprobe on s390 uses the rethook instead of kretprobe specific trampoline code. Tested-by:
-
Thomas Richter authored
The CPU Measurement Sampling Facility (CPUM_SF) installs large buffers to save samples collected by hardware. These buffers are organized as Sample Data Buffer Tables (SDBT) and Sample Data Buffers (SDB). SDBs contain the samples which are extracted and saved in the perf ring buffer. The SDBTs are chained using real addresses and refer to SDBs using real addresses. The diagnostic sampling setup uses buffers provided by the process which invokes perf_event_open system call. The buffers are memory mapped. The buffers have been allocated by the kernel event subsystem. Add proper virtual to phyiscal address translation to the buffer chaining. The current constraint which requires virtual equals real address layout is removed. Signed-off-by:
-
Thomas Richter authored
Macro AUX_SDB_NUM() has three parameters. The first one is not used. Remove the first parameter. Also convert the macros to inline functions. No functional change. Signed-off-by:
-
Thomas Richter authored
The CPU Measurement Sampling Facility (CPUM_SF) installs large buffers to save samples collected by hardware. These buffers are organized as Sample Data Buffer Tables (SDBT) and Sample Data Buffers (SDB). SDBs contain the samples which are extracted and saved in the perf ring buffer. The SDBTs are chained using real addresses and refer to SDBs using real addresses. Adds proper virtual to phyiscal address translation to the buffer chaining. The current constraint which requires virtual equals real address layout is removed. Signed-off-by:
-
Thomas Richter authored
Remove debug statements from function setup_pmc_cpu(). The debug statement displays a pointer value to a per cpu variable. This pointer value is printed nowhere else, so it has no use for cross reference. No functional change. Signed-off-by:
-
Thomas Richter authored
Some inline helper functions are defined in a header file but used in only one source file. Move these functions to the source file. No functional change. Signed-off-by:
-
Jiapeng Chong authored
Swap is a function interface that provides exchange function. To avoid code duplication, we can use swap function. ./arch/s390/mm/vmem.c:680:10-11: WARNING opportunity for swap(). [hca@linux.ibm.com: get rid of all temp variables] Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3786Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230117060223.58583-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
