- 09 Mar, 2010 19 commits
-
-
Juuso Oikarinen authored
Remove the annoying and dmesg-flooding WLAN PSM entry/exit traces. Instead, only output them if PSM traces are enabled. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
The queue stopping/waking functionality was broken in a way that could cause huge latencies in TX transfers and even cause the TX to stall in the right circumstances. Correct these problems. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
This patch fixes a bug in ad-hoc mode preventing mac80211 from properly detecting other ad-hoc networks with the same SSID. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
- Fix a TX result overflow problem that was present in the TX path and visible with at least linksys AP's (probably any AP with high throughput capability.) - Optimize TX by writing FW trigger for a group of TX frames instead of each and every frame. - Slightly optimize the TX path code. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Kalle Valo authored
Most probably patch "wl1271: add most of the normal initialization commands to PLT mode" enabled the RX path in firmware so that now driver received frames and passed them to mac80211, which warned about them. Workaround this by not retrieving frames from the hardware, just ignore them. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Fixed two bugs causing problems when unloding wl1271 module. First was missing sdio_set_drvdata call from the probe function, second was order of function calls in the remove function. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Changed access to fw status register to use raw read instead of translated addressing. On SDIO access by translated addressing was not working and raw access is working also on SPI. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Added initial implementation of SDIO interfacte to the wl1271 driver. When selected, this adds new module called "wl1271_sdio". Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Divided wl1271 driver to wl1271 "core" and wl1271_spi modules in preparation of integration of the SDIO implementation. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Removed wl1271_spi.h header as there's no more need to access functions declared there outside of wl1271_spi.c. Also made those SPI access functions static. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Changed IO functions to static inline. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Changed the driver to use if_ops structure to abstract access to the IO layer (SPI or SDIO). Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Added/moved enable and disable interrupt handling functions. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Teemu Paasikivi authored
Moved wl1271 drivers probe, remove etc. functions and structres to wl1271_spi.c from wl1271_main.c in preparation of implementing SDIO interface. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
P54 devices always generate a full tx_status report (ACK, PSM, rate control, etc..) for every xmitted frame. Therefore, I think The driver qualifies for the REPORTS_TX_ACK_STATUS hardware feature flag. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
ath5k_hw_register_timeout() was duplicated between phy.c and reset.c. Since it is too big and too much used to be an inline function, move it away from the ath5k.h header into reset.c. Remove _ATH5K_RESET and _ATH5K_PHY defines. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
Adjust formatting of the affected lines to satisfy checkpatch.pl. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
Remove all unnecessary function declarations from ath5k.h. Comment out unused functions. Remove ath5k_hw_get_tsf32(), which is too trivial to be commented out. Make functions static if suggested by sparse. Make ath5k_pm_ops static. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The noise value as is won't be used, isn't filled by most drivers and doesn't really make a whole lot of sense on a per packet basis -- proper cfg80211 survey support in mac80211 will need to be different. Mark the struct member as deprecated so it will be removed from drivers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 03 Mar, 2010 2 commits
-
-
Helmut Schaa authored
Export rt2x00soc_probe from rt2x00soc as it is used in rt2800pci. Otherwise loading rt2800pci gives "rt2800pci: Unknown symbol rt2x00soc_probe". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
Handling HT configuration changes involved setting the channel with the new HT parameters and then issuing a rate_update() notification to the driver. This behavior changed after the off-channel changes. Now, the channel is not updated with the new HT params in enable_ht() - instead, it is now done when the scan work terminates. This results in the driver depending on stale information, defaulting to non-HT mode always. Fix this by passing the new channel type to the driver. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 02 Mar, 2010 14 commits
-
-
Johannes Berg authored
At the wireless summit in Portland we discussed a way of loading firmware asynchronously from ->probe() before registration to mac80211, in order to register with the wireless subsystems with complete information in cases where firmware is required to know parameters. This is not yet the case in iwlwifi, but for some new features we're working on it will be the case since those will only be supported by new firmware images. Hence, to start with, convert iwlwifi to load firmware asynchronously from probe, unbinding the device when firmware loading fails, and only registering with the wireless subsystems after firmware has been loaded successfully. Future patches will hook into this to register the new firmware capabilities, depending on the firmware API version. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This converts ar9170 to load firmware asynchronously out of ->probe() and only register with mac80211 when all firmware has been loaded successfully. If, on the other hand, any firmware fails to load, it will now unbind from the device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Compiling rt2800pci with CONFIG_RT2800PCI_SOC fails with "... rt2880pci.c: error: incompatible type for argument 2 of 'rt2x00soc_probe'". Fix this by using &rt2800pci_ops instead of rt2800pci_ops. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bryan Polk authored
This adds support for CEIVA USB wireless adapters to the rt73usb driver. Signed-off-by: Bryan Polk <sainth@eidolons.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jouni Malinen authored
Commit e1dd33f60ced091114e4aacf141e0d03b88d3e13 changed cfg80211 to allow association commands while in associated state to enable support for roaming within an ESS. However, this was not enough to resolve all cases with mac80211 which needs some additional handling of the reassociation case to clear internal state with the BSS that was in use previously. This patch makes ieee80211_mgd_assoc() accept a valid reassociation command and clean the association state with the previous BSS. This fixes roaming between BSSes in an ESS when using wpa_supplicant with -Dnl80211. Signed-off-by: Jouni Malinen <j@w1.fi> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ming Lei authored
Since txq->axq_lock may be hold in softirq context, it must be acquired with spin_lock_bh() instead of spin_lock() if softieq is enabled. The patch fixes the lockdep warning below when unloading ath9k modules. ================================= [ INFO: inconsistent lock state ] 2.6.33-wl #12 --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rmmod/3642 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&txq->axq_lock)->rlock){+.?...}, at: [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] {IN-SOFTIRQ-W} state was registered at: [<ffffffff8107577d>] __lock_acquire+0x2f6/0xd35 [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffff813a7486>] _raw_spin_lock_bh+0x3b/0x6e [<ffffffffa0356b49>] spin_lock_bh+0xe/0x10 [ath9k] [<ffffffffa0358ec7>] ath_tx_tasklet+0xcd/0x391 [ath9k] [<ffffffffa0354f5f>] ath9k_tasklet+0x70/0xc8 [ath9k] [<ffffffff8104e601>] tasklet_action+0x8c/0xf4 [<ffffffff8104f459>] __do_softirq+0xf8/0x1cd [<ffffffff8100ab1c>] call_softirq+0x1c/0x30 [<ffffffff8100c2cf>] do_softirq+0x4b/0xa3 [<ffffffff8104f045>] irq_exit+0x4a/0x8c [<ffffffff813acccc>] do_IRQ+0xac/0xc3 [<ffffffff813a7d53>] ret_from_intr+0x0/0x16 [<ffffffff81302d52>] cpuidle_idle_call+0x9e/0xf8 [<ffffffff81008be7>] cpu_idle+0x62/0x9d [<ffffffff81391c1a>] rest_init+0x7e/0x80 [<ffffffff818bbd38>] start_kernel+0x3e8/0x3f3 [<ffffffff818bb2bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff818bb3b8>] x86_64_start_kernel+0xf8/0x107 irq event stamp: 42037 hardirqs last enabled at (42037): [<ffffffff813a7b21>] _raw_spin_unlock_irqrestore+0x47/0x56 hardirqs last disabled at (42036): [<ffffffff813a72f4>] _raw_spin_lock_irqsave+0x2b/0x88 softirqs last enabled at (42000): [<ffffffffa0353ea6>] spin_unlock_bh+0xe/0x10 [ath9k] softirqs last disabled at (41998): [<ffffffff813a7463>] _raw_spin_lock_bh+0x18/0x6e other info that might help us debug this: 4 locks held by rmmod/3642: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8132c10d>] rtnl_lock+0x17/0x19 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffa01e53f2>] cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0260834>] ieee80211_mgd_deauth+0x3f/0x17e [mac80211] #3: (&local->sta_mtx){+.+.+.}, at: [<ffffffffa025a381>] sta_info_destroy_addr+0x2b/0x5e [mac80211] stack backtrace: Pid: 3642, comm: rmmod Not tainted 2.6.33-wl #12 Call Trace: [<ffffffff81074469>] valid_state+0x178/0x18b [<ffffffff81014f94>] ? save_stack_trace+0x2f/0x4c [<ffffffff81074e08>] ? check_usage_backwards+0x0/0x88 [<ffffffff8107458f>] mark_lock+0x113/0x230 [<ffffffff810757f1>] __lock_acquire+0x36a/0xd35 [<ffffffff8101018d>] ? native_sched_clock+0x2d/0x5f [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffff813a7193>] _raw_spin_lock+0x36/0x69 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810749ed>] ? trace_hardirqs_on+0xd/0xf [<ffffffffa0353950>] ath9k_sta_remove+0x22/0x26 [ath9k] [<ffffffffa025a08f>] __sta_info_destroy+0x1ad/0x38c [mac80211] [<ffffffffa025a394>] sta_info_destroy_addr+0x3e/0x5e [mac80211] [<ffffffffa02605d6>] ieee80211_set_disassoc+0x175/0x180 [mac80211] [<ffffffffa026084d>] ieee80211_mgd_deauth+0x58/0x17e [mac80211] [<ffffffff813a60c1>] ? __mutex_lock_common+0x37f/0x3a4 [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffffa026786e>] ieee80211_deauth+0x1e/0x20 [mac80211] [<ffffffffa01f47f9>] __cfg80211_mlme_deauth+0x130/0x13f [cfg80211] [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa01f7eee>] __cfg80211_disconnect+0x111/0x189 [cfg80211] [<ffffffffa01e5433>] cfg80211_netdev_notifier_call+0x2ce/0x46d [cfg80211] [<ffffffff813aa9ea>] notifier_call_chain+0x37/0x63 [<ffffffff81068c98>] raw_notifier_call_chain+0x14/0x16 [<ffffffff81322e97>] call_netdevice_notifiers+0x1b/0x1d [<ffffffff8132386d>] dev_close+0x6a/0xa6 [<ffffffff8132395f>] rollback_registered_many+0xb6/0x2f4 [<ffffffff81323bb8>] unregister_netdevice_many+0x1b/0x66 [<ffffffffa026494f>] ieee80211_remove_interfaces+0xc5/0xd0 [mac80211] [<ffffffffa02580a2>] ieee80211_unregister_hw+0x47/0xe8 [mac80211] [<ffffffffa035290e>] ath9k_deinit_device+0x7a/0x9b [ath9k] [<ffffffffa035bc26>] ath_pci_remove+0x38/0x76 [ath9k] [<ffffffff8120940a>] pci_device_remove+0x2d/0x51 [<ffffffff8129d797>] __device_release_driver+0x7b/0xd1 [<ffffffff8129d885>] driver_detach+0x98/0xbe [<ffffffff8129ca7a>] bus_remove_driver+0x94/0xb7 [<ffffffff8129ddd6>] driver_unregister+0x6c/0x74 [<ffffffff812096d2>] pci_unregister_driver+0x46/0xad [<ffffffffa035bae1>] ath_pci_exit+0x15/0x17 [ath9k] [<ffffffffa035e1a2>] ath9k_exit+0xe/0x2f [ath9k] [<ffffffff8108050a>] sys_delete_module+0x1c7/0x236 [<ffffffff813a7df5>] ? retint_swapgs+0x13/0x1b [<ffffffff810749b5>] ? trace_hardirqs_on_caller+0x119/0x144 [<ffffffff8109b9f6>] ? audit_syscall_entry+0x11e/0x14a [<ffffffff81009bb2>] system_call_fastpath+0x16/0x1b wlan1: deauthenticating from 00:23:cd:e1:f9:b2 by local choice (reason=3) PM: Removing info for No Bus:wlan1 cfg80211: Calling CRDA to update world regulatory domain PM: Removing info for No Bus:rfkill2 PM: Removing info for No Bus:phy1 ath9k 0000:16:00.0: PCI INT A disabled Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
The first chunk fixes a debugging assert to print a warning about array underflows. The second chunk corrects a potential array underflow. I also removed an assert in the second chunk because it can no longer happen. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Matthew Garrett authored
Add support for handling KEY_RFKILL in the rfkill input module. This simply toggles the state of all rfkill devices. The comment in rfkill.h is also updated to reflect that RFKILL_TYPE_ALL may be used inside the kernel. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Even if keylen == 0 is a bug and should not really happen, better avoid possibility of passing bad value to firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jiri Pirko authored
This is no longer needed. I missed to remove this in 567ec874 ("net: convert multiple drivers to use netdev_for_each_mc_addr, part6") Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herton Ronaldo Krzesinski authored
Some sis190 devices don't report LinkChange, so do polling for link status. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit e992cd9b (kmemcheck: make bitfield annotations truly no-ops when disabled) allows us to revert a workaround we did in the past to not add holes in sk_buff structure. This patch partially reverts commit 14d18a81 (net: fix kmemcheck annotations) so that sparse doesnt complain: include/linux/skbuff.h:357:41: error: invalid bitfield specifier for type restricted __be16. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Mar, 2010 3 commits
-
-
David S. Miller authored
Conflicts: drivers/firmware/iscsi_ibft.c
-
Vladislav Zolotarov authored
[Resending with the proper subject. Sorry for the mess. ] This patch is based on the RFC of Stanislaw Gruszka. More specifically it fixes two possible races: - One, described by Stanislaw, may lead to permanent disabling of the Tx queue. This is fixed by adding the smp_wmb() to propagate the BD consumer change towards the memory. - Second may lead to bnx2x_start_xmit() returning NETDEV_TX_BUSY. This is fixed by taking a tx_lock() before rechecking the number of available Tx BDs. thanks, vlad Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
We use scm_send and scm_recv on both unix domain and netlink sockets, but only unix domain sockets support everything required for file descriptor passing, so error if someone attempts to pass file descriptors over netlink sockets. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Feb, 2010 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: Remove recursion in uv_heartbeat_enable() x86, uv: uv_global_gru_mmr_address() macro fix x86, uv: Add serial number parameter to uv_bios_get_sn_info()
-
Linus Torvalds authored
Merge branch 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ptrace: Remove set_stopped_child_used_math() in [x]fpregs_set x86, ptrace: Simplify xstateregs_get() ptrace: Fix ptrace_regset() comments and diagnose errors specifically parisc: Disable CONFIG_HAVE_ARCH_TRACEHOOK ptrace: Add support for generic PTRACE_GETREGSET/PTRACE_SETREGSET x86, ptrace: regset extensions to support xstate
-