- 29 Nov, 2023 40 commits
-
-
Anthony Koo authored
- Add a new dmub command in enum dmub_cmd_cab_type Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Acked-by:
Anthony Koo <anthony.koo@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Felix Kuehling authored
Make restore workers freezable so we don't have to explicitly flush them in suspend and GPU reset code paths, and we don't accidentally try to restore BOs while the GPU is suspended. Not having to flush restore_work also helps avoid lock/fence dependencies in the GPU reset case where we're not allowed to wait for fences. A side effect of this is, that we can now have multiple concurrent threads trying to signal the same eviction fence. Rework eviction fence signaling and replacement to account for that. The GPU reset path can no longer rely on restore_process_worker to resume queues because evict/restore workers can run independently of it. Instead call a new restore_process_helper directly. This is an RFC and request for testing. v2: - Reworked eviction fence signaling - Introduced restore_process_helper v3: - Handle unsignaled eviction fences in restore_process_bos Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Tested-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY/HOW] Add a new AUX sequence provided by vendor to improve interop with specific display configurations. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
-
Dmytro Laktyushkin authored
[WHY/HOW] Limit the dynamic crb to dual stream configs that include eDP Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by:
-
Mario Limonciello authored
When dGPU is put into BOCO it may be in D3cold but still able send PME on display hotplug event. For this to work it must be enabled as wake source from D3. When runpm is enabled use pci_wake_from_d3() to mark wakeup as enabled by default. Cc: stable@vger.kernel.org # 6.1+ Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Acked-by:
-
Lu Yao authored
For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init 'didt_rreg' and 'didt_wreg' to 'NULL'. But in func 'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT' lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use these two definitions won't be added for 'AMDGPU_FAMILY_SI'. So, add null pointer judgment before calling. Reviewed-by:
Lu Yao <yaolu@kylinos.cn> Signed-off-by:
-
Dinghao Liu authored
When kzalloc() for smu_table->ecc_table fails, we should free the previously allocated resources to prevent memleak. Fixes: edd79420 ("drm/amd/pm: add message smu to get ecc_table v2") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
Alex Deucher authored
This worked by luck if the GART aperture ended up at 0. When we ended up moving GART on some chips, the GART aperture ended up offsetting the AGP address since the resource->start is a GART offset, not an MC address. Fix this by moving the AGP address setup into amdgpu_bo_gpu_offset_no_check(). v2: check mem_type before checking agp v3: check if the ttm bo has a ttm_tt allocated yet Fixes: 67318cb8 ("drm/amdgpu/gmc11: set gart placement GC11") Tested-by:
Jesse Zhang <Jesse.Zhang@amd.com> Reported-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
RutingZhang authored
checkpatch complains that: WARNING: braces {} are not necessary for single statement blocks + if (pool->base.irqs != NULL) { + dal_irq_service_destroy(&pool->base.irqs); + } Fixed it by removing unnecessary braces to fix the coding style issue. Signed-off-by:RutingZhang <u202112078@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by:
-
Dmytro Laktyushkin authored
[WHY/HOW] Increase the pstate latency to improve ac/dc transition Reviewed-by:
-
Hamza Mahfooz authored
On recent versions of DMUB firmware, if we want to completely disable ABM we have to pass ABM_LEVEL_IMMEDIATE_DISABLE as the requested ABM level to DMUB. Otherwise, LCD eDP displays are unable to reach their maximum brightness levels. So, to fix this whenever the user requests an ABM level of 0 pass ABM_LEVEL_IMMEDIATE_DISABLE to DMUB instead. Also, to keep the user's experience consistent map ABM_LEVEL_IMMEDIATE_DISABLE to 0 when a user tries to read the requested ABM level. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Lijo Lazar authored
Refactor code such that ras block decides the default mca debug mode, and not swsmu block. By default mca debug mode is set to false. v2: squash in uninitialized value fix (Alex) Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Aric Cyr authored
This version brings along the following: - DCN314 fixes - DCN32 fixes - DCN35 fixes - DML2 fixes - eDP fixes - HDR fixes - MST fixes - Replay fixes - SubVP support for more configs Acked-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Anthony Koo authored
- Add a tracing framework, to measure duration, execution count and longest duration of main loop/vsync interrupt work GPINT command is used to start/stop the measurements. Acked-by:
-
Sung Joon Kim authored
[why] We have dynamic power control in driver but should be ignored when power is forced on. [how] Bypass any power control when it's forced on. Cc: stable@vger.kernel.org Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Sung Joon Kim <sungkim@amd.com> Signed-off-by:
-
Taimur Hassan authored
[Why] There are a number of instances where we convert HostVMMinPageSize or GPUVMMinPageSize from bytes to KB by dividing (rather than multiplying) and vice versa. Additionally, in some cases, a parameter is passed through DML in KB but later checked as if it were in bytes. Cc: stable@vger.kernel.org Reviewed-by:
Taimur Hassan <syed.hassan@amd.com> Signed-off-by:
-
Mukul Joshi authored
KFD_GC_VERSION was recently updated to use a new function for IP version checks. As a result, use KFD_GC_VERSION as the common function for all IP version checks in KFD. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Taimur Hassan authored
[Why] Prevent overwrite of dc->config.use_default_clock_table, as it should be pre-configured. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] The new table doesn't have an implicit mapping between Fclk SOC voltage and MemClk and it currently builds the table off of number of Fclk states rather than DcfClock states. The DML table in use is not correct for functionality or power and does not align with our existing policies for DCN3x. [How] Build the table based on DcfClock with the following assumptions: 1. Raising Soc voltage is the most expensive operation, so assume that running at max DispClock or DppClock is preferable. 2. Assume that we can run at max Fclk / MemClk at any state, but restrict the maximum state to the very last entry in the table as the worst case scenario. 3. Assume that Fclk always has a 2x multiplier on DcfClock unless the table specifies something lower. Reviewed-by:
-
Parandhaman K authored
[why] Move all optc files to unique folder optc. [how] creating optc repo in dc, and moved the dcnxx_optc.c and .h files into corresponding new folders inside the optc and cleared the linkage errors by adding relative paths in the Makefile.template. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Parandhaman K <parandhaman.k@amd.com> Signed-off-by:
-
Zhongwei authored
[WHY] Handover from DMUB to driver does not perform link rate toggle. It might cause link training failure for boot up. [HOW] Force toggle rate wa for first link train. link->vendor_specific_lttpr_link_rate_wa should be zero then. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
Zhongwei <zhongwei.zhang@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - To reduce vlevel further, we can try to apply subvp on configs that already support p-state since the natural p-state support may not allow for DPM0. - Add code to try subvp to reduce UCLK DPM level further if already supported, but don't use subvp if it does not optimize the DPM level even lower Reviewed-by:
Samson Tam <samson.tam@amd.com> Acked-by:
Alvin Lee <alvin.lee2@amd.com> Signed-off-by:
-
Prike Liang authored
Fix the amdgpu runpm dereference usage count. Signed-off-by:
Prike Liang <Prike.Liang@amd.com> Reviewed-by:
-
Gabe Teeger authored
This reverts commit fcfc6cee. [why] Flickering observed. Regression search pointed to this being the offending commit. Reviewed-by:
Yihan Zhu <yihan.zhu@amd.com> Acked-by:
Gabe Teeger <gabe.teeger@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Some panels with residency period of 2054 exhibit flickering with Z8 at the end of the frame. [How] As a workaround, increase the limit to block these panels. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] Flickering occurs on DRR supported panels when engaged in DRR due to min_dst_y_next becoming larger than the frame size itself. [How] In general, we should be able to enter Z8 when this is engaged but it might be a net power loss even if the calculation wasn't bugged. Don't support enabling Z8 during the DRR region. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
-
Meenakshikumar Somasundaram authored
[Why] When otg workaround is applied during clock update, otgs of tiled display went out of sync. [How] To call dc_trigger_sync() after clock update to sync otgs again. Reviewed-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by:
-
Tim Huang authored
Fix a memory overflow issue in the gfx IB test for some ASICs. At least 20 bytes are needed for the IB test packet. v2: correct code indentation errors. (Christian) Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Reviewed-by:
-
Li Ma authored
enable init_registers callback func for nbio v7.11. Signed-off-by:
Li Ma <li.ma@amd.com> Reviewed-by:
-
Alvin Lee authored
[Description] - Previously SubVP would never be selected on 1080p60 displays because it has too much vactive margin. However, implement a change to allow it like how 1440p60 is allowed. - Add a new struct such that we have a list of allowed modes for enabling subvp with vactive margin (currently 1080p60 and 1440p60) - Also ensure to block drr + vblank cases to prevent unexpected enablement of new display configs - Update SW cursor fallback for these new potential cases as well Reviewed-by:
-
Dennis Chan authored
[why] If Panel max link off frame count is low, it will cause low residency for Replay, then Disabled timing sync check in Full screen Video Case. Reviewed-by:
Robin Chen <robin.chen@amd.com> Acked-by:
Dennis Chan <dennis.chan@amd.com> Signed-off-by:
-
Wayne Lin authored
[Why] MST relevant variables are maintained at drm side. As the result, we still have to call drm_dp_remove_payload_part2() to update the relevant values regardless the link is under mst mode or not. We used to have a workaround patch to tackle this: commit 3d8fcc67 ("drm/amd/display: Extract temp drm mst deallocation wa into its own function") Now it's time to remove the workaround and adjust the flow. [How] During deallocate_mst_payload(), source actually doesn't send out ALLOCATE_PAYLOAD at the end as like the flow in allocate_mst_payload(). Call function dm_helpers_dp_mst_send_payload_allocation() at the end of deallocate_mst_payload() is a bit confusing. Separate dm_helpers_dp_mst_send_payload_allocation() into 2 functions. Have a new function dm_helpers_dp_mst_update_mst_mgr_for_deallocation() to replace dm_helpers_dp_mst_send_payload_allocation() for payload deallocation. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
-
Camille Cho authored
[Why] Remove the brightness cache in DC. It uses a single value to represent the brightness for both SDR and HDR mode. This leads to flash in HDR on/off. It also unconditionally programs brightness as in HDR mode. This may introduce garbage on SDR mode in miniLED panel. [How] Simplify the initialization flow by removing the DC cache and taking what panel has as default. Expand the mechanism for PWM to DPCD Aux to restore cached brightness value generally. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by:
Camille Cho <camille.cho@amd.com> Signed-off-by:
-
Max Tseng authored
[Why] Sending certain Frameupdate number for Replay Power Evaluation Reviewed-by:
Max Tseng <max.tseng@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] If during driver init stage there are greater than 20 intermediary voltage states while constructing the SOC BB we could hit issues because we will index outside of the clock_limits array and start overwriting data. Increase the total number of states to 40 to avoid this issue. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
-
Michael Strauss authored
[WHY] Currently DCN35 does not spread DPREFCLK [HOW] Remove hardcoded table with nonzero caps Reviewed-by:
-
Max Tseng authored
Augment the function to allow send different format data in different use case. Reviewed-by:
-
Bhuvana Chandra Pinninti authored
[why] To refactor DSC and make DSC files unit testable. [how] moved the dcnxx_dsc.c and .h files into corresponding dcn folders inside the dsc and cleared the linkage errors. Reviewed-by:
Bhuvana Chandra Pinninti <bhuvanachandra.pinninti@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] When choosing which dummy p-state latency to use, we need to use the DRAM speed from validation. The DRAMSpeed DML variable can change because we use different input params to DML when populating watermarks set B. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
-
Ilya Bakoulin authored
[Why] Wrong function is used to translate LUT values to HW format, leading to visible artifacting in some cases. [How] Use the correct cm3_helper function. Cc: stable@vger.kernel.org # 6.1+ Reviewed-by:
Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by:
-
