When doing a full send we know that we are going to be reading every node
and leaf of the send root, so we benefit from enabling read ahead for the
btree.

This change enables read ahead for full send operations only, incremental
sends will have read ahead enabled in a different way by a separate patch.

The following test script was used to measure the improvement on a box
using an average, consumer grade, spinning disk and with 16GiB of RAM:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj
  MKFS_OPTIONS="--nodesize 16384"     # default, just to be explicit
  MOUNT_OPTIONS="-o max_inline=2048"  # default, just to be explicit

  mkfs.btrfs -f $MKFS_OPTIONS $DEV > /dev/null
  mount $MOUNT_OPTIONS $DEV $MNT

  # Create files with inline data to make it easier and faster to create
  # large btrees.
  add_files()
  {
      local total=$1
      local start_offset=$2
      local number_jobs=$3
      local total_per_job=$(($total / $number_jobs))

      echo "Creating $total new files using $number_jobs jobs"
      for ((n = 0; n < $number_jobs; n++)); do
          (
              local start_num=$(($start_offset + $n * $total_per_job))
              for ((i = 1; i <= $total_per_job; i++)); do
                  local file_num=$((start_num + $i))
                  local file_path="$MNT/file_${file_num}"
                  xfs_io -f -c "pwrite -S 0xab 0 2000" $file_path > /dev/null
                  if [ $? -ne 0 ]; then
                      echo "Failed creating file $file_path"
                      break
                  fi
              done
          ) &
          worker_pids[$n]=$!
      done

      wait ${worker_pids[@]}

      sync
      echo
      echo "btree node/leaf count: $(btrfs inspect-internal dump-tree -t 5 $DEV | egrep '^(node|leaf) ' | wc -l)"
  }

  initial_file_count=500000
  add_files $initial_file_count 0 4

  echo
  echo "Creating first snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap1

  echo
  echo "Adding more files..."
  add_files $((initial_file_count / 4)) $initial_file_count 4

  echo
  echo "Updating 1/50th of the initial files..."
  for ((i = 1; i < $initial_file_count; i += 50)); do
      xfs_io -c "pwrite -S 0xcd 0 20" $MNT/file_$i > /dev/null
  done

  echo
  echo "Creating second snapshot..."
  btrfs subvolume snapshot -r $MNT $MNT/snap2

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing full send..."
  start=$(date +%s)
  btrfs send $MNT/snap1 > /dev/null
  end=$(date +%s)
  echo
  echo "Full send took $((end - start)) seconds"

  umount $MNT

  echo 3 > /proc/sys/vm/drop_caches
  blockdev --flushbufs $DEV &> /dev/null
  hdparm -F $DEV &> /dev/null

  mount $MOUNT_OPTIONS $DEV $MNT

  echo
  echo "Testing incremental send..."
  start=$(date +%s)
  btrfs send -p $MNT/snap1 $MNT/snap2 > /dev/null
  end=$(date +%s)
  echo
  echo "Incremental send took $((end - start)) seconds"

  umount $MNT

Before this change, full send duration:

  with $initial_file_count == 200000:  165 seconds
  with $initial_file_count == 500000:  407 seconds

After this change, full send duration:

  with $initial_file_count == 200000:  149 seconds (-10.2%)
  with $initial_file_count == 500000:  353 seconds (-14.2%)

For $initial_file_count == 200000 there are 62600 nodes and leaves in the
btree of the first snapshot, while for $initial_file_count == 500000 there
are 152476 nodes and leaves. The roots were at level 2.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_block_rsv_add can return only ENOSPC since it's called with
NO_FLUSH modifier. This so simplify the logic in
btrfs_delayed_inode_reserve_metadata to exploit this invariant.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add assert and comment ]
Signed-off-by: David Sterba <dsterba@suse.com>

It's only used for tracepoint to obtain the inode number, but we already
have the ino from btrfs_delayed_node::inode_id.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

It's no longer expected to call this function with an open transaction
so all the workarounds concerning this can be removed. In fact it'll
constitute a bug to call this function with a transaction already held
so WARN in this case.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Drop function declarations at the beginning of the file scrub.c. These
functions are defined before they are used in the same file and don't
need forward declaration.

No functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_extent_readonly() checks if the block group is readonly, the bool
return type should be used.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_extent_readonly() is used by can_nocow_extent() in inode.c. So
move it from extent-tree.c to inode.c and declare it as static.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_inc_block_group_ro wants to ensure that the current transaction is
not running dirty block groups, if it is it waits and loops again.
That logic is currently implemented using a goto label. Actually using
a proper do {} while() construct doesn't hurt readability nor does it
introduce excessive nesting and makes the relevant code stand out by
being encompassed in the loop construct. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

No point in duplicating the functionality just use the generic helper
that has the same semantics.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There is small error in comment about BTRFS_ORDERED_* flags, added in
commit 3c198fe0 ("btrfs: rework the order of
btrfs_ordered_extent::flags") but the fixup did not get merged in time.

The 4 types are for ordered extent itself, not for direct io.
Only 3 types support direct io, REGULAR/NOCOW/PREALLOC.

Fix the comment to reflect that.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "Another smaller set of fixes for three of the Arm platforms:

  TI OMAP:

     Fix swapped mmc device order also for omap3 that got changed with
     the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
     aliases should be board specific, all the mmc device instances are
     all there in the SoC, and we do probe them by default so that PM
     runtime can idle the devices if left enabled from the bootloader.

  Qualcomm Snapdragon:

     This bypasses the recently introduced interconnect handling in
     the GENI (serial engine) driver when running off ACPI, as this
     causes the GENI probe to fail and the Lenovo Yoga C630 to boot
     without keyboard and touchpad.

  Allwinner:

     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
     SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
     our headers"

* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
  MAINTAINERS: Match on allwinner keyword
  MAINTAINERS: Add our new mailing-list
  arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
  arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
  ARM: OMAP2+: Fix uninitialized sr_inst
  ARM: dts: Fix swapped mmc order for omap3
  ARM: OMAP2+: Fix warning for omap_init_time_of()
  soc: qcom: geni: shield geni_icc_get() for ACPI boot

Pull ARM fixes from Russell King:

 - Halve maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled

 - Fix conversion for_each_membock() to for_each_mem_range()

 - Fix footbridge PCI mapping

 - Avoid uprobes hooking on thumb instructions

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9071/1: uprobes: Don't hook on thumb instructions
  ARM: footbridge: fix PCI interrupt mapping
  ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to for_each_mem_range()
  ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled

Since uprobes is not supported for thumb, check that the thumb bit is
not set when matching the uprobes instruction hooks.

The Arm UDF instructions used for uprobes triggering
(UPROBE_SWBP_ARM_INSN and UPROBE_SS_ARM_INSN) coincidentally share the
same encoding as a pair of unallocated 32-bit thumb instructions (not
UDF) when the condition code is 0b1111 (0xf). This in effect makes it
possible to trigger the uprobes functionality from thumb, and at that
using two unallocated instructions which are not permanently undefined.
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Cc: stable@vger.kernel.org
Fixes: c7edc9e3 ("ARM: add uprobes support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Pull SCSI fixes from James Bottomley:
 "Two fixes: the libsas fix is for a problem that occurs when trying to
  change the cache type of an ATA device and the libiscsi one is a
  regression fix from this merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: Reset num_scatter if libata marks qc as NODATA
  scsi: iscsi: Fix iSCSI cls conn state

Pull vmwgfx fixes from Dave Airlie:
 "This contains two regression fixes for vmwgfx, one due to a refactor
  which meant locks were being used before initialisation, and the other
  in fixing up some warnings from the core when destroying pinned
  buffers.

  vmwgfx:

   - fixed unpinning before destruction

   - lockdep init reordering"

* tag 'drm-fixes-2021-04-18' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: Make sure bo's are unpinned before putting them back
  drm/vmwgfx: Fix the lockdep breakage
  drm/vmwgfx: Make sure we unpin no longer needed buffers

vmwgfx fixes for regressions in 5.12

Here's a set of 3 patches fixing ugly regressions
in the vmwgfx driver. We broke lock initialization
code and ended up using spinlocks before initialization
breaking lockdep.
Also there was a bit of a fallout from drm changes
which made the core validate that unreferenced buffers
have been unpinned. vmwgfx pinning code predates a lot
of the core drm and wasn't written to account for those
semantics. Fortunately changes required to fix it
are not too intrusive.
The changes have been validated by our internal ci.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f7add0a2-162e-3bd2-b1be-344a94f2acbf@vmware.com

Pull i2c fix from Wolfram Sang:
 "One more driver bugfix for I2C"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mv64xxx: Fix random system lock caused by runtime PM

This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.

Nobody should use this interface unless you still have binaries from
1991, but let's do it right.

This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places.  So let's make sure the _old_ users do it
all right and proper, before we add new ones.

See also commit 8a23eb80 ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:

    Note that I didn't bother adding the checks to any legacy interfaces
    that nobody uses.

which this now corrects.  Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.

[ Another option would be to remove the support for this particular very
  old interface: any binaries that use it are likely a.out binaries, and
  they will no longer run anyway since we removed a.out binftm support
  in commit eac61655 ("x86: Deprecate a.out support").

  But I'm not sure which came first: getdents() or ELF support, so let's
  pretend somebody might still have a working binary that uses the
  legacy readdir() case.. ]

Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc8, including fixes from netfilter, and
  bpf. BPF verifier changes stand out, otherwise things have slowed
  down.

  Current release - regressions:

   - gro: ensure frag0 meets IP header alignment

   - Revert "net: stmmac: re-init rx buffers when mac resume back"

   - ethernet: macb: fix the restore of cmp registers

  Previous releases - regressions:

   - ixgbe: Fix NULL pointer dereference in ethtool loopback test

   - ixgbe: fix unbalanced device enable/disable in suspend/resume

   - phy: marvell: fix detection of PHY on Topaz switches

   - make tcp_allowed_congestion_control readonly in non-init netns

   - xen-netback: Check for hotplug-status existence before watching

  Previous releases - always broken:

   - bpf: mitigate a speculative oob read of up to map value size by
     tightening the masking window

   - sctp: fix race condition in sctp_destroy_sock

   - sit, ip6_tunnel: Unregister catch-all devices

   - netfilter: nftables: clone set element expression template

   - netfilter: flowtable: fix NAT IPv6 offload mangling

   - net: geneve: check skb is large enough for IPv4/IPv6 header

   - netlink: don't call ->netlink_bind with table lock held"

* tag 'net-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
  netlink: don't call ->netlink_bind with table lock held
  MAINTAINERS: update my email
  bpf: Update selftests to reflect new error states
  bpf: Tighten speculative pointer arithmetic mask
  bpf: Move sanitize_val_alu out of op switch
  bpf: Refactor and streamline bounds check into helper
  bpf: Improve verifier error messages for users
  bpf: Rework ptr_limit into alu_limit and add common error path
  bpf: Ensure off_reg has no mixed signed bounds for all types
  bpf: Move off_reg into sanitize_ptr_alu
  bpf: Use correct permission flag for mixed signed bounds arithmetic
  ch_ktls: do not send snd_una update to TCB in middle
  ch_ktls: tcb close causes tls connection failure
  ch_ktls: fix device connection close
  ch_ktls: Fix kernel panic
  i40e: fix the panic when running bpf in xdpdrv mode
  net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
  net/mlx5e: Fix setting of RS FEC mode
  net/mlx5: Fix setting of devlink traps in switchdev mode
  Revert "net: stmmac: re-init rx buffers when mac resume back"
  ...

Merge tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "The largest change is for a regression that landed during -rc1 for
  block-device read-only handling. Vaibhav found a new use for the
  ability (originally introduced by virtio_pmem) to call back to the
  platform to flush data, but also found an original bug in that
  implementation. Lastly, Arnd cleans up some compile warnings in dax.

  This has all appeared in -next with no reported issues.

  Summary:

   - Fix a regression of read-only handling in the pmem driver

   - Fix a compile warning

   - Fix support for platform cache flush commands on powerpc/papr"

* tag 'libnvdimm-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC
  libnvdimm: Notify disk drivers to revalidate region read-only
  dax: avoid -Wempty-body warnings

Pull CXL memory class fixes from Dan Williams:
 "A collection of fixes for the CXL memory class driver introduced in
  this release cycle.

  The driver was primarily developed on a work-in-progress QEMU
  emulation of the interface and we have since found a couple places
  where it hid spec compliance bugs in the driver, or had a spec
  implementation bug itself.

  The biggest change here is replacing a percpu_ref with an rwsem to
  cleanup a couple bugs in the error unwind path during ioctl device
  init. Lastly there were some minor cleanups to not export the
  power-management sysfs-ABI for the ioctl device, use the proper sysfs
  helper for emitting values, and prevent subtle bugs as new
  administration commands are added to the supported list.

  The bulk of it has appeared in -next save for the top commit which was
  found today and validated on a fixed-up QEMU model.

  Summary:

   - Fix support for CXL memory devices with registers offset from the
     BAR base.

   - Fix the reporting of device capacity.

   - Fix the driver commands list definition to be disconnected from the
     UAPI command list.

   - Replace percpu_ref with rwsem to fix initialization error path.

   - Fix leaks in the driver initialization error path.

   - Drop the power/ directory from CXL device sysfs.

   - Use the recommended sysfs helper for attribute 'show'
     implementations"

* tag 'cxl-fixes-for-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/mem: Fix memory device capacity probing
  cxl/mem: Fix register block offset calculation
  cxl/mem: Force array size of mem_commands[] to CXL_MEM_COMMAND_ID_MAX
  cxl/mem: Disable cxl device power management
  cxl/mem: Do not rely on device_add() side effects for dev_set_name() failures
  cxl/mem: Fix synchronization mechanism for device removal vs ioctl operations
  cxl/mem: Use sysfs_emit() for attribute show routines

Merge misc fixes from Andrew Morton:
 "12 patches.

  Subsystems affected by this patch series: mm (documentation, kasan,
  and pagemap), csky, ia64, gcov, and lib"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib: remove "expecting prototype" kernel-doc warnings
  gcov: clang: fix clang-11+ build
  mm: ptdump: fix build failure
  mm/mapping_dirty_helpers: guard hugepage pud's usage
  ia64: tools: remove duplicate definition of ia64_mf() on ia64
  ia64: tools: remove inclusion of ia64-specific version of errno.h header
  ia64: fix discontig.c section mismatches
  ia64: remove duplicate entries in generic_defconfig
  csky: change a Kconfig symbol name to fix e1000 build error
  kasan: remove redundant config option
  kasan: fix hwasan build for gcc
  mm: eliminate "expecting prototype" kernel-doc warnings

The CXL Identify Memory Device output payload emits capacity in 256MB
units. The driver is treating the capacity field as bytes. This was
missed because QEMU reports bytes when it should report bytes / 256MB.

Fixes: 8adaf747 ("cxl/mem: Find device capabilities")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/161862021044.3259705.7008520073059739760.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

When I added support to allow generic netlink multicast groups to be
restricted to subscribers with CAP_NET_ADMIN I was unaware that a
genl_bind implementation already existed in the past.

It was reverted due to ABBA deadlock:

1. ->netlink_bind gets called with the table lock held.
2. genetlink bind callback is invoked, it grabs the genl lock.

But when a new genl subsystem is (un)registered, these two locks are
taken in reverse order.

One solution would be to revert again and add a comment in genl
referring 1e82a62f, "genetlink: remove genl_bind").

This would need a second change in mptcp to not expose the raw token
value anymore, e.g.  by hashing the token with a secret key so userspace
can still associate subflow events with the correct mptcp connection.

However, Paolo Abeni reminded me to double-check why the netlink table is
locked in the first place.

I can't find one.  netlink_bind() is already called without this lock
when userspace joins a group via NETLINK_ADD_MEMBERSHIP setsockopt.
Same holds for the netlink_unbind operation.

Digging through the history, commit f7736080
("netlink: access nlk groups safely in netlink bind and getname")
expanded the lock scope.

commit 3a20773b ("net: netlink: cap max groups which will be considered in netlink_bind()")
... removed the nlk->ngroups access that the lock scope
extension was all about.

Reduce the lock scope again and always call ->netlink_bind without
the table lock.

The Fixes tag should be vs. the patch mentioned in the link below,
but that one got squash-merged into the patch that came earlier in the
series.

Fixes: 4d54cc32 ("mptcp: avoid lock_fast usage in accept path")
Link: https://lore.kernel.org/mptcp/20210213000001.379332-8-mathew.j.martineau@linux.intel.com/T/#u
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Sean Tranchetti <stranche@codeaurora.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull io_uring fix from Jens Axboe:
 "Fix for a potential hang at exit with SQPOLL from Pavel"

* tag 'io_uring-5.12-2021-04-16' of git://git.kernel.dk/linux-block:
  io_uring: fix early sqd_list removal sqpoll hangs

Fix various kernel-doc warnings in lib/ due to missing or erroneous
function names.

Add kernel-doc for some function parameters that was missing.  Use
kernel-doc "Return:" notation in earlycpio.c.

Quietens the following warnings:

  lib/earlycpio.c:61: warning: expecting prototype for cpio_data find_cpio_data(). Prototype was for find_cpio_data() instead

  lib/lru_cache.c:640: warning: expecting prototype for lc_dump(). Prototype was for lc_seq_dump_details() instead
  lru_cache.c:90: warning: Function parameter or member 'cache' not described in 'lc_create'

  lib/parman.c:368: warning: expecting prototype for parman_item_del(). Prototype was for parman_item_remove() instead
  parman.c:309: warning: Excess function parameter 'prority' description in 'parman_prio_init'

  lib/radix-tree.c:703: warning: expecting prototype for __radix_tree_insert(). Prototype was for radix_tree_insert() instead
  radix-tree.c:180: warning: Excess function parameter 'addr' description in 'radix_tree_find_next_bit'
  radix-tree.c:180: warning: Excess function parameter 'size' description in 'radix_tree_find_next_bit'
  radix-tree.c:931: warning: Function parameter or member 'iter' not described in 'radix_tree_iter_replace'

Link: https://lkml.kernel.org/r/20210411221756.15461-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With clang-11+, the code is broken due to my kvmalloc() conversion
(which predated the clang-11 support code) leaving one vmalloc() in
place.  Fix that.

Link: https://lkml.kernel.org/r/20210412214210.6e1ecca9cdc5.I24459763acf0591d5e6b31c7e3a59890d802f79c@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

READ_ONCE() cannot be used for reading PTEs.  Use ptep_get() instead, to
avoid the following errors:

    CC      mm/ptdump.o
  In file included from <command-line>:
  mm/ptdump.c: In function 'ptdump_pte_entry':
  include/linux/compiler_types.h:320:38: error: call to '__compiletime_assert_207' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |                                      ^
  include/linux/compiler_types.h:301:4: note: in definition of macro '__compiletime_assert'
    301 |    prefix ## suffix();    \
        |    ^~~~~~
  include/linux/compiler_types.h:320:2: note: in expansion of macro '_compiletime_assert'
    320 |  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |  ^~~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:36:2: note: in expansion of macro 'compiletime_assert'
     36 |  compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
        |  ^~~~~~~~~~~~~~~~~~
  include/asm-generic/rwonce.h:49:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
     49 |  compiletime_assert_rwonce_type(x);    \
        |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  mm/ptdump.c:114:14: note: in expansion of macro 'READ_ONCE'
    114 |  pte_t val = READ_ONCE(*pte);
        |              ^~~~~~~~~
  make[2]: *** [mm/ptdump.o] Error 1

See commit 481e980a ("mm: Allow arches to provide ptep_get()") and
commit c0e1c8c2 ("powerpc/8xx: Provide ptep_get() with 16k pages")
for details.

Link: https://lkml.kernel.org/r/912b349e2bcaa88939904815ca0af945740c6bd4.1618478922.git.christophe.leroy@csgroup.eu
Fixes: 30d621f6 ("mm: add generic ptdump")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Mapping dirty helpers have, so far, been only used on X86, but a port of
vmwgfx to ARM64 exposed a problem which results in a compilation error
on ARM64 systems:

  mm/mapping_dirty_helpers.c: In function `wp_clean_pud_entry':
  mm/mapping_dirty_helpers.c:172:32: error: implicit declaration of function `pud_dirty'; did you mean `pmd_dirty'? [-Werror=implicit-function-declaration]

This is due to the fact that mapping_dirty_helpers code assumes that
pud_dirty is always defined, which is not the case for architectures
that don't define CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.

ARM64 arch is a little inconsistent when it comes to PUD hugepage
helpers, e.g. it defines pud_young but not pud_dirty but regardless of
that the core kernel code shouldn't assume that any of the PUD hugepage
helpers are available unless CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
is defined.  This prevents compilation errors whenever one of the
drivers is ported to new architectures.

Link: https://lkml.kernel.org/r/20210409165151.694574-1-zackr@vmware.comSigned-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrm (Intel) <thomas_os@shipmail.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is
already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf
failing to build:

    CC       /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o
  In file included from /usr/src/linux/tools/include/asm/barrier.h:24,
                   from /usr/src/linux/tools/include/linux/ring_buffer.h:4,
                   from libbpf.c:37:
  /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror]
     43 | #define ia64_mf()       asm volatile ("mf" ::: "memory")
        |
  In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20,
                   from /usr/include/ia64-linux-gnu/asm/swab.h:11,
                   from /usr/include/linux/swab.h:8,
                   from /usr/include/linux/byteorder/little_endian.h:13,
                   from /usr/include/ia64-linux-gnu/asm/byteorder.h:5,
                   from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20,
                   from libbpf.c:36:
  /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition
    382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory")
        |
  cc1: all warnings being treated as errors

Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no longer an ia64-specific version of the errno.h header below
arch/ia64/include/uapi/asm/, so trying to build tools/bpf fails with:

    CC       /usr/src/linux/tools/bpf/bpftool/btf_dumper.o
  In file included from /usr/src/linux/tools/include/linux/err.h:8,
                   from btf_dumper.c:11:
  /usr/src/linux/tools/include/uapi/asm/errno.h:13:10: fatal error: ../../../arch/ia64/include/uapi/asm/errno.h: No such file or directory
     13 | #include "../../../arch/ia64/include/uapi/asm/errno.h"
        |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  compilation terminated.

Thus, just remove the inclusion of the ia64-specific errno.h so that the
build will use the generic errno.h header on this target which was used
there anyway as the ia64-specific errno.h was just a wrapper for the
generic header.

Fixes: c25f867d ("ia64: remove unneeded uapi asm-generic wrappers")
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix IA64 discontig.c Section mismatch warnings.

When CONFIG_SPARSEMEM=y and CONFIG_MEMORY_HOTPLUG=y, the functions
computer_pernodesize() and scatter_node_data() should not be marked as
__meminit because they are needed after init, on any memory hotplug
event.  Also, early_nr_cpus_node() is called by compute_pernodesize(),
so early_nr_cpus_node() cannot be __meminit either.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1612): Section mismatch in reference from the function arch_alloc_nodedata() to the function .meminit.text:compute_pernodesize()
  The function arch_alloc_nodedata() references the function __meminit compute_pernodesize().
  This is often because arch_alloc_nodedata lacks a __meminit annotation or the annotation of compute_pernodesize is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1692): Section mismatch in reference from the function arch_refresh_nodedata() to the function .meminit.text:scatter_node_data()
  The function arch_refresh_nodedata() references the function __meminit scatter_node_data().
  This is often because arch_refresh_nodedata lacks a __meminit annotation or the annotation of scatter_node_data is wrong.

  WARNING: modpost: vmlinux.o(.text.unlikely+0x1502): Section mismatch in reference from the function compute_pernodesize() to the function .meminit.text:early_nr_cpus_node()
  The function compute_pernodesize() references the function __meminit early_nr_cpus_node().
  This is often because compute_pernodesize lacks a __meminit annotation or the annotation of early_nr_cpus_node is wrong.

Link: https://lkml.kernel.org/r/20210411001201.3069-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix ia64 generic_defconfig duplicate entries, as warned by:

  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA:  => 58
  arch/ia64/configs/generic_defconfig: warning: override: reassigning to symbol ATA_PIIX:  => 59

These 2 symbols still have the same value as in the removed lines.

Link: https://lkml.kernel.org/r/20210411020255.18052-1-rdunlap@infradead.org
Fixes: c331649e ("ia64: Use libata instead of the legacy ide driver in defconfigs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

e1000's #define of CONFIG_RAM_BASE conflicts with a Kconfig symbol in
arch/csky/Kconfig.

The symbol in e1000 has been around longer, so change arch/csky/ to use
DRAM_BASE instead of RAM_BASE to remove the conflict.  (although e1000
is also a 2-line change)

Link: https://lkml.kernel.org/r/20210411055335.7111-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable.  see [1].

When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.

This patch fixes the following compilation warning:

  include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]

[akpm@linux-foundation.org: fix merge snafu]

Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c8 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-11 adds support for -fsanitize=kernel-hwaddress, so it becomes
possible to enable CONFIG_KASAN_SW_TAGS.

Unfortunately this fails to build at the moment, because the
corresponding command line arguments use llvm specific syntax.

Change it to use the cc-param macro instead, which works on both clang
and gcc.

[elver@google.com: fixup for "kasan: fix hwasan build for gcc"]
  Link: https://lkml.kernel.org/r/YHQZVfVVLE/LDK2v@elver.google.com

Link: https://lkml.kernel.org/r/20210323124112.1229772-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix stray kernel-doc warnings in mm/ due to mis-typed or missing function
names.

Quietens these kernel-doc warnings:

  mm/mmu_gather.c:264: warning: expecting prototype for tlb_gather_mmu(). Prototype was for __tlb_gather_mmu() instead
  mm/oom_kill.c:180: warning: expecting prototype for Check whether unreclaimable slab amount is greater than(). Prototype was for should_dump_unreclaim_slab() instead
  mm/shuffle.c:155: warning: expecting prototype for shuffle_free_memory(). Prototype was for __shuffle_free_memory() instead

Link: https://lkml.kernel.org/r/20210411210642.11362-1-rdunlap@infradead.orgSigned-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>