Reverted due to problems reported by users
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/i2c-2.6

Fix init & exit section usages, beginning with this diagnostic
from reference_discarded.pl (make buildcheck):
Error: ./drivers/i2c/busses/i2c-ali1563.o .data refers to 00000278 R_386_32          .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch (3rd time's a charm) adds support for the SMSC LPC47B397-NC
sensor chip.  It was sponsored by In-Store Broadcasting Network.

Signed-off-by: Craig Kelly (In-Store Broadcasting Network)
Signed-off-by: Glenn Ball (Utilitek Systems, Inc.)
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

On x86-64, the attached patch is required to fix

> kernel/sys.c: In function `sys_setsid':
> kernel/sys.c:1078: error: `tty_sem' undeclared (first use in this function)
> kernel/sys.c:1078: error: (Each undeclared identifier is reported only once
> kernel/sys.c:1078: error: for each function it appears in.)

kernel/sys.c needs the tty_sem declaration from linux/tty.h.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* add drive->media != ide_disk check to ide_abort()
* kill ide_cdrom_abort() and idedisk_abort()
* split __ide_abort() out of ide_abort()
* call driver->abort() inside ide_abort()
* convert the only user of driver->abort()
* fix default_abort() and idescsi_atapi_abort()
* make idescsi_atapi_abort() static
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* split __ide_error() out of ide_error()
* call driver->error() inside ide_error()
* convert all users of driver->error()
* fix default_cleanup() and idescsi_atapi_error()
* make idescsi_atapi_error() static
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* move idedisk_error() and ide_cdrom_error() to ide-io.c
* rename idedisk_error() to ide_ata_error()
* rename ide_cdrom_error() to ide_atapi_error()
* use ide_{ata,atapi}_error() in ide_error()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* move idedisk_dump_status() and ide_dump_status() to ide-lib.c
* rename idedisk_dump_status() to ide_dump_ata_status()
* use ide_dump_{ata,atapi}_status() in ide_dump_status()
* use ide_dump_status() in ide-cd.c, ide-disk.c and ide-scsi.c
* make ide_dump_opcode() and ide_dump_atapi_status)() static
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* add it to ide-lib.c and cleanup ide{disk}_dump_status()
* as a bonus it fixes unknown opcode reporting in ide_dump_status()
* use ide_dump_opcode() in ide_dump_atapi_status()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

also kill default_sense() in ide.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Jim Paris <jim@jtan.com>

Bartlomiej: I have an ICH3-M controller on my laptop.  The BIOS is
leaving the prog-if as 0x8E (primary = legacy, secondary = native).
When the PCI interrupt is routed (either in the IDE driver's
pci_enable_device, or earlier if pci=routeirq is used), unhandled
interrupts cause IRQ 9 to be disabled, breaking most of my other
hardware.  This seems to be caused by having the nonexistant secondary
interface set to native mode.  According to the datasheet I checked,
having different modes for primary/secondary is not an allowed
combination anyway, so the following PCI quirk checks for this case
and forces both interfaces to legacy if true.

It may make sense to make this more generic (this problem may affect
other PCI IDs as well), or it may be better solved in the IDE driver,
at least when pci=routeirq is not used.  But the following patch does
work well for me.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Prarit Bhargava <prarit@sgi.com>

Please see discussion related to this patch here,

http://marc.theaimsgroup.com/?l=linux-ide&m=110485007824374&w=2Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Ben did not disagree to hide the 3 additional lines printed when booting
my ibook with the 'quiet' cmdline option.
I think these debug printk have no real value for normal operation.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Reported to work OK by Daniel Robitaille <robitaille@gmail.com>.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Mon, 03 Jan 2005 21:44:33 +0000, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
>
> Different PCI functions are but nothing requires that the PCI function
> that is the IDE controller is only the IDE controller. In some cases
> other logic lives in the "spare" BAR register areas of the device.
>
> One example where the weird design makes it obvious is the CS5520. Here
> the 5520 bridge has the IDE in one BAR and all sorts of other logic
> (including the xBUS virtual ISA environment) in the same PCI function.
> On that chip a pci_disable_device on the IDE pci_dev turns off mundane
> things like the timer chips keyboard and mouse 8).
>
> Other vendors do equally evil things and providing the chip reports IDE
> class and has the IDE BARs set up nobody else is any the wiser and
> presumably gate count goes down.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Oh, bugger...

The recent mmzone.h change triggered some very, very ugly things in
next_zone(), is_highmem(), is_normal() and zone_idx() because it changed
the size of "struct zone" subtly.

Pointer subtraction is no fun when sizeof of object gets weird and poor
gcc blows its brains out trying to optimize that...  This slowed down an
ARM cross-build by a factor of 2.5. 

Turn the pointer subtraction tests into pointer addition tests instead
where possible, making them trivial to deal with (and gets better code,
in addition to faster compile).

zone_idx() still does a subtraction.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Dave Jiang

Signed-off-by: Dave Jiang

Latest IOP official release of redboot now supports the proper machine IDs for all IOP platforms and also pass in the correct amount of memory available via ATAG. Removing hard coded stuff now that we can get the proper info from redboot.
Signed-off-by: Russell King

Patch from Dave Jiang

Signed-off-by: Dave Jiang

Major cleanup of the IOP33x family platform PCI defines. Hopefully should be more coherent and removed some magic numbers. Also should be finalized with the latest redboot ATU config.
Signed-off-by: Russell King

Patch from Dave Jiang

Signed-off-by: Dave Jiang

Move the VMALLOC_END to 0xfe000000 from 0xe8000000 to increase the amount of physical memory addressable on XScale IOP platforms.
Signed-off-by: Russell King

Patch from George Joseph

Corrects the IXP4XX_USB_BASE offset to be 0xB000 instead of overlapping TIMER at 0x5000.  Also adds IXP4XX_QMGR_BASE and offsets for EthA and EthB.

Signed-off-by: George T. Joseph
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Use the existing "tty_sem" to protect against the process tty changes
too.

The isicom driver had bitrotted badly and although it had some 2.6
cleanup work didn't actually do anything useful.  ISIcom had their own
2.4 driver which didn't work with 2.6 either but had done the hard work
like the locking rewrites.  So I nailed them together and then fixed
some obvious bugs in the ISIcom driver version.

Make COSA ioctl numbers compatible with previous kernels.
Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes crash on insmod of the cosa.ko module - the sppp_attach() was
called too early when dev->priv has not been set up yet. 
Signed-off-by: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is already declared in asm-generic/sections.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

they use clear_page, which in turn uses ppc64_caches so it needs to be
exported.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The patch below fixes an obviously wrong dependency.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Usual workaround for the gcc-2.95.x macro expansion bug.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

this patch adds the missing pte_read function and makes s390 compile again.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6