Nothing populates them yet.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently there is no counter-allocating machinery to connect the
 resulting counter update values to; that will be added in a
 subsequent patch.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Start and stop MAE counter streaming, and grant credits.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TC extra channel will need its own special RX handling, which must
 operate before any code that expects the RX buffer to contain a network
 packet; buffers on this RX queue contain MAE counter packets in a
 special format that does not resemble an Ethernet frame, and many fields
 of the RX packet prefix are not populated.
The USER_MARK field, however, is populated with the generation count from
 the counter subsystem, which needs to be passed on to the RX handler.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TC extra channel needs to do extra work in efx_{start,stop}_channels()
 to start/stop MAE counter streaming from the hardware.  Add callbacks for
 it to implement.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

EF100 hardware streams MAE counter updates to the driver over a dedicated
 RX queue; however, the MCPU is not able to detect when RX buffers have
 been posted to the ring.  Thus, the driver must call
 MC_CMD_MAE_COUNTERS_STREAM_GIVE_CREDITS; this patch adds the
 infrastructure to support that to the core RXQ handling code.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Macro PREFIX_WIDTH_MASK uses unsigned long arithmetic for a shift of up
 to 32 bits, which breaks on 32-bit systems.  This did not previously
 show up as we weren't using any fields of width 32, but we now need to
 access ESF_GZ_RX_PREFIX_USER_MARK.
Change it to unsigned long long.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Remove phylink_validate() from Felix DSA driver

The Felix DSA driver still uses its own phylink_validate() procedure
rather than the (relatively newly introduced) phylink_generic_validate()
because the latter did not cater for the case where a PHY provides rate
matching between the Ethernet cable side speed and the SERDES side
speed (and does not advertise other speeds except for the SERDES speed).

This changed with Sean Anderson's generic support for rate matching PHYs
in phylib and phylink:
https://patchwork.kernel.org/project/netdevbpf/cover/20220920221235.1487501-1-sean.anderson@seco.com/

Building upon that support, this patch set makes Linux understand that
the PHYs used in combination with the Felix DSA driver (SCH-30841 riser
card with AQR412 PHY, used with SERDES protocol 0x7777 - 4x2500base-x,
plugged into LS1028A-QDS) do support PAUSE rate matching. This requires
Aquantia PHY driver support for new PHY IDs.

To activate the rate matching support in phylink, config->mac_capabilities
must be populated. Coincidentally, this also opts the Felix driver into
the generic phylink validation.

Next, code that is no longer necessary is eliminated. This includes the
Felix driver validation procedures for VSC9959 and VSC9953, the
workaround in the Ocelot switch library to leave RX flow control always
enabled, as well as DSA plumbing necessary for a custom phylink
validation procedure to be propagated to the hardware driver level.

Many thanks go to Sean Anderson for providing generic support for rate
matching.
====================

Link: https://lore.kernel.org/r/20221114170730.2189282-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As of now, no DSA driver uses a custom link mode validation procedure
anymore. So remove this DSA operation and let phylink determine what is
supported based on config->mac_capabilities (if provided by the driver).
Leave a comment why we left the code that we did, and that there is more
work to do.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As phylink gained generic support for PHYs with rate matching via PAUSE
frames, the phylink_mac_link_up() method will be called with the maximum
speed and with rx_pause=true if rate matching is in use. This means that
setups with 2500base-x as the SERDES protocol between the MAC/PCS and
the PHY now work with no need for the driver to do anything special.

Tested with fsl-ls1028a-qds-7777.dts.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Drop the custom implementation of phylink_validate() in favor of the
generic one, which requires config->mac_capabilities to be set.

This was used up until now because of the possibility of being paired
with Aquantia PHYs with support for rate matching. The phylink framework
gained generic support for these, and knows to advertise all 10/100/1000
lower speed link modes when our SERDES protocol is 2500base-x
(fixed speed).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These are Gen3 Aquantia N-BASET PHYs which support 5GBASE-T,
2.5GBASE-T, 1000BASE-T and 100BASE-TX (not 10G); also EEE, Sync-E,
PTP, PoE.

The 112 is a single PHY package, the 412 is a quad PHY package.

The system-side SERDES interface of these PHYs selects its protocol
depending on the negotiated media side link speed. That protocol can be
1000BASE-X, 2500BASE-X, 10GBASE-R, SGMII, USXGMII.

The configuration of which SERDES protocol to use for which link speed
is made by firmware; even though it could be overwritten over MDIO by
Linux, we assume that the firmware provisioning is ok for the board on
which the driver probes.

For cases when the system side runs at a fixed rate, we want phylib/phylink
to detect the PAUSE rate matching ability of these PHYs, so we need to
use the Aquantia rather than the generic C45 driver. This needs
aqr107_read_status() -> aqr107_read_rate() to set phydev->rate_matching,
as well as the aqr107_get_rate_matching() method.

I am a bit unsure about the naming convention in the driver. Since
AQR107 is a Gen2 PHY, I assume all functions prefixed with "aqr107_"
rather than "aqr_" mean Gen2+ features. So I've reused this naming
convention.

I've tested PHY "SGMII" statistics as well as the .link_change_notify
method, which prints:

Aquantia AQR412 mdio_mux-0.4:00: Link partner is Aquantia PHY, FW 4.3, fast-retrain downshift advertised, fast reframe advertised

Tested SERDES protocols are usxgmii and 2500base-x (the latter with
PAUSE rate matching). Tested link modes are 100/1000/2500 Base-T
(with Aquantia link partner and with other link partners). No notable
events observed.

The placement of these PHY IDs in the driver is right before AQR113C,
a Gen4 PHY.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

1) Fix sparse warning in the new nft_inner expression, reported
   by Jakub Kicinski.

2) Incorrect vlan header check in nft_inner, from Peng Wu.

3) Two patches to pass reset boolean to expression dump operation,
   in preparation for allowing to reset stateful expressions in rules.
   This adds a new NFT_MSG_GETRULE_RESET command. From Phil Sutter.

4) Inconsistent indentation in nft_fib, from Jiapeng Chong.

5) Speed up siphash calculation in conntrack, from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: conntrack: use siphash_4u64
  netfilter: rpfilter/fib: clean up some inconsistent indenting
  netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET
  netfilter: nf_tables: Extend nft_expr_ops::dump callback parameters
  netfilter: nft_inner: fix return value check in nft_inner_parse_l2l3()
  netfilter: nft_payload: use __be16 to store gre version
====================

Link: https://lore.kernel.org/r/20221115095922.139954-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The NFP documentation is updated to include information about Corigine,
and the new NFP3800 chips. The 'Acquiring Firmware' section is updated
with new information about where to find firmware.

Two new sections are added to expand the coverage of the documentation.
The new sections include:
- Devlink Info
- Configure Device
Signed-off-by: Walter Heymans <walter.heymans@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221115090834.738645-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Felix Fietkau says:

====================
mtk_eth_soc rx vlan offload improvement + dsa hardware untag support

This series improves rx vlan offloading on mtk_eth_soc and extends it to
support hardware DSA untagging where possible.
This improves performance by avoiding calls into the DSA tag driver receive
function, including mangling of skb->data.

This is split out of a previous series, which added other fixes and
multiqueue support
====================

Link: https://lore.kernel.org/r/20221114124214.58199-1-nbd@nbd.nameSigned-off-by: Jakub Kicinski <kuba@kernel.org>

- pass the tag to DSA via metadata dst
- disabled on 7986 for now, since it's not working yet
- disabled if a MAC is enabled that does not use DSA

This improves performance by bypassing the DSA tag driver and avoiding extra
skb data mangling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Keep the vlan rx offload feature in sync across all netdevs belonging to the
device, since the feature is global and can't be turned off per MAC
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the id from the DMA descriptor instead of hardcoding 802.1q
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If a metadata dst is present with the type METADATA_HW_PORT_MUX on a dsa cpu
port netdev, assume that it carries the port number and that there is no DSA
tag present in the skb data.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch fixes a frame size warning, reported by kernel test robot.

>> net/dcb/dcbnl.c:1230:1: warning: the frame size of 1244 bytes is
>> larger than 1024 bytes [-Wframe-larger-than=]

The getapptrust part of dcbnl_ieee_fill is moved to a separate function,
and the selector array is now dynamically allocated, instead of stack
allocated.

Tested on microchip sparx5 driver.

Fixes: 6182d587 ("net: dcb: add new apptrust attribute")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20221114092950.2490451-1-daniel.machon@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This function is used for every packet, siphash_4u64 is noticeably faster
than using local buffer + siphash:

Before:
  1.23%  kpktgend_0       [kernel.vmlinux]     [k] __siphash_unaligned
  0.14%  kpktgend_0       [nf_conntrack]       [k] hash_conntrack_raw
After:
  0.79%  kpktgend_0       [kernel.vmlinux]     [k] siphash_4u64
  0.15%  kpktgend_0       [nf_conntrack]       [k] hash_conntrack_raw

In the pktgen test this gives about ~2.4% performance improvement.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

No functional modification involved.

net/ipv4/netfilter/nft_fib_ipv4.c:141 nft_fib4_eval() warn: inconsistent indenting.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2733Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Analogous to NFT_MSG_GETOBJ_RESET, but for rules: Reset stateful
expressions like counters or quotas. The latter two are the only
consumers, adjust their 'dump' callbacks to respect the parameter
introduced earlier.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Add a 'reset' flag just like with nft_object_ops::dump. This will be
useful to reset "anonymous stateful objects", e.g. simple rule counters.

No functional change intended.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The SYN flood message prints the listening port number, but with many
processes bound to the same port on different IPs, it's impossible to
tell which socket is the problem.

Add the listen IP address to the SYN flood message.

For IPv6 use "[IP]:port" as per RFC-5952 and to provide ease of
copy-paste to "ss" filters. For IPv4 use "IP:port" to match.

Each protcol's "any" address and a host address now look like:

 Possible SYN flooding on port 0.0.0.0:9001.
 Possible SYN flooding on port 127.0.0.1:9001.
 Possible SYN flooding on port [::]:9001.
 Possible SYN flooding on port [fc00::1]:9001.
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://lore.kernel.org/r/4fedab7ce54a389aeadbdc639f6b4f4988e9d2d7.1668386107.git.jamie.bainbridge@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Thomas Gleixner says:

====================
genirq/msi: Treewide cleanup of pointless linux/msi.h includes

While working on per device MSI domains I noticed that quite some files
include linux/msi.h just because.

The top level comment in the header file clearly says:

  Regular device drivers have no business with any of these functions....

and actually none of the drivers needs anything from msi.h.
====================

Link: https://lore.kernel.org/r/20221113201935.776707081@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Nothing in these files needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: oss-drivers@corigine.com
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Nothing in these file needs anything from linux/msi.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If CONFIG_PTP_1588_CLOCK_OPTIONAL=m and CONFIG_RENESAS_ETHER_SWITCH=y,
the following build error happened:

    aarch64-linux-ld: DWARF error: could not find abbrev number 60
    drivers/net/ethernet/renesas/rswitch.o: in function `rswitch_get_ts_info':
    rswitch.c:(.text+0x408): undefined reference to `ptp_clock_index'
    aarch64-linux-ld: DWARF error: could not find abbrev number 1190123
    drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_register':
    rcar_gen4_ptp.c:(.text+0x4dc): undefined reference to `ptp_clock_register'
    aarch64-linux-ld: drivers/net/ethernet/renesas/rcar_gen4_ptp.o: in function `rcar_gen4_ptp_unregister':
    rcar_gen4_ptp.c:(.text+0x584): undefined reference to `ptp_clock_unregister'

To fix the issue, add "depends on PTP_1588_CLOCK_OPTIONAL" into the
Kconfig.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 6c6fa1a0 ("net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221110012720.3552060-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
mlx5-updates-2022-11-12

Misc updates to mlx5 driver

1) Support enhanced CQE compression, on ConnectX6-Dx
   Reduce irq rate, cpu utilization and latency.

2) Connection tracking: Optimize the pre_ct table lookup for rules
   installed on chain 0.

3) implement ethtool get_link_ext_stats for PHY down events

4) Expose device vhca_id to debugfs

5) misc cleanups and trivial changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Added xdp and page pool statistics.
In order to make the implementation simple and compatible, the patch
uses the 32bit integer to record the XDP statistics.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
net: Add support for sorted VCAP rules in Sparx5

This provides support for adding Sparx5 VCAP rules in sorted order, VCAP
rule counters and TC filter matching on ARP frames.

It builds on top of the initial IS2 VCAP support found in these series:

https://lore.kernel.org/all/20221020130904.1215072-1-steen.hegelund@microchip.com/
https://lore.kernel.org/all/20221109114116.3612477-1-steen.hegelund@microchip.com/

Functionality
=============

When a new VCAP rule is added the driver will now ensure that the rule is
inserted in sorted order, and when a rule is removed, the remaining rules
will be moved to keep the sorted order and remove any gaps in the VCAP
address space.

A VCAP rule is ordered using these 3 values:

 - Rule size: the count of VCAP addresses used by the rule.  The largest
   rule have highest priority

 - Rule User: The rules are ordered by the user enumeration

 - Priority: The priority provided in the flower filter.  The lowest value
   has the highest priority.

A VCAP instance may contain the counter as part of the VCAP cache area, and
this counter may be one or more bits in width.  This type of counter
automatically increments its value when the rule is hit.

Other VCAP instances have a dedicated counter area outside of the VCAP and
in this case the rule must contain the counter id to be able to locate the
counter value and cause the counter to be incremented.  In this case there
must also be a VCAP rule action that sets the counter id.

The Sparx5 IS2 VCAP uses a dedicated counter area with 32bit counters.

This series adds support for getting VCAP rule counters and provide these
via the TC statistic interface.

This only support packet counters, not byte counters.

Finally the series adds support for the ARP frame dissector and configures
the Sparx5 IS2 VCAP to generate the ARP keyset when ARP traffic is
received.

Delivery:
=========

This is current plan for delivering the full VCAP feature set of Sparx5:

- DebugFS support for inspecting rules
- TC protocol all support
- Sparx5 IS0 VCAP support
- TC policer and drop action support (depends on the Sparx5 QoS support
  upstreamed separately)
- Sparx5 ES0 VCAP support
- TC flower template support
- TC matchall filter support for mirroring and policing ports
- TC flower filter mirror action support
- Sparx5 ES2 VCAP support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This tests the insert, move and deleting of rules and checks that the
unused VCAP addresses are initialized correctly.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This provides flower filter packet statistics (bytes are not supported) via
the dedicated IS2 counter feature.

All rules having the same TC cookie will contribute to the packet
statistics for the filter as they are considered to be part of the same TC
flower filter.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds API methods to set and get a rule counter.

A VCAP instance may contain the counter as part of the VCAP cache area, and
this counter may be one or more bits in width.  This type of counter
automatically increments it value when the rule is hit.

Other VCAP instances have a dedicated counter area outside of the VCAP and
in this case the rule must contain the counter id to be able to locate the
counter value.  In this case there must also be a rule action that updates
the counter using the rule id when the rule is hit.

The Sparx5 IS2 VCAP uses a dedicated counter area.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a sorting criteria to rule insertion and deletion.

The criteria is (in the listed order):

- Rule size (largest size first)
- User (based on an enumerated user value)
- Priority (highest priority first, aka lowest value)

When a rule is deleted the other rules may need to be moved to fill the gap
to use the available VCAP address space in the best possible way.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This add support for Sparx5 for dissecting TC ARP flower filter keys and
sets up the Sparx5 IS2 VCAP to generate the ARP keyset for ARP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a new flow_rule_match_arp function that allows drivers
to be able to dissect ARP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The value of 'st->state' has been verified as "TCP_SEQ_STATE_LISTENING",
it's unnecessary to assign TCP_SEQ_STATE_LISTENING to it, so we can remove it.
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nick Child says:

====================
ibmvnic: Introduce affinity hint support

This is a patchset to do 3 things to improve ibmvnic performance:
    1. Assign affinity hints to ibmvnic queue irq's
    2. Update affinity hints on cpu hotplug events
    3. Introduce transmit packet steering (XPS)

NOTE: If irqbalance is running, you need to stop it from overriding
  our affinity hints. To do this you can do one of:
   - systemctl stop irqbalance
   - ban the ibmvnic module irqs
      - you must have the latest irqbalance v9.2, the banmod argument was broken before this
      - in /etc/sysconfig/irqbalance -> IRQBALANCE_ARGS="--banmod=ibmvnic"
      - systemctl restart irqbalance
====================
Signed-off-by: David S. Miller <davem@davemloft.net>