- 14 Jan, 2016 40 commits
-
-
Benjamin Coddington authored
commit 38b7631f upstream. A truncated cb_compound request will cause the client to decode null or data from a previous callback for nfs4.1 backchannel case, or uninitialized data for the nfs4.0 case. This is because the path through svc_process_common() advances the request's iov_base and decrements iov_len without adjusting the overall xdr_buf's len field. That causes xdr_init_decode() to set up the xdr_stream with an incorrect length in nfs4_callback_compound(). Fixing this for the nfs4.1 backchannel case first requires setting the correct iov_len and page_len based on the length of received data in the same manner as the nfs4.0 case. Then the request's xdr_buf length can be adjusted for both cases based upon the remaining iov_len and page_len. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Jan Kara authored
commit c2489e07 upstream. The following test program from Dmitry can cause softlockups or RCU stalls as it copies 1GB from tmpfs into eventfd and we don't have any scheduling point at that path in sendfile(2) implementation: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); Add cond_resched() into __splice_from_pipe() to fix the problem. CC: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit c725bfce upstream. Commit 296291cd (mm: make sendfile(2) killable) fixed an issue where sendfile(2) was doing a lot of tiny writes into a filesystem and thus was unkillable for a long time. However sendfile(2) can be (mis)used to issue lots of writes into arbitrary file descriptor such as evenfd or similar special file descriptors which never hit the standard filesystem write path and thus are still unkillable. E.g. the following example from Dmitry burns CPU for ~16s on my test system without possibility to be killed: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); There are actually quite a few tests for pending signals in sendfile code however we data to write is always available none of them seems to trigger. So fix the problem by adding a test for pending signal into splice_from_pipe_next() also before the loop waiting for pipe buffers to be available. This should fix all the lockup issues with sendfile of the do-ton-of-tiny-writes nature. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Al Viro authored
commit 0ebf7f10 upstream. The thing got broken back in 2002 - sysvfs does *not* have inline symlinks; even short ones have bodies stored in the first block of file. sysv_symlink() handles that correctly; unfortunately, attempting to look an existing symlink up will end up confusing them for inline symlinks, and interpret the block number containing the body as the body itself. Nobody has noticed until now, which says something about the level of testing sysvfs gets ;-/ Signed-off-by:
-
Mike Snitzer authored
commit 0fcb04d5 upstream. When establishing a thin device's discard limits we cannot rely on the underlying thin-pool device's discard capabilities (which are inherited from the thin-pool's underlying data device) given that DM thin devices must provide discard support even when the thin-pool's underlying data device doesn't support discards. Users were exposed to this thin device discard limits regression if their thin-pool's underlying data device does _not_ support discards. This regression caused all upper-layers that called the blkdev_issue_discard() interface to not be able to issue discards to thin devices (because discard_granularity was 0). This regression wasn't caught earlier because the device-mapper-test-suite's extensive 'thin-provisioning' discard tests are only ever performed against thin-pool's with data devices that support discards. Fix is to have thin_io_hints() test the pool's 'discard_enabled' feature rather than inferring whether or not a thin device's discard support should be enabled by looking at the thin-pool's discard_granularity. Fixes: 21607670 ("dm thin: disable discard support for thin devices if pool's is disabled") Reported-by:
Mike Gerber <mike@sprachgewalt.de> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Vineet Gupta authored
commit 2e22502c upstream. Fixes STAR 9000953410: "perf callgraph profiling causing RCU stalls" | perf record -g -c 15000 -e cycles /sbin/hackbench | | INFO: rcu_preempt self-detected stall on CPU | 1: (1 GPs behind) idle=609/140000000000002/0 softirq=2914/2915 fqs=603 | Task dump for CPU 1: in-kernel dwarf unwinder has a fast binary lookup and a fallback linear search (which iterates thru each of ~11K entries) thus takes 2 orders of magnitude longer (~3 million cycles vs. 2000). Routines written in hand assembler lack dwarf info (as we don't support assembler CFI pseudo-ops yet) fail the unwinder binary lookup, hit linear search, failing nevertheless in the end. However the linear search is pointless as binary lookup tables are created from it in first place. It is impossible to have binary lookup fail while succeed the linear search. It is pure waste of cycles thus removed by this patch. This manifested as RCU stalls / NMI watchdog splat when running hackbench under perf with callgraph profiling. The triggering condition was perf counter overflowing in routine lacking dwarf info (like memset) leading to patheic 3 million cycle unwinder slow path and by the time it returned new interrupts were already pending (Timer, IPI) and taken rightaway. The original memset didn't make forward progress, system kept accruing more interrupts and more unwinder delayes in a vicious feedback loop, ultimately triggering the NMI diagnostic. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Michael Neuling authored
commit 7f821fc9 upstream. Currently we can hit a scenario where we'll tm_reclaim() twice. This results in a TM bad thing exception because the second reclaim occurs when not in suspend mode. The scenario in which this can happen is the following. We attempt to deliver a signal to userspace. To do this we need obtain the stack pointer to write the signal context. To get this stack pointer we must tm_reclaim() in case we need to use the checkpointed stack pointer (see get_tm_stackpointer()). Normally we'd then return directly to userspace to deliver the signal without going through __switch_to(). Unfortunatley, if at this point we get an error (such as a bad userspace stack pointer), we need to exit the process. The exit will result in a __switch_to(). __switch_to() will attempt to save the process state which results in another tm_reclaim(). This tm_reclaim() now causes a TM Bad Thing exception as this state has already been saved and the processor is no longer in TM suspend mode. Whee! This patch checks the state of the MSR to ensure we are TM suspended before we attempt the tm_reclaim(). If we've already saved the state away, we should no longer be in TM suspend mode. This has the additional advantage of checking for a potential TM Bad Thing exception. Found using syscall fuzzer. Fixes: fb09692e ("powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes") Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit d2b9d2a5 upstream. Currently we allow both the MSR T and S bits to be set by userspace on a signal return. Unfortunately this is a reserved configuration and will cause a TM Bad Thing exception if attempted (via rfid). This patch checks for this case in both the 32 and 64 bit signals code. If both T and S are set, we mark the context as invalid. Found using a syscall fuzzer. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Signed-off-by:
-
Peter Robinson authored
commit de55acd1 upstream. Fix issue from two patches overlapping causing a kernel oops [ 3569.297449] Unable to handle kernel NULL pointer dereference at virtual address 00000088 [ 3569.306272] pgd = dc894000 [ 3569.309287] [00000088] *pgd=00000000 [ 3569.313104] Internal error: Oops: 5 [#1] SMP ARM [ 3569.317986] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_filter ebtable_nat ebtable_broute bridge stp llc ebtables ip6table_security ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_filter ip6_tables iptable_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle musb_dsps cppi41 musb_hdrc phy_am335x udc_core phy_generic phy_am335x_control omap_sham omap_aes omap_rng omap_hwspinlock omap_mailbox hwspinlock_core musb_am335x omap_wdt at24 8250_omap leds_gpio cpufreq_dt smsc davinci_mdio mmc_block ti_cpsw cpsw_common ptp pps_core cpsw_ale davinci_cpdma omap_hsmmc omap_dma mmc_core i2c_dev [ 3569.386293] CPU: 0 PID: 1429 Comm: wdctl Not tainted 4.3.0-0.rc7.git0.1.fc24.armv7hl #1 [ 3569.394740] Hardware name: Generic AM33XX (Flattened Device Tree) [ 3569.401179] task: dbd11a00 ti: dbaac000 task.ti: dbaac000 [ 3569.406917] PC is at omap_wdt_get_timeleft+0xc/0x20 [omap_wdt] [ 3569.413106] LR is at watchdog_ioctl+0x3cc/0x42c [ 3569.417902] pc : [<bf0ab138>] lr : [<c0739c54>] psr: 600f0013 [ 3569.417902] sp : dbaadf18 ip : 00000003 fp : 7f5d3bbe [ 3569.430014] r10: 00000000 r9 : 00000003 r8 : bef21ab8 [ 3569.435535] r7 : dbbc0f7c r6 : dbbc0f18 r5 : bef21ab8 r4 : 00000000 [ 3569.442427] r3 : 00000000 r2 : 00000000 r1 : 8004570a r0 : dbbc0f18 [ 3569.449323] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3569.456858] Control: 10c5387d Table: 9c894019 DAC: 00000051 [ 3569.462927] Process wdctl (pid: 1429, stack limit = 0xdbaac220) [ 3569.469179] Stack: (0xdbaadf18 to 0xdbaae000) [ 3569.473790] df00: bef21ab8 dbf60e38 [ 3569.482441] df20: dc91b840 8004570a bef21ab8 c03988a4 dbaadf48 dc854000 00000000 dd313850 [ 3569.491092] df40: ddf033b8 0000570a dc91b80b dbaadf3c dbf60e38 00000020 c0df9250 c0df6c48 [ 3569.499741] df60: dc91b840 8004570a 00000000 dc91b840 dc91b840 8004570a bef21ab8 00000003 [ 3569.508389] df80: 00000000 c03989d4 bef21b74 7f5d3bad 00000003 00000036 c020fcc4 dbaac000 [ 3569.517037] dfa0: 00000000 c020fb00 bef21b74 7f5d3bad 00000003 8004570a bef21ab8 00000001 [ 3569.525685] dfc0: bef21b74 7f5d3bad 00000003 00000036 00000001 00000000 7f5e4eb0 7f5d3bbe [ 3569.534334] dfe0: 7f5e4f10 bef21a3c 7f5d0a54 b6e97e0c a00f0010 00000003 00000000 00000000 [ 3569.543038] [<bf0ab138>] (omap_wdt_get_timeleft [omap_wdt]) from [<c0739c54>] (watchdog_ioctl+0x3cc/0x42c) [ 3569.553266] [<c0739c54>] (watchdog_ioctl) from [<c03988a4>] (do_vfs_ioctl+0x5bc/0x698) [ 3569.561648] [<c03988a4>] (do_vfs_ioctl) from [<c03989d4>] (SyS_ioctl+0x54/0x7c) [ 3569.569400] [<c03989d4>] (SyS_ioctl) from [<c020fb00>] (ret_fast_syscall+0x0/0x3c) [ 3569.577413] Code: e12fff1e e52de004 e8bd4000 e5903060 (e5933088) [ 3569.584089] ---[ end trace cec3039bd3ae610a ]--- Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Acked-by:
Lars Poeschel <poeschel@lemonage.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Anson Huang authored
commit 4699ccbf upstream. GPC irq domain is a child domain of GIC, now all of platform irqs are inside GPC domain, during the module populate, all devices irq should have correct type setting in GIC, however, there is no .irq_set_type callback setting in GPC, so the irq_set_type will be skipped and cause all irqs' type in /proc/interrupt are "edge" which mismatch with irq type setting in dtb file. Since GPC has no irq type setting, so just tell kernel to use irq_chip_set_type_parent. Signed-off-by:
Anson Huang <Anson.Huang@freescale.com> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Jens Axboe authored
commit b094f89c upstream. Liu reported that running certain parts of xfstests threw the following error: BUG: sleeping function called from invalid context at mm/page_alloc.c:3190 in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u16:0 3 locks held by kworker/u16:0/6: #0: ("writeback"){++++.+}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730 #1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730 #2: (&type->s_umount_key#44){+++++.}, at: [<ffffffff811e6805>] trylock_super+0x25/0x60 CPU: 5 PID: 6 Comm: kworker/u16:0 Tainted: G OE 4.3.0+ #3 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 Workqueue: writeback wb_workfn (flush-btrfs-108) ffffffff81a3abab ffff88042e282ba8 ffffffff8130191b ffffffff81a3abab 0000000000000c76 ffff88042e282ba8 ffff88042e27c180 ffff88042e282bd8 ffffffff8108ed95 ffff880400000004 0000000000000000 0000000000000c76 Call Trace: [<ffffffff8130191b>] dump_stack+0x4f/0x74 [<ffffffff8108ed95>] ___might_sleep+0x185/0x240 [<ffffffff8108eea2>] __might_sleep+0x52/0x90 [<ffffffff811817e8>] __alloc_pages_nodemask+0x268/0x410 [<ffffffff8109a43c>] ? sched_clock_local+0x1c/0x90 [<ffffffff8109a6d1>] ? local_clock+0x21/0x40 [<ffffffff810b9eb0>] ? __lock_release+0x420/0x510 [<ffffffff810b534c>] ? __lock_acquired+0x16c/0x3c0 [<ffffffff811ca265>] alloc_pages_current+0xc5/0x210 [<ffffffffa0577105>] ? rbio_is_full+0x55/0x70 [btrfs] [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffff81666d50>] ? _raw_spin_unlock_irqrestore+0x40/0x60 [<ffffffffa0578c0a>] full_stripe_write+0x5a/0xc0 [btrfs] [<ffffffffa0578ca9>] __raid56_parity_write+0x39/0x60 [btrfs] [<ffffffffa0578deb>] run_plug+0x11b/0x140 [btrfs] [<ffffffffa0578e33>] btrfs_raid_unplug+0x23/0x70 [btrfs] [<ffffffff812d36c2>] blk_flush_plug_list+0x82/0x1f0 [<ffffffff812e0349>] blk_sq_make_request+0x1f9/0x740 [<ffffffff812ceba2>] ? generic_make_request_checks+0x222/0x7c0 [<ffffffff812cf264>] ? blk_queue_enter+0x124/0x310 [<ffffffff812cf1d2>] ? blk_queue_enter+0x92/0x310 [<ffffffff812d0ae2>] generic_make_request+0x172/0x2c0 [<ffffffff812d0ad4>] ? generic_make_request+0x164/0x2c0 [<ffffffff812d0ca0>] submit_bio+0x70/0x140 [<ffffffffa0577b29>] ? rbio_add_io_page+0x99/0x150 [btrfs] [<ffffffffa0578a89>] finish_rmw+0x4d9/0x600 [btrfs] [<ffffffffa0578c4c>] full_stripe_write+0x9c/0xc0 [btrfs] [<ffffffffa057ab7f>] raid56_parity_write+0xef/0x160 [btrfs] [<ffffffffa052bd83>] btrfs_map_bio+0xe3/0x2d0 [btrfs] [<ffffffffa04fbd6d>] btrfs_submit_bio_hook+0x8d/0x1d0 [btrfs] [<ffffffffa05173c4>] submit_one_bio+0x74/0xb0 [btrfs] [<ffffffffa0517f55>] submit_extent_page+0xe5/0x1c0 [btrfs] [<ffffffffa0519b18>] __extent_writepage_io+0x408/0x4c0 [btrfs] [<ffffffffa05179c0>] ? alloc_dummy_extent_buffer+0x140/0x140 [btrfs] [<ffffffffa051dc88>] __extent_writepage+0x218/0x3a0 [btrfs] [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffffa051e2c9>] extent_write_cache_pages.clone.0+0x2f9/0x400 [btrfs] [<ffffffffa051e422>] extent_writepages+0x52/0x70 [btrfs] [<ffffffffa05001f0>] ? btrfs_set_inode_index+0x70/0x70 [btrfs] [<ffffffffa04fcc17>] btrfs_writepages+0x27/0x30 [btrfs] [<ffffffff81184df3>] do_writepages+0x23/0x40 [<ffffffff81212229>] __writeback_single_inode+0x89/0x4d0 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480 [<ffffffff8121295f>] ? writeback_sb_inodes+0x15f/0x480 [<ffffffff81212ad2>] writeback_sb_inodes+0x2d2/0x480 [<ffffffff810b1397>] ? down_read_trylock+0x57/0x60 [<ffffffff811e6805>] ? trylock_super+0x25/0x60 [<ffffffff810d629f>] ? rcu_read_lock_sched_held+0x4f/0x90 [<ffffffff81212d0c>] __writeback_inodes_wb+0x8c/0xc0 [<ffffffff812130b5>] wb_writeback+0x2b5/0x500 [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0 [<ffffffff810660a8>] ? __local_bh_enable_ip+0x68/0xc0 [<ffffffff81213362>] ? wb_do_writeback+0x62/0x310 [<ffffffff812133c1>] wb_do_writeback+0xc1/0x310 [<ffffffff8107c3d9>] ? set_worker_desc+0x79/0x90 [<ffffffff81213842>] wb_workfn+0x92/0x330 [<ffffffff8107f133>] process_one_work+0x223/0x730 [<ffffffff8107f083>] ? process_one_work+0x173/0x730 [<ffffffff8108035f>] ? worker_thread+0x18f/0x430 [<ffffffff810802ed>] worker_thread+0x11d/0x430 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0 [<ffffffff810858df>] kthread+0xef/0x110 [<ffffffff8108f74e>] ? schedule_tail+0x1e/0xd0 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff816673bf>] ret_from_fork+0x3f/0x70 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70 The issue is that we've got the software context pinned while calling blk_flush_plug_list(), which flushes callbacks that are allowed to sleep. btrfs and raid has such callbacks. Flip the checks around a bit, so we can enable preempt a bit earlier and flush plugs without having preempt disabled. This only affects blk-mq driven devices, and only those that register a single queue. Reported-by:
Liu Bo <bo.li.liu@oracle.com> Tested-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Takashi Iwai authored
commit 196543d5 upstream. It turned out that many HP laptops suffer from the same problem as fixed in commit [c932b98c: ALSA: hda - Apply pin fixup for HP ProBook 6550b]. But, it's tiresome to list up all such PCI SSIDs, as there are really lots of HP machines. Instead, we do a bit more clever, try to check the supposedly dock and built-in headphone pins, and apply the fixup when both seem valid. This rule can be applied generically to all models using the same quirk, so we'll fix all in a shot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107491Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kees Cook authored
commit 02e2a5bf upstream. If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Mikulas Patocka authored
commit bcbd94ff upstream. A kernel thread executes __set_current_state(TASK_INTERRUPTIBLE), __add_wait_queue, spin_unlock_irq and then tests kthread_should_stop(). It is possible that the processor reorders memory accesses so that kthread_should_stop() is executed before __set_current_state(). If such reordering happens, there is a possible race on thread termination: CPU 0: calls kthread_should_stop() it tests KTHREAD_SHOULD_STOP bit, returns false CPU 1: calls kthread_stop(cc->write_thread) sets the KTHREAD_SHOULD_STOP bit calls wake_up_process on the kernel thread, that sets the thread state to TASK_RUNNING CPU 0: sets __set_current_state(TASK_INTERRUPTIBLE) spin_unlock_irq(&cc->write_thread_wait.lock) schedule() - and the process is stuck and never terminates, because the state is TASK_INTERRUPTIBLE and wake_up_process on CPU 1 already terminated Fix this race condition by using a new flag DM_CRYPT_EXIT_THREAD to signal that the kernel thread should exit. The flag is set and tested while holding cc->write_thread_wait.lock, so there is no possibility of racy access to the flag. Also, remove the unnecessary set_task_state(current, TASK_RUNNING) following the schedule() call. When the process was woken up, its state was already set to TASK_RUNNING. Other kernel code also doesn't set the state to TASK_RUNNING following schedule() (for example, do_wait_for_common in completion.c doesn't do it). Fixes: dc267621 ("dm crypt: offload writes to thread") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit b9c2fa52 upstream. For making the speakers on Acer Aspire One Cloudbook 14 to work, we need the as same quirk as for another Chromebook. This patch adds the corresponding fixup entry. Reported-by:
Patrick <epictetus@gmail.com> Signed-off-by:
-
Mike Snitzer authored
commit 172c2386 upstream. A thin-pool that is in out-of-data-space (OODS) mode may transition back to write mode -- without the admin adding more space to the thin-pool -- if/when blocks are released (either by deleting thin devices or discarding provisioned blocks). But as part of the thin-pool's earlier transition to out-of-data-space mode the thin-pool may have set the 'error_if_no_space' flag to true if the no_space_timeout expires without more space having been made available. That implementation detail, of changing the pool's error_if_no_space setting, needs to be reset back to the default that the user specified when the thin-pool's table was loaded. Otherwise we'll drop the user requested behaviour on the floor when this out-of-data-space to write mode transition occurs. Reported-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Fixes: 2c43fd26 ("dm thin: fix missing out-of-data-space to write mode transition if blocks are released") Signed-off-by:
-
Takashi Iwai authored
commit 86f799b8 upstream. Dell Latitude E6440 (1028:05bd) needs the same fixup as applied to other Latitude E7xxx models for the click noise due to the recent power-saving changes. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=954876Signed-off-by:
-
Sabrina Dubroca authored
commit e639b8d8 upstream. Reset pskb in macvlan_handle_frame in case skb_share_check returned a clone. Fixes: 8a4eb573 ("net: introduce rx_handler results and logic around that") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sabrina Dubroca authored
commit a534dc52 upstream. ipvlan_handle_frame is a rx_handler, and when it returns a value other than RX_HANDLER_CONSUMED (here, NET_RX_DROP aka RX_HANDLER_ANOTHER), __netif_receive_skb_core expects that the skb still exists and will process it further, but we just freed it. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
-
Sabrina Dubroca authored
commit cf554ada upstream. Pass a **skb to ipvlan_rcv_frame so that if skb_share_check returns a new skb, we actually use it during further processing. It's safe to ignore the new skb in the ipvlan_xmit_* functions, because they call ipvlan_rcv_frame with local == true, so that dev_forward_skb is called and always takes ownership of the skb. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
-
Geert Uytterhoeven authored
commit cf897526 upstream. fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’: fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in this function If the jump to label "error" is taken, "ret" will indeed be uninitialized, and random stack data may be printed by the debug code. Fixes: 102f4d90 ("FS-Cache: Handle a write to the page immediately beyond the EOF marker") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Brian Norris authored
commit 9ca641b0 upstream. If multiple NAND chips are registered to the same controller, then when rebooting the system, the first one will grab the controller lock, while the second will wait forever for the first one to release it. i.e., a classic deadlock. This problem was solved for a similar case (suspend/resume) back in commit 6b0d9a84 ("mtd: nand: fix multi-chip suspend problem"), and the shutdown state really isn't much different for us, so rather than adding a new special case to nand_get_device(), we can just overload the FL_PM_SUSPENDED state. Now, multiple chips can "get" the same controller lock (preventing further I/O), while we still allow other chips to pass through nand_shutdown(). Original report: http://thread.gmane.org/gmane.linux.drivers.mtd/59726 http://lists.infradead.org/pipermail/linux-mtd/2015-July/059992.html Fixes: 72ea4036 ("mtd: nand: added nand_shutdown") Reported-by:
Andrew E. Mileski <andrewm@isoar.ca> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Andrew E. Mileski <andrewm@isoar.ca> Acked-by:
Scott Branden <sbranden@broadcom.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Noa Osherovich authored
commit d49c2197 upstream. The err variable wasn't set with the correct error value in some cases. Fixes: 47605df9 ('mlx4: Modify proxy/tunnel QP mechanism [..]') Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Adrian Hunter authored
commit e266a753 upstream. Commit 4598a0a6 ("perf symbols: Improve DSO long names lookup speed with rbtree") Added a tree to lookup dsos by long name. That tree gets corrupted whenever a dso long name is changed because the tree is not updated. One effect of that is buildid-list does not work with the 'with-hits' option because dso lookup fails and results in two structs for the same dso. The first has the buildid but no hits, the second has hits but no buildid. e.g. Before: $ tools/perf/perf record ls arch certs CREDITS Documentation firmware include ipc Kconfig lib Makefile net REPORTING-BUGS scripts sound usr block COPYING crypto drivers fs init Kbuild kernel MAINTAINERS mm README samples security tools virt [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data (11 samples) ] $ tools/perf/perf buildid-list 574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms] 30c94dc66a1fe95180c3d68d2b89e576d5ae213c /lib/x86_64-linux-gnu/libc-2.19.so $ tools/perf/perf buildid-list -H 574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms] 0000000000000000000000000000000000000000 /lib/x86_64-linux-gnu/libc-2.19.so After: $ tools/perf/perf buildid-list -H 574da826c66538a8d9060d393a8866289bd06005 [kernel.kallsyms] 30c94dc66a1fe95180c3d68d2b89e576d5ae213c /lib/x86_64-linux-gnu/libc-2.19.so The fix is to record the root of the tree on the dso so that dso__set_long_name() can update the tree when the long name changes. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hp.com> Cc: Waiman Long <Waiman.Long@hp.com> Fixes: 4598a0a6 ("perf symbols: Improve DSO long names lookup speed with rbtree") Link: http://lkml.kernel.org/r/1447408112-1920-2-git-send-email-adrian.hunter@intel.comSigned-off-by:
-
Arnd Bergmann authored
commit 49e4a229 upstream. Building dwmac-ipq806x on a 64-bit architecture produces a harmless warning from gcc: stmmac/dwmac-ipq806x.c: In function 'ipq806x_gmac_probe': include/linux/bitops.h:6:19: warning: overflow in implicit constant conversion [-Woverflow] val = QSGMII_PHY_CDR_EN | stmmac/dwmac-ipq806x.c:333:8: note: in expansion of macro 'QSGMII_PHY_CDR_EN' #define QSGMII_PHY_CDR_EN BIT(0) #define BIT(nr) (1UL << (nr)) This is a result of the type conversion rules in C, when we take the logical OR of multiple different types. In particular, we have and unsigned long QSGMII_PHY_CDR_EN == BIT(0) == (1ul << 0) == 0x0000000000000001ul and a signed int 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET == 0xc0000000 which together gives a signed long value 0xffffffffc0000001l and when this is passed into a function that takes an unsigned int type, gcc warns about the signed overflow and the loss of the upper 32-bits that are all ones. This patch adds 'ul' type modifiers to the literal numbers passed in here, so now the expression remains an 'unsigned long' with the upper bits all zero, and that avoids the signed overflow and the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: b1c17215 ("stmmac: add ipq806x glue layer") Signed-off-by:
-
Luca Porzio authored
commit d3df0465 upstream. Anytime a write operation is performed with Reliable Write flag enabled, the eMMC device is enforced to bypass the cache and do a write to the underling NVM device by Jedec specification; this causes a performance penalty since write operations can't be optimized by the device cache. In our tests, we replayed a typical mobile daily trace pattern and found ~9% overall time reduction in trace replay by using this patch. Also the write ops within 4KB~64KB chunk size range get a 40~60% performance improvement by using the patch (as this range of write chunks are the ones affected by REQ_META). This patch has been discussed in the Mobile & Embedded Linux Storage Forum and it's the results of feedbacks from many people. We also checked with fsdevl and f2fs mailing list developers that this change in the usage of REQ_META is not affecting FS behavior and we got positive feedbacks. Reporting here the feedbacks: http://comments.gmane.org/gmane.linux.file-systems/97219 http://thread.gmane.org/gmane.linux.file-systems.f2fs/3178/focus=3183Signed-off-by:
Bruce Ford <bford@micron.com> Signed-off-by:
Luca Porzio <lporzio@micron.com> Fixes: ce39f9d1 ("mmc: support packed write command for eMMC4.5 devices") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Helge Deller authored
commit dcbf0d29 upstream. Drop the MADV_xxK_PAGES flags, which were never used and were from a proposed API which was never integrated into the generic Linux kernel code. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Richard Weinberger authored
commit 9d8a7652 upstream. sigsuspend() is nowhere used except in signal.c itself, so we can mark it static do not pollute the global namespace. But this patch is more than a boring cleanup patch, it fixes a real issue on UserModeLinux. UML has a special console driver to display ttys using xterm, or other terminal emulators, on the host side. Vegard reported that sometimes UML is unable to spawn a xterm and he's facing the following warning: WARNING: CPU: 0 PID: 908 at include/linux/thread_info.h:128 sigsuspend+0xab/0xc0() It turned out that this warning makes absolutely no sense as the UML xterm code calls sigsuspend() on the host side, at least it tries. But as the kernel itself offers a sigsuspend() symbol the linker choose this one instead of the glibc wrapper. Interestingly this code used to work since ever but always blocked signals on the wrong side. Some recent kernel change made the WARN_ON() trigger and uncovered the bug. It is a wonderful example of how much works by chance on computers. :-) Fixes: 68f3f16d ("new helper: sigsuspend()") Signed-off-by:
Richard Weinberger <richard@nod.at> Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Tested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
OGAWA Hirofumi authored
commit 928a4771 upstream. For the root directory, . and .. are faked (using dir_emit_dots()) and ctx->pos is reset from 2 to 0. A corrupted root directory could cause fat_get_entry() to fail, but ->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos rewound to 0), so any following calls to ->iterate() continue to return the same entries again and again. The result is that userspace will never see the end of the directory, causing e.g. 'ls' to hang in a getdents() loop. [hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset] Reported-by:
Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Mathias Nyman authored
commit dad67d5f upstream. Clear device initiated resume variables once device is fully up and running in U0 state. Resume needs to be signaled for 20ms for usb2 devices before they can be moved to U0 state. An interrupt is triggered if a device initiates resume. As we handle the event in interrupt context we can not sleep for 20ms, so we instead set a resume flag, a timestamp, and start the roothub polling. The roothub code will later move the port to U0 when it finds a port in resume state with the resume flag set, and timestamp passed by 20ms. A host initiated resume is however not done in interrupt context, and host initiated resume code will directly signal resume, wait 20ms and then move the port to U0. These two codepaths can race, if we are in the middle of a host initated resume, while sleeping for 20ms, we may handle a port event and find the port in resume state. The port event handling code will assume the resume was device initiated and set the resume flag and timestamp. Root hub code will however not catch the port in resume state again as the host initated resume code has already moved the port to U0. The resume flag and timestamp will remain set for this port preventing port from suspending again (LPM setting port to U3) Fix this for now by always clearing the device initated resume parameters once port is in U0 Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [ kamal: backport to 4.2: context ] Signed-off-by:
-
Li Jun authored
commit 251b3c8b upstream. Since the ci->role will be set after the host role start is complete, there will be nobody cared irq during start host if usb irq enabled. This error can be reproduced on i.mx6 sololite EVK board by: 1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1 in dts. 2. boot up the board with ID cable and usb device connected. 3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role 4. echo host > /sys/kernel/debug/ci_hdrc.0/role 5. irq 212: nobody cared. Signed-off-by:
Li Jun <jun.li@freescale.com> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Lorenzo Pieralisi authored
commit de818bd4 upstream. The function graph tracer adds instrumentation that is required to trace both entry and exit of a function. In particular the function graph tracer updates the "return address" of a function in order to insert a trace callback on function exit. Kernel power management functions like cpu_suspend() are called upon power down entry with functions called "finishers" that are in turn called to trigger the power down sequence but they may not return to the kernel through the normal return path. When the core resumes from low-power it returns to the cpu_suspend() function through the cpu_resume path, which leaves the trace stack frame set-up by the function tracer in an incosistent state upon return to the kernel when tracing is enabled. This patch fixes the issue by pausing/resuming the function graph tracer on the thread executing cpu_suspend() (ie the function call that subsequently triggers the "suspend finishers"), so that the function graph tracer state is kept consistent across functions that enter power down states and never return by effectively disabling graph tracer while they are executing. Fixes: 819e50e2 ("arm64: Add ftrace support") Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
AKASHI Takahiro <takahiro.akashi@linaro.org> Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Ville Syrjälä authored
commit 76dc3769 upstream. We try to convert the old way of of specifying fb tiling (obj->tiling) into the new fb modifiers. We store the result in the passed in mode_cmd structure. But that structure comes directly from the addfb2 ioctl, and gets copied back out to userspace, which means we're clobbering the modifiers that the user provided (all 0 since the DRM_MODE_FB_MODIFIERS flag wasn't even set by the user). Hence if the user reuses the struct for another addfb2, the ioctl will be rejected since it's now asking for some modifiers w/o the flag set. Fix the problem by making a copy of the user provided structure. We can play any games we want with the copy. IGT-Version: 1.12-git (x86_64) (Linux: 4.4.0-rc1-stereo+ x86_64) ... Subtest basic-X-tiled: SUCCESS (0.001s) Test assertion failure function pitch_tests, file kms_addfb_basic.c:167: Failed assertion: drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0 Last errno: 22, Invalid argument Stack trace: #0 [__igt_fail_assert+0x101] #1 [pitch_tests+0x619] #2 [__real_main426+0x2f] #3 [main+0x23] #4 [__libc_start_main+0xf0] #5 [_start+0x29] #6 [<unknown>+0x29] Subtest framebuffer-vs-set-tiling failed. **** DEBUG **** Test assertion failure function pitch_tests, file kms_addfb_basic.c:167: Failed assertion: drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0 Last errno: 22, Invalid argument **** END **** Subtest framebuffer-vs-set-tiling: FAIL (0.003s) ... IGT-Version: 1.12-git (x86_64) (Linux: 4.4.0-rc1-stereo+ x86_64) Subtest framebuffer-vs-set-tiling: SUCCESS (0.000s) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 2a80eada ("drm/i915: Add fb format modifier support") Testcase: igt/kms_addfb_basic/clobbered-modifier Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447261890-3960-1-git-send-email-ville.syrjala@linux.intel.comSigned-off-by:
-
Ard Biesheuvel authored
commit 4fee9f36 upstream. When booting a 64k pages kernel that is built with CONFIG_DEBUG_RODATA and resides at an offset that is not a multiple of 512 MB, the rounding that occurs in __map_memblock() and fixup_executable() results in incorrect regions being mapped. The following snippet from /sys/kernel/debug/kernel_page_tables shows how, when the kernel is loaded 2 MB above the base of DRAM at 0x40000000, the first 2 MB of memory (which may be inaccessible from non-secure EL1 or just reserved by the firmware) is inadvertently mapped into the end of the module region. ---[ Modules start ]--- 0xfffffdffffe00000-0xfffffe0000000000 2M RW NX ... UXN MEM/NORMAL ---[ Modules end ]--- ---[ Kernel Mapping ]--- 0xfffffe0000000000-0xfffffe0000090000 576K RW NX ... UXN MEM/NORMAL 0xfffffe0000090000-0xfffffe0000200000 1472K ro x ... UXN MEM/NORMAL 0xfffffe0000200000-0xfffffe0000800000 6M ro x ... UXN MEM/NORMAL 0xfffffe0000800000-0xfffffe0000810000 64K ro x ... UXN MEM/NORMAL 0xfffffe0000810000-0xfffffe0000a00000 1984K RW NX ... UXN MEM/NORMAL 0xfffffe0000a00000-0xfffffe00ffe00000 4084M RW NX ... UXN MEM/NORMAL The same issue is likely to occur on 16k pages kernels whose load address is not a multiple of 32 MB (i.e., SECTION_SIZE). So round to SWAPPER_BLOCK_SIZE instead of SECTION_SIZE. Fixes: da141706 ("arm64: add better page protections to arm64") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Dan Williams authored
commit ef83b6e8 upstream. Similar to XFS warn when mounting DAX while it is still considered under development. Also, aspects of the DAX implementation, for example synchronization against multiple faults and faults causing block allocation, depend on the correct implementation in the filesystem. The maturity of a given DAX implementation is filesystem specific. Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: linux-ext4@vger.kernel.org Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Dave Chinner <david@fromorbit.com> Acked-by:
Jan Kara <jack@suse.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Bjørn Mork authored
commit 59536da3 upstream. The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by:
Muri Nicanor <muri+libqmi@immerda.ch> Tested-by:
Martin Hauke <mardnh@gmx.de> Fixes: e7181d00 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jay Cornwall authored
commit a80b3047 upstream. The VM default page (used when a VM translation fails) is allocated in system memory. The VM is misconfigured to interpret the physical address as referencing a VRAM physical page. Route default page accesses to system memory. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jay Cornwall <jay@jcornwall.me> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 24dd2f64 upstream. Avoids spew on resume for systems where sysfs may fail even on init. bug: https://bugzilla.kernel.org/show_bug.cgi?id=106851Signed-off-by:
-
Michel Dänzer authored
commit 96ea47c0 upstream. They reportedly cause random GPU hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91268Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Imre Deak authored
commit fd0fe6ac upstream. After Damien's D3 fix I started to get runtime suspend residency for the first time and that revealed a breakage on the set_caching IOCTL path that accesses the HW but doesn't take an RPM ref. Fix this up. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446665132-22491-1-git-send-email-imre.deak@intel.comSigned-off-by:
-
