- 17 Oct, 2015 40 commits
-
-
H Hartley Sweeten authored
Instead of relying on the IS_UNIPOLAR mask value, use the comedi helper function to check if the range is unipolar. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Convert the inline function DAC_DATA_REG() into a simple macro. Rename the defines for the PCI BAR4 register offsets so they have namespace associated with the driver and convert the offsets to hex. Signed-off-by:
-
H Hartley Sweeten authored
This member of the private data holds the PCI BAR4 resource starting address. For aesthetics, rename this member to 'pcibar4'. Signed-off-by:
-
H Hartley Sweeten authored
This member of the private data holds the PCI BAR2 resource starting address. For aesthetics, rename this member to 'pcibar2'. Signed-off-by:
-
H Hartley Sweeten authored
This member of the private data holds the PCI BAR1 resource starting address. For aesthetics, rename this member to 'pcibar1'. Signed-off-by:
-
H Hartley Sweeten authored
All the boards, except the 'pci-das1001', use the normal analog input range table 'cb_pcidas_ranges'. Convert the 'ranges' boardinfo into a bit-field flag 'use_alt_range' to save a bit of space. For aesthetics, reword the comments in the boardinfo for the bit-field members so they align. Signed-off-by:
-
H Hartley Sweeten authored
All the boards supported by this driver have 16 analog input channels. Remove this unnecessary information from the boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
Only some of the boards supported by this driver have analog outputs but they always have 2 channels. Refactor the 'ao_nchan' member of the boardinfo into a bit-field flag 'has_ao' to save a bit of space. Also, convert the 'has_ao_fifo' member into a bit-field flag. Signed-off-by:
-
H Hartley Sweeten authored
The boards supported by this driver either have 16-bit or 12-bit analog input/output resolution. For aesthetics, replace the 'ai_bits' member of the boardinfo with a bit-field flag 'is_16bit'. Also, change the types of the other bit-field flags to unsigned int. Signed-off-by:
-
H Hartley Sweeten authored
These defines don't add any additional clarity to the driver. Just remove them. Signed-off-by:
-
H Hartley Sweeten authored
Reformat the multi-line comments in the kernel CodingStyle. Signed-off-by:
-
Sakshi Bansal authored
Fixed block comments usage of * on subsequent lines Signed-off-by:
Sakshi Bansal <sakshi.april5@gmail.com> Signed-off-by:
-
Ronit Halder authored
This patch replaces dma_alloc_coherent with the corresponding managed interface. Signed-off-by:
Ronit Halder <ronit.crj@gmail.com> Signed-off-by:
-
Christian Gromm authored
This patch prevents code from crossing the 80 character margin. Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
-
Christian Gromm authored
This patch changes the description of a function parameter for a better understanding. Signed-off-by:
-
Christian Gromm authored
This patch replaces memcpy() by the preferred function ether_addr_copy(). Signed-off-by:
-
Christian Gromm authored
This patch removes and fixes constants being misplaced in comparisons. Signed-off-by:
-
Christian Gromm authored
This patch fixes a couple of issues of the hdm-usb module found by checkpatch.pl. Signed-off-by:
-
Christian Gromm authored
This patch fixes the issues of HDM module i2c found by checkpatch.pl Signed-off-by:
-
Christian Gromm authored
This patch removes constants from comparisons and fixes checkpatch warnings about constants being put in the wrong place inside a comparison. Signed-off-by:
-
Christian Gromm authored
This patch fixes line-over-80-characters violation and removes the splitting of quoted strings. Signed-off-by:
-
Shivani Bhardwaj authored
The variable mbo is already NULL tested so, check on it should be removed. Semantic patch used: @@ expression E; statement S; @@ if(E==NULL) {... return ...;} - if(E) S Signed-off-by:Shivani Bhardwaj <shivanib134@gmail.com> Signed-off-by:
-
Gavin Thomas Claugus authored
Fix 80+ character line in cdev.c to stop checkpatch from whining. Signed-off-by:
Gavin Thomas Claugus <gclaugus@gmail.com> Signed-off-by:
-
Aybuke Ozdemir authored
Problem found using checkpatch.pl CHECK: Comparison to NULL could be written "(!)dcon_device" Signed-off-by:
Aybuke Ozdemir <aybuke.147@gmail.com> Signed-off-by:
-
Aybuke Ozdemir authored
This patch "uint16_t" type instead of "u16" type was used. checkpatch.pl issue. Signed-off-by:
-
Aybuke Ozdemir authored
Remove multiple blank lines. Problem found using checkpatch.pl CHECK: Please don't use multiple blank lines. Signed-off-by:
-
Alison Schofield authored
Replace explicit NULL comparison and zero comparison test with ! operator to simplify code. Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Shivani Bhardwaj authored
struct bd is already NULL tested so, any further NULL checks should be removed. Signed-off-by:
-
Shivani Bhardwaj authored
Compiler can typecast variables implicitly so, explicit type cast is not required and should be removed. Semantic patch used: @@ type T; T e; identifier x; @@ * T x = (T)e; Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by:
-
Luis de Bethencourt authored
Boolean tests do not need explicit comparison to true or false. Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove intialisation of a variable that is immediately reassigned. The semantic patch used to find this is: // <smpl> @@ type T; identifier x; constant C; expression e; @@ T x - = C ; x = e; // </smpl> Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace bit shifting on 1 with the BIT(x) Macro The semantic patch used to find this is: @@ int g; @@ -(1 << g) +BIT(g) Signed-off-by:
-
