Pull more ACPI and power management updates from Rafael Wysocki:
 "These are fixups on top of the previous PM+ACPI pull request,
  regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes
  (ACPI reset, cpufreq), new PM trace points for system suspend
  profiling and a copyright notice update.

  Specifics:

   - I didn't remember correctly that the Hans de Goede's ACPI video
     patches actually didn't flip the video.use_native_backlight
     default, although we had discussed that and decided to do that.
     Since I said we would do that in the previous PM+ACPI pull request,
     make that change for real now.

   - ACPI bus check notifications for PCI host bridges don't cause the
     bus below the host bridge to be checked for changes as they should
     because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
     subsystem that forgets to add hotplug contexts to PCI host bridge
     ACPI device objects.  Create hotplug contexts for PCI host bridges
     too as appropriate.

   - Revert recent cpufreq commit related to the big.LITTLE cpufreq
     driver that breaks arm64 builds.

   - Fix for a regression in the ppc-corenet cpufreq driver introduced
     during the 3.15 cycle and causing the driver to use the remainder
     from do_div instead of the quotient.  From Ed Swarthout.

   - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
     systems where the ACPI reset register is located in memory address
     space.  Fix from Randy Wright.

   - Fix for a problem with cpufreq governors that decisions made by
     them may be suboptimal due to the fact that deferrable timers are
     used by them for CPU load sampling.  From Srivatsa S Bhat.

   - Fix for a problem with the Tegra cpufreq driver where the CPU
     frequency is temporarily switched to a "stable" level that is
     different from both the initial and target frequencies during
     transitions which causes udelay() to expire earlier than it should
     sometimes.  From Viresh Kumar.

   - New trace points and rework of some existing trace points for
     system suspend/resume profiling from Todd Brandt.

   - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
     Viresh Kumar.

   - Copyright notice update for suspend-and-cpuhotplug.txt from
     Srivatsa S Bhat"

* tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges
  PM / sleep: trace events for device PM callbacks
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  PM / sleep: trace events for suspend/resume
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies
  ACPI / video: Change the default for video.use_native_backlight to 1
  ACPI: Fix bug when ACPI reset register is implemented in system memory

Pull LED updates from Bryan Wu:
 "I just found merge window is open and I'm quite busy and almost forget
  to send out this pull request.  Thanks Russell and Alexandre ping me
  about this.

  So basically we got some clean up and leds-pwm fixing patches from
  Russell"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: Remove duplicated OOM message for individual driver
  drivers/leds: Replace __get_cpu_var use through this_cpu_ptr
  leds: lp55xx: add DT bindings for LP55231
  leds: 88pm860x: Fix missing refcount decrement for parent of_node
  leds: 88pm860x: Use of_get_child_by_name
  leds: leds-pwm: add DT support for LEDs wired to supply
  leds: leds-pwm: implement PWM inversion
  leds: leds-pwm: convert OF parsing code to use led_pwm_add()
  leds: leds-pwm: provide a common function to setup a single led-pwm device
  leds: pca9685: Remove leds-pca9685 driver
  dell-led: add mic mute led interface

Pull backlight fixes from Lee Jones:
 "This merely contains some very basic build/run-time bug fixes"

* tag 'backlight-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: gpio-backlight: Fix warning when the GPIO is on a I2C chip
  video/backlight: s6e63m0: Fix string type mismatch
  video/backlight: LP8788 needs PWM
  video/backlight: LP855X needs PWM
  video/pxa: LCD_CORGI needs BACKLIGHT_CLASS_DEVICE
  video/backlight: LM3630A needs PWM

Pull more MFD updates from Lee Jones:
 "I missed collecting these patches due to a branch/tag naming
  ambiguity.  Completely my own fault, as I mindlessly named a branch
  and tag identically.  Sorry for the fuss.

  This pull-request contains some misplaced patches from Tony Lindgren
  that should have been part of the initial one"

* tag 'mfd-for-linus-3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle
  mfd: twl4030-power: Add support for board specific configuration
  mfd: twl4030-power: Add recommended idle configuration
  mfd: twl4030-power: Add generic reset configuration
  mfd: twl4030-power: Fix some defines for SW_EVENTS
  mfd: twl4030-power: Fix hang on reboot if sleep configuration was loaded earlier

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes for 3.16.

   - fix some various compiler warnings
   - make atmel-mci compile again
   - fix regression for sdhci-msm"

* tag 'mmc-v3.16-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: simplify SDHCI Kconfig dependencies
  mmc: omap: don't select TPS65010
  mmc: mvsdio: avoid compiler warning
  mmc: atmel-mci: incude asm/cacheclush.h
  mmc: sdhci-msm: Fix fallout from sdhci refactoring
  mmc: usdhi6rol0: fix compiler warnings

Pull drm updates from Dave Airlie:
 "This is the main drm merge window pull request, changes all over the
  place, mostly normal levels of churn.

  Highlights:

  Core drm:
     More cleanups, fix race on connector/encoder naming, docs updates,
     object locking rework in prep for atomic modeset

  i915:
     mipi DSI support, valleyview power fixes, cursor size fixes,
     execlist refactoring, vblank improvements, userptr support, OOM
     handling improvements

  radeon:
     GPUVM tuning and large page size support, gart fixes, deep color
     HDMI support, HDMI audio cleanups

  nouveau:
     - displayport rework should fix lots of issues
     - initial gk20a support
     - gk110b support
     - gk208 fixes

  exynos:
     probe order fixes, HDMI changes, IPP consolidation

  msm:
     debugfs updates, misc fixes

  ast:
     ast2400 support, sync with UMS driver

  tegra:
     cleanups, hdmi + hw cursor for Tegra 124.

  panel:
     fixes existing panels add some new ones.

  ipuv3:
     moved from staging to drivers/gpu"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits)
  drm/nouveau/disp/dp: fix tmds passthrough on dp connector
  drm/nouveau/dp: probe dpcd to determine connectedness
  drm/nv50-: trigger update after all connectors disabled
  drm/nv50-: prepare for attaching a SOR to multiple heads
  drm/gf119-/disp: fix debug output on update failure
  drm/nouveau/disp/dp: make use of postcursor when its available
  drm/g94-/disp/dp: take max pullup value across all lanes
  drm/nouveau/bios/dp: parse lane postcursor data
  drm/nouveau/dp: fix support for dpms
  drm/nouveau: register a drm_dp_aux channel for each dp connector
  drm/g94-/disp: add method to power-off dp lanes
  drm/nouveau/disp/dp: maintain link in response to hpd signal
  drm/g94-/disp: bash and wait for something after changing lane power regs
  drm/nouveau/disp/dp: split link config/power into two steps
  drm/nv50/disp: train PIOR-attached DP from second supervisor
  drm/nouveau/disp/dp: make use of existing output data for link training
  drm/gf119/disp: start removing direct vbios parsing from supervisor
  drm/nv50/disp: start removing direct vbios parsing from supervisor
  drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
  drm/nouveau/disp/dp: create subclass for dp outputs
  ...

Pull vfs updates from Al Viro:
 "This the bunch that sat in -next + lock_parent() fix.  This is the
  minimal set; there's more pending stuff.

  In particular, I really hope to get acct.c fixes merged this cycle -
  we need that to deal sanely with delayed-mntput stuff.  In the next
  pile, hopefully - that series is fairly short and localized
  (kernel/acct.c, fs/super.c and fs/namespace.c).  In this pile: more
  iov_iter work.  Most of prereqs for ->splice_write with sane locking
  order are there and Kent's dio rewrite would also fit nicely on top of
  this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
  lock_parent: don't step on stale ->d_parent of all-but-freed one
  kill generic_file_splice_write()
  ceph: switch to iter_file_splice_write()
  shmem: switch to iter_file_splice_write()
  nfs: switch to iter_splice_write_file()
  fs/splice.c: remove unneeded exports
  ocfs2: switch to iter_file_splice_write()
  ->splice_write() via ->write_iter()
  bio_vec-backed iov_iter
  optimize copy_page_{to,from}_iter()
  bury generic_file_aio_{read,write}
  lustre: get rid of messing with iovecs
  ceph: switch to ->write_iter()
  ceph_sync_direct_write: stop poking into iov_iter guts
  ceph_sync_read: stop poking into iov_iter guts
  new helper: copy_page_from_iter()
  fuse: switch to ->write_iter()
  btrfs: switch to ->write_iter()
  ocfs2: switch to ->write_iter()
  xfs: switch to ->write_iter()
  ...

* pm-sleep:
  PM / sleep: trace events for device PM callbacks
  PM / sleep: trace events for suspend/resume

* pm-cpufreq:
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies

* acpi-general:
  ACPI: Fix bug when ACPI reset register is implemented in system memory

* acpi-video:
  ACPI / video: Change the default for video.use_native_backlight to 1

* acpi-hotplug:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges

We have a number of front-end drivers for SDHCI_PLTFM, some of them
use 'select MMC_SDHCI_PLTFM', others use 'depends on'. This is
inconsistent and confusing, and in one case has also led to a
build error because of incomplete dependencies:

warning: (MMC_SDHCI_PXAV3 && MMC_SDHCI_PXAV2 && MMC_SDHCI_BCM_KONA) selects MMC_SDHCI_PLTFM which has unmet direct dependencies (MMC && MMC_SDHCI)
drivers/built-in.o: In function `sdhci_sirf_resume':
:(.text+0xaaacb4): undefined reference to `sdhci_resume_host'
drivers/built-in.o: In function `sdhci_sirf_suspend':
:(.text+0xaaacf8): undefined reference to `sdhci_suspend_host'
drivers/built-in.o: In function `sdhci_sirf_probe':
:(.text+0xaaaf44): undefined reference to `sdhci_add_host'
:(.text+0xaaaf50): undefined reference to `sdhci_remove_host'

This changes Kconfig to use 'depends on MMC_SDHCI_PLTFM' for all these
cases, to fix the build error and make the logic more logical.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The MMC host driver should not select the pmic driver, since that
may have other dependencies, notably i2c in this case. It's not
clear what the exact requirement of the driver is, but to preserve
the behavior, this patch changes the 'select' into 'depends on',
meaning you now have to turn on TPS65010 explicitly and then
MMC_OMAP.

Found during randconfig build testing.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-omap@vger.kernel.org
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

gcc correctly points out that hw_state can be used uninitially
in the mvsd_setup_data() function. This rearranges the function
to ensure it always contains a proper value.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Chris Ball <chris@printf.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: linux-mmc@vger.kernel.org
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

This avoids a build error due to the use of flush_dcache_page.

drivers/mmc/host/atmel-mci.c: In function 'atmci_read_data_pio':
drivers/mmc/host/atmel-mci.c:1870:5: error: implicit declaration of function 'flush_dcache_page' [-Werror=implicit-function-declaration]
     flush_dcache_page(sg_page(sg));
     ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The sdhci core was refactored recently and some of those
refactorings required changes in every sdhci platform driver.
Those updates happened around the same time as when the msm
driver was merged so the refactorings missed the msm driver.
Hook in the basic library functions so that we can boot apq8074
dragonboards again instead of crashing when we try to jump to
NULL function pointers.
Reported-by: Kevin Hilman <khilman@linaro.org>
Cc: Georgi Djakov <gdjakov@mm-sol.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Georgi Djakov <gdjakov@mm-sol.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Fix a number of wrong print formats.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Dentry that had been through (or into) __dentry_kill() might be seen
by shrink_dentry_list(); that's normal, it'll be taken off the shrink
list and freed if __dentry_kill() has already finished.  The problem
is, its ->d_parent might be pointing to already freed dentry, so
lock_parent() needs to be careful.

We need to check that dentry hasn't already gone into __dentry_kill()
*and* grab rcu_read_lock() before dropping ->d_lock - the latter makes
sure that whatever we see in ->d_parent after dropping ->d_lock it
won't be freed until we drop rcu_read_lock().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Backmerge of dcache.c changes from mainline.  It's that, or complete
rebase...

Conflicts:
	fs/splice.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

no callers left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

ocfs2 was using a bunch of splice.c guts...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

iter_file_splice_write() - a ->splice_write() instance that gathers the
pipe buffers, builds a bio_vec-based iov_iter covering those and feeds
it to ->write_iter().  A bunch of simple cases coverted to that...

[AV: fixed the braino spotted by Cyrill]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull virtio updates from Rusty Russell:
 "Main excitement is a virtio_scsi fix for alloc holding spinlock on the
  abort path, which I refuse to CC stable since (1) I discovered it
  myself, and (2) it's been there forever with no reports"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock.
  virtio-rng: fixes for device registration/unregistration
  virtio-rng: fix boot with virtio-rng device
  virtio-rng: support multiple virtio-rng devices
  virtio_ccw: introduce device_lost in virtio_ccw_device
  virtio: virtio_break_device() to mark all virtqueues broken.

Pull vhost infrastructure updates from Michael S. Tsirkin:
 "This reworks vhost core dropping unnecessary RCU uses in favor of VQ
  mutexes which are used on fast path anyway.  This fixes worst-case
  latency for users which change the memory mappings a lot.  Memory
  allocation for vhost-net now supports fallback on vmalloc (same as for
  vhost-scsi) this makes it possible to create the device on systems
  where memory is very fragmented, with slightly lower performance"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: move memory pointer to VQs
  vhost: move acked_features to VQs
  vhost: replace rcu with mutex
  vhost-net: extend device allocation to vmalloc

Pull arch/tile changes from Chris Metcalf:
 "These mostly just address smaller issues reported to me"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables
  drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO
  replace strict_strto* call with kstrto*
  tile: Update comments for generic idle conversion
  tile: cleanup the comment in init_pgprot
  tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags

Pull module updates from Rusty Russell:
 "Most of this is cleaning up various driver sysfs permissions so we can
  re-add the perm check (we unified the module param and sysfs checks,
  but the module ones were stronger so we weakened them temporarily).

  Param parsing gets documented, and also "--" now forces args to be
  handed to init (and ignored by the kernel).

  Module NX/RO protections get tightened: we now set them before calling
  parse_args()"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: set nx before marking module MODULE_STATE_COMING.
  samples/kobject/: avoid world-writable sysfs files.
  drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files.
  drivers/staging/speakup/: avoid world-writable sysfs files.
  drivers/regulator/virtual: avoid world-writable sysfs files.
  drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files.
  drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files.
  drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files.
  drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.
  speakup: fix incorrect perms on speakup_acntsa.c
  cpumask.h: silence warning with -Wsign-compare
  Documentation: Update kernel-parameters.tx
  param: hand arguments after -- straight to init
  modpost: Fix resource leak in read_dump()

Pull thermal management update from Zhang Rui:
 "Specifics:

   - fix a bug in Exynos thermal driver, which overwrites the hardware
     trip point threshold when updating software trigger levels and
     results in emergency shutdown.  From: Tushar Behera.

   - add thermal sensor support for Armada 375 and 38x SoCs.  From
     Ezequiel Garcia.

   - add TMU (Thermal Management Unit) support for Exynos5260 and
     Exynos5420 SoCs.  From Naveen Krishna Chatradhi.

   - add support for the additional digital temperature sensors in the
     Intel SoCs like Bay Trail.  From: Srinivas Pandruvada.

   - a couple of cleanups and small fixes from Jingoo Han, Bartlomiej
     Zolnierkiewicz, Geert Uytterhoeven, Jacob Pan, Paul Walmsley and
     Lan,Tianyu"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (21 commits)
  thermal: spear: remove unnecessary OOM messages
  thermal: exynos: remove unnecessary OOM messages
  thermal: rcar: remove unnecessary OOM messages
  thermal: armada: Support Armada 380 SoC
  thermal: armada: Support Armada 375 SoC
  thermal: armada: Allow to specify an 'inverted readout' sensor
  thermal: armada: Pass the platform_device to init_sensor()
  thermal: armada: Add generic infrastructure to handle the sensor
  thermal: armada: Add infrastructure to support generic formulas
  thermal: armada: Rename armada_thermal_ops struct
  thermal/intel_powerclamp: add newer cpu ids
  thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync()
  thermal: samsung: Only update available threshold limits
  Thermal/int3403: Fix thermal hysteresis unit conversion
  thermal: Intel SoC DTS thermal
  thermal: samsung: Add TMU support for Exynos5260 SoCs
  thermal: samsung: Add TMU support for Exynos5420 SoCs
  thermal: samsung: change base_common to more meaningful base_second
  thermal: samsung: replace inten_ bit fields with intclr_
  thermal: offer Samsung thermal support only when ARCH_EXYNOS is defined
  ...

Merge tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "The majority of these changes are cleanups and fixes across all
  drivers.  Redundant error messages are removed and more PWM
  controllers set the .can_sleep flag to signal that they can't be used
  in atomic context.

  Support is added for the Broadcom Kona family of SoCs and the Intel
  LPSS driver can now probe PCI devices in addition to ACPI devices.
  Upon shutdown, the pwm-backlight driver will now power off the
  backlight.  It also uses the new descriptor-based GPIO API for more
  concise GPIO handling.

  A large chunk of these changes also converts platforms to use the
  lookup mechanism rather than relying on the global number space to
  reference PWM devices.  This is largely in preparation for more
  unification and cleanups in future patches.  Eventually it will allow
  the legacy PWM API to be removed"

* tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits)
  pwm: fsl-ftm: set pwm_chip can_sleep flag
  pwm: ab8500: Fix wrong value shift for disable/enable PWM
  pwm: samsung: do not set manual update bit in pwm_samsung_config
  pwm: lp3943: Set pwm_chip can_sleep flag
  pwm: atmel: set pwm_chip can_sleep flag
  pwm: mxs: set pwm_chip can_sleep flag
  pwm: tiehrpwm: inline accessor functions
  pwm: tiehrpwm: don't build PM related functions when not needed
  pwm-backlight: retrieve configured PWM period
  leds: leds-pwm: retrieve configured PWM period
  ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup
  ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup
  ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup
  pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members
  ARM: pxa: hx4700: initialize all the struct pwm_lookup members
  ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members
  pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data
  ARM: shmobile: armadillo: initialize all struct pwm_lookup members
  pwm: add period and polarity to struct pwm_lookup
  pwm: twl: Really disable twl6030 PWMs
  ...

After relatively recent changes in the ACPI-based PCI hotplug
(ACPIPHP) code, the acpiphp_check_host_bridge() executed for PCI
host bridges via acpi_pci_root_scan_dependent() doesn't do anything
useful, because those bridges do not have hotplug contexts.  That
happens by mistake, so fix it by making acpiphp_enumerate_slots()
add hotplug contexts to PCI host bridges too and modify
acpiphp_remove_slots() to drop those contexts for host bridges
as appropriate.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=76901
Fixes: 2d8b1d56 (ACPI / hotplug / PCI: Get rid of check_sub_bridges())
Reported-and-tested-by: Gavin Guo <gavin.guo@canonical.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull part two of ARM SoC updates from Arnd Bergmann:
 "This is a small follow-up to the larger ARM SoC updates merged last
  week, almost entirely for the keystone platform.

  The main change here is to use the new dma-ranges parsing code that
  came in through Russell's ARM tree.  This allows the keystone platform
  to do cache-coherent DMA and to finally support all the available
  physical memory when LPAE is enabled.

  Aside from this, the keystone reset driver has been rewritten, and
  there is a small bug fix to allow building the orion5x platform again"

* tag 'soc2-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: Drop use of meminfo since its not available anymore
  ARM: orion5x: fix mvebu_mbus_dt_init call
  ARM: configs: keystone: enable reset driver support
  ARM: dts: keystone: update reset node to work with reset driver
  ARM: keystone: remove redundant reset stuff
  ARM: keystone: Update the dma offset for non-dt platform devices
  ARM: keystone: Switch over to coherent memory address space
  ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80)
  ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG

Pull reiserfs and ext3 changes from Jan Kara:
 "Big reiserfs cleanup from Jeff, an ext3 deadlock fix, and some small
  cleanups"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (34 commits)
  reiserfs: Fix compilation breakage with CONFIG_REISERFS_CHECK
  ext3: Fix deadlock in data=journal mode when fs is frozen
  reiserfs: call truncate_setsize under tailpack mutex
  fs/jbd/revoke.c: replace shift loop by ilog2
  reiserfs: remove obsolete __constant_cpu_to_le32
  reiserfs: balance_leaf refactor, split up balance_leaf_when_delete
  reiserfs: balance_leaf refactor, format balance_leaf_finish_node
  reiserfs: balance_leaf refactor, format balance_leaf_new_nodes_paste
  reiserfs: balance_leaf refactor, format balance_leaf_paste_right
  reiserfs: balance_leaf refactor, format balance_leaf_insert_right
  reiserfs: balance_leaf refactor, format balance_leaf_paste_left
  reiserfs: balance_leaf refactor, format balance_leaf_insert_left
  reiserfs: balance_leaf refactor, pull out balance_leaf{left, right, new_nodes, finish_node}
  reiserfs: balance_leaf refactor, pull out balance_leaf_finish_node_paste
  reiserfs: balance_leaf refactor pull out balance_leaf_finish_node_insert
  reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_paste
  reiserfs: balance_leaf refactor, pull out balance_leaf_new_nodes_insert
  reiserfs: balance_leaf refactor, pull out balance_leaf_paste_right
  reiserfs: balance_leaf refactor, pull out balance_leaf_insert_right
  reiserfs: balance_leaf refactor, pull out balance_leaf_paste_left
  ...

Pull btrfs updates from Chris Mason:
 "The biggest change here is Josef's rework of the btrfs quota
  accounting, which improves the in-memory tracking of delayed extent
  operations.

  I had been working on Btrfs stack usage for a while, mostly because it
  had become impossible to do long stress runs with slab, lockdep and
  pagealloc debugging turned on without blowing the stack.  Even though
  you upgraded us to a nice king sized stack, I kept most of the
  patches.

  We also have some very hard to find corruption fixes, an awesome sysfs
  use after free, and the usual assortment of optimizations, cleanups
  and other fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (80 commits)
  Btrfs: convert smp_mb__{before,after}_clear_bit
  Btrfs: fix scrub_print_warning to handle skinny metadata extents
  Btrfs: make fsync work after cloning into a file
  Btrfs: use right type to get real comparison
  Btrfs: don't check nodes for extent items
  Btrfs: don't release invalid page in btrfs_page_exists_in_range()
  Btrfs: make sure we retry if page is a retriable exception
  Btrfs: make sure we retry if we couldn't get the page
  btrfs: replace EINVAL with EOPNOTSUPP for dev_replace raid56
  trivial: fs/btrfs/ioctl.c: fix typo s/substract/subtract/
  Btrfs: fix leaf corruption after __btrfs_drop_extents
  Btrfs: ensure btrfs_prev_leaf doesn't miss 1 item
  Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled
  btrfs: free delayed node outside of root->inode_lock
  btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAX
  Btrfs: fix transaction leak during fsync call
  btrfs: Avoid trucating page or punching hole in a already existed hole.
  Btrfs: update commit root on snapshot creation after orphan cleanup
  Btrfs: ioctl, don't re-lock extent range when not necessary
  Btrfs: avoid visiting all extent items when cloning a range
  ...

Pull xfs updates from Dave Chinner:
 "This update contains:
   - cleanup removing unused function args
   - rework of the filestreams allocator to use dentry cache parent
     lookups
   - new on-disk free inode btree and optimised inode allocator
   - various bug fixes
   - rework of internal attribute API
   - cleanup of superblock feature bit support to remove historic cruft
   - more fixes and minor cleanups
   - added a new directory/attribute geometry abstraction
   - yet more fixes and minor cleanups"

* tag 'xfs-for-linus-3.16-rc1' of git://oss.sgi.com/xfs/xfs: (86 commits)
  xfs: fix xfs_da_args sparse warning in xfs_readdir
  xfs: Fix rounding in xfs_alloc_fix_len()
  xfs: tone down writepage/releasepage WARN_ONs
  xfs: small cleanup in xfs_lowbit64()
  xfs: kill xfs_buf_geterror()
  xfs: xfs_readsb needs to check for magic numbers
  xfs: block allocation work needs to be kswapd aware
  xfs: remove redundant geometry information from xfs_da_state
  xfs: replace attr LBSIZE with xfs_da_geometry
  xfs: pass xfs_da_args to xfs_attr_leaf_newentsize
  xfs: use xfs_da_geometry for block size in attr code
  xfs: remove mp->m_dir_geo from directory logging
  xfs: reduce direct usage of mp->m_dir_geo
  xfs: move node entry counts to xfs_da_geometry
  xfs: convert dir/attr btree threshold to xfs_da_geometry
  xfs: convert m_dirblksize to xfs_da_geometry
  xfs: convert m_dirblkfsbs to xfs_da_geometry
  xfs: convert directory segment limits to xfs_da_geometry
  xfs: convert directory db conversion to xfs_da_geometry
  xfs: convert directory dablk conversion to xfs_da_geometry
  ...

Pull block layer fixes from Jens Axboe:
 "Final small batch of fixes to be included before -rc1.  Some general
  cleanups in here as well, but some of the blk-mq fixes we need for the
  NVMe conversion and/or scsi-mq.  The pull request contains:

   - Support for not merging across a specified "chunk size", if set by
     the driver.  Some NVMe devices perform poorly for IO that crosses
     such a chunk, so we need to support it generically as part of
     request merging avoid having to do complicated split logic.  From
     me.

   - Bump max tag depth to 10Ki tags.  Some scsi devices have a huge
     shared tag space.  Before we failed with EINVAL if a too large tag
     depth was specified, now we truncate it and pass back the actual
     value.  From me.

   - Various blk-mq rq init fixes from me and others.

   - A fix for enter on a dying queue for blk-mq from Keith.  This is
     needed to prevent oopsing on hot device removal.

   - Fixup for blk-mq timer addition from Ming Lei.

   - Small round of performance fixes for mtip32xx from Sam Bradshaw.

   - Minor stack leak fix from Rickard Strandqvist.

   - Two __init annotations from Fabian Frederick"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: add __init to blkcg_policy_register
  block: add __init to elv_register
  block: ensure that bio_add_page() always accepts a page for an empty bio
  blk-mq: add timer in blk_mq_start_request
  blk-mq: always initialize request->start_time
  block: blk-exec.c: Cleaning up local variable address returnd
  mtip32xx: minor performance enhancements
  blk-mq: ->timeout should be cleared in blk_mq_rq_ctx_init()
  blk-mq: don't allow queue entering for a dying queue
  blk-mq: bump max tag depth to 10K tags
  block: add blk_rq_set_block_pc()
  block: add notion of a chunk size for request merging

Pull MTD updates from Brian Norris:
 - refactor m25p80.c driver for use as a general SPI NOR framework for
   other drivers which may speak to SPI NOR flash without providing full
   SPI support (i.e., not part of drivers/spi/)
 - new Freescale QuadSPI driver (utilizing new SPI NOR framework)
 - updates for the STMicro "FSM" SPI NOR driver
 - fix sync/flush behavior on mtd_blkdevs
 - fixup subpage write support on a few NAND drivers
 - correct the MTD OOB test for odd-sized OOB areas
 - add BCH-16 support for OMAP NAND
 - fix warnings and trivial refactoring
 - utilize new ECC DT bindings in pxa3xx NAND driver
 - new LPDDR NVM driver
 - address a few assorted bugs caught by Coverity
 - add new imx6sx support for GPMI NAND
 - use a bounce buffer for NAND when non-DMA-able buffers are used

* tag 'for-linus-20140610' of git://git.infradead.org/linux-mtd: (77 commits)
  mtd: gpmi: add gpmi support for imx6sx
  mtd: maps: remove check for CONFIG_MTD_SUPERH_RESERVE
  mtd: bf5xx_nand: use the managed version of kzalloc
  mtd: pxa3xx_nand: make the driver work on big-endian systems
  mtd: nand: omap: fix omap_calculate_ecc_bch() for-loop error
  mtd: nand: r852: correct write_buf loop bounds
  mtd: nand_bbt: handle error case for nand_create_badblock_pattern()
  mtd: nand_bbt: remove unused variable
  mtd: maps: sc520cdp: fix warnings
  mtd: slram: fix unused variable warning
  mtd: pfow: remove unused variable
  mtd: lpddr: fix Kconfig dependency, for I/O accessors
  mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding
  mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
  mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling
  mtd: nand: Warn the user if the selected ECC strength is too weak
  mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ?
  mtd: nand: omap: add support for BCH16_ECC - NAND driver updates
  mtd: nand: omap: add support for BCH16_ECC - ELM driver updates
  mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates
  ...

Pull md updates from Neil Brown:
 "Assorted md fixes for 3.16

  Mostly performance improvements with a few corner-case bug fixes"

* tag 'md/3.16' of git://neil.brown.name/md:
  raid5: speedup sync_request processing
  md/raid5: deadlock between retry_aligned_read with barrier io
  raid5: add an option to avoid copy data from bio to stripe cache
  md/bitmap: remove confusing code from filemap_get_page.
  raid5: avoid release list until last reference of the stripe
  md: md_clear_badblocks should return an error code on failure.
  md/raid56: Don't perform reads to support writes until stripe is ready.
  md: refuse to change shape of array if it is active but read-only