- 03 Aug, 2021 3 commits
-
-
Arnd Bergmann authored
Merge tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.14-rc series Some fixes for regressions and boot issues for various devices: - Fix gpt12 system timer regression on earlier beagleboard revisions - Fix potential NULL pointer access for omap_hwmod_get_pwrdm() - Disable RNG on secure am335x variants as it's not accessible - Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing i2c0 bus speed for tps65218 - Fix typo for am437x-l4 can@0 node - Fix omap5 regression caused by vdds_1v8_main fixed-regulator * tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator ARM: dts: am437x-l4: fix typo in can@0 node ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218 bus: ti-sysc: AM3: RNG is GP only ARM: omap2+: hwmod: fix potential NULL pointer access bus: ti-sysc: Fix gpt12 system timer issue with reserved status Link: https://lore.kernel.org/r/pull-1627995895-406133@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Sparse reports a compile time warning when dereferencing an __iomem pointer: drivers/soc/ixp4xx/ixp4xx-qmgr.c:149:37: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:153:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:154:40: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:38: warning: dereference of noderef expression drivers/soc/ixp4xx/ixp4xx-qmgr.c:174:44: warning: dereference of noderef expression Use __raw_readl() here for consistency with the rest of the file. This should really get converted to some proper accessor, as the __raw functions are not meant to be used in drivers, but the driver has used these since the start, so for the moment, let's only fix the warning. Reported-by: kernel test robot <lkp@intel.com> Fixes: d4c9e9fc ("IXP42x: Add QMgr support for IXP425 rev. A0 processors.") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
When compile-testing with 64-bit resource_size_t, gcc reports an invalid printk format string: In file included from include/linux/dma-mapping.h:7, from drivers/soc/ixp4xx/ixp4xx-npe.c:15: drivers/soc/ixp4xx/ixp4xx-npe.c: In function 'ixp4xx_npe_probe': drivers/soc/ixp4xx/ixp4xx-npe.c:694:18: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] dev_info(dev, "NPE%d at 0x%08x-0x%08x not available\n", Use the special %pR format string to print the resources. Fixes: 0b458d7b ("soc: ixp4xx: npe: Pass addresses as resources") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 02 Aug, 2021 10 commits
-
-
Arnd Bergmann authored
Merge tag 'mvebu-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.14 (part 1) - Fix i2c property for armada-3720-turris-mox in order to use SFP - Add mmc alias on armada-3720-turris-mox to allow rootfs using the right mmc * tag 'mvebu-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers Link: https://lore.kernel.org/r/87k0l7zx4v.fsf@BL-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.14, round 1 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Set HW RTC ad default RTC - Disable EDPD LAN8710 feature as it is not a stable feature. - Fix touchscreen IRQ line assignment * tag 'stm32-dt-for-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM Link: https://lore.kernel.org/r/c0b6031b-2de7-2ef8-71b2-a0af8f475932@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'tee-kexec-fixes-for-v5.14' of git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes tee: Improve support for kexec and kdump This fixes several bugs uncovered while exercising the OP-TEE, ftpm (firmware TPM), and tee_bnxt_fw (Broadcom BNXT firmware manager) drivers with kexec and kdump (emergency kexec) based workflows. * tag 'tee-kexec-fixes-for-v5.14' of git://git.linaro.org:/people/jens.wiklander/linux-tee: firmware: tee_bnxt: Release TEE shm, session, and context during kexec tpm_ftpm_tee: Free and unregister TEE shared memory during kexec tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag tee: add tee_shm_alloc_kernel_buf() optee: Clear stale cache entries during initialization optee: fix tee out of memory failure seen during kexec reboot optee: Refuse to load the driver under the kdump kernel optee: Fix memory leak when failing to register shm pages Link: https://lore.kernel.org/r/20210726081039.GA2482361@jadeSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.14: - A couple of fixes on MMDC driver to add missing iounmap() and clk_disable_unprepare(), and a follow-up fix. - Fix missing-prototypes warning in SRC driver. - Revert commit 7d981405 ("soc: imx8m: change to use platform driver"), which breaks i.MX8M system that has CAAM driver enabled. - One fix on imx53-m53menlo pinctrl configuration. - Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent issues where the PHY would be unresponsive every once in a while. - Add missing flag for in-band signalling between PHY and MAC on kontron-sl28-var2 board to fix network support. - Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless noise issue. - Fix sysclk node name for LS1028A so that U-Boot is able to update the "clock-frequency" property. * tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz arm64: dts: ls1028: sl28: fix networking for variant 2 Revert "soc: imx8m: change to use platform driver" ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms ARM: imx: common: Move prototype outside the SMP block ARM: imx: add missing clk_disable_unprepare() ARM: imx: add missing iounmap() arm64: dts: ls1028a: fix node name for the sysclk Link: https://lore.kernel.org/r/20210726023221.GF5901@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
When this driver is disabled, the board file fails to build, so add a dependency: arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_preinit': arch/arm/mach-ixp4xx/goramo_mlr.c:472:9: error: implicit declaration of function 'ixp4xx_pci_preinit'; did you mean 'iop3xx_pci_preinit'? [-Werror=implicit-function-declaration] 472 | ixp4xx_pci_preinit(); | ^~~~~~~~~~~~~~~~~~ | iop3xx_pci_preinit arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_postinit': arch/arm/mach-ixp4xx/goramo_mlr.c:481:22: error: implicit declaration of function 'ixp4xx_pci_read' [-Werror=implicit-function-declaration] 481 | if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { | ^~~~~~~~~~~~~~~ arch/arm/mach-ixp4xx/goramo_mlr.c:231:35: error: 'IXP4XX_UART1_BASE_PHYS' undeclared here (not in a function) 231 | .start = IXP4XX_UART1_BASE_PHYS, | ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init': arch/arm/mach-ixp4xx/goramo_mlr.c:376:9: error: implicit declaration of function 'ixp4xx_sys_init' [-Werror=implicit-function-declaration] 376 | ixp4xx_sys_init(); | ^~~~~~~~~~~~~~~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: soc@kernel.org Link: https://lore.kernel.org/r/20210721151620.2373500-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Randconfig builds on the ixp4xx ethernet driver showed that the qmgr and npe drivers are not actually built even when compile testing is enabled: ERROR: modpost: "qmgr_stat_empty" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_enable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_set_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "__qmgr_request_queue" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_send_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_load_firmware" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_running" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_disable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_stat_below_low_watermark" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! Fix it by always entering the drivers/soc/ixp4xx/ directory, and fix the resulting compile test failures by removing the #include statements that prevent building on most other platforms. Fixes: 7a6c9dbb ("soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST") Fixes: fcf2d897 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210721211412.3537004-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Dmitry Osipenko authored
The regulator coupler drivers now use regulator-driver API function that isn't available during compile-testing. Make regulator coupler drivers dependent on CONFIG_REGULATOR in Kconfig. Fixes: 03978d42 ("soc/tegra: regulators: Bump voltages on system reboot") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'tegra-for-5.14-rc3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.14-rc3 This contains one more fix for SMMU enablement on Tegra194, this time for PCIe. * tag 'tegra-for-5.14-rc3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable SMMU support for PCIe on Tegra194 Link: https://lore.kernel.org/r/20210716233858.10096-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>
-
Sudeep Holla authored
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Linus Torvalds authored
-
- 01 Aug, 2021 3 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top' abort, uncovering a design flaw on how namespace information is kept. The fix for that is more than we can do right now, leave it for the next merge window. - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up the decoding of some records. - Fix PMU alias matching. Thanks to James Clark and John Garry for these fixes. * tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "perf map: Fix dso->nsinfo refcounting" perf pmu: Fix alias matching perf cs-etm: Split --dump-raw-trace by AUX records
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Don't use r30 in VDSO code, to avoid breaking existing Go lang programs. - Change an export symbol to allow non-GPL modules to use spinlocks again. Thanks to Paul Menzel, and Srikar Dronamraju. * tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Don't use r30 to avoid breaking Go lang powerpc/pseries: Fix regression while building external modules
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "This contains a bunch of bug fixes in XFS. Dave and I have been busy the last couple of weeks to find and fix as many log recovery bugs as we can find; here are the results so far. Go fstests -g recoveryloop! ;) - Fix a number of coordination bugs relating to cache flushes for metadata writeback, cache flushes for multi-buffer log writes, and FUA writes for single-buffer log writes - Fix a bug with incorrect replay of attr3 blocks - Fix unnecessary stalls when flushing logs to disk - Fix spoofing problems when recovering realtime bitmap blocks" * tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent spoofing of rtbitmap blocks when recovering buffers xfs: limit iclog tail updates xfs: need to see iclog flags in tracing xfs: Enforce attr3 buffer recovery order xfs: logging the on disk inode LSN can make it go backwards xfs: avoid unnecessary waits in xfs_log_force_lsn() xfs: log forces imply data device cache flushes xfs: factor out forced iclog flushes xfs: fix ordering violation between cache flushes and tail updates xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog xfs: external logs need to flush data device xfs: flush data dev on external log write
-
- 31 Jul, 2021 1 commit
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three cifs/smb3 fixes, including two for stable, and a fix for an fallocate problem noticed by Clang" * tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add missing parsing of backupuid smb3: rc uninitialized in one fallocate path SMB3: fix readpage for large swap cache
-
- 30 Jul, 2021 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211) and netfilter trees. Current release - regressions: - mac80211: fix starting aggregation sessions on mesh interfaces Current release - new code bugs: - sctp: send pmtu probe only if packet loss in Search Complete state - bnxt_en: add missing periodic PHC overflow check - devlink: fix phys_port_name of virtual port and merge error - hns3: change the method of obtaining default ptp cycle - can: mcba_usb_start(): add missing urb->transfer_dma initialization Previous releases - regressions: - set true network header for ECN decapsulation - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY - sctp: fix return value check in __sctp_rcv_asconf_lookup Previous releases - always broken: - bpf: - more spectre corner case fixes, introduce a BPF nospec instruction for mitigating Spectre v4 - fix OOB read when printing XDP link fdinfo - sockmap: fix cleanup related races - mac80211: fix enabling 4-address mode on a sta vif after assoc - can: - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF - j1939: j1939_session_deactivate(): clarify lifetime of session object, avoid UAF - fix number of identical memory leaks in USB drivers - tipc: - do not blindly write skb_shinfo frags when doing decryption - fix sleeping in tipc accept routine" * tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) gve: Update MAINTAINERS list can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver bpf: Fix leakage due to insufficient speculative store bypass mitigation bpf: Introduce BPF nospec instruction for mitigating Spectre v4 sis900: Fix missing pci_disable_device() in probe and remove net: let flow have same hash in two directions nfc: nfcsim: fix use after free during module unload tulip: windbond-840: Fix missing pci_disable_device() in probe and remove sctp: fix return value check in __sctp_rcv_asconf_lookup nfc: s3fwrn5: fix undefined parameter values in dev_err() net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32 net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev() net/mlx5: Unload device upon firmware fatal error net/mlx5e: Fix page allocation failure for ptp-RQ over SF net/mlx5e: Fix page allocation failure for trap-RQ over SF ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert a recent IRQ resources handling modification that turned out to be problematic, fix suspend-to-idle handling on AMD platforms to take upcoming systems into account properly and fix the retrieval of the DPTF attributes of the PCH FIVR. Specifics: - Revert recent change of the ACPI IRQ resources handling that attempted to improve the ACPI IRQ override selection logic, but introduced serious regressions on some systems (Hui Wang). - Fix up quirks for AMD platforms in the suspend-to-idle support code so as to take upcoming systems using uPEP HID AMDI007 into account as appropriate (Mario Limonciello). - Fix the code retrieving DPTF attributes of the PCH FIVR so that it agrees on the return data type with the ACPI control method evaluated for this purpose (Srinivas Pandruvada)" * tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Fix reading of attributes Revert "ACPI: resources: Add checks for ACPI IRQ override" ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007
-
Linus Torvalds authored
Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup logic") we have sanitized the pipe write logic, and would only try to wake up readers if they needed it. In particular, if the pipe already had data in it before the write, there was no point in trying to wake up a reader, since any existing readers must have been aware of the pre-existing data already. Doing extraneous wakeups will only cause potential thundering herd problems. However, it turns out that some Android libraries have misused the EPOLL interface, and expected "edge triggered" be to "any new write will trigger it". Even if there was no edge in sight. Quoting Sandeep Patil: "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup logic') changed pipe write logic to wakeup readers only if the pipe was empty at the time of write. However, there are libraries that relied upon the older behavior for notification scheme similar to what's described in [1] One such library 'realm-core'[2] is used by numerous Android applications. The library uses a similar notification mechanism as GNU Make but it never drains the pipe until it is full. When Android moved to v5.10 kernel, all applications using this library stopped working. The library has since been fixed[3] but it will be a while before all applications incorporate the updated library" Our regression rule for the kernel is that if applications break from new behavior, it's a regression, even if it was because the application did something patently wrong. Also note the original report [4] by Michal Kerrisk about a test for this epoll behavior - but at that point we didn't know of any actual broken use case. So add the extraneous wakeup, to approximate the old behavior. [ I say "approximate", because the exact old behavior was to do a wakeup not for each write(), but for each pipe buffer chunk that was filled in. The behavior introduced by this change is not that - this is just "every write will cause a wakeup, whether necessary or not", which seems to be sufficient for the broken library use. ] It's worth noting that this adds the extraneous wakeup only for the write side, while the read side still considers the "edge" to be purely about reading enough from the pipe to allow further writes. See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic") for the pipe read case, which remains that "only wake up if the pipe was full, and we read something from it". Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1] Link: https://github.com/realm/realm-core [2] Link: https://github.com/realm/realm-core/issues/4666 [3] Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4] Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by: Sandeep Patil <sspatil@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arnaldo Carvalho de Melo authored
This makes 'perf top' abort in some cases, and the right fix will involve surgery that is too much to do at this stage, so revert for now and fix it in the next merge window. This reverts commit 2d6b74ba. Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Rafael J. Wysocki authored
* acpi-resources: Revert "ACPI: resources: Add checks for ACPI IRQ override" * acpi-dptf: ACPI: DPTF: Fix reading of attributes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - gendisk freeing fix (Christoph) - blk-iocost wake ordering fix (Tejun) - tag allocation error handling fix (John) - loop locking fix. While this isn't the prettiest fix in the world, nobody has any good alternatives for 5.14. Something to likely revisit for 5.15. (Tetsuo) * tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block: block: delay freeing the gendisk blk-iocost: fix operation ordering in iocg_wake_fn() blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling loop: reintroduce global lock for safe loop_validate_file() traversal
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - A fix for block backed reissue (me) - Reissue context hardening (me) - Async link locking fix (Pavel) * tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block: io_uring: fix poll requests leaking second poll entries io_uring: don't block level reissue off completion path io_uring: always reissue from task_work context io_uring: fix race in unified task_work running io_uring: fix io_prep_async_link locking
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull libata fixlets from Jens Axboe: - A fix for PIO highmem (Christoph) - Kill HAVE_IDE as it's now unused (Lukas) * tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block: arch: Kconfig: clean up obsolete use of HAVE_IDE libata: fix ata_pio_sector for CONFIG_HIGHMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fix -Warray-bounds warning, to help external patchset to make it default treewide - fix writeable device accounting (syzbot report) - fix fsync and log replay after a rename and inode eviction - fix potentially lost error code when submitting multiple bios for compressed range * tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: calculate number of eb pages properly in csum_tree_block btrfs: fix rw device counting in __btrfs_free_extra_devids btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction btrfs: mark compressed range uptodate only if all bio succeed
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - resume timing fix for intel-ish driver (Ye Xiang) - fix for using incorrect MMIO register in amd_sfh driver (Dylan MacKenzie) - Cintiq 24HDT / 27QHDT regression fix and touch processing fix for Wacom driver (Jason Gerecke) - device removal bugfix for ft260 driver (Michael Zaidman) - other small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: ft260: fix device removal due to USB disconnect HID: wacom: Skip processing of touches with negative slot values HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible" HID: apple: Add support for Keychron K1 wireless keyboard HID: fix typo in Kconfig HID: ft260: fix format type warning in ft260_word_show() HID: amd_sfh: Use correct MMIO register for DMA address HID: asus: Remove check for same LED brightness on set HID: intel-ish-hid: use async resume function
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "7 patches. Subsystems affected by this patch series: lib, ocfs2, and mm (slub, migration, and memcg)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook() slub: fix unreclaimable slab stat for bulk free mm/migrate: fix NR_ISOLATED corruption on 64-bit mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code ocfs2: issue zeroout to EOF blocks ocfs2: fix zero out valid data lib/test_string.c: move string selftest in the Runtime Testing menu
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-07-30 The first patch is by me and adds Yasushi SHOJI as a reviewer for the Microchip CAN BUS Analyzer Tool driver. Dan Carpenter's patch fixes a signedness bug in the hi311x driver. Pavel Skripkin provides 4 patches, the first targets the mcba_usb driver by adding the missing urb->transfer_dma initialization, which was broken in a previous commit. The last 3 patches fix a memory leak in the usb_8dev, ems_usb and esd_usb2 driver. * tag 'linux-can-fixes-for-5.14-20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver ==================== Link: https://lore.kernel.org/r/20210730070526.1699867-1-mkl@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wang Hai authored
When I use kfree_rcu() to free a large memory allocated by kmalloc_node(), the following dump occurs. BUG: kernel NULL pointer dereference, address: 0000000000000020 [...] Oops: 0000 [#1] SMP [...] Workqueue: events kfree_rcu_work RIP: 0010:__obj_to_index include/linux/slub_def.h:182 [inline] RIP: 0010:obj_to_index include/linux/slub_def.h:191 [inline] RIP: 0010:memcg_slab_free_hook+0x120/0x260 mm/slab.h:363 [...] Call Trace: kmem_cache_free_bulk+0x58/0x630 mm/slub.c:3293 kfree_bulk include/linux/slab.h:413 [inline] kfree_rcu_work+0x1ab/0x200 kernel/rcu/tree.c:3300 process_one_work+0x207/0x530 kernel/workqueue.c:2276 worker_thread+0x320/0x610 kernel/workqueue.c:2422 kthread+0x13d/0x160 kernel/kthread.c:313 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 When kmalloc_node() a large memory, page is allocated, not slab, so when freeing memory via kfree_rcu(), this large memory should not be used by memcg_slab_free_hook(), because memcg_slab_free_hook() is is used for slab. Using page_objcgs_check() instead of page_objcgs() in memcg_slab_free_hook() to fix this bug. Link: https://lkml.kernel.org/r/20210728145655.274476-1-wanghai38@huawei.com Fixes: 270c6a71 ("mm: memcontrol/slab: Use helpers to access slab page's memcg_data") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Shakeel Butt authored
SLUB uses page allocator for higher order allocations and update unreclaimable slab stat for such allocations. At the moment, the bulk free for SLUB does not share code with normal free code path for these type of allocations and have missed the stat update. So, fix the stat update by common code. The user visible impact of the bug is the potential of inconsistent unreclaimable slab stat visible through meminfo and vmstat. Link: https://lkml.kernel.org/r/20210728155354.3440560-1-shakeelb@google.com Fixes: 6a486c0a ("mm, sl[ou]b: improve memory accounting") Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Aneesh Kumar K.V authored
Similar to commit 2da9f630 ("mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit") avoid using unsigned int for nr_pages. With unsigned int type the large unsigned int converts to a large positive signed long. Symptoms include CMA allocations hanging forever due to alloc_contig_range->...->isolate_migratepages_block waiting forever in "while (unlikely(too_many_isolated(pgdat)))". Link: https://lkml.kernel.org/r/20210728042531.359409-1-aneesh.kumar@linux.ibm.com Fixes: c5fc5c3a ("mm: migrate: account THP NUMA migration counters correctly") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
Dan Carpenter reports: The patch 2d146aa3: "mm: memcontrol: switch to rstat" from Apr 29, 2021, leads to the following static checker warning: kernel/cgroup/rstat.c:200 cgroup_rstat_flush() warn: sleeping in atomic context mm/memcontrol.c 3572 static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap) 3573 { 3574 unsigned long val; 3575 3576 if (mem_cgroup_is_root(memcg)) { 3577 cgroup_rstat_flush(memcg->css.cgroup); ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is from static analysis and potentially a false positive. The problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold() which holds an rcu_read_lock(). And the cgroup_rstat_flush() function can sleep. 3578 val = memcg_page_state(memcg, NR_FILE_PAGES) + 3579 memcg_page_state(memcg, NR_ANON_MAPPED); 3580 if (swap) 3581 val += memcg_page_state(memcg, MEMCG_SWAP); 3582 } else { 3583 if (!swap) 3584 val = page_counter_read(&memcg->memory); 3585 else 3586 val = page_counter_read(&memcg->memsw); 3587 } 3588 return val; 3589 } __mem_cgroup_threshold() indeed holds the rcu lock. In addition, the thresholding code is invoked during stat changes, and those contexts have irqs disabled as well. If the lock breaking occurs inside the flush function, it will result in a sleep from an atomic context. Use the irqsafe flushing variant in mem_cgroup_usage() to fix this. Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org Fixes: 2d146aa3 ("mm: memcontrol: switch to rstat") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Chris Down <chris@chrisdown.name> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
For punch holes in EOF blocks, fallocate used buffer write to zero the EOF blocks in last cluster. But since ->writepage will ignore EOF pages, those zeros will not be flushed. This "looks" ok as commit 6bba4471 ("ocfs2: fix data corruption by fallocate") will zero the EOF blocks when extend the file size, but it isn't. The problem happened on those EOF pages, before writeback, those pages had DIRTY flag set and all buffer_head in them also had DIRTY flag set, when writeback run by write_cache_pages(), DIRTY flag on the page was cleared, but DIRTY flag on the buffer_head not. When next write happened to those EOF pages, since buffer_head already had DIRTY flag set, it would not mark page DIRTY again. That made writeback ignore them forever. That will cause data corruption. Even directio write can't work because it will fail when trying to drop pages caches before direct io, as it found the buffer_head for those pages still had DIRTY flag set, then it will fall back to buffer io mode. To make a summary of the issue, as writeback ingores EOF pages, once any EOF page is generated, any write to it will only go to the page cache, it will never be flushed to disk even file size extends and that page is not EOF page any more. The fix is to avoid zero EOF blocks with buffer write. The following code snippet from qemu-img could trigger the corruption. 656 open("6b3711ae-3306-4bdd-823c-cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11 ... 660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2275868672, 327680 <unfinished ...> 660 fallocate(11, 0, 2275868672, 327680) = 0 658 pwrite64(11, " Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.comSigned-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Junxiao Bi authored
If append-dio feature is enabled, direct-io write and fallocate could run in parallel to extend file size, fallocate used "orig_isize" to record i_size before taking "ip_alloc_sem", when ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed out. Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com Fixes: 6bba4471 ("ocfs2: fix data corruption by fallocate") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matteo Croce authored
STRING_SELFTEST is presented in the "Library routines" menu. Move it in Kernel hacking > Kernel Testing and Coverage > Runtime Testing together with other similar tests found in lib/ --- Runtime Testing <*> Test functions located in the hexdump module at runtime <*> Test string functions (NEW) <*> Test functions located in the string_helpers module at runtime <*> Test strscpy*() family of functions at runtime <*> Test kstrto*() family of functions at runtime <*> Test printf() family of functions at runtime <*> Test scanf() family of functions at runtime Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.comSigned-off-by: Matteo Croce <mcroce@microsoft.com> Cc: Peter Rosin <peda@axentia.se> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Catherine Sullivan authored
The team maintaining the gve driver has undergone some changes, this updates the MAINTAINERS file accordingly. Signed-off-by: Catherine Sullivan <csully@google.com> Signed-off-by: Jon Olson <jonolson@google.com> Signed-off-by: David Awogbemila <awogbemila@google.com> Signed-off-by: Jeroen de Borst <jeroendb@google.com> Link: https://lore.kernel.org/r/20210729155258.442650-1-csully@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Lukas Bulwahn authored
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is supported. As IDE support and the HAVE_IDE config vanishes with commit b7fb14d3 ("ide: remove the legacy ide driver"), there is no need to mention HAVE_IDE in all those arch-specific Kconfig files. The issue was identified with ./scripts/checkkconfigsymbols.py. Fixes: b7fb14d3 ("ide: remove the legacy ide driver") Suggested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.comReviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Marek Vasut authored
While 7e5f3155 ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2") fixed the LED0 assignment on the PDK2 board, the same commit did not update the touchscreen IRQ line assignment, which is the same GPIO line, shared between the LED0 output and touchscreen IRQ input. To make this more convoluted, the same EXTI input (not the same GPIO line) is shared between Button B which is Active-Low IRQ, and touchscreen IRQ which is Edge-Falling IRQ, which cannot be used at the same time. In case the LCD board with touchscreen is in use, which is the case here, LED0 must be disabled, Button B must be polled, so the touchscreen interrupt works as it should. Update the touchscreen IRQ line assignment, disable LED0 and use polled GPIO button driver for Button B, since the DT here describes baseboard with LCD board. Fixes: 7e5f3155 ("ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-
Marek Vasut authored
The LAN8710 Energy Detect Power Down (EDPD) functionality might cause unreliable cable detection. There are multiple accounts of this in the SMSC PHY driver patches which attempted to make EDPD reliable, however it seems there is always some sort of corner case left. Unfortunatelly, there is no errata documented which would confirm this to be a silicon bug on the LAN87xx series of PHYs (LAN8700, LAN8710, LAN8720 at least). Disable EDPD on the DHCOM SoM, just like multiple other boards already do as well, to make the cable detection reliable. Fixes: 34e0c784 ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
-