[ Upstream commit 08f51385 ]

This condition wasn't adjusted when PHY_IGNORE_INTERRUPT (-2) was added
long ago. In case of PHY_IGNORE_INTERRUPT the MAC interrupt indicates
also PHY state changes and we should do what the symbol says.

Fixes: 84a527a4 ("net: phylib: fix interrupts re-enablement in phy_start")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0a8a1bf1 ]

Until now, we assumed that in case of error when adding FDB entries, the
write operation will fail, but this is not the case. Instead, we need to
check that the number of entries reported in the response is equal to
the number of entries specified in the request.

Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4a31a6b1 ]

Fix dst reference count leak in sctp_v4_get_dst() introduced in commit
410f0383 ("sctp: add routing output fallback"):

When walking the address_list, successive ip_route_output_key() calls
may return the same rt->dst with the reference incremented on each call.

The code would not decrement the dst refcount when the dst pointer was
identical from the previous iteration, causing the dst refcnt leak.

Testcase:
  ip netns add TEST
  ip netns exec TEST ip link set lo up
  ip link add dummy0 type dummy
  ip link add dummy1 type dummy
  ip link add dummy2 type dummy
  ip link set dev dummy0 netns TEST
  ip link set dev dummy1 netns TEST
  ip link set dev dummy2 netns TEST
  ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0
  ip netns exec TEST ip link set dummy0 up
  ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1
  ip netns exec TEST ip link set dummy1 up
  ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2
  ip netns exec TEST ip link set dummy2 up
  ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3
  ip netns del TEST

In 4.4 and 4.9 kernels this results to:
  [  354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1
  ...

Fixes: 410f0383 ("sctp: add routing output fallback")
Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 15f35d49 ]

Since UDP-Lite is always using checksum, the following path is
triggered when calculating pseudo header for it:

  udp4_csum_init() or udp6_csum_init()
    skb_checksum_init_zero_check()
      __skb_checksum_validate_complete()

The problem can appear if skb->len is less than CHECKSUM_BREAK. In
this particular case __skb_checksum_validate_complete() also invokes
__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
that covers only part of a packet, the function will return bad
checksum and the packet will be dropped.

It can be fixed if we skip skb_checksum_init_zero_check() and only
set the required pseudo header checksum for UDP-Lite with partial
checksum before udp4_csum_init()/udp6_csum_init() functions return.

Fixes: ed70fcfc ("net: Call skb_checksum_init in IPv4")
Fixes: e4f45b7f ("net: Call skb_checksum_init in IPv6")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 77f840e3 ]

PPP units don't hold any reference on the channels connected to it.
It is the channel's responsibility to ensure that it disconnects from
its unit before being destroyed.
In practice, this is ensured by ppp_unregister_channel() disconnecting
the channel from the unit before dropping a reference on the channel.

However, it is possible for an unregistered channel to connect to a PPP
unit: register a channel with ppp_register_net_channel(), attach a
/dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel
with ppp_unregister_channel() and finally connect the /dev/ppp file to
a PPP unit with ioctl(PPPIOCCONNECT).

Once in this situation, the channel is only held by the /dev/ppp file,
which can be released at anytime and free the channel without letting
the parent PPP unit know. Then the ppp structure ends up with dangling
pointers in its ->channels list.

Prevent this scenario by forbidding unregistered channels from
connecting to PPP units. This maintains the code logic by keeping
ppp_unregister_channel() responsible from disconnecting the channel if
necessary and avoids modification on the reference counting mechanism.

This issue seems to predate git history (successfully reproduced on
Linux 2.6.26 and earlier PPP commits are unrelated).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit cb9f7a9a ]

Nowadays, nlmsg_multicast() returns only 0 or -ESRCH but this was not the
case when commit 134e6375 was pushed.
However, there was no reason to stop the loop if a netns does not have
listeners.
Returns -ESRCH only if there was no listeners in all netns.

To avoid having the same problem in the future, I didn't take the
assumption that nlmsg_multicast() returns only 0 or -ESRCH.

Fixes: 134e6375 ("genetlink: make netns aware")
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c7272c2f ]

According to RFC 1191 sections 3 and 4, ICMP frag-needed messages
indicating an MTU below 68 should be rejected:

    A host MUST never reduce its estimate of the Path MTU below 68
    octets.

and (talking about ICMP frag-needed's Next-Hop MTU field):

    This field will never contain a value less than 68, since every
    router "must be able to forward a datagram of 68 octets without
    fragmentation".

Furthermore, by letting net.ipv4.route.min_pmtu be set to negative
values, we can end up with a very large PMTU when (-1) is cast into u32.

Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to
unsigned ints.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ac5b7019 ]

netif_set_real_num_tx_queues() can be called when netdev is up.
That usually happens when user requests change of number of
channels/rings with ethtool -L.  The procedure for changing
the number of queues involves resetting the qdiscs and setting
dev->num_tx_queues to the new value.  When the new value is
lower than the old one, extra care has to be taken to ensure
ordering of accesses to the number of queues vs qdisc reset.

Currently the queues are reset before new dev->num_tx_queues
is assigned, leaving a window of time where packets can be
enqueued onto the queues going down, leading to a likely
crash in the drivers, since most drivers don't check if TX
skbs are assigned to an active queue.

Fixes: e6484930 ("net: allocate tx queues in register_netdevice")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ca79bec2 ]

gcc-8 has a new warning that detects overlapping input and output arguments
in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(),
which is actually correct:

net/ipv6/sit.c: In function 'sit_init_net':
net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

The problem here is that the logic detecting the memcpy() arguments finds them
to be the same, but the conditional that tests for the input and output of
ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant.

We know that netdev_priv(t->dev) is the same as t for a tunnel device,
and comparing "dev" directly here lets the compiler figure out as well
that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so
it no longer warns.

This code is old, so Cc stable to make sure that we don't get the warning
for older kernels built with new gcc.

Cc: Martin Sebor <msebor@gmail.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b6c3bad1 ]

Sometimes when physical lines have a just good noise to make the protocol
handshaking fail, but the carrier detect still good. Then after remove of
the noise, nobody will trigger this protocol to be start again to cause
the link to never come back. The fix is when the carrier is still on, not
terminate the protocol handshaking.
Signed-off-by: Denis Du <dudenis2000@yahoo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a8c6db1d ]

In fib_nh_match(), if output interface or gateway are passed in
the FIB configuration, we don't have to check next hops of
multipath routes to conclude whether we have a match or not.

However, we might still have routes with different realms
matching the same output interface and gateway configuration,
and this needs to cause the match to fail. Otherwise the first
route inserted in the FIB will match, regardless of the realms:

 # ip route add 1.1.1.1 dev eth0 table 1234 realms 1/2
 # ip route append 1.1.1.1 dev eth0 table 1234 realms 3/4
 # ip route list table 1234
 1.1.1.1 dev eth0 scope link realms 1/2
 1.1.1.1 dev eth0 scope link realms 3/4
 # ip route del 1.1.1.1 dev ens3 table 1234 realms 3/4
 # ip route list table 1234
 1.1.1.1 dev ens3 scope link realms 3/4

whereas route with realms 3/4 should have been deleted instead.

Explicitly check for fc_flow passed in the FIB configuration
(this comes from RTA_FLOW extracted by rtm_to_fib_config()) and
fail matching if it differs from nh_tclassid.

The handling of RTA_FLOW for multipath routes later in
fib_nh_match() is still needed, as we can have multiple RTA_FLOW
attributes that need to be matched against the tclassid of each
next hop.

v2: Check that fc_flow is set before discarding the match, so
    that the user can still select the first matching rule by
    not specifying any realm, as suggested by David Ahern.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1b12580a ]

Now br_sysfs_if file flush doesn't have attr show. To read it will
cause kernel panic after users chmod u+r this file.

Xiong found this issue when running the commands:

  ip link add br0 type bridge
  ip link add type veth
  ip link set veth0 master br0
  chmod u+r /sys/devices/virtual/net/veth0/brport/flush
  timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush

kernel crashed with NULL a pointer dereference call trace.

This patch is to fix it by return -EINVAL when brport_attr->show
is null, just the same as the check for brport_attr->store in
brport_store().

Fixes: 9cf63747 ("bridge: add sysfs hook to flush forwarding table")
Reported-by: Xiong Zhou <xzhou@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The backport of upstream commit 45d55e7b ("x86/apic/vector: Fix off by
one in error path") missed to fixup the legacy interrupt data which is not
longer available upstream.

Handle legacy irq data correctly by clearing the legacy storage to prevent
use after free.

Fixes: 7fd13353 ("x86/apic/vector: Fix off by one in error path") - 4.4.y
Fixes: c557481a ("x86/apic/vector: Fix off by one in error path") - 4.9.y
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b87b6194 upstream.

Before, if cb->start() failed, the module reference would never be put,
because cb->cb_running is intentionally false at this point. Users are
generally annoyed by this because they can no longer unload modules that
leak references. Also, it may be possible to tediously wrap a reference
counter back to zero, especially since module.c still uses atomic_inc
instead of refcount_inc.

This patch expands the error path to simply call module_put if
cb->start() fails.

Fixes: 41c87425 ("netlink: do not set cb_running if dump's start() errs")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 39772f0a upstream.

The locking protocols in md assume that a device will
never be removed from an array during resync/recovery/reshape.
When that isn't happening, rcu or reconfig_mutex is needed
to protect an rdev pointer while taking a refcount.  When
it is happening, that protection isn't needed.

Unfortunately there are cases were remove_and_add_spares() is
called when recovery might be happening: is state_store(),
slot_store() and hot_remove_disk().
In each case, this is just an optimization, to try to expedite
removal from the personality so the device can be removed from
the array.  If resync etc is happening, we just have to wait
for md_check_recover to find a suitable time to call
remove_and_add_spares().

This optimization and not essential so it doesn't
matter if it fails.
So change remove_and_add_spares() to abort early if
resync/recovery/reshape is happening, unless it is called
from md_check_recovery() as part of a newly started recovery.
The parameter "this" is only NULL when called from
md_check_recovery() so when it is NULL, there is no need to abort.

As this can result in a NULL dereference, the fix is suitable
for -stable.

cc: yuyufen <yuyufen@huawei.com>
Cc: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Fixes: 8430e7e0 ("md: disconnect device from personality before trying to remove it.")
Cc: stable@ver.kernel.org (v4.8+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 18bf3c3e upstream.

Flush indirect branches when switching into a process that marked itself
non dumpable. This protects high value processes like gpg better,
without having too high performance overhead.

If done naïvely, we could switch to a kernel idle thread and then back
to the original process, such as:

    process A -> idle -> process A

In such scenario, we do not have to do IBPB here even though the process
is non-dumpable, as we are switching back to the same process after a
hiatus.

To avoid the redundant IBPB, which is expensive, we track the last mm
user context ID. The cost is to have an extra u64 mm context id to track
the last mm we were using before switching to the init_mm used by idle.
Avoiding the extra IBPB is probably worth the extra memory for this
common scenario.

For those cases where tlb_defer_switch_to_init_mm() returns true (non
PCID), lazy tlb will defer switch to init_mm, so we will not be changing
the mm for the process A -> idle -> process A switch. So IBPB will be
skipped for this case.

Thanks to the reviewers and Andy Lutomirski for the suggestion of
using ctx_id which got rid of the problem of mm pointer recycling.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ak@linux.intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: linux@dominikbrodowski.net
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: luto@kernel.org
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/1517263487-3708-1-git-send-email-dwmw@amazon.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f39681ed upstream.

This adds two new variables to mmu_context_t: ctx_id and tlb_gen.
ctx_id uniquely identifies the mm_struct and will never be reused.
For a given mm_struct (and hence ctx_id), tlb_gen is a monotonic
count of the number of times that a TLB flush has been requested.
The pair (ctx_id, tlb_gen) can be used as an identifier for TLB
flush actions and will be used in subsequent patches to reliably
determine whether all needed TLB flushes have occurred on a given
CPU.

This patch is split out for ease of review.  By itself, it has no
real effect other than creating and updating the new variables.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/413a91c24dab3ed0caa5f4e4d017d87b0857f920.1498751203.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 74402055 upstream.

The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1.  The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at time.

This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz

Fixes: 687c2767 ("ARM: dts: Add minimal support for LogicPD Torpedo
DM3730 devkit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 84c7efd6 upstream.

The pinmuxing was missing for I2C1 which was causing intermittent issues
with the PMIC which is connected to I2C1.  The bootloader did not quite
configure the I2C1 either, so when running at 2.6MHz, it was generating
errors at times.

This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz

Fixes: ab8dd3ae ("ARM: DTS: Add minimal Support for Logic PD DM3730
SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit feb7695f upstream.

If only a subset of the devices associated with multiple regions support
a given special operation (eg. DISCARD) then the dec_count() that is
used to set error for the region must increment the io->count.

Otherwise, when the dec_count() is called it can cause the dm-io
caller's bio to be completed multiple times.  As was reported against
the dm-mirror target that had mirror legs with a mix of discard
capabilities.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077Reported-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee8bdfb6 upstream.

Even though it is unconventional, some PCIe host implementations omit the
root ports entirely, and simply consist of a host bridge (which is not
modeled as a device in the PCI hierarchy) and a link.

When the downstream device is an endpoint, our current code does not seem
to mind this unusual configuration. However, when PCIe switches are
involved, the ASPM code assumes that any downstream switch port has a
parent, and blindly dereferences the bus->parent->self field of the pci_dev
struct to chain the downstream link state to the link state of the root
port. Given that the root port is missing, the link is not modeled at all,
and nor is the link state, and attempting to access it results in a NULL
pointer dereference and a crash.

Avoid this by allowing the link state chain to terminate at the downstream
port if no root port exists.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 946fbbc1 upstream.

vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving
branch hints to the compiler can actually make a substantial cycle
difference by keeping the fast path contiguous in memory.

With this optimization, the retpoline-guest/retpoline-host case is
about 50 cycles faster.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ecb586bd upstream.

Having a paravirt indirect call in the IBRS restore path is not a
good idea, since we are trying to protect from speculative execution
of bogus indirect branch targets.  It is also slower, so use
native_wrmsrl() on the vmentry path too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: d28b387f
Link: http://lkml.kernel.org/r/20180222154318.20361-2-pbonzini@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b28676bb upstream.

Reported by syzkaller:

    pte_list_remove: ffff9714eb1f8078 0->BUG
    ------------[ cut here ]------------
    kernel BUG at arch/x86/kvm/mmu.c:1157!
    invalid opcode: 0000 [#1] SMP
    RIP: 0010:pte_list_remove+0x11b/0x120 [kvm]
    Call Trace:
     drop_spte+0x83/0xb0 [kvm]
     mmu_page_zap_pte+0xcc/0xe0 [kvm]
     kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm]
     kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm]
     kvm_arch_flush_shadow_all+0xe/0x10 [kvm]
     kvm_mmu_notifier_release+0x6c/0xa0 [kvm]
     ? kvm_mmu_notifier_release+0x5/0xa0 [kvm]
     __mmu_notifier_release+0x79/0x110
     ? __mmu_notifier_release+0x5/0x110
     exit_mmap+0x15a/0x170
     ? do_exit+0x281/0xcb0
     mmput+0x66/0x160
     do_exit+0x2c9/0xcb0
     ? __context_tracking_exit.part.5+0x4a/0x150
     do_group_exit+0x50/0xd0
     SyS_exit_group+0x14/0x20
     do_syscall_64+0x73/0x1f0
     entry_SYSCALL64_slow_path+0x25/0x25

The reason is that when creates new memslot, there is no guarantee for new
memslot not overlap with private memslots. This can be triggered by the
following program:

   #include <fcntl.h>
   #include <pthread.h>
   #include <setjmp.h>
   #include <signal.h>
   #include <stddef.h>
   #include <stdint.h>
   #include <stdio.h>
   #include <stdlib.h>
   #include <string.h>
   #include <sys/ioctl.h>
   #include <sys/stat.h>
   #include <sys/syscall.h>
   #include <sys/types.h>
   #include <unistd.h>
   #include <linux/kvm.h>

   long r[16];

   int main()
   {
	void *p = valloc(0x4000);

	r[2] = open("/dev/kvm", 0);
	r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul);

	uint64_t addr = 0xf000;
	ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr);
	r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul);
	ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul);
	ioctl(r[6], KVM_RUN, 0);
	ioctl(r[6], KVM_RUN, 0);

	struct kvm_userspace_memory_region mr = {
		.slot = 0,
		.flags = KVM_MEM_LOG_DIRTY_PAGES,
		.guest_phys_addr = 0xf000,
		.memory_size = 0x4000,
		.userspace_addr = (uintptr_t) p
	};
	ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr);
	return 0;
   }

This patch fixes the bug by not adding a new memslot even if it
overlaps with private memslots.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>

commit 67870eb1 upstream.

In banked-sr.c, we use a top-level '__asm__(".arch_extension virt")'
statement to allow compilation of a multi-CPU kernel for ARMv6
and older ARMv7-A that don't normally support access to the banked
registers.

This is considered to be a programming error by the gcc developers
and will no longer work in gcc-8, where we now get a build error:

/tmp/cc4Qy7GR.s:34: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_usr'
/tmp/cc4Qy7GR.s:41: Error: Banked registers are not available with this architecture. -- `mrs r3,ELR_hyp'
/tmp/cc4Qy7GR.s:55: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_svc'
/tmp/cc4Qy7GR.s:62: Error: Banked registers are not available with this architecture. -- `mrs r3,LR_svc'
/tmp/cc4Qy7GR.s:69: Error: Banked registers are not available with this architecture. -- `mrs r3,SPSR_svc'
/tmp/cc4Qy7GR.s:76: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_abt'

Passign the '-march-armv7ve' flag to gcc works, and is ok here, because
we know the functions won't ever be called on pre-ARMv7VE machines.
Unfortunately, older compiler versions (4.8 and earlier) do not understand
that flag, so we still need to keep the asm around.

Backporting to stable kernels (4.6+) is needed to allow those to be built
with future compilers as well.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84129
Fixes: 33280b4c ("ARM: KVM: Add banked registers save/restore")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8aa36a8d upstream.

The MACH_ARMADA_375 and MACH_ARMADA_38X boards select ARM_ERRATA_753970,
but it was renamed to PL310_ERRATA_753970 by commit fa0ce403 ("ARM:
7162/1: errata: tidy up Kconfig options for PL310 errata workarounds").

Fix the selects to use the new name.

Discovered with the
https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py
script.
Fixes: fa0ce403 ("ARM: 7162/1: errata: tidy up Kconfig options for
PL310 errata workarounds"
cc: stable@vger.kernel.org
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b98c6a16 upstream.

The last expression in a statement expression need not be a bare
variable, quoting gcc docs

  The last thing in the compound statement should be an expression
  followed by a semicolon; the value of this subexpression serves as the
  value of the entire construct.

and we already use that in e.g. the min/max macros which end with a
ternary expression.

This way, we can allow index to have const-qualified type, which will in
some cases avoid the need for introducing a local copy of index of
non-const qualified type. That, in turn, can prevent readers not
familiar with the internals of array_index_nospec from wondering about
the seemingly redundant extra variable, and I think that's worthwhile
considering how confusing the whole _nospec business is.

The expression _i&_mask has type unsigned long (since that is the type
of _mask, and the BUILD_BUG_ONs guarantee that _i will get promoted to
that), so in order not to change the type of the whole expression, add
a cast back to typeof(_i).
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/151881604837.17395.10812767547837568328.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b9c97c67 upstream.

If m88d3103 chip ID is not recognized, the device is not initialized.

However, it returns from probe without any error, causing this OOPS:

[    7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[    7.689297] pgd = 7b0bd7a7
[    7.689302] [00000000] *pgd=00000000
[    7.689318] Internal error: Oops: 80000005 [#1] SMP ARM
[    7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media
[    7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23
[    7.689361] Hardware name: BCM2835
[    7.689367] PC is at 0x0
[    7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103]
[    7.689386] pc : [<00000000>]    lr : [<bf0ae1ec>]    psr: 60000013
[    7.689391] sp : ed8e5c20  ip : ed8c1e00  fp : ed8945c0
[    7.689395] r10: ed894000  r9 : ed894378  r8 : eda736c0
[    7.689400] r7 : ed894070  r6 : ed8e5c44  r5 : bf0bb040  r4 : eda77600
[    7.689405] r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : eda77600
[    7.689412] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[    7.689417] Control: 10c5383d  Table: 2d8e806a  DAC: 00000051
[    7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63)
[    7.689428] Stack: (0xed8e5c20 to 0xed8e6000)
[    7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10
[    7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000
[    7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000
[    7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434
[    7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0
[    7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000
[    7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8
[    7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600
[    7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000
[    7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4
[    7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc
[    7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4
[    7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000
[    7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000
[    7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0
[    7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24
[    7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0
[    7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684
[    7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000
[    7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000
[    7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104
[    7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000
[    7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8
[    7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4
[    7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000
[    7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c
[    7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0
[    7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000
[    7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky])
[    7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2])
[    7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8)
[    7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4)
[    7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c)
[    7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c)
[    7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264)
[    7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4)
[    7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134)
[    7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168)
[    7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4)
[    7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8)
[    7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec)
[    7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54)
[    7.690018] Code: bad PC value

This may happen on normal circumstances, if, for some reason, the demod
hangs and start returning an invalid chip ID:

[   10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00

So, change the logic to cause probe to fail with -ENODEV, preventing
the OOPS.

Detected while testing DVB MMAP patches on Raspberry Pi 3 with
DVBSky S960CI.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 028091f8 upstream.

When the Intel Edison module is powered with 3.3V, the reboot command makes
the module stuck.  If the module is powered at a greater voltage, like 4.4V
(as the Edison Mini Breakout board does), reboot works OK.

The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the
SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel
is only sent when explicitely selected on the kernel command line.

Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent
of the power supply voltage.

[ tglx: Massaged changelog ]

Fixes: bda7b072 ("x86/platform/intel-mid: Implement power off sequence")
Signed-off-by: Sebastian Panceac <sebastian@resin.io>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1519810849-15131-1-git-send-email-sebastian@resin.ioSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 71c208dd upstream.

Older Xen versions (4.5 and before) might have problems migrating pv
guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before
suspending zero that MSR and restore it after being resumed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: https://lkml.kernel.org/r/20180226140818.4849-1-jgross@suse.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 230f5a89 upstream.

Gerd reports that ->i_mode may contain other bits besides S_IFCHR. Use
S_ISCHR() instead. Otherwise, get_user_pages_longterm() may fail on
device-dax instances when those are meant to be explicitly allowed.

Fixes: 2bb6d283 ("mm: introduce get_user_pages_longterm")
Cc: <stable@vger.kernel.org>
Reported-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Jane Chu <jane.chu@oracle.com>
Reported-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0373ca74 upstream.

commit a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()"
accidentally broke cpufreq on s3c2410 and s3c2412.

These two platforms don't have a CPU frequency table and used to skip
calling cpufreq_table_validate_and_show() for them.  But with the
above commit, we started calling it unconditionally and that will
eventually fail as the frequency table pointer is NULL.

Fix this by calling cpufreq_table_validate_and_show() conditionally
again.

Fixes: a307a1e6 "cpufreq: s3c: use cpufreq_generic_init()"
Cc: 3.13+ <stable@vger.kernel.org> # v3.13+
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0adb24e0 upstream.

The change to flush_kernel_vmap_range() wasn't sufficient to avoid the
SMP stalls.  The problem is some drivers call these routines with
interrupts disabled.  Interrupts need to be enabled for flush_tlb_all()
and flush_cache_all() to work.  This version adds checks to ensure
interrupts are not disabled before calling routines that need IPI
interrupts.  When interrupts are disabled, we now drop into slower code.

The attached change fixes the ordering of cache and TLB flushes in
several cases.  When we flush the cache using the existing PTE/TLB
entries, we need to flush the TLB after doing the cache flush.  We don't
need to do this when we flush the entire instruction and data caches as
these flushes don't use the existing TLB entries.  The same is true for
tmpalias region flushes.

The flush_kernel_vmap_range() and invalidate_kernel_vmap_range()
routines have been updated.

Secondly, we added a new purge_kernel_dcache_range_asm() routine to
pacache.S and use it in invalidate_kernel_vmap_range().  Nominally,
purges are faster than flushes as the cache lines don't have to be
written back to memory.

Hopefully, this is sufficient to resolve the remaining problems due to
cache speculation.  So far, testing indicates that this is the case.  I
did work up a patch using tmpalias flushes, but there is a performance
hit because we need the physical address for each page, and we also need
to sequence access to the tmpalias flush code.  This increases the
probability of stalls.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c52232a4 upstream.

On CPU hotunplug the enqueued timers of the unplugged CPU are migrated to a
live CPU. This happens from the control thread which initiated the unplug.

If the CPU on which the control thread runs came out from a longer idle
period then the base clock of that CPU might be stale because the control
thread runs prior to any event which forwards the clock.

In such a case the timers from the unplugged CPU are queued on the live CPU
based on the stale clock which can cause large delays due to increased
granularity of the outer timer wheels which are far away from base:;clock.

But there is a worse problem than that. The following sequence of events
illustrates it:

 - CPU0 timer1 is queued expires = 59969 and base->clk = 59131.

   The timer is queued at wheel level 2, with resulting expiry time = 60032
   (due to level granularity).

 - CPU1 enters idle @60007, with next timer expiry @60020.

 - CPU0 is hotplugged at @60009

 - CPU1 exits idle and runs the control thread which migrates the
   timers from CPU0

   timer1 is now queued in level 0 for immediate handling in the next
   softirq because the requested expiry time 59969 is before CPU1 base->clk
   60007

 - CPU1 runs code which forwards the base clock which succeeds because the
   next expiring timer. which was collected at idle entry time is still set
   to 60020.

   So it forwards beyond 60007 and therefore misses to expire the migrated
   timer1. That timer gets expired when the wheel wraps around again, which
   takes between 63 and 630ms depending on the HZ setting.

Address both problems by invoking forward_timer_base() for the control CPUs
timer base. All other places, which might run into a similar problem
(mod_timer()/add_timer_on()) already invoke forward_timer_base() to avoid
that.

[ tglx: Massaged comment and changelog ]

Fixes: a683f390 ("timers: Forward the wheel clock whenever possible")
Co-developed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Lingutla Chandrasekhar <clingutla@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180118115022.6368-1-clingutla@codeaurora.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 71db96dd upstream.

We've added a quirk to enable the recent Lenovo dock support, where it
overwrites the pin configs of NID 0x17 and 19, not only updating the
pin config cache.  It works right after the boot, but the problem is
that the pin configs are occasionally cleared when the machine goes to
PM.  Meanwhile the quirk writes the pin configs only at the pre-probe,
so this won't be applied any longer.

For addressing that issue, this patch moves the code to overwrite the
pin configs into HDA_FIXUP_ACT_INIT section so that it's always
applied at both probe and resume time.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161
Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ba8f9d3 upstream.

On some boards setting power_save to a non 0 value leads to clicking /
popping sounds when ever we enter/leave powersaving mode. Ideally we would
figure out how to avoid these sounds, but that is not always feasible.

This commit adds a blacklist for devices where powersaving is known to
cause problems and disables it on these devices.

Note I tried to put this blacklist in userspace first:
https://github.com/systemd/systemd/pull/8128

But the systemd maintainers rightfully pointed out that it would be
impossible to then later remove entries once we actually find a way to
make power-saving work on listed boards without issues. Having this list
in the kernel will allow removal of the blacklist entry in the same commit
which fixes the clicks / plops.

The blacklist only applies to the default power_save module-option value,
if a user explicitly sets the module-option then the blacklist is not
used.

[ added an ifdef CONFIG_PM for the build error -- tiwai]

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 240a8af9 upstream.

The capture interface doesn't work and the playback interface only
supports 48 kHz sampling rate even though it advertises more rates.
Signed-off-by: Erik Veijola <erik.veijola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee70bc1e upstream.

tpm_transmit() does not offer an explicit interface to indicate the number
of valid bytes in the communication buffer. Instead, it relies on the
commandSize field in the TPM header that is encoded within the buffer.
Therefore, ensure that a) enough data has been written to the buffer, so
that the commandSize field is present and b) the commandSize field does not
announce more data than has been written to the buffer.

This should have been fixed with CVE-2011-1161 long ago, but apparently
a correct version of that patch never made it into the kernel.

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6b3a1317 upstream.

The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe.
This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes
and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe
buffer and copy the data to/from it.

The buffer needs to be allocated separately, to ensure that it is
cacheline-aligned and not shared with other data, so that DMA can work
correctly.

Fixes: 0edbfea5 ("tpm/tpm_tis_spi: Add support for spi phy")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c37fbc09 upstream.

Making cmd_getticks 'const' introduced a couple of harmless warnings:

drivers/char/tpm/tpm_tis_core.c: In function 'probe_itpm':
drivers/char/tpm/tpm_tis_core.c:469:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:477:31: error: passing argument 2 of 'tpm_tis_send_data' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
  rc = tpm_tis_send_data(chip, cmd_getticks, len);
drivers/char/tpm/tpm_tis_core.c:255:12: note: expected 'u8 * {aka unsigned char *}' but argument is of type 'const u8 * {aka const unsigned char *}'
 static int tpm_tis_send_data(struct tpm_chip *chip, u8 *buf, size_t len)

This changes the related functions to all take 'const' pointers
so that gcc can see this as being correct. I had to slightly
modify the logic around tpm_tis_spi_transfer() for this to work
without introducing ugly casts.

Cc: stable@vger.kernel.org
Fixes: 5e35bd8e06b9 ("tpm_tis: make array cmd_getticks static const to shink object code size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>