- 08 May, 2024 2 commits
-
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_CRC_RES_* register macros. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/849315d4417a2ce60e867648d9a040c5e96bc22d.1714990089.git.jani.nikula@intel.comSigned-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_CRC_CTL register macro. Reviewed-by:
-
- 07 May, 2024 1 commit
-
-
Karthikeyan Ramasubramanian authored
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to backlight BDB data. Commit 70003456 ("drm/i915/bios: Define more BDB contents") updated the backlight BDB data accordingly. This broke the parsing of backlight BDB data in VBT for versions 236 - 238 (both inclusive) and hence the backlight controls are not responding on units with the concerned BDB version. backlight_control information has been present in backlight BDB data from at least BDB version 191 onwards, if not before. Hence this patch extracts the backlight_control information for BDB version 191 or newer. Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236). Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251). v2: removed checking the block size of the backlight BDB data [vsyrjala: this is completely safe thanks to commit e163cfb4 ("drm/i915/bios: Make copies of VBT data blocks")] Fixes: 70003456 ("drm/i915/bios: Define more BDB contents") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Karthikeyan Ramasubramanian <kramasub@chromium.org> Signed-off-by:
-
- 06 May, 2024 19 commits
-
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PORT_ALPM_LFPS_CTL register macro. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f8a3bbade94258852b8129c5f5918fb06ceab54b.1714471597.git.jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PORT_ALPM_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the ALPM_CTL2 register macro. Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/09acf2751cfd2f524e6ba97c3ac285495eae5c86.1714471597.git.jani.nikula@intel.comSigned-off-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the ALPM_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_SRCSZ_ERLY_TPT register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PSR2_MAN_TRK_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PSR2_SU_STATUS register macro. v2: Expand from _PSR2_SU_STATUS to PSR2_SU_STATUS (Rodrigo) Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR2_STATUS register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PSR_EVENT register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR2_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR_DEBUG register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR_PERF_CNT register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR_STATUS register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR_AUX_DATA register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR_AUX_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_PSR_IIR register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_PSR_IMR register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the EDP_PSR_CTL register macro. Reviewed-by:
-
Jani Nikula authored
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the TRANS_EXITLINE register macro. Reviewed-by:
-
- 03 May, 2024 18 commits
-
-
Balasubramani Vivekanandan authored
Enable the display support for Battlemage Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Reviewed-by:
Shekhar Chauhan <shekhar.chauhan@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Acked-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430172850.1881525-20-radhakrishna.sripada@intel.com
-
Matthew Auld authored
Perform manual transient cache flush prior to flip and at the end of frontbuffer_flush. This is needed to ensure display engine doesn't see garbage if the surface is L3:XD dirty. Testcase: igt@xe-pat@display-vs-wb-transient Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Nirmoy Das authored
Display surfaces can be tagged as transient by mapping it using one of the various L3:XD PAT index modes on Xe2. The expectation is that KMD needs to request transient data flush at the start of flip sequence to ensure all transient data in L3 cache is flushed to memory. Add a routine for this which we can then call from the display code. v2: rebase(RK) Signed-off-by:
-
Matthew Auld authored
Needed in an upcoming patch, where we want GT level print, but only which to trigger once to avoid flooding dmesg. Signed-off-by:
-
Balasubramani Vivekanandan authored
Max supported speed by xe2hpd is UHBR13.5. Limit the max DP source rate to it. Bspec: 67066 Signed-off-by:
-
Ankit Nautiyal authored
This reverts commit 562f3383. For BMG it seems that the VBT to DDI mapping does not follow DG1, and DG2, but follows ADLP mapping given in Bspec:20124. Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Matt Roper authored
Battlemage's south display is the same as Meteor Lake's, including the need to invert the HPD pins, which Lunar Lake does not need. Signed-off-by:
Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Signed-off-by:
-
José Roberto de Souza authored
No display IP beyond Xe_LPD+ has "BW credits" bits in MBUS_DBOX_CTL register. Restrict the programming only to Xe_LPD+. BSpec: 49213 CC: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Matt Roper authored
Unlike DG2, Xe2_HPD does support multiple GV points with different maximum memory bandwidths, but uses a much simpler algorithm than igpu platforms use. Bspec: 64631 CC: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add step 9 from initialize display sequence. v2: Commit subject improved Bpsec: 49189 Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Add initial display info for xe2hpd. It is similar to xelpdp, but with no PORT_B. v2: Inherit from XE_LPDP_FEATURES instead of XE_LPD_FEATURES Bspec: 67066 CC: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ravi Kumar Vodapalli authored
DP/eDP and HDMI pll values are updated for Xe2_HPD platform v2: Removed the unsupported mtl_c20_dp_uhbr20 from xehpd_c20_dp_tables Bspec: 74165 Signed-off-by:
Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com> Signed-off-by:
-
Balasubramani Vivekanandan authored
Tables for eDP PHY PLL configuration for different link rates added for Xe2_HPD. Previous platforms were using C10 PHY for eDP port whereas Xe2_HPD has C20 PHY. v2: Updated with a more appropriate Bspec number. Bspec: 74165 CC: Clint Taylor <Clinton.A.Taylor@intel.com> Signed-off-by:
-
Balasubramani Vivekanandan authored
Xe2_HPD has different offsets for C20 PHY SRAM configuration context location. Use the display version to select the right address. Note that Xe2_LPD uses the same C20 SRAM offsets used by Xe_LPDP (i.e. MTL's display). According to the BSpec, currently, only Xe2_HPD has different offsets, so make sure it is the only display using them in the driver. v2: * Redesigned how the right offsets are selected for different display IP versions. v3: Fix white space error(RK) Bspec: 67610 Cc: Clint Taylor <Clinton.A.Taylor@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
José Roberto de Souza authored
Xe2_HPD has a different value to power down port A. BSpec: 65450 Signed-off-by:
-
Radhakrishna Sripada authored
Discrete cards use the Port numbers TC1-4 for the offsets. The regular flow for type-c subsystem port initialization can be skipped. This check is present in DG2. Extend this to future discrete products. Signed-off-by:
-
Clint Taylor authored
Add Xe2_HPD specific CDCLK table and use MTL Funcs. Bspec: 65243 CC: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by:
-
Balasubramani Vivekanandan authored
Display code uses IS_BATTLEMAGE macro but the platform support doesn't exist in i915. So fake IS_BATTLEMAGE macro defined to enable building i915 code. We should make sure the macro parameter is used in the always-false expression so that we don't run into "unused variable" warnings from i915 builds if the IS_BATTLEMAGE() check is the only place the i915 pointer gets used in a function. While we're at it, also update the IS_LUNARLAKE macro to include the parameter in the false expression for consistency. Signed-off-by:
-
