Marvell Ethernet IP supports PHY negotiation driven by HW. This
fundamentally clashes with libphy (software) driven negotiation and
also cannot cope with quirky PHYs. Therefore, always disable any HW
negotiation features and properly use libphy's phy_device.
Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current libphy handling in pxa168_eth lacks proper phy_connect. Prepare
to fix this by first moving phy properties from platform_data to private
driver data.
Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PXA168 Ethernet IP support MII and RMII connection to its PHY.
Currently, pxa168 platform_data does not provide a way to pass that
and there is one user of pxa168 platform_data (mach-mmp/gplug).
Given the pinctrl settings of gplug it uses RMII, so add and pass
a corresponding phy_interface_t.
Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marvell 88E3016 is a FastEthernet PHY that also can be found in Marvell
Berlin SoCs as integrated PHY.
Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of commit e4dc601b ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of commit e4dc601b ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both image_data and typhoon_fw->data are const u8*, so the cast to u8*
is unnecessary and confusing.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_addr_is_valid() only appeared in its definition.
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Sébastien Barré <sebastien.barre@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Martin KaFai Lau says:

====================
ipv6: Reduce the number of fib6_lookup() calls from ip6_pol_route()

This patch set is trying to reduce the number of fib6_lookup()
calls from ip6_pol_route().

I have adapted davem's udpflooda and kbench_mod test
(https://git.kernel.org/pub/scm/linux/kernel/git/davem/net_test_tools.git) to
support IPv6 and here is the result:

Before:
[root]# for i in $(seq 1 3); do time ./udpflood -l 20000000 -c 250 2401:face:face:face::2; done

real    0m34.190s
user    0m3.047s
sys     0m31.108s

real    0m34.635s
user    0m3.125s
sys     0m31.475s

real    0m34.517s
user    0m3.034s
sys     0m31.449s

[root]# insmod ip6_route_kbench.ko oif=2 src=2401:face:face:face::1 dst=2401:face:face:face::2
[  660.160976] ip6_route_kbench: ip6_route_output tdiff: 933
[  660.207261] ip6_route_kbench: ip6_route_output tdiff: 988
[  660.253492] ip6_route_kbench: ip6_route_output tdiff: 896
[  660.298862] ip6_route_kbench: ip6_route_output tdiff: 898

After:
[root]# for i in $(seq 1 3); do time ./udpflood -l 20000000 -c 250 2401:face:face:face::2; done

real    0m32.695s
user    0m2.925s
sys     0m29.737s

real    0m32.636s
user    0m3.007s
sys     0m29.596s

real    0m32.797s
user    0m2.866s
sys     0m29.898s

[root]# insmod ip6_route_kbench.ko oif=2 src=2401:face:face:face::1 dst=2401:face:face:face::2
[  881.220793] ip6_route_kbench: ip6_route_output tdiff: 684
[  881.253477] ip6_route_kbench: ip6_route_output tdiff: 640
[  881.286867] ip6_route_kbench: ip6_route_output tdiff: 630
[  881.320749] ip6_route_kbench: ip6_route_output tdiff: 653

/****************************** udpflood.c ******************************/
/* It is an adaptation of the Eric Dumazet's and David Miller's
 * udpflood tool, by adding IPv6 support.
 */

typedef uint32_t u32;

static int debug =3D 0;

/* Allow -fstrict-aliasing */
typedef union sa_u {
	struct sockaddr_storage a46;
	struct sockaddr_in a4;
	struct sockaddr_in6 a6;
} sa_u;

static int usage(void)
{
	printf("usage: udpflood [ -l count ] [ -m message_size ] [ -c num_ip_addrs=
 ] IP_ADDRESS\n");
	return -1;
}

static u32 get_last32h(const sa_u *sa)
{
	if (sa->a46.ss_family =3D=3D PF_INET)
		return ntohl(sa->a4.sin_addr.s_addr);
	else
		return ntohl(sa->a6.sin6_addr.s6_addr32[3]);
}

static void set_last32h(sa_u *sa, u32 last32h)
{
	if (sa->a46.ss_family =3D=3D PF_INET)
		sa->a4.sin_addr.s_addr =3D htonl(last32h);
	else
		sa->a6.sin6_addr.s6_addr32[3] =3D htonl(last32h);
}

static void print_saddr(const sa_u *sa, const char *msg)
{
	char buf[64];

	if (!debug)
		return;

	switch (sa->a46.ss_family) {
	case PF_INET:
		inet_ntop(PF_INET, &(sa->a4.sin_addr.s_addr), buf,
			  sizeof(buf));
		break;
	case PF_INET6:
		inet_ntop(PF_INET6, &(sa->a6.sin6_addr), buf, sizeof(buf));
		break;
	}

	printf("%s: %s\n", msg, buf);
}

static int send_packets(const sa_u *sa, size_t num_addrs, int count, int ms=
g_sz)
{
	char *msg =3D malloc(msg_sz);
	sa_u saddr;
	u32 start_addr32h, end_addr32h, cur_addr32h;
	int fd, i, err;

	if (!msg)
		return -ENOMEM;

	memset(msg, 0, msg_sz);

	memcpy(&saddr, sa, sizeof(saddr));
	cur_addr32h =3D start_addr32h =3D get_last32h(&saddr);
	end_addr32h =3D start_addr32h + num_addrs;

	fd =3D socket(saddr.a46.ss_family, SOCK_DGRAM, 0);
	if (fd < 0) {
		perror("socket");
		err =3D fd;
		goto out_nofd;
	}

	/* connect to avoid the kernel spending time in figuring
	 * out the source address (i.e pin the src address)
	 */
	err =3D connect(fd, (struct sockaddr *) &saddr, sizeof(saddr));
	if (err < 0) {
		perror("connect");
		goto out;
	}

	print_saddr(&saddr, "start_addr");
	for (i =3D 0; i < count; i++) {
		print_saddr(&saddr, "sendto");
		err =3D sendto(fd, msg, msg_sz, 0, (struct sockaddr *)&saddr,
			     sizeof(saddr));
		if (err < 0) {
			perror("sendto");
			goto out;
		}

		if (++cur_addr32h >=3D end_addr32h)
			cur_addr32h =3D start_addr32h;
		set_last32h(&saddr, cur_addr32h);
	}

	err =3D 0;
out:
	close(fd);
out_nofd:
	free(msg);
	return err;
}

int main(int argc, char **argv, char **envp)
{
	int port, msg_sz, count, num_addrs, ret;

	sa_u start_addr;

	port =3D 6000;
	msg_sz =3D 32;
	count =3D 10000000;
	num_addrs =3D 1;

	while ((ret =3D getopt(argc, argv, "dl:s:p:c:")) >=3D 0) {
		switch (ret) {
		case 'l':
			sscanf(optarg, "%d", &count);
			break;
		case 's':
			sscanf(optarg, "%d", &msg_sz);
			break;
		case 'p':
			sscanf(optarg, "%d", &port);
			break;
		case 'c':
			sscanf(optarg, "%d", &num_addrs);
			break;
		case 'd':
			debug =3D 1;
			break;
		case '?':
			return usage();
		}
	}

	if (num_addrs < 1)
		return usage();

	if (!argv[optind])
		return usage();

	start_addr.a4.sin_port =3D htons(port);
	if (inet_pton(PF_INET, argv[optind], &start_addr.a4.sin_addr))
		start_addr.a46.ss_family =3D PF_INET;
	else if (inet_pton(PF_INET6, argv[optind], &start_addr.a6.sin6_addr.s6_add=
r))
		start_addr.a46.ss_family =3D PF_INET6;
	else
		return usage();

	return send_packets(&start_addr, num_addrs, count, msg_sz);
}

/****************** ip6_route_kbench_mod.c ******************/

/* We can't just use "get_cycles()" as on some platforms, such
 * as sparc64, that gives system cycles rather than cpu clock
 * cycles.
 */

static inline unsigned long long get_tick(void)
{
	unsigned long long t;

	__asm__ __volatile__("rd %%tick, %0" : "=r" (t));
	return t;
}
static inline unsigned long long get_tick(void)
{
	unsigned long long t;

	rdtscll(t);

	return t;
}
static inline unsigned long long get_tick(void)
{
	return get_cycles();
}

static int flow_oif = DEFAULT_OIF;
static int flow_iif = DEFAULT_IIF;
static u32 flow_mark = DEFAULT_MARK;
static struct in6_addr flow_dst_ip_addr;
static struct in6_addr flow_src_ip_addr;
static int flow_tos = DEFAULT_TOS;

static char dst_string[64];
static char src_string[64];

module_param_string(dst, dst_string, sizeof(dst_string), 0);
module_param_string(src, src_string, sizeof(src_string), 0);

static int __init flow_setup(void)
{
	if (dst_string[0] &&
	    !in6_pton(dst_string, -1, &flow_dst_ip_addr.s6_addr[0], -1, NULL)) {
		pr_info("cannot parse \"%s\"\n", dst_string);
		return -1;
	}

	if (src_string[0] &&
	    !in6_pton(src_string, -1, &flow_src_ip_addr.s6_addr[0], -1, NULL)) {
		pr_info("cannot parse \"%s\"\n", dst_string);
		return -1;
	}

	return 0;
}

module_param_named(oif, flow_oif, int, 0);
module_param_named(iif, flow_iif, int, 0);
module_param_named(mark, flow_mark, uint, 0);
module_param_named(tos, flow_tos, int, 0);

static int warmup_count = DEFAULT_WARMUP_COUNT;
module_param_named(count, warmup_count, int, 0);

static void flow_init(struct flowi6 *fl6)
{
	memset(fl6, 0, sizeof(*fl6));
	fl6->flowi6_proto = IPPROTO_ICMPV6;
	fl6->flowi6_oif = flow_oif;
	fl6->flowi6_iif = flow_iif;
	fl6->flowi6_mark = flow_mark;
	fl6->flowi6_tos = flow_tos;
	fl6->daddr = flow_dst_ip_addr;
	fl6->saddr = flow_src_ip_addr;
}

static struct sk_buff * fake_skb_get(void)
{
	struct ipv6hdr *hdr;
	struct sk_buff *skb;

	skb = alloc_skb(4096, GFP_KERNEL);
	if (!skb) {
		pr_info("Cannot alloc SKB for test\n");
		return NULL;
	}
	skb->dev = __dev_get_by_index(&init_net, flow_iif);
	if (skb->dev == NULL) {
		pr_info("Input device (%d) does not exist\n", flow_iif);
		goto err;
	}

	skb_reset_mac_header(skb);
	skb_reset_network_header(skb);
	skb_reserve(skb, MAX_HEADER + sizeof(struct ipv6hdr));
	hdr = ipv6_hdr(skb);

	hdr->priority = 0;
	hdr->version = 6;
	memset(hdr->flow_lbl, 0, sizeof(hdr->flow_lbl));
	hdr->payload_len = htons(sizeof(struct icmp6hdr));
	hdr->nexthdr = IPPROTO_ICMPV6;
	hdr->saddr = flow_src_ip_addr;
	hdr->daddr = flow_dst_ip_addr;
	skb->protocol = htons(ETH_P_IPV6);
	skb->mark = flow_mark;

	return skb;
err:
	kfree_skb(skb);
	return NULL;
}

static void do_full_output_lookup_bench(void)
{
	unsigned long long t1, t2, tdiff;
	struct rt6_info *rt;
	struct flowi6 fl6;
	int i;

	rt = NULL;

	for (i = 0; i < warmup_count; i++) {
		flow_init(&fl6);

		rt = (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl6);
		if (IS_ERR(rt))
			break;
		ip6_rt_put(rt);
	}
	if (IS_ERR(rt)) {
		pr_info("ip_route_output_key: err=%ld\n", PTR_ERR(rt));
		return;
	}

	flow_init(&fl6);

	t1 = get_tick();
	rt = (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl6);
	t2 = get_tick();
	if (!IS_ERR(rt))
		ip6_rt_put(rt);

	tdiff = t2 - t1;
	pr_info("ip6_route_output tdiff: %llu\n", tdiff);
}

static void do_full_input_lookup_bench(void)
{
	unsigned long long t1, t2, tdiff;
	struct sk_buff *skb;
	struct rt6_info *rt;
	int err, i;

	skb = fake_skb_get();
	if (skb == NULL)
		goto out_free;

	err = 0;
	local_bh_disable();
	for (i = 0; i < warmup_count; i++) {
		ip6_route_input(skb);
		rt = (struct rt6_info *)skb_dst(skb);
		err = (!rt || rt == init_net.ipv6.ip6_null_entry);
		skb_dst_drop(skb);
		if (err)
			break;
	}
	local_bh_enable();

	if (err) {
		pr_info("Input route lookup fails\n");
		goto out_free;
	}

	local_bh_disable();
	t1 = get_tick();
	ip6_route_input(skb);
	t2 = get_tick();
	local_bh_enable();

	rt = (struct rt6_info *)skb_dst(skb);
	err = (!rt || rt == init_net.ipv6.ip6_null_entry);
	skb_dst_drop(skb);
	if (err) {
		pr_info("Input route lookup fails\n");
		goto out_free;
	}

	tdiff = t2 - t1;
	pr_info("ip6_route_input tdiff: %llu\n", tdiff);

out_free:
	kfree_skb(skb);
}

static void do_full_lookup_bench(void)
{
	if (!flow_iif)
		do_full_output_lookup_bench();
	else
		do_full_input_lookup_bench();
}

static void do_bench(void)
{
	do_full_lookup_bench();
	do_full_lookup_bench();
	do_full_lookup_bench();
	do_full_lookup_bench();
}

static int __init kbench_init(void)
{
	if (flow_setup())
		return -EINVAL;

	pr_info("flow [IIF(%d),OIF(%d),MARK(0x%08x),D("IP6_FMT"),"
		"S("IP6_FMT"),TOS(0x%02x)]\n",
		flow_iif, flow_oif, flow_mark,
		IP6_PRT(flow_dst_ip_addr),
		IP6_PRT(flow_src_ip_addr),
		flow_tos);

	if (!cpu_has_tsc) {
		pr_err("X86 TSC is required, but is unavailable.\n");
		return -EINVAL;
	}

	pr_info("sizeof(struct rt6_info)==%zu\n", sizeof(struct rt6_info));

	do_bench();

	return -ENODEV;
}

static void __exit kbench_exit(void)
{
}

module_init(kbench_init);
module_exit(kbench_exit);
MODULE_LICENSE("GPL");
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch save the fn before doing rt6_backtrack.
Hence, without redo-ing the fib6_lookup(), saved_fn can be used
to redo rt6_select() with RT6_LOOKUP_F_REACHABLE off.

Some minor changes I think make sense to review as a single patch:
* Remove the 'out:' goto label.
* Remove the 'reachable' variable. Only use the 'strict' variable instead.

After this patch, "failing ip6_ins_rt()" should be the only case that
requires a redo of fib6_lookup().

Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When there is a RTF_CACHE hit, no need to redo fib6_lookup()
with reachable=0.

Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is the prep work to reduce the number of calls to fib6_lookup().

The BACKTRACK macro could be hard-to-read and error-prone due to
its side effects (mainly goto).

This patch is to:
1. Replace BACKTRACK macro with a function (fib6_backtrack) with the following
   return values:
   * If it is backtrack-able, returns next fn for retry.
   * If it reaches the root, returns NULL.
2. The caller needs to decide if a backtrack is needed (by testing
   rt == net->ipv6.ip6_null_entry).
3. Rename the goto labels in ip6_pol_route() to make the next few
   patches easier to read.

Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove trailing whitespace in tcp.h icmp.c syncookies.c
Signed-off-by: Kenjiro Nakayama <nakayamakenjiro@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

total_data_buflen is used by netvsc_send() to decide if a packet can be put
into send buffer. It should also include the size of RNDIS message before the
Ethernet frame. Otherwise, a messge with total size bigger than send_section_size
may be copied into the send buffer, and cause data corruption.

[Request to include this patch to the Stable branches]
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver fixes 2014-10-22

The following series of patches includes fixes to the driver.

- Properly handle feature changes via ethtool by using correctly sized
  variables
- Perform proper napi packet counting and budget checking

This patch series is based on net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the amd-xgbe driver increments the packets processed counter
each time a descriptor is processed.  Since a packet can be represented
by more than one descriptor incrementing the counter in this way is not
appropriate.  Also, since multiple descriptors cause the budget check
to be short circuited, sometimes the returned value from the poll
function would be larger than the budget value resulting in a WARN_ONCE
being triggered.

Update the polling logic to properly account for the number of packets
processed and exit when the budget value is reached.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ndo_set_features callback function was improperly using an unsigned
int to save the current feature value for features such as NETIF_F_RXCSUM.
Since that feature is in the upper 32 bits of a 64 bit variable the
result was always 0 making it not possible to actually turn off the
hardware RX checksum support.  Change the unsigned int type to the
netdev_features_t type in order to properly capture the current value
and perform the proper operation.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 278d2404 (net: fec: ptp: Enable PPS output based on ptp clock)
fec_enet_interrupt calls fec_ptp_check_pps_event unconditionally, which calls
into ptp_clock_event. If fep->ptp_clock is NULL, ptp_clock_event tries to
dereference the NULL pointer.
Since on i.MX53 fep->bufdesc_ex is not set, fec_ptp_init is never called,
and fep->ptp_clock is NULL, which reliably causes a kernel panic.

This patch adds a check for fep->ptp_clock == NULL in fec_enet_interrupt.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit "net: Save TX flow hash in sock and set in skbuf on xmit"
introduced the inet_set_txhash() and ip6_set_txhash() routines to calculate
and record flow hash(sk_txhash) in the socket structure. sk_txhash is used
to set skb->hash which is used to spread flows across multiple TXQs.

But, the above routines are invoked before the source port of the connection
is created. Because of this all outgoing connections that just differ in the
source port get hashed into the same TXQ.

This patch fixes this problem for IPv4/6 by invoking the the above routines
after the source port is available for the socket.

Fixes: b73c3d0e("net: Save TX flow hash in sock and set in skbuf on xmit")
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pskb_may_pull() maybe change skb->data and make nh and exthdr pointer
oboslete, so recompute the nd and exthdr
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After interface restart (eg: after link disconnection/reconnection), the bridge
function doesn't work anymore. This is due to the promiscuous mode being cleared
by the restart.

The mac-fcc already includes code to set the promiscuous mode back during the restart.
This patch adds the same handling to mac-fec and mac-scc.

Tested with bridge function on MPC885 with FEC.
Reported-by: Germain Montoies <germain.montoies@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

The crafted header start address is from a driver supplied buffer, which
one can reasonably expect to be aligned on a 4-bytes boundary.
However ATM the TSO helper API is only used by ethernet drivers and
the tcp header will then be aligned to a 2-bytes only boundary from the
header start address.
Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

write_count and insert_count can wrap around, making > check invalid.

Fixes: 70b33fb0 ("sfc: add support for
 skb->xmit_more").
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use netdev_alloc_pcpu_stats to allocate percpu stats and initialize syncp.

Fixes: 22e0f8b9 "net: sched: make bstats per cpu and estimator RCU safe"
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

while comparing for verifier state equivalency the comparison
was missing a check for uninitialized register.
Make sure it does so and add a testcase.

Fixes: f1bca824 ("bpf: add search pruning optimization to verifier")
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The synchronize_rcu() in netlink_release() introduces unacceptable
latency. Reintroduce minimal lookup so we can drop the
synchronize_rcu() until socket destruction has been RCUfied.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running tipcTC&tipcTS test suite, below lockdep unsafe locking
scenario is reported:

[ 1109.997854]
[ 1109.997988] =================================
[ 1109.998290] [ INFO: inconsistent lock state ]
[ 1109.998575] 3.17.0-rc1+ #113 Not tainted
[ 1109.998762] ---------------------------------
[ 1109.998762] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 1109.998762] swapper/7/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[ 1109.998762]  (slock-AF_TIPC){+.?...}, at: [<ffffffffa0011969>] tipc_sk_rcv+0x49/0x2b0 [tipc]
[ 1109.998762] {SOFTIRQ-ON-W} state was registered at:
[ 1109.998762]   [<ffffffff810a4770>] __lock_acquire+0x6a0/0x1d80
[ 1109.998762]   [<ffffffff810a6555>] lock_acquire+0x95/0x1e0
[ 1109.998762]   [<ffffffff81a2d1ce>] _raw_spin_lock+0x3e/0x80
[ 1109.998762]   [<ffffffffa0011969>] tipc_sk_rcv+0x49/0x2b0 [tipc]
[ 1109.998762]   [<ffffffffa0004fe8>] tipc_link_xmit+0xa8/0xc0 [tipc]
[ 1109.998762]   [<ffffffffa000ec6f>] tipc_sendmsg+0x15f/0x550 [tipc]
[ 1109.998762]   [<ffffffffa000f165>] tipc_connect+0x105/0x140 [tipc]
[ 1109.998762]   [<ffffffff817676ee>] SYSC_connect+0xae/0xc0
[ 1109.998762]   [<ffffffff81767b7e>] SyS_connect+0xe/0x10
[ 1109.998762]   [<ffffffff817a9788>] compat_SyS_socketcall+0xb8/0x200
[ 1109.998762]   [<ffffffff81a306e5>] sysenter_dispatch+0x7/0x1f
[ 1109.998762] irq event stamp: 241060
[ 1109.998762] hardirqs last  enabled at (241060): [<ffffffff8105a4ad>] __local_bh_enable_ip+0x6d/0xd0
[ 1109.998762] hardirqs last disabled at (241059): [<ffffffff8105a46f>] __local_bh_enable_ip+0x2f/0xd0
[ 1109.998762] softirqs last  enabled at (241020): [<ffffffff81059a52>] _local_bh_enable+0x22/0x50
[ 1109.998762] softirqs last disabled at (241021): [<ffffffff8105a626>] irq_exit+0x96/0xc0
[ 1109.998762]
[ 1109.998762] other info that might help us debug this:
[ 1109.998762]  Possible unsafe locking scenario:
[ 1109.998762]
[ 1109.998762]        CPU0
[ 1109.998762]        ----
[ 1109.998762]   lock(slock-AF_TIPC);
[ 1109.998762]   <Interrupt>
[ 1109.998762]     lock(slock-AF_TIPC);
[ 1109.998762]
[ 1109.998762]  *** DEADLOCK ***
[ 1109.998762]
[ 1109.998762] 2 locks held by swapper/7/0:
[ 1109.998762]  #0:  (rcu_read_lock){......}, at: [<ffffffff81782dc9>] __netif_receive_skb_core+0x69/0xb70
[ 1109.998762]  #1:  (rcu_read_lock){......}, at: [<ffffffffa0001c90>] tipc_l2_rcv_msg+0x40/0x260 [tipc]
[ 1109.998762]
[ 1109.998762] stack backtrace:
[ 1109.998762] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.17.0-rc1+ #113
[ 1109.998762] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[ 1109.998762]  ffffffff82745830 ffff880016c03828 ffffffff81a209eb 0000000000000007
[ 1109.998762]  ffff880017b3cac0 ffff880016c03888 ffffffff81a1c5ef 0000000000000001
[ 1109.998762]  ffff880000000001 ffff880000000000 ffffffff81012d4f 0000000000000000
[ 1109.998762] Call Trace:
[ 1109.998762]  <IRQ>  [<ffffffff81a209eb>] dump_stack+0x4e/0x68
[ 1109.998762]  [<ffffffff81a1c5ef>] print_usage_bug+0x1f1/0x202
[ 1109.998762]  [<ffffffff81012d4f>] ? save_stack_trace+0x2f/0x50
[ 1109.998762]  [<ffffffff810a406c>] mark_lock+0x28c/0x2f0
[ 1109.998762]  [<ffffffff810a3440>] ? print_irq_inversion_bug.part.46+0x1f0/0x1f0
[ 1109.998762]  [<ffffffff810a467d>] __lock_acquire+0x5ad/0x1d80
[ 1109.998762]  [<ffffffff810a70dd>] ? trace_hardirqs_on+0xd/0x10
[ 1109.998762]  [<ffffffff8108ace8>] ? sched_clock_cpu+0x98/0xc0
[ 1109.998762]  [<ffffffff8108ad2b>] ? local_clock+0x1b/0x30
[ 1109.998762]  [<ffffffff810a10dc>] ? lock_release_holdtime.part.29+0x1c/0x1a0
[ 1109.998762]  [<ffffffff8108aa05>] ? sched_clock_local+0x25/0x90
[ 1109.998762]  [<ffffffffa000dec0>] ? tipc_sk_get+0x60/0x80 [tipc]
[ 1109.998762]  [<ffffffff810a6555>] lock_acquire+0x95/0x1e0
[ 1109.998762]  [<ffffffffa0011969>] ? tipc_sk_rcv+0x49/0x2b0 [tipc]
[ 1109.998762]  [<ffffffff810a6fb6>] ? trace_hardirqs_on_caller+0xa6/0x1c0
[ 1109.998762]  [<ffffffff81a2d1ce>] _raw_spin_lock+0x3e/0x80
[ 1109.998762]  [<ffffffffa0011969>] ? tipc_sk_rcv+0x49/0x2b0 [tipc]
[ 1109.998762]  [<ffffffffa000dec0>] ? tipc_sk_get+0x60/0x80 [tipc]
[ 1109.998762]  [<ffffffffa0011969>] tipc_sk_rcv+0x49/0x2b0 [tipc]
[ 1109.998762]  [<ffffffffa00076bd>] tipc_rcv+0x5ed/0x960 [tipc]
[ 1109.998762]  [<ffffffffa0001d1c>] tipc_l2_rcv_msg+0xcc/0x260 [tipc]
[ 1109.998762]  [<ffffffffa0001c90>] ? tipc_l2_rcv_msg+0x40/0x260 [tipc]
[ 1109.998762]  [<ffffffff81783345>] __netif_receive_skb_core+0x5e5/0xb70
[ 1109.998762]  [<ffffffff81782dc9>] ? __netif_receive_skb_core+0x69/0xb70
[ 1109.998762]  [<ffffffff81784eb9>] ? dev_gro_receive+0x259/0x4e0
[ 1109.998762]  [<ffffffff817838f6>] __netif_receive_skb+0x26/0x70
[ 1109.998762]  [<ffffffff81783acd>] netif_receive_skb_internal+0x2d/0x1f0
[ 1109.998762]  [<ffffffff81785518>] napi_gro_receive+0xd8/0x240
[ 1109.998762]  [<ffffffff815bf854>] e1000_clean_rx_irq+0x2c4/0x530
[ 1109.998762]  [<ffffffff815c1a46>] e1000_clean+0x266/0x9c0
[ 1109.998762]  [<ffffffff8108ad2b>] ? local_clock+0x1b/0x30
[ 1109.998762]  [<ffffffff8108aa05>] ? sched_clock_local+0x25/0x90
[ 1109.998762]  [<ffffffff817842b1>] net_rx_action+0x141/0x310
[ 1109.998762]  [<ffffffff810bd710>] ? handle_fasteoi_irq+0xe0/0x150
[ 1109.998762]  [<ffffffff81059fa6>] __do_softirq+0x116/0x4d0
[ 1109.998762]  [<ffffffff8105a626>] irq_exit+0x96/0xc0
[ 1109.998762]  [<ffffffff81a30d07>] do_IRQ+0x67/0x110
[ 1109.998762]  [<ffffffff81a2ee2f>] common_interrupt+0x6f/0x6f
[ 1109.998762]  <EOI>  [<ffffffff8100d2b7>] ? default_idle+0x37/0x250
[ 1109.998762]  [<ffffffff8100d2b5>] ? default_idle+0x35/0x250
[ 1109.998762]  [<ffffffff8100dd1f>] arch_cpu_idle+0xf/0x20
[ 1109.998762]  [<ffffffff810999fd>] cpu_startup_entry+0x27d/0x4d0
[ 1109.998762]  [<ffffffff81034c78>] start_secondary+0x188/0x1f0

When intra-node messages are delivered from one process to another
process, tipc_link_xmit() doesn't disable BH before it directly calls
tipc_sk_rcv() on process context to forward messages to destination
socket. Meanwhile, if messages delivered by remote node arrive at the
node and their destinations are also the same socket, tipc_sk_rcv()
running on process context might be preempted by tipc_sk_rcv() running
BH context. As a result, the latter cannot obtain the socket lock as
the lock was obtained by the former, however, the former has no chance
to be run as the latter is owning the CPU now, so headlock happens. To
avoid it, BH should be always disabled in tipc_sk_rcv().
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Locking dependency detected below possible unsafe locking scenario:

           CPU0                          CPU1
T0:  tipc_named_rcv()                tipc_rcv()
T1:  [grab nametble write lock]*     [grab node lock]*
T2:  tipc_update_nametbl()           tipc_node_link_up()
T3:  tipc_nodesub_subscribe()        tipc_nametbl_publish()
T4:  [grab node lock]*               [grab nametble write lock]*

The opposite order of holding nametbl write lock and node lock on
above two different paths may result in a deadlock. If we move the
the updating of the name table after link state named out of node
lock, the reverse order of holding locks will be eliminated, and
as a result, the deadlock risk.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Govindarajulu Varadarajan says:

====================
enic: Bug fixes

This series fixes the following problem.

Please apply this to net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In enic_stop, we disable preemption using local_bh_disable(). We disable
preemption to wait for busy_poll to finish.

napi_disable should not be called here as it might sleep.

Moving napi_disable() call out side of local_bh_disable.

BUG: sleeping function called from invalid context at include/linux/netdevice.h:477
in_atomic(): 1, irqs_disabled(): 0, pid: 443, name: ifconfig
INFO: lockdep is turned off.
Preemption disabled at:[<ffffffffa029c5c4>] enic_rfs_flw_tbl_free+0x34/0xd0 [enic]

CPU: 31 PID: 443 Comm: ifconfig Not tainted 3.17.0-netnext-05504-g59f35b81 #268
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
 ffff8800dac10000 ffff88020b8dfcb8 ffffffff8148a57c 0000000000000000
 ffff88020b8dfcd0 ffffffff8107e253 ffff8800dac12a40 ffff88020b8dfd10
 ffffffffa029305b ffff88020b8dfd48 ffff8800dac10000 ffff88020b8dfd48
Call Trace:
 [<ffffffff8148a57c>] dump_stack+0x4e/0x7a
 [<ffffffff8107e253>] __might_sleep+0x123/0x1a0
 [<ffffffffa029305b>] enic_stop+0xdb/0x4d0 [enic]
 [<ffffffff8138ed7d>] __dev_close_many+0x9d/0xf0
 [<ffffffff8138ef81>] __dev_close+0x31/0x50
 [<ffffffff813974a8>] __dev_change_flags+0x98/0x160
 [<ffffffff81397594>] dev_change_flags+0x24/0x60
 [<ffffffff814085fd>] devinet_ioctl+0x63d/0x710
 [<ffffffff81139c16>] ? might_fault+0x56/0xc0
 [<ffffffff81409ef5>] inet_ioctl+0x65/0x90
 [<ffffffff813768e0>] sock_do_ioctl+0x20/0x50
 [<ffffffff81376ebb>] sock_ioctl+0x20b/0x2e0
 [<ffffffff81197250>] do_vfs_ioctl+0x2e0/0x500
 [<ffffffff81492619>] ? sysret_check+0x22/0x5d
 [<ffffffff81285f23>] ? __this_cpu_preempt_check+0x13/0x20
 [<ffffffff8109fe19>] ? trace_hardirqs_on_caller+0x119/0x270
 [<ffffffff811974ac>] SyS_ioctl+0x3c/0x80
 [<ffffffff814925ed>] system_call_fastpath+0x1a/0x1f
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following warning is shown when spinlock debug is enabled.

This occurs when enic_flow_may_expire timer function is running and
enic_stop is called on same CPU.

Fix this by using spink_lock_bh().

=================================
[ INFO: inconsistent lock state ]
3.17.0-netnext-05504-g59f35b81 #268 Not tainted
---------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
ifconfig/443 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (&(&enic->rfs_h.lock)->rlock){+.?...}, at:
enic_rfs_flw_tbl_free+0x34/0xd0 [enic]
{IN-SOFTIRQ-W} state was registered at:
  [<ffffffff810a25af>] __lock_acquire+0x83f/0x21c0
  [<ffffffff810a45f2>] lock_acquire+0xa2/0xd0
  [<ffffffff814913fc>] _raw_spin_lock+0x3c/0x80
  [<ffffffffa029c3d5>] enic_flow_may_expire+0x25/0x130[enic]
  [<ffffffff810bcd07>] call_timer_fn+0x77/0x100
  [<ffffffff810bd8e3>] run_timer_softirq+0x1e3/0x270
  [<ffffffff8105f9ae>] __do_softirq+0x14e/0x280
  [<ffffffff8105fdae>] irq_exit+0x8e/0xb0
  [<ffffffff8103da0f>] smp_apic_timer_interrupt+0x3f/0x50
  [<ffffffff81493742>] apic_timer_interrupt+0x72/0x80
  [<ffffffff81018143>] default_idle+0x13/0x20
  [<ffffffff81018a6a>] arch_cpu_idle+0xa/0x10
  [<ffffffff81097676>] cpu_startup_entry+0x2c6/0x330
  [<ffffffff8103b7ad>] start_secondary+0x21d/0x290
irq event stamp: 2997
hardirqs last  enabled at (2997): [<ffffffff81491865>] _raw_spin_unlock_irqrestore+0x65/0x90
hardirqs last disabled at (2996): [<ffffffff814915e6>] _raw_spin_lock_irqsave+0x26/0x90
softirqs last  enabled at (2968): [<ffffffff813b57a3>] dev_deactivate_many+0x213/0x260
softirqs last disabled at (2966): [<ffffffff813b5783>] dev_deactivate_many+0x1f3/0x260

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&enic->rfs_h.lock)->rlock);
  <Interrupt>
    lock(&(&enic->rfs_h.lock)->rlock);

 *** DEADLOCK ***
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
net: minor gso encapsulation fixes

The following series fixes a minor bug in the gso segmentation handlers
when encapsulation offload is used.

Theoretically this could cause kernel panic when the stack tries
to software-segment such a GRE offload packet, but it looks like there
is only one affected call site (tbf scheduler) and it handles NULL
return value.

I've included a followup patch to add IS_ERR_OR_NULL checks where needed.

While looking into this, I also found that size computation of the individual
segments is incorrect if skb->encapsulation is set.

Please see individual patches for delta vs. v1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

if ->encapsulation is set we have to use inner_tcp_hdrlen and add the
size of the inner network headers too.

This is 'mostly harmless'; tbf might send skb that is slightly over
quota or drop skb even if it would have fit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL.  This can happen when GSO is used for header verification.

However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.

Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.

However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.

It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_gso_segment() has a 'features' argument representing offload features
available to the output path.

A few handlers, e.g. GRE, instead re-fetch the features of skb->dev and use
those instead of the provided ones when handing encapsulation/tunnels.

Depending on dev->hw_enc_features of the output device skb_gso_segment() can
then return NULL even when the caller has disabled all GSO feature bits,
as segmentation of inner header thinks device will take care of segmentation.

This e.g. affects the tbf scheduler, which will silently drop GRE-encap GSO skbs
that did not fit the remaining token quota as the segmentation does not work
when device supports corresponding hw offload capabilities.

Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
netfilter fixes for net

The following patchset contains netfilter fixes for your net tree,
they are:

1) Fix missing MODULE_LICENSE() in the new nf_reject_ipv{4,6} modules.

2) Restrict nat and masq expressions to the nat chain type. Otherwise,
   users may crash their kernel if they attach a nat/masq rule to a non
   nat chain.

3) Fix hook validation in nft_compat when non-base chains are used.
   Basically, initialize hook_mask to zero.

4) Make sure you use match/targets in nft_compat from the right chain
   type. The existing validation relies on the table name which can be
   avoided by

5) Better netlink attribute validation in nft_nat. This expression has
   to reject the configuration when no address and proto configurations
   are specified.

6) Interpret NFTA_NAT_REG_*_MAX if only if NFTA_NAT_REG_*_MIN is set.
   Yet another sanity check to reject incorrect configurations from
   userspace.

7) Conditional NAT attribute dumping depending on the existing
   configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The following patch fixes a bug which causes the ax88179_178a driver to be
incapable of being added to a bond.

When I brought up the issue with the bonding maintainers, they indicated
that the real problem was with the NIC driver which must return zero for
success (of setting the MAC address). I see that several other NIC drivers
follow that pattern by either simply always returing zero, or by passing
through a negative (error) result while rewriting any positive return code
to zero. With that same philisophy applied to the ax88179_178a driver, it
allows it to work correctly with the bonding driver.

I believe this is suitable for queuing in -stable, as it's a small, simple,
and obvious fix that corrects a defect with no other known workaround.

This patch is against vanilla 3.17(.0).
Signed-off-by: Ian Morgan <imorgan@primordial.ca>

 drivers/net/usb/ax88179_178a.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ntb (non-transparent bridge) updates from Jon Mason:
 "Add support for Haswell NTB split BARs, a debugfs entry for basic
  debugging info, and some code clean-ups"

* tag 'ntb-3.18' of git://github.com/jonmason/ntb:
  ntb: Adding split BAR support for Haswell platforms
  ntb: use errata flag set via DID to implement workaround
  ntb: conslidate reading of PPD to move platform detection earlier
  ntb: move platform detection to separate function
  NTB: debugfs device entry

Pull i2c updates from Wolfram Sang:
 "Highlights from the I2C subsystem for 3.18:

   - new drivers for Axxia AM55xx, and Hisilicon hix5hd2 SoC.

   - designware driver gained AMD support, exynos gained exynos7 support

  The rest is usual driver stuff.  Hopefully no lowlights this time"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Add Device IDs for Intel Sunrise Point PCH
  i2c: hix5hd2: add i2c controller driver
  i2c-imx: Disable the clock on probe failure
  i2c: designware: Add support for AMD I2C controller
  i2c: designware: Rework probe() to get clock a bit later
  i2c: designware: Default to fast mode in case of ACPI
  i2c: axxia: Add I2C driver for AXM55xx
  i2c: exynos: add support for HSI2C module on Exynos7
  i2c: mxs: detect No Slave Ack on SELECT in PIO mode
  i2c: cros_ec: Remove EC_I2C_FLAG_10BIT
  i2c: cros-ec-tunnel: Add of match table
  i2c: rcar: remove sign-compare flaw
  i2c: ismt: Use minimum descriptor size
  i2c: imx: Add arbitration lost check
  i2c: rk3x: Remove unlikely() annotations
  i2c: rcar: check for no IRQ in rcar_i2c_irq()
  i2c: rcar: make rcar_i2c_prepare_msg() *void*
  i2c: rcar: simplify check for last message
  i2c: designware: add support of platform data to set I2C mode
  i2c: designware: add support of I2C standard mode

Pull sound fixes from Takashi Iwai:
 "Here are a collection of small fixes after 3.18 merge.

  The urgent one is the fix for kernel panics with linked PCM substream
  triggered by the recent nonatomic PCM ops support.  Other two fixes
  (emu10k1 and bebob) are stable fixes, and one easy PCI ID addition for
  a new Intel HD-audio controller"

* tag 'sound-fix-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda_intel: Add Device IDs for Intel Sunrise Point PCH
  ALSA: emu10k1: Fix deadlock in synth voice lookup
  ALSA: pcm: Fix referred substream in snd_pcm_action_group() unlock loop
  ALSA: bebob: Fix failure to detect source of clock for Terratec Phase 88