- 25 Sep, 2022 3 commits
-
-
Arthur Simchaev authored
Remove Query-Request API function declarations from include/ufs/ufshcd.h and move them to the ufs core private header. Link: https://lore.kernel.org/r/1663761485-2532-1-git-send-email-Arthur.Simchaev@wdc.comReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Arthur Simchaev <Arthur.Simchaev@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Lukas Bulwahn authored
SCSI_MOD is a helper config symbol for configuring RAID_ATTRS properly, i.e., RAID_ATTRS needs to be m when SCSI=m. This helper config symbol SCSI_MOD still shows up even in kernel configurations that do not select the block subsystem and where SCSI is not even a configuration option mentioned and selectable. Make this SCSI_MOD depend on BLOCK, so that it only shows up when it is slightly relevant in the kernel configuration. Link: https://lore.kernel.org/r/20220919060112.24802-1-lukas.bulwahn@gmail.comReviewed-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
-
Arun Easi authored
Fix this compilation error seen when CONFIG_TRACING is not enabled: drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_init': drivers/scsi/qla2xxx/qla_os.c:2854:25: error: implicit declaration of function 'trace_array_get_by_name'; did you mean 'trace_array_set_clr_event'? [-Werror=implicit-function-declaration] 2854 | qla_trc_array = trace_array_get_by_name("qla2xxx"); | ^~~~~~~~~~~~~~~~~~~~~~~ | trace_array_set_clr_event drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_uninit': drivers/scsi/qla2xxx/qla_os.c:2869:9: error: implicit declaration of function 'trace_array_put' [-Werror=implicit-function-declaration] 2869 | trace_array_put(qla_trc_array); | ^~~~~~~~~~~~~~~ Link: https://lore.kernel.org/r/20220907233308.4153-2-aeasi@marvell.comReported-by:kernel test robot <lkp@intel.com> Reviewed-by:
Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
- 16 Sep, 2022 24 commits
-
-
Martin Wilck authored
dev_loss_tmo is an unsigned value. Using "%d" as output format causes irritating negative values to be shown in sysfs. Link: https://lore.kernel.org/r/20220902131519.16513-1-mwilck@suse.comReviewed-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Martin Wilck <mwilck@suse.com> Signed-off-by:
-
Xuezhi Zhang authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Link: https://lore.kernel.org/r/20220901015130.419307-1-zhangxuezhi3@gmail.comReviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by:
Xuezhi Zhang <zhangxuezhi1@coolpad.com> Signed-off-by:
-
Xuezhi Zhang authored
Fix up sysfs show entries to use sysfs_emit() Link: https://lore.kernel.org/r/20220831140325.396295-1-zhangxuezhi3@gmail.comReviewed-by:
-
wangjianli authored
Delete the redundant word 'to'. Link: https://lore.kernel.org/r/20220908130910.35680-1-wangjianli@cdjrlc.comReviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
wangjianli <wangjianli@cdjrlc.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 14.2.0.7 Link: https://lore.kernel.org/r/20220911221505.117655-14-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
This patch fixes below Smatch reported issues: 1. lpfc_hbadisc.c:3020 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec() error: uninitialized symbol 'vlan_id'. 2. lpfc_hbadisc.c:3121 lpfc_mbx_cmpl_read_fcf_rec() error: uninitialized symbol 'vlan_id'. 3. lpfc_init.c:335 lpfc_dump_wakeup_param_cmpl() warn: always true condition '(prg->dist < 4) => (0-3 < 4)' 4. lpfc_init.c:2419 lpfc_parse_vpd() warn: inconsistent indenting. 5. lpfc_init.c:13248 lpfc_sli4_enable_msi() warn: 'phba->pcidev->irq' 2147483648 can't fit into 65535 'eqhdl->irq' 6. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get() error: uninitialized symbol 'ext_cnt' 7. lpfc_debugfs.c:5300 lpfc_idiag_extacc_avail_get() error: uninitialized symbol 'ext_size' 8. lpfc_vmid.c:248 lpfc_vmid_get_appid() warn: sleeping in atomic context. 9. lpfc_init.c:8342 lpfc_sli4_driver_resource_setup() warn: missing error code 'rc'. 10. lpfc_init.c:13573 lpfc_sli4_hba_unset() warn: variable dereferenced before check 'phba->pport' (see line 13546) 11. lpfc_auth.c:1923 lpfc_auth_handle_dhchap_reply() error: double free of 'hash_value' Fixes: 1. Initialize vlan_id to LPFC_FCOE_NULL_VID. 2. Initialize vlan_id to LPFC_FCOE_NULL_VID. 3. prg->dist is a 2 bit field. Its value can only be between 0-3. Remove redundent check 'if (prg->dist < 4)'. 4. Fix inconsistent indenting. Moved logic into helper function lpfc_fill_vpd(). 5. Define 'eqhdl->irq' as int value as pci_irq_vector() returns int. Also, check for return value of pci_irq_vector() and log message in case of failure. 6. Initialize 'ext_cnt' to 0. 7. Initialize 'ext_size' to 0. 8. Use alloc_percpu_gfp() with GFP_ATOMIC flag. 9. 'rc' was not updated when dma_pool_create() fails. Update 'rc = -ENOMEM' when dma_pool_create() fails before calling goto statement. 10. Add check for 'phba->pport' in lpfc_cpuhp_remove(). 11. Initialize 'hash_value' to NULL, same like 'aug_chal' variable. Link: https://lore.kernel.org/r/20220911221505.117655-13-jsmart2021@gmail.comCo-developed-by: -
James Smart authored
Firmware reports link degrade signaling via ACQES. Handlers and new additions to the SET_FEATURES mbox command are implemented so that link degrade parameters for 64GB capable links are reported through EDC ELS frames. Link: https://lore.kernel.org/r/20220911221505.117655-12-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Removed the lpfc_fdmi_attr_entry and lpfc_fdmi_attr_def structures that had a union causing unintentional zero padding, which required the usage of __packed. They are replaced with explicit lpfc_fdmi_attr_u32, lpfc_fdmi_attr_wwn, lpfc_fdmi_attr_fc4types, and lpfc_fdmi_attr_string structure defines instead of living in a union. This rids of ambiguous compiler zero padding, and entailed cleaning up bitwise endian declarations. As such, all FDMI attribute registration routines are replaced with generic void *arg and handlers for each of the newly defined attribute structure types. Link: https://lore.kernel.org/r/20220911221505.117655-11-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Switch case logics are reworked so they appear more similar and consistent. This eliminates compiler errors indicating unaligned pointer values and packed members. Added comments to explain previous size offset accumulations. Link: https://lore.kernel.org/r/20220911221505.117655-10-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Clarify naming of the mp/bmp dma buffers: - Rename mp to rq as it is the request buffer - Rename bmp to rsp as it is the response buffer This reduces confusion about what the buffer content is based on their name. Link: https://lore.kernel.org/r/20220911221505.117655-9-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
If there is a congestion or automated congestion response mode change, then log the reported change to kmsg. Link: https://lore.kernel.org/r/20220911221505.117655-8-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
On a PCI hotplug capable system, it is possible for scsi_device_put() to happen after lpfc_pci_remove_one() is called. As a result, the sdev->host->hostt->module dereference is for a previously freed memory location because the phba structure containing the hostt template was already freed when lpfc_pci_remove_one() returned. Since the lpfc module is still loaded during power slot disable, all scsi_host_templates should be declared as part of the global data segment instead of inside the heap allocated phba structure. This way the sdev->host->hostt memory area is always valid as long as the module is loaded regardless if PCI hotplug dynamically allocates or frees phba structures. Move all scsi_host_templates in the phba structure to global variables. Create a small helper routine to determine appropriate sg_tablesize during shost allocation. Link: https://lore.kernel.org/r/20220911221505.117655-7-jsmart2021@gmail.comCo-developed-by:
Dwip N. Banerjee <dnbanerg@us.ibm.com> Signed-off-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
James Smart authored
When a target makes the mistake of registering a FC4 type with the fabric, but then rejects a PRLI of that type, the lpfc driver incorrectly retries the PRLI causing multiple registrations with the transport. The driver needs to detect the reject reason data and stop any retry. Rework the PRLI reject scenarios. Link: https://lore.kernel.org/r/20220911221505.117655-6-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
Sometimes VMID targets are not getting rediscovered after a port reset. The iocb is not freed in lpfc_cmpl_ct_cmd_vmid(), which is the completion function for the appid CT commands. So after a port reset, the count of sges is less than the expected count of 250. This causes post reset operation logic to fail and keep the port offline. Fix by freeing the iocb and kref put for the lpfc_cmpl_ct_cmd_vmid() early return cases. Link: https://lore.kernel.org/r/20220911221505.117655-5-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
In a situation where the node state changes while a REG_LOGIN is in progress, the LPFC_MBOXQ_t structure is cleared and reused for an UNREG_LOGIN command to release RPI resources without first freeing the mbuf pool resource allocated for REG_LOGIN. Release mbuf pool resource prior to repurposing of the mailbox command structure from REG_LOGIN to UNREG_LOGIN. Link: https://lore.kernel.org/r/20220911221505.117655-4-jsmart2021@gmail.comCo-developed-by:
-
James Smart authored
When a FLOGI is received before we have issued our FLOGI, the ACC response to the received FLOGI is issued with SID 2 instead of the expected fabric controller SID. Certain target vendors ignore the malformed ACC with SID 2 and wait for a properly filled ACC with a fabric controller SID. The lpfc_sli_prep_wqe() routine depends on the FC_PT2PT flag to fill in the fabric controller SID when in PT2PT mode, but due to a previous commit the flag was getting cleared. Fix by adding a check for the defer_flogi_acc flag to know whether or not to clear the FC_PT2PT flag on link up. Link: https://lore.kernel.org/r/20220911221505.117655-3-jsmart2021@gmail.com Fixes: 439b9329 ("scsi: lpfc: Fix unsolicited FLOGI receive handling during PT2PT discovery") Co-developed-by:
-
James Smart authored
The if statment check (prli_fc4_req & PRLI_NVME_TYPE) evaluates to true when receiving a PRLI request for bogus FC4 type codes that happen to have the 3rd or 5th bit set because PRLI_NVME_TYPE is 0x28. This leads to sending a PRLI_NVME_ACC even for bogus FC4 type codes. Change the bitwise & check to an exact == type code check to ensure we send PRLI_NVME_ACC only for NVME type coded PRLI requests. Link: https://lore.kernel.org/r/20220911221505.117655-2-jsmart2021@gmail.comCo-developed-by:
-
Dan Carpenter authored
The error code from mpi3mr_post_transport_req() is supposed to be passed to bsg_job_done(job, rc, reslen), but it isn't. Link: https://lore.kernel.org/r/YyMISJzVDARpVwrr@kili Fixes: 176d4aa6 ("scsi: mpi3mr: Support SAS transport class callbacks") Acked-by:
Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
There are three error paths which return success: 1) Propagate the error code from mpi3mr_post_transport_req() if it fails. 2) Return -EINVAL if "ioc_status != MPI3_IOCSTATUS_SUCCESS". 3) Return -EINVAL if "le16_to_cpu(mpi_reply.response_data_length) != sizeof(struct rep_manu_reply)" Link: https://lore.kernel.org/r/YyMIJh1HU2Qz9+Rs@kili Fixes: 2bd37e28 ("scsi: mpi3mr: Add framework to issue MPT transport cmds") Acked-by:
-
Kees Cook authored
ahd_linux_setup_iocell_info() intentionally writes to the const-marked aic79xx_iocell_info array, but is called during __init, so the location is actually writable at this point on most architectures. Annotate this explicitly with __ro_after_init to avoid static analysis confusion. Link: https://lpc.events/event/16/contributions/1175/attachments/1109/2128/2022-LPC-analyzer-talk.pdf Link: https://lore.kernel.org/r/20220914115953.3854029-1-keescook@chromium.org Cc: Hannes Reinecke <hare@suse.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reported-by:
David Malcolm <dmalcolm@redhat.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Gaosheng Cui authored
se_tmr_req_cache has been removed since commit c8e31f26 ("target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cache"). Remove extern. Link: https://lore.kernel.org/r/20220913023722.547249-3-cuigaosheng1@huawei.comSigned-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
-
Gaosheng Cui authored
qla2x00_get_fw_version_str() has been removed since commit abbd8870 ("[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables."). qla2x00_release_nvram_protection() has been removed since commit 459c5378 ("[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines."). qla82xx_rdmem() and qla82xx_wrmem() have been removed since commit 3711333d ("[SCSI] qla2xxx: Updates for ISP82xx."). qla25xx_rd_req_reg(), qla24xx_rd_req_reg(), qla25xx_wrt_rsp_reg(), qla24xx_wrt_rsp_reg(), qla25xx_wrt_req_reg() and qla24xx_wrt_req_reg() have been removed since commit 08029990 ("[SCSI] qla2xxx: Refactor request/response-queue register handling."). qla2x00_async_login_done() has been removed since commit 726b8548 ("qla2xxx: Add framework for async fabric discovery"). qlt_24xx_process_response_error() has been removed since commit c5419e26 ("scsi: qla2xxx: Combine Active command arrays."). Remove the declarations for them from header file. Link: https://lore.kernel.org/r/20220913023722.547249-2-cuigaosheng1@huawei.comSigned-off-by:
-
Dmitry Bogdanov authored
The default target port group is always returned in the list of port groups, even if the behaviour is unwanted, i.e. it has no members and non-default port groups are primary port groups. That violates SPC-4 "6.37 REPORT TARGET PORT GROUPS command": Every target port group shall contain at least one target port. The target port group descriptor shall include one target port descriptor for each target port in the target port group. This patch hides port groups with no ports in REPORT TARGET PORT GROUPS response. Link: https://lore.kernel.org/r/20220912214549.27882-1-d.bogdanov@yadro.comSigned-off-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by:
-
Dmitry Bogdanov authored
SAM-5 4.8.3 (SCSI target device with multiple SCSI ports structure) obligates to set MULTIP bit when there's multiple SCSI target ports: Each device server shall indicate the presence of multiple SCSI target ports by setting the MULTIP bit to one in its standard INQUIRY data (see SPC-4). Set MULTIP bit automatically to indicate the presence of multiple SCSI target ports within standard inquiry response data if there are multiple target ports in all target port groups of the se_device. Link: https://lore.kernel.org/r/20220912125457.22573-2-d.bogdanov@yadro.comReviewed-by:
Mike Christie <michael.christie@oracle.com> Co-developed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
- 07 Sep, 2022 13 commits
-
-
Colin Ian King authored
There is a spelling mistake in a MODULE_PARM_DESC description. Fix it. Link: https://lore.kernel.org/r/20220906140010.194273-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
John Garry authored
Remote devices may go missing from the per-device nexus reset part of the HA nexus, i.e after the controller reset. This is because libsas may find the devices to be gone as the phy may be temporarily down when processing the bcast event generated from the nexus reset. Filter out bcast events during this time to stop the devices being lost. Link: https://lore.kernel.org/r/1662378529-101489-6-git-send-email-john.garry@huawei.comSigned-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
John Garry authored
Add a helper for bcast processing to reduce duplication. Link: https://lore.kernel.org/r/1662378529-101489-5-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
In resetting the controller, SATA devices may be lost. The issue is that when we insert the bcast events to rescan the topology in hisi_sas_rescan_topology(), when we subsequently nexus reset the SATA devices in hisi_sas_async_I_T_nexus_reset(), there is a small timing window in which the remote phy is down and we process the bcast event (meaning that libsas judges that the disk is lost). Ensure that all bcast events are processed prior to the nexus reset to close this window. Link: https://lore.kernel.org/r/1662378529-101489-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Once the controller HW has been reset then we can unset flag HISI_SAS_HW_FAULT_BIT. In clearing this flag earlier we can now successfully execute commands in hisi_sas_controller_reset_done(), like bcast processing. Link: https://lore.kernel.org/r/1662378529-101489-3-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Now that libsas and the SCSI core code limits the default sectors from commit 4cbfca5f ("scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit") and commit 608128d3 ("scsi: sd: allow max_sectors be capped at DMA optimal size limit"), there is no need for the hack to limit the max HW sectors. Link: https://lore.kernel.org/r/1662378529-101489-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing run-time destination buffer bounds checking for memcpy(), specify the destination output buffer explicitly, instead of asking memcpy() to write past the end of what looked like a fixed-size object. Silences future run-time warning: memcpy: detected field-spanning write (size 80) of single field "trc + 1" (size 64) There is no binary code output differences from this change. Link: https://lore.kernel.org/r/20220901205729.2260982-1-keescook@chromium.org Cc: Bradley Grove <linuxdrivers@attotech.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Letu Ren authored
The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device". We shouldn't disable a device that failed to be enabled. A simple return is fine. Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.comReported-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
Letu Ren <fantasquex@gmail.com> Signed-off-by:
-
Daniil Lunev authored
Userspace may want to manually control when the data should go into WriteBooster buffer. The control happens via "wb_on" node, but presently, there is no simple way to check if WriteBooster is supported and enabled. Expose the Write Booster and Clock Scaling capabilities to be able to determine if the Write Booster is available and if its manual control is blocked by Clock Scaling mechanism. Link: https://lore.kernel.org/r/20220829081845.v8.1.Ibf9efc9be50783eeee55befa2270b7d38552354c@changeidReviewed-by:
Daniil Lunev <dlunev@chromium.org> Signed-off-by:
-
Jack Wang authored
Add missing error check for dma_map_sg(). Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20220826101435.79170-1-jinpu.wang@ionos.comSigned-off-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Mike Christie authored
The host codes that were supposed to only be used for internal use are now not used, so remove them. Link: https://lore.kernel.org/r/20220812010027.8251-11-michael.christie@oracle.comReviewed-by:
-
Mike Christie authored
Don't use: - DID_TARGET_FAILURE - DID_NEXUS_FAILURE - DID_ALLOC_FAILURE - DID_MEDIUM_ERROR Instead use the SCSI midlayer internal values. Link: https://lore.kernel.org/r/20220812010027.8251-10-michael.christie@oracle.comReviewed-by:
-
Mike Christie authored
If a driver returns: - DID_TARGET_FAILURE - DID_NEXUS_FAILURE - DID_ALLOC_FAILURE - DID_MEDIUM_ERROR we hit a couple bugs: 1. The SCSI error handler runs because scsi_decide_disposition() has no case statements for them and we return FAILED. 2. For SG IO the userspace app gets a success status instead of failed, because scsi_result_to_blk_status() clears those errors. This patch adds a new internal error code byte for use by the SCSI midlayer. This will be used instead of the above error codes, so we don't have to play that clearing the host code game in scsi_result_to_blk_status() and drivers cannot accidentally use them. A subsequent commit will then remove the internal users of the above codes and convert us to use the new ones. Link: https://lore.kernel.org/r/20220812010027.8251-9-michael.christie@oracle.comReviewed-by:
-
