- 16 May, 2012 40 commits
-
-
Pablo Neira Ayuso authored
Extend log message if packets are ignored to include the TCP state, ie. replace: [ 3968.070196] nf_ct_tcp: invalid packet ignored IN= OUT= SRC=... by: [ 3968.070196] nf_ct_tcp: invalid packet ignored in state ESTABLISHED IN= OUT= SRC=... This information is useful to know in what state we were while ignoring the packet. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-
Pablo Neira Ayuso authored
Use: ((u64)(HASH_VAL * HASH_SIZE)) >> 32 as suggested by David S. Miller. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Dan Carpenter authored
There is a typo in the error checking and "&&" was used instead of "||". If skb_header_pointer() returns NULL then it leads to a NULL dereference. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hans Schillstrom <hans.schillstrom@ericsson.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
David Miller says: The canonical way to validate if the set bits are in a valid range is to have a "_ALL" macro, and test: if (val & ~XT_HASHLIMIT_ALL) goto err;" make it so. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
frank.blaschka@de.ibm.com authored
The qeth layer3 driver is notified about IP address changes. Changes concerning qeth driven network interfaces have to be forwarded to the OSA-card. This includes IP addresses of VLAN interfaces with a qeth device as base device. Function qeth_l3_verify_vlan_dev() determines if the net_device of the IP event belongs to a vlan device belonging to a qeth device as real device. This function is broken starting with commit 7ff0bcf6 , which means IP addresses of VLAN devices are no longer set at the base qeth device. The patch repairs function qeth_l3_verify_vlan_dev(). Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frank Blaschka authored
Commit 1abd2296 starts removing token ring from qeth_l3. This patch removes the rest of token ring related code from the driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
- sock_flag() accepts a const pointer - sock_flag() returns a boolean Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
codel_should_drop() logic allows a packet being not dropped if queue size is under max packet size. In fq_codel, we have two possible backlogs : The qdisc global one, and the flow local one. The meaningful one for codel_should_drop() should be the global backlog, not the per flow one, so that thin flows can have a non zero drop/mark probability. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
MISDN_CTRL_RX_OFF is a meachanism to discard RX data in the driver if the data is not needed by the application. It can be used when playing mesages, but not recording or with unidirectional protocols. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
MISDN_CTRL_FILL_EMPTY is a meachanism to send a fixed value (normally silence) as long no data from upper layers is available. It can be used when recording voice messages or with unidirectional protocols. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
If the FIFO of the card is small, many short messages are queued up to the upper layers and the userspace. This change allows the applications to set a minimum datalen they want from the drivers. Create a common control function to avoid code duplication in each driver. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
We did allways allocate maxsize buffers, but for transparent data we know the actual size. Use a common function to calculate size and detect overflows. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Bachem authored
Here was a off by one in the activation/deactivation. The additional activation in open_bchannel() did hide it, but only if you do not try to use B2. Signed-off-by: Martin Bachem <info@colognechip.com> Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
If we detect the latest hardware revision we should use the bigger fifo to avoid TX underruns and have less interrupts. TX underruns should be logged as warning. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
It is better to send a confirm for transparent data early as possible to avoid TX underuns. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
If a channel was closed after it was deactivated it could happen that something was not proper resetted. The test if a channel is still activ was wrong, so remove it and always do the cleanup. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Update the documentation according to latest changes. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Add support for IEEE 802.15.4 loopback driver - useful development and debugging tool. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Support for monitor device intended to capture all the network activity. This interface could be used by networks sniffers and is already supported by WireShark. That's a good test point to check that basic MAC support works. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
This patch adds functionality for registration and removing slaves in the stack. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
This stack implementation distinguishes several types of slave interfaces. Another parameter to 'add_iface_' function is added to clarify the interface type is going to be registered. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Basic support for IEEE 802.15.4 management information base. Current implementation contains a command to set HW address only. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Declare set of MAC-commands for reduced functionality interface. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Slaves represent typical network interfaces available from userspace. Each ieee802154 device/transceiver may have several slaves and able to be associated with several networks at the same time. So this patch adds structure for slaves declaration. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
According IEEE 802.15.4 standard each node can be either full functionality device (FFD) or reduce functionality device (RFD). So 2 sets of operations are needed. This patch declare RFD operations structure. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Main TX data path implementation between upper and physical layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
An interface to allocate and register ieee802154 compatible device. The allocated device has the following representation in memory: +-----------------------+ | struct wpan_phy | +-----------------------+ | struct mac802154_priv | +-----------------------+ | driver's private data | +-----------------------+ Used by device drivers to register new instance in the stack. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
alex.bluesman.smirnov@gmail.com authored
The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masanari Iida authored
Correcting spelling "extenal" to "external" in hfcmulti.c Signed-off-by: Masanari Iida <standby24x7@gmail.com>
-
-
Joe Perches authored
Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Daney authored
This function is only referenced from within phy_device.c, so there is no reason to export it. In fact, we can make it static. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Add missing resource tracking for XRC domains and complete the tracking for HCA network flow counters. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Currently the slave and master resources are deleted after master freed all bitmaps. If any resources were not properly cleaned up during the shutdown process, an Oops would result. Fix so that delete slave (only) resources during cleanup. Master resources are cleaned up during unload process, and need not separately be cleaned. Note that during cleanup, we need to split the resource-tracker freeing functionality. Before removing all the bitmaps, we free any leftover slave resources. However, we can only remove the resource tracker linked list after all bitmap frees, since some of the freeing functions (e.g., mlx4_cleanup_eq_table) use paravirtualized FW commands which expect the resource tracker linked list to be present. Found-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Consider the following scenario: 2 HCAs, where only one of which can run SRIOV. If we reset the module parameter, all the VFs of the SRIOV HCA will be claimed by the PPF host (-- the code relies on num_vfs being non-zero to avoid this claiming, and num_vfs was reset when pci_enable_sriov failed for the non-SRIOV HCA). The solution is not to touch the num_vfs parameter. Also, eliminate the unneeded check of num_vfs when disabling sriov (the dev flag bit is sufficient). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Removed unsued *_str helper functions from resource_tracker.c Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
The "wrapped" was incorrect, since no wrapper function was defined. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-