The function rtw_remove_bcn_ie() is never used, so remove it.
Discovered by cppcheck.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtw_add_bcn_ie() is never used, so remove it.
Discovered by cppcheck.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses to improve readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use x instead of x != NULL.
Use !x instead of x == NULL.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix indentation to clear checkpatch warnings.
WARNING: suspect code indent for conditional statements
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use is_broadcast_ether_addr instead of checking each byte of the
address array for 0xff. Shortens the code and improves readability.

As required by is_broadcast_ether_addr, the address array sta_addr
is properly aligned in all uses. Thanks to Joe Perches.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use is_multicast_ether_addr instead of custom IS_MCAST.
The variable for the result of IS_MCAST was only used in the
if conditional. So remove the extra variable and move the call
to is_multicast_ether_addr into the conditional.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

File net.h contains definitions that are exclusively used by
the key generator/classification API. Merge its contents with
dpkg.h in order to reduce the number of private headers.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

File net.h has several bitmask defines that could be implemented
more clearly using the BIT() macro.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

File net.h contains unused defines, so remove them.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comments in file net.h are too fancy for their own good,
so convert them to the regular format.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DPAA2 Ethernet driver files use a GPL-2.0+ OR BSD-3-Clause
license. Add SPDX tags and delete the full license text,
keeping the existing licenses for each file.
Add a GPL-2.0 tag for the Makefile.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the DPAA2 Ethernet driver documentation to .rst format
and rename the file accordingly.
Also add a SPDX tag to the new rst file.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the sparse warnings by making use of le32_to_cpus() &
cpu_to_le32s() conversion API's.
Remove the unnecessary byte-order conversion in
wilc_wlan_parse_response_frame() as the data is copied using individual
byte operation.

Also added the byte-order conversion for 'header' in
wilc_wfi_monitor_rx() & wilc_wfi_p2p_rx() as received in LE byte-order.

The link [1] contains the details of discussion related to this patch.

[1]. https://patchwork.kernel.org/patch/10436791/Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use the correct data type 'u16' for keeping the WID
value in 'wilc_cfg_word' & 'wilc_cfg_str' structure.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor wilc_wlan_handle_isr_ext() to avoid the use of the goto label.
Also avoid the unnecessary NULL check for 'wilc->rx_buffer' and
calling wilc_wlan_handle_rxq() only after wilc_wlan_rxq_add() call.
The link [1] contains details for discussion related to this changes.

[1]. https://patchwork.kernel.org/patch/10533601/Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to use shorter name for 'rcvd_ch_cnt' to 'ch_cnt' to avoid
line over 80 character issue reported by checkpatch.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added comments for 'hif_cs' mutex to avoid checkpatch.pl reported
issues.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to update the debug logs message to provide correct
information. Also added the function name tag for same description log
to help identify the place from where log was captured.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unnecessary comments and commented code.
Also updated description for few of comments.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changes to compile module component along with SPI and SDIO module.
Previously 'wilc1000.ko' used to generate along with wilc-spi.ko or
wilc1000-sdio.ko module. After these changes only wilc1000-spi.ko or
wilc1000-sdio.ko modules are required for SPI and SDIO respectively.
These changes are done to address below TODO item.

- make SPI and SDIO components coexist in one build
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds crtc page-flip support by passing the new requested framebuffer
to vbox_crtc_do_set_base().

Note there is no attempt to support vblank interrupts, it's not
not known how to do this in VBOX or if it is even possible. Since
this page-flip implementation does not try to sync the page-flip
to vertical blanking, tearing effects are possible.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This modifies vbox_crtc_do_set_base() to take a new framebuffer to
be activated, instead of the existing framebuffer attached to the crtc.
This change allows the function to be given the new framebuffer from
a page-flip request.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add handling of possible allocation failure.

Reported by smatch:

  drivers/staging/gasket/gasket_sysfs.c:105 put_mapping() error: potential null dereference 'files_to_remove'. (kcalloc returns null)
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.19c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of IIO new device support, cleanups and features for the 4.19 cycle.

This is a somewhat sneaky late pull request given Linus has announced
a likely 1 week delay.  If it is too late I'll resend after the merge
window.  I merged in the fixes branch as those are primarily around
things queued for the merge window.

Particulary good to see the output of our Himanshu Jha, a GSOC student
who developed the bme680 driver.

New device support:
* bme680 gas sensor (with temperature, humidity and pressure)
  - new driver to support this device
* vcn4000
  - support vcnl4200 (lots of rework to allow this)
  - ids added for VCNL4010 and VCNL4020 sensors

New features:
* ad9523
  - support the various external signal options via gpios.

Cleanups and fixes
* ad_sigma_delta
  - unsigned long for a timeout.
* ad9523
  - fix a wrong return value that was indicating successful write failed
    and might lead to an infinite loop.
* si1133
  - fix an impossible test.
  - fix an uninitialsed variable by reading from the device in all paths.
* xilinx xadc
  - check for return values in clk related functions
  - limit the pcap clock frequency to supported ranges.
  - stash the irq to avoid calling platform_get_irq from the remove path.
  - ensure the irq is actually requested before we enable the hardware to
    output it.

The include guard symbol for gasket_page_table.h is out-of-date.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gasket_free_dev() is called only from driver PCI probe and remove
function. It is guaranteed that that pci_dev structure is not going
anywhere during that time; there is no need to take this additional
reference.

This reverts commit dd9d1502.
Reported-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When gasket core was converted from using capable() to use ns_capable()
instead, the type of the variable holding the result should have been
converted from int to bool.
Reported-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

apex.h is supposed to contain kernel-userspace interface definitions,
but has a number of defines that are only used by apex_driver.c or are
not used at all.  Move driver implementation defines not shared with
userspace to the driver source.  Remove unused defines.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Multi-line alignment formatting issues fixed, remove the TODO entry for
this.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix multi-line alignment formatting to look like:
      int ret = long_function_name(device, VARIABLE1, VARIABLE2,
                                   VARIABLE3, VARIABLE4);
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix multi-line alignment formatting to look like:
      int ret = long_function_name(device, VARIABLE1, VARIABLE2,
                                   VARIABLE3, VARIABLE4);
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix multi-line alignment formatting to look like:
      int ret = long_function_name(device, VARIABLE1, VARIABLE2,
                                   VARIABLE3, VARIABLE4);

Many of these TODO items were previously cleaned up during the conversion
to standard logging functions.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix multi-line alignment formatting to look like:
      int ret = long_function_name(device, VARIABLE1, VARIABLE2,
                                   VARIABLE3, VARIABLE4);

Many of these TODO items were previously cleaned up during the conversion
to standard logging functions.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix multi-line alignment formatting to look like:
      int ret = long_function_name(device, VARIABLE1, VARIABLE2,
                                   VARIABLE3, VARIABLE4);
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The static function declarations are removed, remove the TODO file entry
for this.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove forward declarations of static functions, move code to avoid
forward references, for kernel style.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove forward declarations of static functions, move code to avoid
forward references, for kernel style.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove forward declarations of static functions, move code to avoid
forward references, for kernel style.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove forward declarations of static functions, move code to avoid
forward references, for kernel style.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>