- 17 Jun, 2007 5 commits
-
-
Salyzyn, Mark authored
Sundry cleanups: 1) Use kzalloc instead of kmalloc. 2) Make sure probe worked before recalling the SCSI command to finalize processing. 3) _aac_probe_container2 and _aac_probe_container1 return value goes unused, change return to void. 4) Use a lower depth pointer reference to pick up the driver instance variable. 5) Although effectively unused except to fake for scsicmd validity, set the scsi_done in probe code to aac_probe_container_callback1 instead of the less valid dummy reference to _aac_probe_container1. 6) SCp.phase is set in aac_valid_context, drop setting up this value in caller when unnecessary. 7) take container target id at the beginning, rather than referencing scmd_id() to pick it up. There should be no side effects or functionality changes. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Randy Dunlap authored
Correct the module info text for the default value of "every_nth" to 0. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
David C Somayajulu authored
This patch provides the following: 1. remove warning ignoring the return value of pci_set_mwi() 2. allows HBA to be online when the initiator ip address is uninitialized. Signed-off-by:
David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by:
-
nickcheng(鄭守謙 authored
Description: 1. Implement PCI-Express error recovery function and AER capability, especially thanks to Yanmin Zhang's openhanded help about AER 2. Implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096 if firmware version is latter than 1.42 3. Add arcmsr_done4_abort_postqueue in arcmsr_iop_reset function to improve the stability as hot-unplug/plug 4. Modify the ISR, arcmsr_interrupt routine, to prevent the inconsistency with sg_mod driver if application directly calls the arcmsr driver w/o passing through scsi midlayer Signed-off-by:Nick Cheng <nick.cheng@areca.com.tw> [jejb: unused variable removal] Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
"Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by:
-
- 16 Jun, 2007 1 commit
-
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. TODO: use scsi_for_each_sg() in the breakup handling. Signed-off-by:
-
- 07 Jun, 2007 2 commits
-
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by:
Roland Dreier <rdreier@cisco.com> Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
- 02 Jun, 2007 8 commits
-
-
Mike Christie authored
iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx), and partial offload (broadcom). To be able to allow each stack or driver or port (virtual or physical) to be able to log into the same target portal we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session. This patch adds the netdev name, which is used by software iscsi when it binds a session to a netdevice using the SO_BINDTODEVICE sock opt. It cannot use HWADDRESS because if someone did vlans then the same netdevice will have the same mac and the initiator,target id will not be unique. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by:
-
Mike Christie authored
This patch exports the local address for the session. For qla4xxx this is the ip of the hba's port. For software this is the src addr of the socket. Signed-off-by:
-
Mike Christie authored
This patch should fix the file descriptor leak problem. A quick look through the kernel shows that users of sockfd_lookup use sockfd_put to release their handle. We were using sock_release which from the comments and code look like it does not release the get() on the file from the lookup. Signed-off-by:
-
Mike Christie authored
Userspace will want to know what the driver/FW/HW capabilites when it comes to some operations like if the hardware can do discovery or if it can store iscsi info like what target was used for boot. This patch adds some new caps so userspace can tell if the driver supports hardware/fw based sendtargets discovery and if the hardware has some flash which may be holding or can contain some iscsi target info . Signed-off-by:
-
Mike Christie authored
Add a slave_configure function to iSCSI TCP to remove any DMA alignment restriction. This permits the use of direct IO from arbitrary addresses. Signed-off-by:
Pete Wyckoff <pw@osc.edu> Signed-off-by:
-
Mike Christie authored
If we got the padding, data and header in different skbs, we were not handling the padding correctly because we attributed it to the data's skb. This resulted in the initiator reading from pad bytes + skb offset instead of the correct offset. If you could not connect with the open solaris target, this will fix the lock up problem you were hitting. Signed-off-by:
-
Mike Christie authored
This patch allows us to set can_queue and cmds_per_lun from userspace when we create the session/host. From there we can set it on a per target basis. The patch fully converts iscsi_tcp, but only hooks up ib_iser for cmd_per_lun since it currently has a lots of preallocations based on can_queue. Signed-off-by:
-
Mike Christie authored
The cmdsn allocation and pdu transmit code can race, and we can end up sending a pdu with cmdsn 10 before a pdu with 5. The target will then fail the connection/session. This patch fixes the problem by delaying the cmdsn allocation until we are about to send the pdu. This also removes the xmitmutex. We were using the connection xmitmutex during error handling to handle races with mtask and ctask cleanup and completion. For ctasks we now have nice refcounting and for the mtask, if we hit the case where the mtask timesout and it is floating around somewhere in the driver, we end up dropping the session. And to handle session level cleanup, we use the xmit suspend bit along with scsi_flush_queue and the session lock to make sure that the xmit thread is not possibly transmitting a task while we are trying to kill it. Signed-off-by:
-
- 01 Jun, 2007 12 commits
-
-
Mike Christie authored
If iscsi_tcp partially sends a header, it would recalculate the header size and readd the size of the digest (if header digests are used).This would cause us to send sizeof(digest) extra bytes when we sent the rest of the header. Signed-off-by:
-
Mike Christie authored
The attached patches add sysfs files for the chap settings to the iscsi transport class, iscsi_tcp and ib_iser. This is needed for software iscsi because there are times when iscsid can die and it will need to reread the values it was using. And it is needed by qla4xxx for basic management opertaions. This patch does not hook in qla4xxx yet, because I am not sure the mbx command to use. Signed-off-by:
-
Mike Christie authored
- Remove shadow of request length from struct iscsi_cmd_task. - change all users to use scsi_cmnd->request_bufflen directly (With bidi we will use scsi-ml API to retrieve in/out length) Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
-
Mike Christie authored
This patch fixes handling of expected datasn/r2tsn as received from target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing. . unify expected datasn/r2tsn into one counter . calculate than check expected datasn/r2tsn. On error print a message and fail the request. (TODO use iscsi retransmits) . remove the FIXME ;) . avoid zero length memset Signed-off-by:
-
Mike Christie authored
For iscsi root boot, software iscsi needs to know what the BIOS/OF initiator used for the initiator name so this puts it in sysfs for userspace to be able to pick up. For hw iscsi, it is nice to see what the card is using. This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser. Signed-off-by:
-
Mike Christie authored
iscsid and udev need to key off the hw address being used so add some helpers for iser and iscsi tcp. Also convert them Signed-off-by:
-
Mike Christie authored
The iscsi class uses the set_param event to set session and connection params. This patch adds a set_host_param so we can set host level values. Signed-off-by:
-
Mike Christie authored
We are going to be adding more host level sysfs attrs and set_params, so this patch has them take a scsi_host instead of either a scsi_host or host no. Signed-off-by:
-
Mike Christie authored
Export mac as hw address. Signed-off-by:
-
Mike Christie authored
Add hw address sysfs file. Signed-off-by:
-
Mike Christie authored
Let's not oops when we cannot allocate a skb! Add a check for if alloc_skb fails. Signed-off-by:
-
Salyzyn, Mark authored
Inspired by Brian King's patch to the ibmvscsi driver. Adds support for a changeable queue depth to the aacraid driver. Signed-off-by:
-
- 31 May, 2007 12 commits
-
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:
Sumant Patro <sumant.patro@lsi.com> Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
Christoph Hellwig authored
Currently accessing the scsi host private data is rather messy because it comes as an unsigned long that always needs a cast first. This patch introduces a helper that does the cast called shost_priv. It's similar in spirit to netdev_priv for network drivers. This is the first patch introducing the macro, and the second patch in the series will convert esp and it's subdrivers as an example. Further conversion will wait until the helper is in the tree to make patch juggling easier. Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
FUJITA Tomonori authored
This removes the remaining unnecessary map_single path Signed-off-by:
-
James Bottomley authored
Conflicts: drivers/scsi/jazz_esp.c Same changes made by both SCSI and SPARC trees: problem with UTF-8 conversion in the copyright. Signed-off-by: -
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by:
Adam Radford <linuxraid@amcc.com> Signed-off-by:
-
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup. Signed-off-by:
-
Bryan Wu authored
It should be pass "newsize" to vmtruncate function to modify the inode->i_size, while the old size is passed to vmtruncate. This bug was caught by LTP truncate test case on Blackfin platform. After it was fixed, the LTP truncate test case passed. Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
