- 31 Dec, 2008 40 commits
-
-
Avi Kivity authored
Userspace might need to act differently. Signed-off-by:Avi Kivity <avi@redhat.com>
-
Rusty Russell authored
This changes cpus_hardware_enabled from a cpumask_t to a cpumask_var_t: equivalent for CONFIG_CPUMASKS_OFFSTACK=n, otherwise dynamically allocated. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rusty Russell authored
We're getting rid on on-stack cpumasks for large NR_CPUS. 1) Use cpumask_var_t/alloc_cpumask_var. 2) smp_call_function_mask -> smp_call_function_many 3) cpus_clear, cpus_empty, cpu_set -> cpumask_clear, cpumask_empty, cpumask_set_cpu. This actually generates slightly smaller code than the old one with CONFIG_CPUMASKS_OFFSTACK=n. (gcc knows that cpus cannot be NULL in that case, where cpumask_var_t is cpumask_t[1]). Signed-off-by:
-
Rusty Russell authored
Avi said: > Wow, code duplication from Rusty. Things must be bad. Something about glass houses comes to mind. But instead, a patch. Signed-off-by:
-
Christian Borntraeger authored
There is a race between a "close of the file descriptors" and module unload in the kvm module. You can easily trigger this problem by applying this debug patch: >--- kvm.orig/virt/kvm/kvm_main.c >+++ kvm/virt/kvm/kvm_main.c >@@ -648,10 +648,14 @@ void kvm_free_physmem(struct kvm *kvm) > kvm_free_physmem_slot(&kvm->memslots[i], NULL); > } > >+#include <linux/delay.h> > static void kvm_destroy_vm(struct kvm *kvm) > { > struct mm_struct *mm = kvm->mm; > >+ printk("off1\n"); >+ msleep(5000); >+ printk("off2\n"); > spin_lock(&kvm_lock); > list_del(&kvm->vm_list); > spin_unlock(&kvm_lock); and killing the userspace, followed by an rmmod. The problem is that kvm_destroy_vm can run while the module count is 0. That means, you can remove the module while kvm_destroy_vm is running. But kvm_destroy_vm is part of the module text. This causes a kerneloops. The race exists without the msleep but is much harder to trigger. This patch requires the fix for anon_inodes (anon_inodes: use fops->owner for module refcount). With this patch, we can set the owner of all anonymous KVM inodes file operations. The VFS will then control the KVM module refcount as long as there is an open file. kvm_destroy_vm will be called by the release function of the last closed file - before the VFS drops the module refcount. Signed-off-by:Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
There is an imbalance for anonymous inodes. If the fops->owner field is set, the module reference count of owner is decreases on release. ("filp_close" --> "__fput" ---> "fops_put") On the other hand, anon_inode_getfd does not increase the module reference count of owner. This causes two problems: - if owner is set, the module refcount goes negative - if owner is not set, the module can be unloaded while code is running This patch changes anon_inode_getfd to be symmetric regarding fops->owner handling. I have checked all existing users of anon_inode_getfd. Noone sets fops->owner, thats why nobody has seen the module refcount negative. The refcounting was tested with a patched and unpatched KVM module.(see patch 2/2) I also did an epoll_open/close test. Signed-off-by:Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
-
Eduardo Habkost authored
kvm_get_tsc_khz() currently returns the previously-calculated preset_lpj value, but it is in loops-per-jiffy, not kHz. The current code works correctly only when HZ=1000. Signed-off-by:
Eduardo Habkost <ehabkost@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
If the guest executes invlpg, peek into the pagetable and attempt to prepopulate the shadow entry. Also stop dirty fault updates from interfering with the fork detector. 2% improvement on RHEL3/AIM7. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
Skip syncing global pages on cr3 switch (but not on cr4/cr0). This is important for Linux 32-bit guests with PAE, where the kmap page is marked as global. Signed-off-by:
-
Marcelo Tosatti authored
Collapse remote TLB flushes on root sync. kernbench is 2.7% faster on 4-way guest. Improvements have been seen with other loads such as AIM7. Signed-off-by:
-
Marcelo Tosatti authored
Instead of invoking the handler directly collect pages into an array so the caller can work with it. Simplifies TLB flush collapsing. Signed-off-by:
-
Amit Shah authored
The VMMCALL instruction doesn't get recognised and isn't processed by the emulator. This is seen on an Intel host that tries to execute the VMMCALL instruction after a guest live migrates from an AMD host. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Guillaume Thouvenin authored
Add emulation of shld and shrd instructions Signed-off-by:
Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by:
-
Guillaume Thouvenin authored
Add the assembler code for instruction with three operands and one operand is stored in ECX register Signed-off-by:
-
Guillaume Thouvenin authored
Add SrcOne operand type when we need to decode an implied '1' like with regular shift instruction Signed-off-by:
-
Guillaume Thouvenin authored
Instruction like shld has three operands, so we need to add a Src2 decode set. We start with Src2None, Src2CL, and Src2ImmByte, Src2One to support shld/shrd and we will expand it later. Signed-off-by:
-
Guillaume Thouvenin authored
Extend the opcode descriptor to 32 bits. This is needed by the introduction of a new Src2 operand type. Signed-off-by:
-
Glauber Costa authored
Right now, KVM does not remove a slot when we do a register ioctl for size 0 (would be the expected behaviour). Instead, we only mark it as empty, but keep all bitmaps and allocated data structures present. It completely nullifies our chances of reusing that same slot again for mapping a different piece of memory. In this patch, we destroy rmaps, and vfree() the pointers that used to hold the dirty bitmap, rmap and lpage_info structures. Signed-off-by:
Glauber Costa <glommer@redhat.com> Signed-off-by:
-
Hollis Blanchard authored
The only significant changes were to kvmppc_exit_timing_write() and kvmppc_exit_timing_show(), both of which were dramatically simplified. Signed-off-by:
Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by:
-
Hollis Blanchard authored
Existing KVM statistics are either just counters (kvm_stat) reported for KVM generally or trace based aproaches like kvm_trace. For KVM on powerpc we had the need to track the timings of the different exit types. While this could be achieved parsing data created with a kvm_trace extension this adds too much overhead (at least on embedded PowerPC) slowing down the workloads we wanted to measure. Therefore this patch adds a in-kernel exit timing statistic to the powerpc kvm code. These statistic is available per vm&vcpu under the kvm debugfs directory. As this statistic is low, but still some overhead it can be enabled via a .config entry and should be off by default. Since this patch touched all powerpc kvm_stat code anyway this code is now merged and simplified together with the exit timing statistic code (still working with exit timing disabled in .config). Signed-off-by:
Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by:
-
Hollis Blanchard authored
Store shadow TLB entries in memory, but only use it on host context switch (instead of every guest entry). This improves performance for most workloads on 440 by reducing the guest TLB miss rate. Signed-off-by:
-
Hollis Blanchard authored
Formerly, we used to maintain a per-vcpu shadow TLB and on every entry to the guest would load this array into the hardware TLB. This consumed 1280 bytes of memory (64 entries of 16 bytes plus a struct page pointer each), and also required some assembly to loop over the array on every entry. Instead of saving a copy in memory, we can just store shadow mappings directly into the hardware TLB, accepting that the host kernel will clobber these as part of the normal 440 TLB round robin. When we do that we need less than half the memory, and we have decreased the exit handling time for all guest exits, at the cost of increased number of TLB misses because the host overwrites some guest entries. These savings will be increased on processors with larger TLBs or which implement intelligent flush instructions like tlbivax (which will avoid the need to walk arrays in software). In addition to that and to the code simplification, we have a greater chance of leaving other host userspace mappings in the TLB, instead of forcing all subsequent tasks to re-fault all their mappings. Signed-off-by:
-
Hollis Blanchard authored
KVM currently ignores the host's round robin TLB eviction selection, instead maintaining its own TLB state and its own round robin index. However, by participating in the normal 44x TLB selection, we can drop the alternate TLB processing in KVM. This results in a significant performance improvement, since that processing currently must be done on *every* guest exit. Accordingly, KVM needs to be able to access and increment tlb_44x_index. (KVM on 440 cannot be a module, so there is no need to export this symbol.) Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
-
Hollis Blanchard authored
KVM on 440 has always been able to handle large guest mappings with 4K host pages -- we must, since the guest kernel uses 256MB mappings. This patch makes KVM work when the host has large pages too (tested with 64K). Signed-off-by:
-
Mark McLoughlin authored
Split out the logic corresponding to undoing assign_irq() and clean it up a bit. Signed-off-by:
Mark McLoughlin <markmc@redhat.com> Signed-off-by:
-
Mark McLoughlin authored
Make sure kvm_request_irq_source_id() never returns KVM_USERSPACE_IRQ_SOURCE_ID. Likewise, check that kvm_free_irq_source_id() never accepts KVM_USERSPACE_IRQ_SOURCE_ID. Signed-off-by:
-
Mark McLoughlin authored
Set assigned_dev->irq_source_id to -1 so that we can avoid freeing a source ID which we never allocated. Signed-off-by:
-
Mark McLoughlin authored
We never pass a NULL notifier pointer here, but we may well pass a notifier struct which hasn't previously been registered. Guard against this by using hlist_del_init() which will not do anything if the node hasn't been added to the list and, when removing the node, will ensure that a subsequent call to hlist_del_init() will be fine too. Fixes an oops seen when an assigned device is freed before and IRQ is assigned to it. Signed-off-by:
-
Mark McLoughlin authored
We will obviously never pass a NULL struct kvm_irq_ack_notifier* to this functions. They are always embedded in the assigned device structure, so the assertion add nothing. The irqchip_in_kernel() assertion is very out of place - clearly this little abstraction needs to know nothing about the upper layer details. Signed-off-by:
-
Hannes Eder authored
Impact: make global function static arch/x86/kvm/vmx.c:134:3: warning: symbol 'vmx_capability' was not declared. Should it be static? Signed-off-by:
Hannes Eder <hannes@hanneseder.net> Signed-off-by:
-
Hannes Eder authored
Impact: make global function static virt/kvm/kvm_main.c:85:6: warning: symbol 'kvm_rebooting' was not declared. Should it be static? Signed-off-by:
-
Avi Kivity authored
Notices by Guillaume Thouvenin. Signed-off-by: -
Avi Kivity authored
Set operand type and size to get correct writeback behavior. Signed-off-by: -
Avi Kivity authored
'ret' did not set the operand type or size for the destination, so writeback ignored it. Signed-off-by: -
Avi Kivity authored
Signed-off-by: -
Avi Kivity authored
Signed-off-by: -
Avi Kivity authored
Switch 'pop r/m' instruction to use the new function. Signed-off-by: -
Wu Fengguang authored
Add marker_synchronize_unregister() before module unloading. This prevents possible trace calls into unloaded module text. Signed-off-by:
Wu Fengguang <wfg@linux.intel.com> Signed-off-by:
-
Christian Borntraeger authored
The s390 backend of kvm never calls kvm_vcpu_uninit. This causes a memory leak of vcpu->run pages. Lets call kvm_vcpu_uninit in kvm_arch_vcpu_destroy to free the vcpu->run. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
Currently it is impossible to unload the kvm module on s390. This patch fixes kvm_arch_destroy_vm to release all cpus. This make it possible to unload the module. In addition we stop messing with the module refcount in arch code. Signed-off-by:
-
