- 18 Jan, 2017 20 commits
-
-
Mao Wenan authored
Relax ordering(RO) is one feature of 82599 NIC, to enable this feature can enhance the performance for some cpu architecure, such as SPARC and so on. Currently it only supports one special cpu architecture(SPARC) in 82599 driver to enable RO feature, this is not very common for other cpu architecture which really needs RO feature. This patch add one common config CONFIG_ARCH_WANT_RELAX_ORDER to set RO feature, and should define CONFIG_ARCH_WANT_RELAX_ORDER in sparc Kconfig firstly. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Reviewed-by:
Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ahern says: ==================== net: ipv6: simplify rt6_fill_node Remove a couple of unnecessary input arguments to rt6_fill_node. ==================== Signed-off-by: -
David Ahern authored
The prefix arg to rt6_fill_node is non-0 in only 1 path - rt6_dump_route where a user is requesting a prefix only dump. Simplify rt6_fill_node by removing the prefix arg and moving the prefix check to rt6_dump_route. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
All callers of rt6_fill_node pass 0 for nowait arg. Remove the arg and simplify rt6_fill_node accordingly. rt6_fill_node passes the nowait of 0 to ip6mr_get_route. Remove the nowait arg from it as well. Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: add sender-side procedures for stream reconf ssn reset request chunk Patch 6/6 is to implement sender-side procedures for the Outgoing and Incoming SSN Reset Request Parameter described in rfc6525 section 5.1.2 and 5.1.3 Patches 1-5/6 are ahead of it to define some apis and asoc members for it. Note that with this patchset, asoc->reconf_enable has no chance yet to be set, until the patch "sctp: add get and set sockopt for reconf_enable" is applied in the future. As we can not just enable it when sctp is not capable of processing reconf chunk yet. v1->v2: - put these into a smaller group. - rename some temporary variables in the codes. - rename the titles of the commits and improve some changelogs. v2->v3: - re-split the patchset and make sure it has no dead codes for review. v3->v4: - move sctp_make_reconf() into patch 1/6 to avoid kbuild warning. - drop unused struct sctp_strreset_req. ==================== Signed-off-by: -
Xin Long authored
This patch is to implement sender-side procedures for the Outgoing and Incoming SSN Reset Request Parameter described in rfc6525 section 5.1.2 and 5.1.3. It is also add sockopt SCTP_RESET_STREAMS in rfc6525 section 6.3.2 for users. Note that the new asoc member strreset_outstanding is to make sure only one reconf request chunk on the fly as rfc6525 section 5.1.1 demands. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This patch is to add sockopt SCTP_ENABLE_STREAM_RESET to get/set strreset_enable to indicate which reconf request type it supports, which is described in rfc6525 section 6.3.1. Signed-off-by:
-
Xin Long authored
This patch is to add reconf_enable field in all of asoc ep and netns to indicate if they support stream reset. When initializing, asoc reconf_enable get the default value from ep reconf_enable which is from netns netns reconf_enable by default. It is also to add reconf_capable in asoc peer part to know if peer supports reconf_enable, the value is set if ext params have reconf chunk support when processing init chunk, just as rfc6525 section 5.1.1 demands. Signed-off-by:
-
Xin Long authored
This patch is to add a primitive based on sctp primitive frame for sending stream reconf request. It works as the other primitives, and create a SCTP_CMD_REPLY command to send the request chunk out. sctp_primitive_RECONF would be the api to send a reconf request chunk. Signed-off-by:
-
Xin Long authored
This patch is to add a per transport timer based on sctp timer frame for stream reconf chunk retransmission. It would start after sending a reconf request chunk, and stop after receiving the response chunk. If the timer expires, besides retransmitting the reconf request chunk, it would also do the same thing with data RTO timer. like to increase the appropriate error counts, and perform threshold management, possibly destroying the asoc if sctp retransmission thresholds are exceeded, just as section 5.1.1 describes. This patch is also to add asoc strreset_chunk, it is used to save the reconf request chunk, so that it can be retransmitted, and to check if the response is really for this request by comparing the information inside with the response chunk as well. Signed-off-by:
-
Xin Long authored
This patch is to add asoc strreset_outseq and strreset_inseq for saving the reconf request sequence, initialize them when create assoc and process init, and also to define Incoming and Outgoing SSN Reset Request Parameter described in rfc6525 section 4.1 and 4.2, As they can be in one same chunk as section rfc6525 3.1-3 describes, it makes them in one function. Signed-off-by:
-
David S. Miller authored
Josef Bacik says: ==================== Rework inet_csk_get_port V3->V4: -Removed the random include of addrconf.h that is no longer needed. V2->V3: -Dropped the fastsock from the tb and instead just carry the saddrs, family, and ipv6 only flag. -Reworked the helper functions to deal with this change so I could still use them when checking the fast path. -Killed tb->num_owners as per Eric's request. -Attached a reproducer to the bottom of this email. V1->V2: -Added a new patch 'inet: collapse ipv4/v6 rcv_saddr_equal functions into one' at Hannes' suggestion. -Dropped ->bind_conflict and just use the new helper. -Fixed a compile bug from the original ->bind_conflict patch. The original description of the series follows: At some point recently the guys working on our load balancer added the ability to use SO_REUSEPORT. When they restarted their app with this option enabled they immediately hit a softlockup on what appeared to be the inet_bind_bucket->lock. Eventually what all of our debugging and discussion led us to was the fact that the application comes up without SO_REUSEPORT, shuts down which creates around 100k twsk's, and then comes up and tries to open a bunch of sockets using SO_REUSEPORT, which meant traversing the inet_bind_bucket owners list under the lock. Since this lock is needed for dealing with the twsk's and basically anything else related to connections we would softlockup, and sometimes not ever recover. To solve this problem I did what you see in Path 5/5. Once we have a SO_REUSEPORT socket on the tb->owners list we know that the socket has no conflicts with any of the other sockets on that list. So we can add a copy of the sock_common (really all we need is the recv_saddr but it seemed ugly to copy just the ipv6, ipv4, and flag to indicate if we were ipv6 only in there so I've copied the whole common) in order to check subsequent SO_REUSEPORT sockets. If they match the previous one then we can skip the expensive inet_csk_bind_conflict check. This is what eliminated the soft lockup that we were seeing. Patches 1-4 are cleanups and re-workings. For instance when we specify port == 0 we need to find an open port, but we would do two passes through inet_csk_bind_conflict every time we found a possible port. We would also keep track of the smallest_port value in order to try and use it if we found no port our first run through. This however made no sense as it would have had to fail the first pass through inet_csk_bind_conflict, so would not actually pass the second pass through either. Finally I split the function into two functions in order to make it easier to read and to distinguish between the two behaviors. I have tested this on one of our load balancing boxes during peak traffic and it hasn't fallen over. But this is not my area, so obviously feel free to point out where I'm being stupid and I'll get it fixed up and retested. Thanks, ==================== Signed-off-by: -
Josef Bacik authored
If we have non reuseport sockets on a tb we will set tb->fastreuseport to 0 and never set it again. Which means that in the future if we end up adding a bunch of reuseport sk's to that tb we'll have to do the expensive scan every time. Instead add the ipv4/ipv6 saddr fields to the bind bucket, as well as the family so we know what comparison to make, and the ipv6 only setting so we can make sure to compare with new sockets appropriately. Once one sk has made it onto the list we know that there are no potential bind conflicts on the owners list that match that sk's rcv_addr. So copy the sk's information into our bind bucket and set tb->fastruseport to FASTREUSESOCK_STRICT so we know we have to do an extra check for subsequent reuseport sockets and skip the expensive bind conflict check. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
inet_csk_get_port does two different things, it either scans for an open port, or it tries to see if the specified port is available for use. Since these two operations have different rules and are basically independent lets split them into two different functions to make them both more readable. Signed-off-by:
-
Josef Bacik authored
This is just wasted time, we've already found a tb that doesn't have a bind conflict, and we don't drop the head lock so scanning again isn't going to give us a different answer. Instead move the tb->reuse setting logic outside of the found_tb path and put it in the success: path. Then make it so that we don't goto again if we find a bind conflict in the found_tb path as we won't reach this anymore when we are scanning for an ephemeral port. Signed-off-by:
-
Josef Bacik authored
In inet_csk_get_port we seem to be using smallest_port to figure out where the best place to look for a SO_REUSEPORT sk that matches with an existing set of SO_REUSEPORT's. However if we get to the logic if (smallest_size != -1) { port = smallest_port; goto have_port; } we will do a useless search, because we would have already done the inet_csk_bind_conflict for that port and it would have returned 1, otherwise we would have gone to found_tb and succeeded. Since this logic makes us do yet another trip through inet_csk_bind_conflict for a port we know won't work just delete this code and save us the time. Signed-off-by: -
Josef Bacik authored
The only difference between inet6_csk_bind_conflict and inet_csk_bind_conflict is how they check the rcv_saddr, so delete this call back and simply change inet_csk_bind_conflict to call inet_rcv_saddr_equal. Signed-off-by:
-
Josef Bacik authored
We pass these per-protocol equal functions around in various places, but we can just have one function that checks the sk->sk_family and then do the right comparison function. I've also changed the ipv4 version to not cast to inet_sock since it is unneeded. Signed-off-by:
-
jpinto authored
This patch adds more info to stmicro' Kconfig files in order to be clearer that the driver can be used by ethernet cards based on 10/100/1000/EQOS Synopsys IP Cores. EQOS was also added stmmac/Kconfig Kconfig, since dwmac4 is in fact EQoS, one of Synopsys Ethernet IPs. More info at: https://www.synopsys.com/dw/ipdir.php?ds=dwc_ether_qosSigned-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
Martin KaFai Lau authored
This patch adds bpf_xdp_adjust_head() support to mlx5e. 1. rx_headroom is added to struct mlx5e_rq. It uses an existing 4 byte hole in the struct. 2. The adjusted data length is checked against MLX5E_XDP_MIN_INLINE and MLX5E_SW2HW_MTU(rq->netdev->mtu). 3. The macro MLX5E_SW2HW_MTU is moved from en_main.c to en.h. MLX5E_HW2SW_MTU is also moved to en.h for symmetric reason but it is not a must. v2: - Keep the xdp specific logic in mlx5e_xdp_handle() - Update dma_len after the sanity checks in mlx5e_xmit_xdp_frame() Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
- 17 Jan, 2017 20 commits
-
-
Jason Baron authored
Using a Mac OSX box as a client connecting to a Linux server, we have found that when certain applications (such as 'ab'), are abruptly terminated (via ^C), a FIN is sent followed by a RST packet on tcp connections. The FIN is accepted by the Linux stack but the RST is sent with the same sequence number as the FIN, and Linux responds with a challenge ACK per RFC 5961. The OSX client then sometimes (they are rate-limited) does not reply with any RST as would be expected on a closed socket. This results in sockets accumulating on the Linux server left mostly in the CLOSE_WAIT state, although LAST_ACK and CLOSING are also possible. This sequence of events can tie up a lot of resources on the Linux server since there may be a lot of data in write buffers at the time of the RST. Accepting a RST equal to rcv_nxt - 1, after we have already successfully processed a FIN, has made a significant difference for us in practice, by freeing up unneeded resources in a more expedient fashion. A packetdrill test demonstrating the behavior: // testing mac osx rst behavior // Establish a connection 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < S 0:0(0) win 32768 <mss 1460,nop,wscale 10> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 5> 0.200 < . 1:1(0) ack 1 win 32768 0.200 accept(3, ..., ...) = 4 // Client closes the connection 0.300 < F. 1:1(0) ack 1 win 32768 // now send rst with same sequence 0.300 < R. 1:1(0) ack 1 win 32768 // make sure we are in TCP_CLOSE 0.400 %{ assert tcpi_state == 7 }% Signed-off-by:Jason Baron <jbaron@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Tobias Klauser authored
Make the needlessly global struct ethtool_ops ethoc_ethtool_ops static to fix a sparse warning. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: RX hash configuration This series improves support for getting and setting RX hashing configuration on Solarflare adapters through ethtool. ==================== Signed-off-by: -
Edward Cree authored
Ensures that we report the key and indirection table the NIC is using, rather than (if setting them failed earlier) what we wanted it to use. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Ganesh Goudar authored
Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Gao Feng authored
The inet_num is u16, so use %hu instead of casting it to int. And the sk_bound_dev_if is int actually, so it needn't cast to int. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Shyam Saini authored
Use eth_zero_addr to assign zero address to the given address array instead of memset when the second argument in memset is address of zero. Also, it makes the code clearer Signed-off-by:
Shyam Saini <mayhs11saini@gmail.com> Signed-off-by:
-
Lance Richardson authored
Changed type of csum field in struct igmpv3_query from __be16 to __sum16 to eliminate type warning, made same change in struct igmpv3_report for consistency. Fixed up an ntohs() where htons() should have been used instead. Signed-off-by:
Lance Richardson <lrichard@redhat.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
-
David S. Miller authored
Robert Shearman says: ==================== mpls: Packet stats This patchset records per-interface packet stats in the MPLS forwarding path and exports them using a nest of attributes root at a new IFLA_STATS_AF_SPEC attribute as part of RTM_GETSTATS messages: [IFLA_STATS_AF_SPEC] -> [AF_MPLS] -> [MPLS_STATS_LINK] -> struct mpls_link_stats The first patch adds the rtnl infrastructure for this, including a new callbacks to per-AF ops of fill_stats_af and get_stats_af_size. The second patch records MPLS stats and makes use of the infrastructure to export them. The rtnl infrastructure could also be used to export IPv6 stats in the future. Changes in v2: - make incrementing IPv6 stats in mpls_stats_inc_outucastpkts conditional on CONFIG_IPV6 to fix build with CONFIG_IPV6=n ==================== Signed-off-by: -
Robert Shearman authored
Having MPLS packet stats is useful for observing network operation and for diagnosing network problems. In the absence of anything better, RFC2863 and RFC3813 are used for guidance for which stats to expose and the semantics of them. In particular rx_noroutes maps to in unknown protos in RFC2863. The stats are exposed to userspace via AF_MPLS attributes embedded in the IFLA_STATS_AF_SPEC attribute of RTM_GETSTATS messages. All the introduced fields are 64-bit, even error ones, to ensure no overflow with long uptimes. Per-CPU counters are used to avoid cache-line contention on the commonly used fields. The other fields have also been made per-CPU for code to avoid performance problems in error conditions on the assumption that on some platforms the cost of atomic operations could be more expensive than sending the packet (which is what would be done in the success case). If that's not the case, we could instead not use per-CPU counters for these fields. Only unicast and non-fragment are exposed at the moment, but other counters can be exposed in the future either by adding to the end of struct mpls_link_stats or by additional netlink attributes in the AF_MPLS IFLA_STATS_AF_SPEC nested attribute. Signed-off-by:
Robert Shearman <rshearma@brocade.com> Signed-off-by:
-
Robert Shearman authored
Add the functionality for including address-family-specific per-link stats in RTM_GETSTATS messages. This is done through adding a new IFLA_STATS_AF_SPEC attribute under which address family attributes are nested and then the AF-specific attributes can be further nested. This follows the model of IFLA_AF_SPEC on RTM_*LINK messages and it has the advantage of presenting an easily extended hierarchy. The rtnl_af_ops structure is extended to provide AFs with the opportunity to fill and provide the size of their stats attributes. One alternative would have been to provide AFs with the ability to add attributes directly into the RTM_GETSTATS message without a nested hierarchy. I discounted this approach as it increases the rate at which the 32 attribute number space is used up and it makes implementation a little more tricky for stats dump resuming (at the moment the order in which attributes are added to the message has to match the numeric order of the attributes). Another alternative would have been to register per-AF RTM_GETSTATS handlers. I discounted this approach as I perceived a common use-case to be getting all the stats for an interface and this approach would necessitate multiple requests/dumps to retrieve them all. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Julia Lawall authored
The function stmmac_dt_phy provides several possibilities for initializing plat->mdio_node, all of which have the effect of increasing the reference count of the assigned value. This field is not updated elsewhere, so the value is live until the end of the lifetime of plat (devm_allocated), just after the end of stmmac_remove_config_dt. Thus, add an of_node_put on plat->mdio_node in stmmac_remove_config_dt. It is possible that the field mdio_node is never initialized, but of_node_put is NULL-safe, so it is also safe to call of_node_put in that case. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Rolf Neugebauer authored
This patch part reverts fd2a0437 and e858fae2 which introduced a subtle change in how the virtio_net flags are derived from the SKBs ip_summed field. With the above commits, the flags are set to VIRTIO_NET_HDR_F_DATA_VALID when ip_summed == CHECKSUM_UNNECESSARY, thus treating it differently to ip_summed == CHECKSUM_NONE, which should be the same. Further, the virtio spec 1.0 / CS04 explicitly says that VIRTIO_NET_HDR_F_DATA_VALID must not be set by the driver. Fixes: fd2a0437 ("virtio_net: introduce virtio_net_hdr_{from,to}_skb") Fixes: e858fae2 (" virtio_net: use common code for virtio_net_hdr and skb GSO conversion") Signed-off-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle multicast packets properly in fast-RX path of mac80211, from Johannes Berg. 2) Because of a logic bug, the user can't actually force SW checksumming on r8152 devices. This makes diagnosis of hw checksumming bugs really annoying. Fix from Hayes Wang. 3) VXLAN route lookup does not take the source and destination ports into account, which means IPSEC policies cannot be matched properly. Fix from Martynas Pumputis. 4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger. 5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky. 6) If lwtunnel_fill_encap() fails, we do not abort the netlink message construction properly in fib_dump_info(), from David Ahern. 7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan Schmidt. 8) Openvswitch conntack actions need to maintain a correct checksum, fix from Lance Richardson. 9) ax25_disconnect() is missing a check for ax25->sk being NULL, in fact it already checks this, but not in all of the necessary spots. Fix from Basil Gunn. 10) Action GET operations in the packet scheduler can erroneously bump the reference count of the entry, making it unreleasable. Fix from Jamal Hadi Salim. Jamal gives a great set of example command lines that trigger this in the commit message. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) net sched actions: fix refcnt when GETing of action after bind net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions net/mlx4_core: Fix racy CQ (Completion Queue) free net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered net/mlx5e: Fix a -Wmaybe-uninitialized warning ax25: Fix segfault after sock connection timeout bpf: rework prog_digest into prog_tag tipc: allocate user memory with GFP_KERNEL flag net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types ip6_tunnel: Account for tunnel header in tunnel MTU mld: do not remove mld souce list info when set link down be2net: fix MAC addr setting on privileged BE3 VFs be2net: don't delete MAC on close on unprivileged BE3 VFs be2net: fix status check in be_cmd_pmac_add() cpmac: remove hopeless #warning ravb: do not use zero-length alignment DMA descriptor mlx4: do not call napi_schedule() without care openvswitch: maintain correct checksum state in conntrack actions tcp: fix tcp_fastopen unaligned access complaints on sparc ... -
Linus Torvalds authored
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "A tiny fix to make sure that page-sized mappings are page-aligned (and not say straddle two pages). This is important for some drivers (such as NVME)" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: ensure that page-sized mappings are page-aligned
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - fix regressions detecting HS/HS DDR eMMC cards related to CMD6 MMC host: - mmc: mxs-mmc: Fix additional cycles after transmission stop - sdhci-acpi: Only powered up enabled acpi child devices - meson: avoid possible NULL dereference" * tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: Restore parts of the polling policy when switch to HS/HS DDR mmc: mxs-mmc: Fix additional cycles after transmission stop mmc: sdhci-acpi: Only powered up enabled acpi child devices MMC: meson: avoid possible NULL dereference
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD fixes from Brian Norris: "Just NAND updates from Boris: - avoid compiling xway NAND controller driver as a module (which didn't work) - fix tango NAND DT binding and make sure the controller is in a clean state at probe time - add dependency on HAS_IOMEM to the oxnas NAND driver - fix irq number validity check in the lpc32xx driver" * tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd: mtd: nand: lpc32xx: fix invalid error handling of a requested irq mtd: nand: tango: Reset pbus to raw mode in probe mtd: nand: tango: Update DT binding description mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM mtd: nand: xway: fix build because of module functions mtd: nand: xway: disable module support -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
