Skip to content

L
linux
Switch branch/tag
  1. 28 Jun, 2017 1 commit
    • Lv Zheng's avatar
      ACPI: EC: Fix an EC event IRQ storming issue · 1ab69f27
      Lv Zheng authored 
      The EC event IRQ (SCI_EVT) can only be handled by submitting QR_EC. As the
EC driver handles SCI_EVT in a workqueue, after SCI_EVT is flagged and
before QR_EC is submitted, there is a period risking IRQ storming. EC IRQ
must be masked for this period but linux EC driver never does so.

No end user notices the IRQ storming and no developer fixes this known
issue because:

 1. The EC IRQ is always edge triggered GPE, and
 2. The kernel can execute no-op EC IRQ handler very fast.

For edge-triggered EC GPE platforms, it is only reported of post-resume EC
event lost issues, there won't be an IRQ storming. For level triggered EC
GPE platforms, fortunately the kernel is always fast enough to execute such
a no-op EC IRQ handler so that the IRQ handler won't be accumulated to
starve the task contexts, causing a real IRQ storming.

But the IRQ storming actually can still happen when:

 1. The EC IRQ performs like level triggered GPE, and
 2. The kernel EC debugging log is turned on but the console is slow enough.

There are more and more platforms using EC GPE as wake GPE where the EC GPE
is likely designed as level triggered. Then when EC debugging log is
enabled, the EC IRQ handler is no longer a no-op but dumps IRQ status to
the consoles. If the consoles are slow enough, the EC IRQs can arrive much
faster than executing the handler. Finally the accumulated EC event IRQ
handlers starve the task contexts, causing the IRQ storming to occur, and
the kernel hangs can be observed during boot/resume.

This patch fixes this issue by masking EC IRQ for this period:

 1. Begins when there is an SCI_EVT IRQ pending, and
 2. Ends when there is a QR_EC completed (SCI_EVT acknowledged).
Tested-by: default avatarWang Wendy <wendy.wang@intel.com>
Tested-by: default avatarFeng Chenzhou <chenzhoux.feng@intel.com>
Signed-off-by: default avatarLv Zheng <lv.zheng@intel.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      1ab69f27
  3. 26 Jun, 2017 1 commit
  5. 25 Jun, 2017 6 commits
  7. 24 Jun, 2017 11 commits
  9. 23 Jun, 2017 15 commits
  11. 22 Jun, 2017 6 commits
    • Randy Dunlap's avatar
      kconfig: fix sparse warnings in nconfig · ad818106
      Randy Dunlap authored 
      Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):

../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer

nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      ad818106
    • Björn Töpel's avatar
      perf probe: Fix probe definition for inlined functions · 7598f8bc
      Björn Töpel authored 
      In commit 613f050d ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.

Prior this patch:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626

After:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665

Committer testing:

Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:

  # pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
  __ew32
  e1000_regdump
  e1000e_dump_ps_pages
  e1000_desc_unused
  e1000e_systim_to_hwtstamp
  e1000e_rx_hwtstamp
  e1000e_update_rdt_wa
  e1000e_update_tdt_wa
  e1000_put_txbuf
  e1000_consume_page

Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:

  $ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
  <SNIP>
  <1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
    <13e27c>   DW_AT_name        : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
    <13e287>   DW_AT_low_pc      : 0x17a30
  <3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e6f0>   DW_AT_abstract_origin: <0x13ed2c>
    <13e6f4>   DW_AT_low_pc      : 0x17be6
  <SNIP>
  <1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
     <13ed2e>   DW_AT_name        : (indirect string, offset: 0xa54c3): e1000_consume_page

So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:

  0x17be6 - 0x17a30 = 438

but above we have 876, which is twice as much.

Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

  <3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e86f>   DW_AT_abstract_origin: <0x13ed2c>
    <13e873>   DW_AT_low_pc      : 0x17d21

  0x17d21 - 0x17a30 = 753

So we where adding it at twice the offset from the containing function as we
should.

And then after this patch:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
  #

Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:

  readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
   673: 0000000000017a30  1626 FUNC    LOCAL  DEFAULT    2 e1000_clean_jumbo_rx_irq
   674: 0000000000018090  2013 FUNC    LOCAL  DEFAULT    2 e1000_clean_rx_irq_ps

This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

   <3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13ec78>   DW_AT_abstract_origin: <0x13ed2c>
    <13ec7c>   DW_AT_low_pc      : 0x17f79

  0x17f79 - 0x17a30 = 1353

 So:

   0x17a30 + 2 * 1353 = 0x184c2

  And:

   0x184c2 - 0x18090 = 1074

Which explains the bogus third expansion for e1000_consume_page() to end up at:

   p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

All fixed now :-)

[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/Signed-off-by: default avatarBjörn Töpel <bjorn.topel@intel.com>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: default avatarMagnus Karlsson <magnus.karlsson@intel.com>
Acked-by: default avatarMasami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 613f050d ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      7598f8bc
    • Linus Torvalds's avatar
      Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6 · a38371cb
      Linus Torvalds authored 
      Pull cifs fixes from Steve French:
 "Various small fixes for stable"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix some return values in case of error in 'crypt_message'
  cifs: remove redundant return in cifs_creation_time_get
  CIFS: Improve readdir verbosity
  CIFS: check if pages is null rather than bv for a failed allocation
  CIFS: Set ->should_dirty in cifs_user_readv()
      a38371cb
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 3f7ba7e1
      Linus Torvalds authored 
      Pull KVM fixes from Radim Krčmář:
 "MIPS:
   - Fix build with KVM, DYNAMIC_DEBUG and JUMP_LABEL.

  PPC:
   - Fix host crashes/hangs on POWER9.
   - Properly restore userspace state after KVM_RUN ioctl.

  s390:
   - Fix address translation in odd-ball cases (real-space designation
     ASCEs).

  x86:
   - Fix privilege escalation in 64-bit Windows guests

  All patches are for stable and the x86 also has a CVE"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix singlestepping over syscall
  KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows
  KVM: MIPS: Fix maybe-uninitialized build failure
  KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1
  KVM: PPC: Book3S HV: Save/restore host values of debug registers
  KVM: PPC: Book3S HV: Preserve userspace HTM state properly
  KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
  KVM: PPC: Book3S HV: Context-switch EBB registers properly
  KVM: PPC: Book3S HV: Cope with host using large decrementer mode
      3f7ba7e1
    • Linus Torvalds's avatar
      Merge tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd · 4f92f0e2
      Linus Torvalds authored 
      Pull MFD fixes from Lee Jones:

 - arizona: use address passed in, rather than hard coded value

 - correct STM32 clock-names value in DT binding documentation

* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  dt-bindings: mfd: Update STM32 timers clock names
  mfd: arizona: Fix typo using hard-coded register
      4f92f0e2
    • Paolo Bonzini's avatar
      KVM: x86: fix singlestepping over syscall · c8401dda
      Paolo Bonzini authored 
      TF is handled a bit differently for syscall and sysret, compared
to the other instructions: TF is checked after the instruction completes,
so that the OS can disable #DB at a syscall by adding TF to FMASK.
When the sysret is executed the #DB is taken "as if" the syscall insn
just completed.

KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
Fix the behavior, otherwise you could get #DB on a user stack which is not
nice.  This does not affect Linux guests, as they use an IST or task gate
for #DB.

This fixes CVE-2017-7518.

Cc: stable@vger.kernel.org
Reported-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarRadim Krčmář <rkrcmar@redhat.com>
      c8401dda
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7