- 22 Mar, 2018 40 commits
-
-
Subhransu S. Prusty authored
[ Upstream commit 12ee4022 ] Geminilake is Skylake family platform. So add it's id to skl_plus check. Fixes: 126cfa2f ("ALSA: hda: Add Geminilake HDMI codec ID") Signed-off-by:
Subhransu S. Prusty <subhransu.s.prusty@intel.com> Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hannes Reinecke authored
[ Upstream commit 97d27b0d ] sg_remove_sfp_usercontext() is clearing any sg requests, but needs to take 'rq_list_lock' when modifying the list. Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 28676d86 ] Check for a valid direction before starting the request, otherwise we risk running into an assertion in the scsi midlayer checking for valid requests. [mkp: fixed typo] Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 3393af24 ] This adds missing checking for kzalloc() return value. Fixes: 4b6fad70 ("powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit 1282ba7f ] The existing SPAPR TCE driver advertises both VFIO_SPAPR_TCE_IOMMU and VFIO_SPAPR_TCE_v2_IOMMU types to the userspace and the userspace usually picks the v2. Normally the userspace would create a container, attach an IOMMU group to it and only then set the IOMMU type (which would normally be v2). However a specific IOMMU group may not support v2, in other words it may not implement set_window/unset_window/take_ownership/ release_ownership and such a group should not be attached to a v2 container. This adds extra checks that a new group can do what the selected IOMMU type suggests. The userspace can then test the return value from ioctl(VFIO_SET_IOMMU, VFIO_SPAPR_TCE_v2_IOMMU) and try VFIO_SPAPR_TCE_IOMMU. Signed-off-by:
-
David Carrillo-Cisneros authored
[ Upstream commit 0973ad97 ] Session sets a number parameters that rely on evlist. These parameters are not used in pipe-mode and should not be set, since evlist is unavailable. Fix that. Signed-off-by:
David Carrillo-Cisneros <davidcc@google.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170410201432.24807-6-davidcc@google.com [ Check if file != NULL in perf_session__new(), like when used by builtin-top.c ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Fugang Duan authored
[ Upstream commit 9269e556 ] Many boards use i2c/spi expander gpio as phy-reset-gpios and these gpios maybe registered after fec port, driver should check the return value of .of_get_named_gpio(). Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Carrillo-Cisneros authored
[ Upstream commit 1e0d4f02 ] __perf_session__process_pipe_events reuses the same memory buffer to process all events in the pipe. When reordering is needed (e.g. -b option), events are not immediately flushed, but kept around until reordering is possible, causing memory corruption. The problem is usually observed by a "Unknown sample error" output. It can easily be reproduced by: perf record -o - noploop | perf inject -b > output Committer testing: Before: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [8297] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [8297] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] Warning: Found 1 unknown events! Is this an older tool processing a perf.data file generated by a more recent tool? If that is not the case, consider reporting to linux-kernel@vger.kernel.org. $ After: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [9027] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [9027] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] no symbols found in /usr/bin/stress, maybe install a debug package? no symbols found in /usr/bin/stress, maybe install a debug package? $ Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 76541370 ] In armpmu_dispatch_irq() we look at arm_pmu::plat_device to acquire platdata, so that we can defer to platform-specific IRQ handling, required on some 32-bit parts. With the advent of ACPI we won't always have a platform_device, and so we must avoid trying to dereference fields from it. This patch fixes up armpmu_dispatch_irq() to avoid doing so, introducing a new armpmu_get_platdata() helper. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Jeremy Linton <jeremy.linton@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 5cddd05c ] When receiving a frame, we currently pull in sizeof(*hdr) plus some extra (crypto/snap), which is too much, most headers aren't actually sizeof(*hdr) since that takes into account the 4-address format but doesn't take into account QoS. As a result, a typical frame will have 4 bytes of the payload in the SKB header already. Fix this by calculating the correct header length, and now that we have that, align the end of the SKB header to a multiple of 4 so that the IP header will be aligned properly when pulled in. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jin Yao authored
[ Upstream commit 32ccb130 ] The kernel has a special check for a specific irq_vectors trace event. TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0); The perf-record fails for this irq_vectors event when it is present, like when using a wildcard: root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2 Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The current value is 2: -1: Allow use of (almost) all events by all users >= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN To make this setting permanent, edit /etc/sysctl.conf too, e.g.: kernel.perf_event_paranoid = -1 This patch prints out the exact sub event that failed with EPERM for wildcards to help in understanding what went wrong when this event is present: After the patch: root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2 Error: No permission to enable irq_vectors:irq_work_exit event. You may not have permission to collect system-wide stats. ...... Committer notes: So we have a lot of irq_vectors events: [root@jouet ~]# perf list irq_vectors:* List of pre-defined events (to be used in -e): irq_vectors:call_function_entry [Tracepoint event] irq_vectors:call_function_exit [Tracepoint event] irq_vectors:call_function_single_entry [Tracepoint event] irq_vectors:call_function_single_exit [Tracepoint event] irq_vectors:deferred_error_apic_entry [Tracepoint event] irq_vectors:deferred_error_apic_exit [Tracepoint event] irq_vectors:error_apic_entry [Tracepoint event] irq_vectors:error_apic_exit [Tracepoint event] irq_vectors:irq_work_entry [Tracepoint event] irq_vectors:irq_work_exit [Tracepoint event] irq_vectors:local_timer_entry [Tracepoint event] irq_vectors:local_timer_exit [Tracepoint event] irq_vectors:reschedule_entry [Tracepoint event] irq_vectors:reschedule_exit [Tracepoint event] irq_vectors:spurious_apic_entry [Tracepoint event] irq_vectors:spurious_apic_exit [Tracepoint event] irq_vectors:thermal_apic_entry [Tracepoint event] irq_vectors:thermal_apic_exit [Tracepoint event] irq_vectors:threshold_apic_entry [Tracepoint event] irq_vectors:threshold_apic_exit [Tracepoint event] irq_vectors:x86_platform_ipi_entry [Tracepoint event] irq_vectors:x86_platform_ipi_exit [Tracepoint event] # And some may be sampled: [root@jouet ~]# perf record -e irq_vectors:local* sleep 20s [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (2 samples) ] [root@jouet ~]# perf report -D | egrep 'stats:|events:' Aggregated stats: TOTAL events: 155 MMAP events: 144 COMM events: 2 EXIT events: 1 SAMPLE events: 2 MMAP2 events: 4 FINISHED_ROUND events: 1 TIME_CONV events: 1 irq_vectors:local_timer_entry stats: TOTAL events: 1 SAMPLE events: 1 irq_vectors:local_timer_exit stats: TOTAL events: 1 SAMPLE events: 1 [root@jouet ~]# But, as shown in the tracepoint definition at the start of this message, some, like "irq_vectors:irq_work_exit", may not be sampled, just counted, i.e. if we try to sample, as when using 'perf record', we get an error: [root@jouet ~]# perf record -e irq_vectors:irq_work_exit Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> The error message is misleading, this patch will help in pointing out what is the event causing such an error, but the error message needs improvement, i.e. we need to figure out a way to check if a tracepoint is counting only, like this one, when all we can do is to count it with 'perf stat', at most printing the delta using interval printing, as in: [root@jouet ~]# perf stat -I 5000 -e irq_vectors:irq_work_* # time counts unit events 5.000168871 0 irq_vectors:irq_work_entry 5.000168871 0 irq_vectors:irq_work_exit 10.000676730 0 irq_vectors:irq_work_entry 10.000676730 0 irq_vectors:irq_work_exit 15.001122415 0 irq_vectors:irq_work_entry 15.001122415 0 irq_vectors:irq_work_exit 20.001298051 0 irq_vectors:irq_work_entry 20.001298051 0 irq_vectors:irq_work_exit 25.001485020 1 irq_vectors:irq_work_entry 25.001485020 1 irq_vectors:irq_work_exit 30.001658706 0 irq_vectors:irq_work_entry 30.001658706 0 irq_vectors:irq_work_exit ^C 32.045711878 0 irq_vectors:irq_work_entry 32.045711878 0 irq_vectors:irq_work_exit [root@jouet ~]# But at least, when we use a wildcard, this patch helps a bit. Signed-off-by:
Yao Jin <yao.jin@linux.intel.com> Tested-by:
-
Yuyang Du authored
[ Upstream commit 9f20dfb4 ] This fixes the commit: 1cd8fd28 ("usb: gadget: dummy_hcd: add SuperSpeed support"). In the case of ClearPortFeature and USB_PORT_FEAT_POWER, simply clear the right bit regardless of what the wValue is. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
John Stultz authored
[ Upstream commit dad3f793 ] I had seen some odd behavior with HiKey's usb-gadget interface that I finally seemed to have chased down. Basically every other time I plugged in the OTG port, the gadget interface would properly initialize. The other times, I'd get a big WARN_ON in dwc2_hsotg_init_fifo() about the fifo_map not being clear. Ends up if we don't disconnect the gadget state, the fifo-map doesn't get cleared properly, which causes WARN_ON messages and also results in the device not properly being setup as a gadget every other time the OTG port is connected. So this patch adds a call to dwc2_hsotg_disconnect() in the reset path so the state is properly cleared. With it, the gadget interface initializes properly on every plug in. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 4868e350 ] setup_initial_memory_limit() is called from early_init_devtree(), which runs prior to feature patching. If the kernel is built with CONFIG_JUMP_LABEL=y and CONFIG_JUMP_LABEL_FEATURE_CHECKS=y then we will potentially get the wrong value. If we also have CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG=y we get a warning and backtrace: Warning! mmu_has_feature() used prior to jump label init! CPU: 0 PID: 0 Comm: swapper Not tainted 4.11.0-rc4-gccN-next-20170331-g6af2434c #1 Call Trace: [c000000000fc3d50] [c000000000a26c30] .dump_stack+0xa8/0xe8 (unreliable) [c000000000fc3de0] [c00000000002e6b8] .setup_initial_memory_limit+0xa4/0x104 [c000000000fc3e60] [c000000000d5c23c] .early_init_devtree+0xd0/0x2f8 [c000000000fc3f00] [c000000000d5d3b0] .early_setup+0x90/0x11c [c000000000fc3f90] [c000000000000520] start_here_multiplatform+0x68/0x80 Fix it by using early_mmu_has_feature(). Fixes: c12e6f24 ("powerpc: Add option to use jump label for mmu_has_feature()") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Zhilong Liu authored
[ Upstream commit b670883b ] md.c: it needs to release the mddev lock before the array_size_store() returns. Fixes: ab5a98b1 ("md-cluster: change array_sectors and update size are not supported") Signed-off-by:
Zhilong Liu <zlliu@suse.com> Reviewed-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 7471fb77 ] When recoverying a single missing/failed device in a RAID6, those stripes where the Q block is on the missing device are handled a bit differently. In these cases it is easy to check that the P block is correct, so we do. This results in the P block be destroy. Consequently the P block needs to be read a second time in order to compute Q. This causes lots of seeks and hurts performance. It shouldn't be necessary to re-read P as it can be computed from the DATA. But we only compute blocks on missing devices, since c337869d ("md: do not compute parity unless it is on a failed drive"). So relax the change made in that commit to allow computing of the P block in a RAID6 which it is the only missing that block. This makes RAID6 recovery run much faster as the disk just "before" the recovering device is no longer seeking back-and-forth. Reported-by-tested-by:
Brad Campbell <lists2009@fnarfbargle.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Vincent Stehlé authored
[ Upstream commit 0c08aaf8 ] ISL9305_MAX_REGULATOR is the last index used to access the init_data[] array, so we need to add one to this last index to obtain the necessary array size. This fixes the following smatch error: drivers/regulator/isl9305.c:160 isl9305_i2c_probe() error: buffer overflow 'pdata->init_data' 3 <= 3 Fixes: dec38b5c ("regulator: isl9305: Add Intersil ISL9305/H driver") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit 1531a208 ] The DRM object does not register the pipe with the WPF object. This is used internally throughout the driver as a means of accessing the pipe. As such this breaks operations which require access to the pipe from WPF interrupts. Register the pipe inside the WPF object after it has been declared as the output. Fixes: ff7e97c9 ("[media] v4l: vsp1: Store pipeline pointer in rwpf") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit 4461c84b ] With multiple inputs through the BRU it is feasible for the streams to race each other at stream-on. Multiple VIDIOC_STREAMON calls racing each other could have process N-1 skipping over the pipeline setup section and then start the pipeline early, if videobuf2 has already enqueued buffers to the driver for process N but not called the .start_streaming() operation yet In the case of the video pipelines, this can present two serious issues. 1) A null-dereference if the pipe->dl is committed at the same time as the vsp1_video_setup_pipeline() is processing 2) A hardware hang, where a display list is committed without having called vsp1_video_setup_pipeline() first Repair this issue, by ensuring that only the stream which configures the pipeline is able to start it. Signed-off-by:
-
Aleksandar Markovic authored
[ Upstream commit 411dac79 ] Add missing clearing of BLTZALL and BGEZALL emulation counters in function mipsr2_stats_clear_show(). Previously, it was not possible to reset BLTZALL and BGEZALL emulation counters - their value remained the same even after explicit request via debugfs. As far as other related counters are concerned, they all seem to be properly cleared. This change affects debugfs operation only, core R2 emulation functionality is not affected. Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: james.hogan@imgtec.com Cc: leonid.yegoshin@imgtec.com Cc: douglas.leung@imgtec.com Cc: petar.jovanovic@imgtec.com Cc: miodrag.dinic@imgtec.com Cc: goran.ferenc@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15517/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Leonid Yegoshin authored
[ Upstream commit 5bba7aa4 ] Fix the problem of inaccurate identification of instructions BLEZL and BGTZL in R2 emulation code by making sure all necessary encoding specifications are met. Previously, certain R6 instructions could be identified as BLEZL or BGTZL. R2 emulation routine didn't take into account that both BLEZL and BGTZL instructions require their rt field (bits 20 to 16 of instruction encoding) to be 0, and that, at same time, if the value in that field is not 0, the encoding may represent a legitimate MIPS R6 instruction. This means that a problem could occur after emulation optimization, when emulation routine tried to pipeline emulation, picked up a next candidate, and subsequently misrecognized an R6 instruction as BLEZL or BGTZL. It should be said that for single pass strategy, the problem does not happen because CPU doesn't trap on branch-compacts which share opcode space with BLEZL/BGTZL (but have rt field != 0, of course). Signed-off-by:
Leonid Yegoshin <leonid.yegoshin@imgtec.com> Signed-off-by:
Miodrag Dinic <miodrag.dinic@imgtech.com> Signed-off-by:
Aleksandar Markovic <aleksandar.markovic@imgtech.com> Reported-by:
Douglas Leung <douglas.leung@imgtec.com> Reviewed-by:
-
David Daney authored
[ Upstream commit a81507c7 ] o Socket data is unsigned, so use unsigned accessors instructions. o Fix path result pointer generation arithmetic. o Fix half-word byte swapping code for unsigned semantics. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15747/Signed-off-by:
-
David Daney authored
[ Upstream commit 1ef0910c ] If bpf_needs_clear_a() returns true, only actually clear it if it is ever used. If it is not used, we don't save and restore it, so the clearing has the nasty side effect of clobbering caller state. Also, don't emit stack pointer adjustment instructions if the adjustment amount is zero. Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit e61c38d8 ] If the UART is operated in DTE mode and UCR3_DCD or UCR3_RI are 1 (which is the reset default) and the opposite side pulls the respective line to its active level the irq triggers after it is requested in .probe. These irqs were already disabled in .startup but this might be too late. Also setup of the UFCR_DCEDTE bit (currently done in .set_termios) is done very late which is critical as it also controls direction of some pins. So setup UFCR_DCEDTE earlier (in .probe) and also disable the broken irqs in DTE mode there before requesting irqs. Acked-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Jayachandran C authored
[ Upstream commit 7d05587c ] On SMP systems, we see a lot of spurious TX interrupts when a program generates a steady stream of output to the pl011 UART. The problem can be easily seen when one CPU generates the output while another CPU handles the pl011 interrupts, and the rate of output is low enough not to fill the TX FIFO. The problem seems to be: -- CPU a -- -- CPU b -- (take port lock) pl011_start_tx pl011_start_tx_pio enable TXIM in REG_IMSC -> causes uart tx intr (pl011_int) pl011_tx_chars pl011_int ...tx chars, all done... (wait for port lock) pl011_stop_tx . disable TXIM . (release port lock) -> (take port lock) check for TXIM, not enabled (release port lock) return IRQ_NONE Enabling the TXIM in pl011_start_tx_pio() causes the interrupt to be generated and delivered to CPU b, even though pl011_tx_chars() is able to complete the TX and then disable the tx interrupt. Fix this by enabling TXIM only after pl011_tx_chars, if it is needed. pl011_tx_chars will return a boolean indicating whether the TX interrupts have to be enabled. Debugged-by:
Vijaya Kumar <Vijaya.Kumar@cavium.com> Signed-off-by:
Jayachandran C <jnair@caviumnetworks.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 7064dc7f ] I ran into a link error on ARM64 for lkdtm_rodata_do_nothing: drivers/misc/built-in.o: In function `lkdtm_rodata_do_nothing': :(.rodata+0x68c8): relocation truncated to fit: R_AARCH64_CALL26 against symbol `__sanitizer_cov_trace_pc' defined in .text section in kernel/built-in.o I did not analyze this further, but my theory is that we would need a trampoline to call __sanitizer_cov_trace_pc(), but the linker (correctly) only adds trampolines for callers in executable sections. Disabling KCOV for this one file avoids the build failure with no other practical downsides I can think of. The problem can only happen on kernels that contain both kcov and lkdtm, so if we want to backport this, it should be in the earliest version that has both (v4.8). Fixes: 5c9a8750 ("kernel: add kcov code coverage") Fixes: 9a49a528 ("lkdtm: add function for testing .rodata section") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Mike Leach authored
[ Upstream commit eeedc542 ] Corrected to get the port numbering to allow programmable replicator driver to operate correctly. By convention, CoreSight devices number ports, not endpoints in the .dts files:- port { reg<N> endpoint { } } Existing code read endpoint number - always 0x0, rather than the correct port number. Signed-off-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Mitch Williams authored
[ Upstream commit 004eb614 ] The client interface is only intended for use on devices that support iWarp. Only register with the client if this is the case. This fixes a panic when loading i40iw on X710 devices. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Reported-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jeffy Chen authored
[ Upstream commit 5e570373 ] We're trying to access vop registers here, so need to make sure the pm domain is on. Normally it should be enabled by the bootloader, but there's no guarantee of it. And if we wanna do unbind/bind, it would also cause the device to hang. And this patch also does these: 1/ move vop_initial to the end of vop_bind for eaiser error handling. 2/ correct the err_put_pm_runtime of vop_enable. Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-8-git-send-email-jeffy.chen@rock-chips.comSigned-off-by:
-
Christopher James Halse Rogers authored
[ Upstream commit 1769152a ] Any use of the framebuffer will migrate it to VRAM, which is not sensible for an imported dma-buf. v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Christopher James Halse Rogers <christopher.halse.rogers@canonical.com> CC: amd-gfx@lists.freedesktop.org Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christopher James Halse Rogers authored
[ Upstream commit a294043b ] Any use of the framebuffer will migrate it to VRAM, which is not sensible for an imported dma-buf. v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg. Reviewed-by:
-
Liam Beguin authored
[ Upstream commit 9a1c779e ] This patch forces the frambuffer size to be aligned on kernel pages. During the board startup, the splash screed did appear; the "ts_test" program or our application were not able to start. The following error message was reported: error: failed to map framebuffer device to memory. LinuxFB: driver cannot connect The issue was discovered, on the LPC32xx platform, during the migration of the LCD definition from the board file to the device tree. Signed-off-by:
Liam Beguin <lbeguin@tycoint.com> Signed-off-by:
Sylvain Lemieux <slemieux@tycoint.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Jim Mattson authored
[ Upstream commit 28d06353 ] The userspace exception injection API and code path are entirely unprepared for exceptions that might cause a VM-exit from L2 to L1, so the best course of action may be to simply disallow this for now. 1. The API provides no mechanism for userspace to specify the new DR6 bits for a #DB exception or the new CR2 value for a #PF exception. Presumably, userspace is expected to modify these registers directly with KVM_SET_SREGS before the next KVM_RUN ioctl. However, in the event that L1 intercepts the exception, these registers should not be changed. Instead, the new values should be provided in the exit_qualification field of vmcs12 (Intel SDM vol 3, section 27.1). 2. In the case of a userspace-injected #DB, inject_pending_event() clears DR7.GD before calling vmx_queue_exception(). However, in the event that L1 intercepts the exception, this is too early, because DR7.GD should not be modified by a #DB that causes a VM-exit directly (Intel SDM vol 3, section 27.1). 3. If the injected exception is a #PF, nested_vmx_check_exception() doesn't properly check whether or not L1 is interested in the associated error code (using the #PF error code mask and match fields from vmcs12). It may either return 0 when it should call nested_vmx_vmexit() or vice versa. 4. nested_vmx_check_exception() assumes that it is dealing with a hardware-generated exception intercept from L2, with some of the relevant details (the VM-exit interruption-information and the exit qualification) live in vmcs02. For userspace-injected exceptions, this is not the case. 5. prepare_vmcs12() assumes that when its exit_intr_info argument specifies valid information with a valid error code that it can VMREAD the VM-exit interruption error code from vmcs02. For userspace-injected exceptions, this is not the case. Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 74f16909 ] MCG_CAP[63:9] bits are reserved on AMD. However, on an AMD guest, this MSR returns 0x100010a. More specifically, bit 24 is set, which is simply wrong. That bit is MCG_SER_P and is present only on Intel. Thus, clean up the reserved bits in order not to confuse guests. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Nate Watterson authored
[ Upstream commit 5016bdb7 ] Normally, calling alloc_iova() using an iova_domain with insufficient pfns remaining between start_pfn and dma_limit will fail and return a NULL pointer. Unexpectedly, if such a "full" iova_domain contains an iova with pfn_lo == 0, the alloc_iova() call will instead succeed and return an iova containing invalid pfns. This is caused by an underflow bug in __alloc_and_insert_iova_range() that occurs after walking the "full" iova tree when the search ends at the iova with pfn_lo == 0 and limit_pfn is then adjusted to be just below that (-1). This (now huge) limit_pfn gives the impression that a vast amount of space is available between it and start_pfn and thus a new iova is allocated with the invalid pfn_hi value, 0xFFF.... . To rememdy this, a check is introduced to ensure that adjustments to limit_pfn will not underflow. This issue has been observed in the wild, and is easily reproduced with the following sample code. struct iova_domain *iovad = kzalloc(sizeof(*iovad), GFP_KERNEL); struct iova *rsvd_iova, *good_iova, *bad_iova; unsigned long limit_pfn = 3; unsigned long start_pfn = 1; unsigned long va_size = 2; init_iova_domain(iovad, SZ_4K, start_pfn, limit_pfn); rsvd_iova = reserve_iova(iovad, 0, 0); good_iova = alloc_iova(iovad, va_size, limit_pfn, true); bad_iova = alloc_iova(iovad, va_size, limit_pfn, true); Prior to the patch, this yielded: *rsvd_iova == {0, 0} /* Expected */ *good_iova == {2, 3} /* Expected */ *bad_iova == {-2, -1} /* Oh no... */ After the patch, bad_iova is NULL as expected since inadequate space remains between limit_pfn and start_pfn after allocating good_iova. Signed-off-by:
Nate Watterson <nwatters@codeaurora.org> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
John Johansen authored
[ Upstream commit 622f6e32 ] The path_max parameter determines the max size of buffers allocated but it should not be setable at run time. If can be used to cause an oops root@ubuntu:~# echo 16777216 > /sys/module/apparmor/parameters/path_max root@ubuntu:~# cat /sys/module/apparmor/parameters/path_max Killed [ 122.141911] BUG: unable to handle kernel paging request at ffff880080945fff [ 122.143497] IP: [<ffffffff81228844>] d_absolute_path+0x44/0xa0 [ 122.144742] PGD 220c067 PUD 0 [ 122.145453] Oops: 0002 [#1] SMP [ 122.146204] Modules linked in: vmw_vsock_vmci_transport vsock ppdev vmw_balloon snd_ens1371 btusb snd_ac97_codec gameport snd_rawmidi btrtl snd_seq_device ac97_bus btbcm btintel snd_pcm input_leds bluetooth snd_timer snd joydev soundcore serio_raw coretemp shpchp nfit parport_pc i2c_piix4 8250_fintek vmw_vmci parport mac_hid ib_iser rdma_cm iw_cm ib_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd vmwgfx psmouse mptspi ttm mptscsih drm_kms_helper mptbase syscopyarea scsi_transport_spi sysfillrect [ 122.163365] ahci sysimgblt e1000 fb_sys_fops libahci drm pata_acpi fjes [ 122.164747] CPU: 3 PID: 1501 Comm: bash Not tainted 4.4.0-59-generic #80-Ubuntu [ 122.166250] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 122.168611] task: ffff88003496aa00 ti: ffff880076474000 task.ti: ffff880076474000 [ 122.170018] RIP: 0010:[<ffffffff81228844>] [<ffffffff81228844>] d_absolute_path+0x44/0xa0 [ 122.171525] RSP: 0018:ffff880076477b90 EFLAGS: 00010206 [ 122.172462] RAX: ffff880080945fff RBX: 0000000000000000 RCX: 0000000001000000 [ 122.173709] RDX: 0000000000ffffff RSI: ffff880080946000 RDI: ffff8800348a1010 [ 122.174978] RBP: ffff880076477bb8 R08: ffff880076477c80 R09: 0000000000000000 [ 122.176227] R10: 00007ffffffff000 R11: ffff88007f946000 R12: ffff88007f946000 [ 122.177496] R13: ffff880076477c80 R14: ffff8800348a1010 R15: ffff8800348a2400 [ 122.178745] FS: 00007fd459eb4700(0000) GS:ffff88007b6c0000(0000) knlGS:0000000000000000 [ 122.180176] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 122.181186] CR2: ffff880080945fff CR3: 0000000073422000 CR4: 00000000001406e0 [ 122.182469] Stack: [ 122.182843] 00ffffff00000001 ffff880080946000 0000000000000000 0000000000000000 [ 122.184409] 00000000570f789c ffff880076477c30 ffffffff81385671 ffff88007a2e7a58 [ 122.185810] 0000000000000000 ffff880076477c88 01000000008a1000 0000000000000000 [ 122.187231] Call Trace: [ 122.187680] [<ffffffff81385671>] aa_path_name+0x81/0x370 [ 122.188637] [<ffffffff813875dd>] profile_transition+0xbd/0xb80 [ 122.190181] [<ffffffff811af9bc>] ? zone_statistics+0x7c/0xa0 [ 122.191674] [<ffffffff81389b20>] apparmor_bprm_set_creds+0x9b0/0xac0 [ 122.193288] [<ffffffff812e1971>] ? ext4_xattr_get+0x81/0x220 [ 122.194793] [<ffffffff812e800c>] ? ext4_xattr_security_get+0x1c/0x30 [ 122.196392] [<ffffffff813449b9>] ? get_vfs_caps_from_disk+0x69/0x110 [ 122.198004] [<ffffffff81232d4f>] ? mnt_may_suid+0x3f/0x50 [ 122.199737] [<ffffffff81344b03>] ? cap_bprm_set_creds+0xa3/0x600 [ 122.201377] [<ffffffff81346e53>] security_bprm_set_creds+0x33/0x50 [ 122.203024] [<ffffffff81214ce5>] prepare_binprm+0x85/0x190 [ 122.204515] [<ffffffff81216545>] do_execveat_common.isra.33+0x485/0x710 [ 122.206200] [<ffffffff81216a6a>] SyS_execve+0x3a/0x50 [ 122.207615] [<ffffffff81838795>] stub_execve+0x5/0x5 [ 122.208978] [<ffffffff818384f2>] ? entry_SYSCALL_64_fastpath+0x16/0x71 [ 122.210615] Code: f8 31 c0 48 63 c2 83 ea 01 48 c7 45 e8 00 00 00 00 48 01 c6 85 d2 48 c7 45 f0 00 00 00 00 48 89 75 e0 89 55 dc 78 0c 48 8d 46 ff <c6> 46 ff 00 48 89 45 e0 48 8d 55 e0 48 8d 4d dc 48 8d 75 e8 e8 [ 122.217320] RIP [<ffffffff81228844>] d_absolute_path+0x44/0xa0 [ 122.218860] RSP <ffff880076477b90> [ 122.219919] CR2: ffff880080945fff [ 122.220936] ---[ end trace 506cdbd85eb6c55e ]--- Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 2f782278 ] When qedr is enabled, qed would try dividing the msi-x vectors between L2 and RoCE, starting with L2 and providing it with sufficient vectors for its queues. Problem is qed would also do that for storage partitions, and as those don't need queues it would lead qed to award those partitions with 0 msi-x vectors, causing them to believe theye're using INTa and preventing them from operating. Fixes: 51ff1725 ("qed: Add support for RoCE hw init") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
[ Upstream commit 75106523 ] The commit 08024885 ("ses: Add power_status to SES device slot") introduced the 'power_status' attribute to enclosure components and the associated callbacks. There are 2 callbacks available to get the power status of a device: 1) ses_get_power_status() for 'struct enclosure_component_callbacks' 2) get_component_power_status() for the sysfs device attribute (these are available for kernel-space and user-space, respectively.) However, despite both methods being available to get power status on demand, that commit also introduced a call to get power status in ses_enclosure_data_process(). This dramatically increased the total probe time for SCSI devices on larger configurations, because ses_enclosure_data_process() is called several times during the SCSI devices probe and loops over the component devices (but that is another problem, another patch). That results in a tremendous continuous hammering of SCSI Receive Diagnostics commands to the enclosure-services device, which does delay the total probe time for the SCSI devices __significantly__: Originally, ~34 minutes on a system attached to ~170 disks: [ 9214.490703] mpt3sas version 13.100.00.00 loaded ... [11256.580231] scsi 17:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) With this patch, it decreased to ~2.5 minutes -- a 13.6x faster [ 1002.992533] mpt3sas version 13.100.00.00 loaded ... [ 1151.978831] scsi 11:0:177:0: qdepth(16), tagged(1), simple(0), ordered(0), scsi_level(6), cmd_que(1) Back to the commit discussion.. on the ses_get_power_status() call introduced in ses_enclosure_data_process(): impact of removing it. That may possibly be in place to initialize the power status value on device probe. However, those 2 functions available to retrieve that value _do_ automatically refresh/update it. So the potential benefit would be a direct access of the 'power_status' field which does not use the callbacks... But the only reader of 'struct enclosure_component::power_status' is the get_component_power_status() callback for sysfs attribute, and it _does_ check for and call the .get_power_status callback, (which indeed is defined and implemented by that commit), so the power status value is, again, automatically updated. So, the remaining potential for a direct/non-callback access to the power_status attribute would be out-of-tree modules -- well, for those, if they are for whatever reason interested in values that are set during device probe and not up-to-date by the time they need it.. well, that would be curious. Well, to handle that more properly, set the initial power state value to '-1' (i.e., uninitialized) instead of '1' (power 'on'), and check for it in that callback which may do an direct access to the field value _if_ a callback function is not defined. Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Fixes: 08024885 ("ses: Add power_status to SES device slot") Reviewed-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Thor Thayer authored
[ Upstream commit 25b223dd ] The peripherals' RAS functionality only exist on the Arria10 SoCFPGA. The Cyclone5 initialization generates EDAC warnings when the peripherals aren't found in the device tree. Fix by checking for Arria10 in the init functions. Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1491415262-5018-1-git-send-email-thor.thayer@linux.intel.comSigned-off-by:
-
Phil Turnbull authored
[ Upstream commit 540fca35 ] FM10K_REMOVED expects a hardware address, not a 'struct fm10k_hw'. Fixes: 5cb8db4a ("fm10k: Add support for VF") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
-
