- 27 Nov, 2014 40 commits
-
-
Hiroaki SHIMODA authored
commit 6251edd9 upstream. Even if netlink_kernel_cfg::unbind is implemented the unbind() method is not called, because cfg->unbind is omitted in __netlink_kernel_create(). And fix wrong argument of test_bit() and off by one problem. At this point, no unbind() method is implemented, so there is no real issue. Fixes: 4f520900 ("netlink: have netlink per-protocol bind function return an error code.") Signed-off-by:
Hiroaki SHIMODA <shimoda.hiroaki@gmail.com> Cc: Richard Guy Briggs <rgb@redhat.com> Acked-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Eric Dumazet authored
commit 5337b5b7 upstream. Use IS_ENABLED(CONFIG_IPV6), to enable this code if IPv6 is a module. Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: c8e6ad08 ("ipv6: honor IPV6_PKTINFO with v4 mapped addresses on sendmsg") Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
commit 4184b2a7 upstream. A very minimal and simple user space application allocating an SCTP socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing the socket again will leak the memory containing the authentication key from user space: unreferenced object 0xffff8800837047c0 (size 16): comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s) hex dump (first 16 bytes): 01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811c88d8>] __kmalloc+0xe8/0x270 [<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp] [<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp] [<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp] [<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20 [<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0 [<ffffffff816e58a9>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff This is bad because of two things, we can bring down a machine from user space when auth_enable=1, but also we would leave security sensitive keying material in memory without clearing it after use. The issue is that sctp_auth_create_key() already sets the refcount to 1, but after allocation sctp_auth_set_key() does an additional refcount on it, and thus leaving it around when we free the socket. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Borkmann authored
commit e40607cb upstream. An SCTP server doing ASCONF will panic on malformed INIT ping-of-death in the form of: ------------ INIT[PARAM: SET_PRIMARY_IP] ------------> While the INIT chunk parameter verification dissects through many things in order to detect malformed input, it misses to actually check parameters inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary IP address' parameter in ASCONF, which has as a subparameter an address parameter. So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0 and thus sctp_get_af_specific() returns NULL, too, which we then happily dereference unconditionally through af->from_addr_param(). The trace for the log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] PGD 0 Oops: 0000 [#1] SMP [...] Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp] [...] Call Trace: <IRQ> [<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp] [<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp] [<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp] [<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp] [<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp] [<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp] [<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp] [<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter] [<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120 [<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0 [...] A minimal way to address this is to check for NULL as we do on all other such occasions where we know sctp_get_af_specific() could possibly return with NULL. Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
-
Marcelo Leitner authored
commit 19ca9fc1 upstream. Currently, we only match against local port number in order to reuse socket. But if this new vxlan wants an IPv6 socket and a IPv4 one bound to that port, vxlan will reuse an IPv4 socket as IPv6 and a panic will follow. The following steps reproduce it: # ip link add vxlan6 type vxlan id 42 group 229.10.10.10 \ srcport 5000 6000 dev eth0 # ip link add vxlan7 type vxlan id 43 group ff0e::110 \ srcport 5000 6000 dev eth0 # ip link set vxlan6 up # ip link set vxlan7 up <panic> [ 4.187481] BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 ... [ 4.188076] Call Trace: [ 4.188085] [<ffffffff81667c4a>] ? ipv6_sock_mc_join+0x3a/0x630 [ 4.188098] [<ffffffffa05a6ad6>] vxlan_igmp_join+0x66/0xd0 [vxlan] [ 4.188113] [<ffffffff810a3430>] process_one_work+0x220/0x710 [ 4.188125] [<ffffffff810a33c4>] ? process_one_work+0x1b4/0x710 [ 4.188138] [<ffffffff810a3a3b>] worker_thread+0x11b/0x3a0 [ 4.188149] [<ffffffff810a3920>] ? process_one_work+0x710/0x710 So address family must also match in order to reuse a socket. Reported-by:
Jean-Tsung Hsiao <jhsiao@redhat.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Karl Beldan authored
commit 2c2a9cbd upstream. ATM, txq_reclaim will dequeue and free an skb for each tx desc released by the hw that has TX_LAST_DESC set. However, in case of TSO, each hw desc embedding the last part of a segment has TX_LAST_DESC set, losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance, which causes data corruption. Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and warn when trying to dequeue from an empty txq (which can be symptomatic of releasing skbs prematurely). Fixes: 3ae8f4e0 ('net: mv643xx_eth: Implement software TSO') Reported-by:
Slawomir Gajzner <slawomir.gajzner@gmail.com> Reported-by:
Julien D'Ascenzio <jdascenzio@yahoo.fr> Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by:
-
Steffen Klassert authored
commit f03eb128 upstream. Otherwise it gets overwritten by register_netdev(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Steffen Klassert authored
commit ebe084aa upstream. ipip6_tunnel_init() sets the dev->iflink via a call to ipip6_tunnel_bind_dev(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ipip6_tunnel_init() as the ndo_init function. Then ipip6_tunnel_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Steffen Klassert authored
commit 16a0231b upstream. vti6_dev_init() sets the dev->iflink via a call to vti6_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for vti6 tunnels. Fix this by using vti6_dev_init() as the ndo_init function. Then vti6_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Steffen Klassert authored
commit 6c6151da upstream. ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
NeilBrown authored
commit 45eaf45d upstream. md_check_recovery will skip any recovery and also clear MD_RECOVERY_NEEDED if MD_RECOVERY_FROZEN is set. So when we clear _FROZEN, we must set _NEEDED and ensure that md_check_recovery gets run. Otherwise we could miss out on something that is needed. In particular, this can make it impossible to remove a failed device from an array is the 'recovery-needed' processing didn't happen. Suitable for stable kernels since 3.13. Reported-and-tested-by:
Joe Lawrence <joe.lawrence@stratus.com> Fixes: 30b8feb7Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Stefan Richter authored
commit eaca2d8e upstream. Found by the UC-KLEE tool: A user could supply less input to firewire-cdev ioctls than write- or write/read-type ioctl handlers expect. The handlers used data from uninitialized kernel stack then. This could partially leak back to the user if the kernel subsequently generated fw_cdev_event_'s (to be read from the firewire-cdev fd) which notably would contain the _u64 closure field which many of the ioctl argument structures contain. The fact that the handlers would act on random garbage input is a lesser issue since all handlers must check their input anyway. The fix simply always null-initializes the entire ioctl argument buffer regardless of the actual length of expected user input. That is, a runtime overhead of memset(..., 40) is added to each firewirew-cdev ioctl() call. [Comment from Clemens Ladisch: This part of the stack is most likely to be already in the cache.] Remarks: - There was never any leak from kernel stack to the ioctl output buffer itself. IOW, it was not possible to read kernel stack by a read-type or write/read-type ioctl alone; the leak could at most happen in combination with read()ing subsequent event data. - The actual expected minimum user input of each ioctl from include/uapi/linux/firewire-cdev.h is, in bytes: [0x00] = 32, [0x05] = 4, [0x0a] = 16, [0x0f] = 20, [0x14] = 16, [0x01] = 36, [0x06] = 20, [0x0b] = 4, [0x10] = 20, [0x15] = 20, [0x02] = 20, [0x07] = 4, [0x0c] = 0, [0x11] = 0, [0x16] = 8, [0x03] = 4, [0x08] = 24, [0x0d] = 20, [0x12] = 36, [0x17] = 12, [0x04] = 20, [0x09] = 24, [0x0e] = 4, [0x13] = 40, [0x18] = 4. Reported-by:
David Ramos <daramos@stanford.edu> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Pali Rohár authored
commit a7ef82ae upstream. Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tang Chen authored
commit 0bd85420 upstream. When memory is hot-added, all the memory is in offline state. So clear all zones' present_pages because they will be updated in online_pages() and offline_pages(). Otherwise, /proc/zoneinfo will corrupt: When the memory of node2 is offline: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 8388608 managed 0 When we online memory on node2: # cat /proc/zoneinfo ...... Node 2, zone Movable ...... spanned 8388608 present 16777216 managed 8388608 Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Tang Chen authored
commit f784a3f1 upstream. In free_area_init_core(), zone->managed_pages is set to an approximate value for lowmem, and will be adjusted when the bootmem allocator frees pages into the buddy system. But free_area_init_core() is also called by hotadd_new_pgdat() when hot-adding memory. As a result, zone->managed_pages of the newly added node's pgdat is set to an approximate value in the very beginning. Even if the memory on that node has node been onlined, /sys/device/system/node/nodeXXX/meminfo has wrong value: hot-add node2 (memory not onlined) cat /sys/device/system/node/node2/meminfo Node 2 MemTotal: 33554432 kB Node 2 MemFree: 0 kB Node 2 MemUsed: 33554432 kB Node 2 Active: 0 kB This patch fixes this problem by reset node managed pages to 0 after hot-adding a new node. 1. Move reset_managed_pages_done from reset_node_managed_pages() to reset_all_zones_managed_pages() 2. Make reset_node_managed_pages() non-static 3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat is initialized Signed-off-by:
-
Weijie Yang authored
commit c4065152 upstream. zram could kunmap_atomic() a NULL pointer in a rare situation: a zram page becomes a full-zeroed page after a partial write io. The current code doesn't handle this case and performs kunmap_atomic() on a NULL pointer, which panics the kernel. This patch fixes this issue. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang.kh@gmail.com> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Nathan Lynch authored
commit 08b964ff upstream. The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Reported-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 238962ac upstream. To speed up decompression, the decompressor sets up a flat, cacheable mapping of memory. However, when there is insufficient space to hold the page tables for this mapping, we don't bother to enable the caches and subsequently skip all the cache maintenance hooks. Skipping the cache maintenance before jumping to the relocated code allows the processor to predict the branch and populate the I-cache with stale data before the relocation loop has completed (since a bootloader may have SCTLR.I set, which permits normal, cacheable instruction fetches regardless of SCTLR.M). This patch moves the cache maintenance check into the maintenance routines themselves, allowing the v6/v7 versions to invalidate the I-cache regardless of the MMU state. Reported-by:
Marc Carino <marc.ceeeee@gmail.com> Tested-by:
Julien Grall <julien.grall@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Ilya Dryomov authored
commit aaef3170 upstream. Large (greater than 32k, the value of PAGE_ALLOC_COSTLY_ORDER) auth tickets will have their buffers vmalloc'ed, which leads to the following crash in crypto: [ 28.685082] BUG: unable to handle kernel paging request at ffffeb04000032c0 [ 28.686032] IP: [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.686032] PGD 0 [ 28.688088] Oops: 0000 [#1] PREEMPT SMP [ 28.688088] Modules linked in: [ 28.688088] CPU: 0 PID: 878 Comm: kworker/0:2 Not tainted 3.17.0-vm+ #305 [ 28.688088] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.688088] Workqueue: ceph-msgr con_work [ 28.688088] task: ffff88011a7f9030 ti: ffff8800d903c000 task.ti: ffff8800d903c000 [ 28.688088] RIP: 0010:[<ffffffff81392b42>] [<ffffffff81392b42>] scatterwalk_pagedone+0x22/0x80 [ 28.688088] RSP: 0018:ffff8800d903f688 EFLAGS: 00010286 [ 28.688088] RAX: ffffeb04000032c0 RBX: ffff8800d903f718 RCX: ffffeb04000032c0 [ 28.688088] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8800d903f750 [ 28.688088] RBP: ffff8800d903f688 R08: 00000000000007de R09: ffff8800d903f880 [ 28.688088] R10: 18df467c72d6257b R11: 0000000000000000 R12: 0000000000000010 [ 28.688088] R13: ffff8800d903f750 R14: ffff8800d903f8a0 R15: 0000000000000000 [ 28.688088] FS: 00007f50a41c7700(0000) GS:ffff88011fc00000(0000) knlGS:0000000000000000 [ 28.688088] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.688088] CR2: ffffeb04000032c0 CR3: 00000000da3f3000 CR4: 00000000000006b0 [ 28.688088] Stack: [ 28.688088] ffff8800d903f698 ffffffff81392ca8 ffff8800d903f6e8 ffffffff81395d32 [ 28.688088] ffff8800dac96000 ffff880000000000 ffff8800d903f980 ffff880119b7e020 [ 28.688088] ffff880119b7e010 0000000000000000 0000000000000010 0000000000000010 [ 28.688088] Call Trace: [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81392ca8>] scatterwalk_done+0x38/0x40 [ 28.688088] [<ffffffff81395d32>] blkcipher_walk_done+0x182/0x220 [ 28.688088] [<ffffffff813990bf>] crypto_cbc_encrypt+0x15f/0x180 [ 28.688088] [<ffffffff81399780>] ? crypto_aes_set_key+0x30/0x30 [ 28.688088] [<ffffffff8156c40c>] ceph_aes_encrypt2+0x29c/0x2e0 [ 28.688088] [<ffffffff8156d2a3>] ceph_encrypt2+0x93/0xb0 [ 28.688088] [<ffffffff8156d7da>] ceph_x_encrypt+0x4a/0x60 [ 28.688088] [<ffffffff8155b39d>] ? ceph_buffer_new+0x5d/0xf0 [ 28.688088] [<ffffffff8156e837>] ceph_x_build_authorizer.isra.6+0x297/0x360 [ 28.688088] [<ffffffff8112089b>] ? kmem_cache_alloc_trace+0x11b/0x1c0 [ 28.688088] [<ffffffff8156b496>] ? ceph_auth_create_authorizer+0x36/0x80 [ 28.688088] [<ffffffff8156ed83>] ceph_x_create_authorizer+0x63/0xd0 [ 28.688088] [<ffffffff8156b4b4>] ceph_auth_create_authorizer+0x54/0x80 [ 28.688088] [<ffffffff8155f7c0>] get_authorizer+0x80/0xd0 [ 28.688088] [<ffffffff81555a8b>] prepare_write_connect+0x18b/0x2b0 [ 28.688088] [<ffffffff81559289>] try_read+0x1e59/0x1f10 This is because we set up crypto scatterlists as if all buffers were kmalloc'ed. Fix it. Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Reviewed-by:
Sage Weil <sage@redhat.com> Signed-off-by:
-
Paul Mackerras authored
commit ad0eab92 upstream. The branches of the if (i->type & ITER_BVEC) statement in iov_iter_single_seg_count() are the wrong way around; if ITER_BVEC is clear then we use i->bvec, when we should be using i->iov. This fixes it. In my case, the symptom that this caused was that a KVM guest doing filesystem operations on a virtual disk would result in one of qemu's threads on the host going into an infinite loop in generic_perform_write(). The loop would hit the copied == 0 case and call iov_iter_single_seg_count() to reduce the number of bytes to try to process, but because of the error, iov_iter_single_seg_count() would just return i->count and the loop made no progress and continued forever. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
William Cohen authored
commit 899d5933 upstream. When experimenting with patches to provide kprobes support for aarch64 smp machines would hang when inserting breakpoints into kernel code. The hangs were caused by a race condition in the code called by aarch64_insn_patch_text_sync(). The first processor in the aarch64_insn_patch_text_cb() function would patch the code while other processors were still entering the function and incrementing the cpu_count field. This resulted in some processors never observing the exit condition and exiting the function. Thus, processors in the system hung. The first processor to enter the patching function performs the patching and signals that the patching is complete with an increment of the cpu_count field. When all the processors have incremented the cpu_count field the cpu_count will be num_cpus_online()+1 and they will return to normal execution. Fixes: ae164807 arm64: introduce interfaces to hotpatch kernel and module code Signed-off-by:
William Cohen <wcohen@redhat.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kyle McMartin authored
commit 97fc1543 upstream. ARM64 currently doesn't fix up faults on the single-byte (strb) case of __clear_user... which means that we can cause a nasty kernel panic as an ordinary user with any multiple PAGE_SIZE+1 read from /dev/zero. i.e.: dd if=/dev/zero of=foo ibs=1 count=1 (or ibs=65537, etc.) This is a pretty obscure bug in the general case since we'll only __do_kernel_fault (since there's no extable entry for pc) if the mmap_sem is contended. However, with CONFIG_DEBUG_VM enabled, we'll always fault. if (!down_read_trylock(&mm->mmap_sem)) { if (!user_mode(regs) && !search_exception_tables(regs->pc)) goto no_context; retry: down_read(&mm->mmap_sem); } else { /* * The above down_read_trylock() might have succeeded in * which * case, we'll have missed the might_sleep() from * down_read(). */ might_sleep(); if (!user_mode(regs) && !search_exception_tables(regs->pc)) goto no_context; } Fix that by adding an extable entry for the strb instruction, since it touches user memory, similar to the other stores in __clear_user. Signed-off-by:
Kyle McMartin <kyle@redhat.com> Reported-by:
Miloš Prchlík <mprchlik@redhat.com> Signed-off-by:
-
Mark Rutland authored
commit 9b0b2658 upstream. While efi-entry.S mentions that efi_entry() will have relocated the kernel image, it actually means that efi_entry will have placed a copy of the kernel in the appropriate location, and until this is branched to at the end of efi_entry.S, all instructions are executed from the original image. Thus while the flush in efi_entry.S does ensure that the copy is visible to noncacheable accesses, it does not guarantee that this is true for the image instructions are being executed from. This could have disasterous effects when the MMU and caches are disabled if the image has not been naturally evicted to the PoC. Additionally, due to a missing dsb following the ic ialluis, the new kernel image is not necessarily clean in the I-cache when it is branched to, with similar potentially disasterous effects. This patch adds additional flushing to ensure that the currently executing stub text is flushed to the PoC and is thus visible to noncacheable accesses. As it is placed after the instructions cache maintenance for the new image and __flush_dcache_area already contains a dsb, we do not need to add a separate barrier to ensure completion of the icache maintenance. Comments are updated to clarify the situation with regard to the two images and the maintenance required for both. Fixes: 3c7f2550Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Joel Schopp <joel.schopp@amd.com> Reviewed-by:
Roy Franz <roy.franz@linaro.org> Tested-by:
Tom Lendacky <thomas.lendacky@amd.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Takashi Iwai authored
commit 3542aed7 upstream. Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin 0x1b on CX20585 codec. (EAPD bit on corresponds to mute LED on.) The machine doesn't need other EAPD, so the fixup concentrates on controlling EAPD 0x1b following the vmaster state (but inversely). Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315Reported-by:
Szymon Kowalczyk <fazerxlo@o2.pl> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Trond Myklebust authored
commit f8ebf7a8 upstream. If state recovery failed, then we should not attempt to reclaim delegated state. http://lkml.kernel.org/r/CAN-5tyHwG=Cn2Q9KsHWadewjpTTy_K26ee+UnSvHvG4192p-Xw@mail.gmail.comSigned-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit c606bb88 upstream. NFSv4.x (x>0) requires us to call TEST_STATEID+FREE_STATEID if a stateid is revoked. We will currently fail to do this if the stateid is a delegation. http://lkml.kernel.org/r/CAN-5tyHwG=Cn2Q9KsHWadewjpTTy_K26ee+UnSvHvG4192p-Xw@mail.gmail.comSigned-off-by:
-
Trond Myklebust authored
commit 869f9dfa upstream. Any attempt to call nfs_remove_bad_delegation() while a delegation is being returned is currently a no-op. This means that we can end up looping forever in nfs_end_delegation_return() if something causes the delegation to be revoked. This patch adds a mechanism whereby the state recovery code can communicate to the delegation return code that the delegation is no longer valid and that it should not be used when reclaiming state. It also changes the return value for nfs4_handle_delegation_recall_error() to ensure that nfs_end_delegation_return() does not reattempt the lock reclaim before state recovery is done. http://lkml.kernel.org/r/CAN-5tyHwG=Cn2Q9KsHWadewjpTTy_K26ee+UnSvHvG4192p-Xw@mail.gmail.comSigned-off-by:
-
Trond Myklebust authored
commit 0c116cad upstream. This patch removes the assumption made previously, that we only need to check the delegation stateid when it matches the stateid on a cached open. If we believe that we hold a delegation for this file, then we must assume that its stateid may have been revoked or expired too. If we don't test it then our state recovery process may end up caching open/lock state in a situation where it should not. We therefore rename the function nfs41_clear_delegation_stateid as nfs41_check_delegation_stateid, and change it to always run through the delegation stateid test and recovery process as outlined in RFC5661. http://lkml.kernel.org/r/CAN-5tyHwG=Cn2Q9KsHWadewjpTTy_K26ee+UnSvHvG4192p-Xw@mail.gmail.comSigned-off-by:
-
Trond Myklebust authored
commit 4dfd4f7a upstream. NFSv4.0 does not have TEST_STATEID/FREE_STATEID functionality, so unlike NFSv4.1, the recovery procedure when stateids have expired or have been revoked requires us to just forget the delegation. http://lkml.kernel.org/r/CAN-5tyHwG=Cn2Q9KsHWadewjpTTy_K26ee+UnSvHvG4192p-Xw@mail.gmail.comSigned-off-by:
-
Jan Kara authored
commit 16caf5b6 upstream. Variable 'err' needn't be initialized when nfs_getattr() uses it to check whether it should call generic_fillattr() or not. That can result in spurious error returns. Initialize 'err' properly. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Peng Tao authored
commit 8c393f9a upstream. For pNFS direct writes, layout driver may dynamically allocate ds_cinfo.buckets. So we need to take care to free them when freeing dreq. Ideally this needs to be done inside layout driver where ds_cinfo.buckets are allocated. But buckets are attached to dreq and reused across LD IO iterations. So I feel it's OK to free them in the generic layer. Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
-
Dave Airlie authored
commit 1c949842 upstream. While developing MST support I noticed I often got the wrong data back from a transaction, in a racy fashion. I noticed the scratch space wasn't locked against concurrent users. Based on a patch by Alex, but I've made it a bit more obvious when things are locked. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Miklos Szeredi authored
commit 799b6014 upstream. Audit rules disappear when an inode they watch is evicted from the cache. This is likely not what we want. The guilty commit is "fsnotify: allow marks to not pin inodes in core", which didn't take into account that audit_tree adds watches with a zero mask. Adding any mask should fix this. Fixes: 90b1e7a5 ("fsnotify: allow marks to not pin inodes in core") Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 1a290581 upstream. M-audio FastTrack Ultra quirk doesn't release the kzalloc'ed memory. This patch adds the private_free callback to release it properly. Signed-off-by:
-
Daniel Thompson authored
commit 3438cf54 upstream. Currently if the user passes an invalid value on the kernel command line then the kernel will crash during argument parsing. On most systems this is very hard to debug because the console hasn't been initialized yet. This is a regression due to commit 51e158c1 ("param: hand arguments after -- straight to init") which, in response to the systemd debug controversy, made it possible to explicitly pass arguments to init. To achieve this parse_args() was extended from simply returning an error code to returning a pointer. Regretably the new init args logic does not perform a proper validity check on the pointer resulting in a crash. This patch fixes the validity check. Should the check fail then no arguments will be passed to init. This is reasonable and matches how the kernel treats its own arguments (i.e. no error recovery). Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rabin Vincent authored
commit e30f53aa upstream. On a !PREEMPT kernel, attempting to use trace-cmd results in a soft lockup: # trace-cmd record -e raw_syscalls:* -F false NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [trace-cmd:61] ... Call Trace: [<ffffffff8105b580>] ? __wake_up_common+0x90/0x90 [<ffffffff81092e25>] wait_on_pipe+0x35/0x40 [<ffffffff810936e3>] tracing_buffers_splice_read+0x2e3/0x3c0 [<ffffffff81093300>] ? tracing_stats_read+0x2a0/0x2a0 [<ffffffff812d10ab>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810dc87b>] ? do_read_fault+0x21b/0x290 [<ffffffff810de56a>] ? handle_mm_fault+0x2ba/0xbd0 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff810951e2>] ? trace_buffer_lock_reserve+0x22/0x60 [<ffffffff81095c80>] ? trace_event_buffer_lock_reserve+0x40/0x80 [<ffffffff8112415d>] do_splice_to+0x6d/0x90 [<ffffffff81126971>] SyS_splice+0x7c1/0x800 [<ffffffff812d1edd>] tracesys_phase2+0xd3/0xd8 The problem is this: tracing_buffers_splice_read() calls ring_buffer_wait() to wait for data in the ring buffers. The buffers are not empty so ring_buffer_wait() returns immediately. But tracing_buffers_splice_read() calls ring_buffer_read_page() with full=1, meaning it only wants to read a full page. When the full page is not available, tracing_buffers_splice_read() tries to wait again with ring_buffer_wait(), which again returns immediately, and so on. Fix this by adding a "full" argument to ring_buffer_wait() which will make ring_buffer_wait() wait until the writer has left the reader's page, i.e. until full-page reads will succeed. Link: http://lkml.kernel.org/r/1415645194-25379-1-git-send-email-rabin@rab.in Fixes: b1169cc6 ("tracing: Remove mock up poll wait function") Signed-off-by:
Rabin Vincent <rabin@rab.in> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Helge Deller authored
commit 2fe749f5 upstream. Switch over the msgctl, shmat, shmctl and semtimedop syscalls to use the compat layer. The problem was found with the debian procenv package, which called shmctl(0, SHM_INFO, &info); in which the shmctl syscall then overwrote parts of the surrounding areas on the stack on which the info variable was stored and thus lead to a segfault later on. Additionally fix the definition of struct shminfo64 to use unsigned longs like the other architectures. This has no impact on userspace since we only have a 32bit userspace up to now. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Joe Thornber authored
commit 9b460d36 upstream. The walk code was using a 'ro_spine' to hold it's locked btree nodes. But this data structure is designed for the rolling lock scheme, and as such automatically unlocks blocks that are two steps up the call chain. This is not suitable for the simple recursive walk algorithm, which retraces its steps. This code is only used by the persistent array code, which in turn is only used by dm-cache. In order to trigger it you need to have a mapping tree that is more than 2 levels deep; which equates to 8-16 million cache blocks. For instance a 4T ssd with a very small block size of 32k only just triggers this bug. The fix just places the locked blocks on the stack, and stops using the ro_spine altogether. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Tony Lindgren authored
commit 481c7f86 upstream. Commit e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration") enabled configuring the PM features for twl4030. This caused poweroff command to fail on devices that have the BCI charger on twl4030 wired, or have power wired for VBUS. Instead of powering off, the device reboots. This is because voltage is detected on charger or VBUS with the default bits enabled for the power transition registers. To fix the issue, let's just clear VBUS and CHG bits as we want poweroff command to keep the system powered off. Fixes: e7cd1d1e ("mfd: twl4030-power: Add generic reset configuration") Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Christoph Hellwig authored
commit 48379270 upstream. Setups that use the blk-mq I/O path can lock up if a host with a single device that has its door locked enters EH. Make sure to only send the command to re-lock the door to devices that actually were reset and thus might have lost their state. Otherwise the EH code might be get blocked on blk_get_request as all requests for non-reset devices might be in use. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Meelis Roos <meelis.roos@ut.ee> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
