- 11 May, 2019 13 commits
-
-
Alexander Shishkin authored
commit e60e9a4b upstream. This adds support for Intel TH on Comet Lake. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prasad Sodagudi authored
commit 59c39840 upstream. When irq_set_affinity_notifier() replaces the notifier, then the reference count on the old notifier is dropped which causes it to be freed. But nothing ensures that the old notifier is not longer queued in the work list. If it is queued this results in a use after free and possibly in work list corruption. Ensure that the work is canceled before the reference is dropped. Signed-off-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: marc.zyngier@arm.com Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.orgSigned-off-by:
-
Alan Stern authored
commit 747668db upstream. The USB subsystem has always had an unusual requirement for its scatter-gather transfers: Each element in the scatterlist (except the last one) must have a length divisible by the bulk maxpacket size. This is a particular issue for USB mass storage, which uses SG lists created by the block layer rather than setting up its own. So far we have scraped by okay because most devices have a logical block size of 512 bytes or larger, and the bulk maxpacket sizes for USB 2 and below are all <= 512. However, USB 3 has a bulk maxpacket size of 1024. Since the xhci-hcd driver includes native SG support, this hasn't mattered much. But now people are trying to use USB-3 mass storage devices with USBIP, and the vhci-hcd driver currently does not have full SG support. The result is an overflow error, when the driver attempts to implement an SG transfer of 63 512-byte blocks as a single 3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks) transfers. The device instead sends 31 1024-byte packets followed by a 512-byte packet, and this overruns the first SG buffer. Ideally this would be fixed by adding better SG support to vhci-hcd. But for now it appears we can work around the problem by asking the block layer to respect the maxpacket limitation, through the use of the virt_boundary_mask. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Seth Bollinger <Seth.Bollinger@digi.com> Tested-by:
-
Johan Hovold authored
commit 764478f4 upstream. Fix two long-standing bugs which could potentially lead to memory corruption or leave the port throttled until it is reopened (on weakly ordered systems), respectively, when read-URB completion races with unthrottle(). First, the URB must not be marked as free before processing is complete to prevent it from being submitted by unthrottle() on another CPU. CPU 1 CPU 2 ================ ================ complete() unthrottle() process_urb(); smp_mb__before_atomic(); set_bit(i, free); if (test_and_clear_bit(i, free)) submit_urb(); Second, the URB must be marked as free before checking the throttled flag to prevent unthrottle() on another CPU from failing to observe that the URB needs to be submitted if complete() sees that the throttled flag is set. CPU 1 CPU 2 ================ ================ complete() unthrottle() set_bit(i, free); throttled = 0; smp_mb__after_atomic(); smp_mb(); if (throttled) if (test_and_clear_bit(i, free)) return; submit_urb(); Note that test_and_clear_bit() only implies barriers when the test is successful. To handle the case where the URB is still in use an explicit barrier needs to be added to unthrottle() for the second race condition. Also note that the first race was fixed by 36e59e0d ("cdc-acm: fix race between callback and unthrottle") back in 2015, but the bug was reintroduced a year later. Fixes: 1aba579f ("cdc-acm: handle read pipe errors") Fixes: 088c64f8 ("USB: cdc-acm: re-write read processing") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ji-Ze Hong (Peter Hong) authored
commit 804dbee1 upstream. The F81232 will use interrupt worker to handle MSR change. This patch will fix the issue that interrupt work should stop in close() and suspend(). This also fixes line-status events being disabled after a suspend cycle until the port is re-opened. Signed-off-by:
Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> [ johan: amend commit message ] Fixes: 87fe5adc ("USB: f81232: implement read IIR/MSR with endpoint") Cc: stable <stable@vger.kernel.org> # 4.1 Signed-off-by:
-
Thinh Nguyen authored
commit 8d791929 upstream. The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change the default value to 15. Cc: stable@vger.kernel.org Fixes: 80caf7d2 ("usb: dwc3: add lpm erratum support") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Marc Gonzalez authored
commit 77a49465 upstream. Keep EXTCON support optional, as some platforms do not need it. Do the same for USB_DWC3_OMAP while we're at it. Fixes: 3def4031 ("usb: dwc3: add EXTCON dependency for qcom") Signed-off-by:
Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Christian Gromm authored
commit 98592c1f upstream. This patch fixes the usage of the wrong struct device when calling function snd_card_new. Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Fixes: 69c90cf1 ("staging: most: sound: call snd_card_new with struct device") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Suresh Udipi authored
commit af708900 upstream. It looks like v4.18-rc1 commit [0] which upstreams mld-1.8.0 commit [1] missed to fix the memory leak in mod_exit function. Do it now. [0] aba258b7 ("staging: most: cdev: fix chrdev_region leak") [1] https://github.com/microchip-ais/linux/commit/a2d8f7ae7ea381 ("staging: most: cdev: fix leak for chrdev_region") Signed-off-by:
Suresh Udipi <sudipi@jp.adit-jv.com> Signed-off-by:
-
Tetsuo Handa authored
commit ae26aa84 upstream. Since wilc_set_multicast_list() is called with dev->addr_list_lock spinlock held, we can't use GFP_KERNEL memory allocation. Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: e624c58c ("staging: wilc1000: refactor code to avoid use of wilc_set_multicast_list global") Cc: Ajay Singh <ajay.kathat@microchip.com> Reviewed-by:
Adham Abozaeid <adham.abozaeid@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 47830c11 upstream. Since moving the message buffers off the stack, the dynamically allocated get-prop-descriptor request buffer is incorrectly sized due to using the pointer rather than request-struct size when creating the operation. Fortunately, the pointer size is always larger than this one-byte request, but this could still cause trouble on the remote end due to the unexpected message size. Fixes: 9d15134d ("greybus: power_supply: rework get descriptors") Cc: stable <stable@vger.kernel.org> # 4.9 Cc: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
commit f0996bc2 upstream. Building lib/ubsan.c with gcc-9 results in a ton of nasty warnings like this one: lib/ubsan.c warning: conflicting types for built-in function ‘__ubsan_handle_negate_overflow’; expected ‘void(void *, void *)’ [-Wbuiltin-declaration-mismatch] The kernel's declarations of __ubsan_handle_*() often uses 'unsigned long' types in parameters while GCC these parameters as 'void *' types, hence the mismatch. Fix this by using 'void *' to match GCC's declarations. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Fixes: c6d30853 ("UBSAN: run-time undefined behavior sanity checker") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit a0033bd1 upstream. With CONFIG_DEBUG_PREEMPT=y, the put_cpu_ptr() triggers an underflow warning in preempt_count_sub(). Fixes: 37cdd991 ("vmbus: put related per-cpu variable together") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org> Signed-off-by:
-
- 06 May, 2019 1 commit
-
-
Linus Torvalds authored
-
- 05 May, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "I'd like to apologize for this very late pull request: I was dithering through the week whether to send the fixes, and then yesterday Jiri's crash fix for a regression introduced in this cycle clearly marked perf/urgent as 'must merge now'. Most of the commits are tooling fixes, plus there's three kernel fixes via four commits: - race fix in the Intel PEBS code - fix an AUX bug and roll back a previous attempt - fix AMD family 17h generic HW cache-event perf counters The largest diffstat contribution comes from the AMD fix - a new event table is introduced, which is a fairly low risk change but has a large linecount" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix race in intel_pmu_disable_event() perf/x86/intel/pt: Remove software double buffering PMU capability perf/ring_buffer: Fix AUX software double buffering perf tools: Remove needless asm/unistd.h include fixing build in some places tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv tools build: Add -ldl to the disassembler-four-args feature test perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet perf cs-etm: Don't check cs_etm_queue::prev_packet validity perf report: Report OOM in status line in the GTK UI perf bench numa: Add define for RUSAGE_THREAD if not present tools lib traceevent: Change tag string for error perf annotate: Fix build on 32 bit for BPF annotation tools uapi x86: Sync vmx.h with the kernel perf bpf: Return value with unlocking in perf_env__find_btf() MAINTAINERS: Include vendor specific files under arch/*/events/* perf/x86/amd: Update generic hardware cache events for Family 17h -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Ingo Molnar: "Fix a kobject memory leak in the cpufreq code" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpufreq: Fix kobject memleak
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "Disable function tracing during early SME setup to fix a boot crash on SME-enabled kernels running distro kernels (some of which have function tracing enabled)" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mem_encrypt: Disable all instrumentation for early SME setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: - a couple of ->i_link use-after-free fixes - regression fix for wrong errno on absent device name in mount(2) (this cycle stuff) - ancient UFS braino in large GID handling on Solaris UFS images (bogus cut'n'paste from large UID handling; wrong field checked to decide whether we should look at old (16bit) or new (32bit) field) * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour Abort file_remove_privs() for non-reg. files [fix] get rid of checking for absent device name in vfs_get_tree() apparmorfs: fix use-after-free on symlink traversal securityfs: fix use-after-free on symlink traversal
-
Jiri Olsa authored
New race in x86_pmu_stop() was introduced by replacing the atomic __test_and_clear_bit() of cpuc->active_mask by separate test_bit() and __clear_bit() calls in the following commit: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") The race causes panic for PEBS events with enabled callchains: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:perf_prepare_sample+0x8c/0x530 Call Trace: <NMI> perf_event_output_forward+0x2a/0x80 __perf_event_overflow+0x51/0xe0 handle_pmi_common+0x19e/0x240 intel_pmu_handle_irq+0xad/0x170 perf_event_nmi_handler+0x2e/0x50 nmi_handle+0x69/0x110 default_do_nmi+0x3e/0x100 do_nmi+0x11a/0x180 end_repeat_nmi+0x16/0x1a RIP: 0010:native_write_msr+0x6/0x20 ... </NMI> intel_pmu_disable_event+0x98/0xf0 x86_pmu_stop+0x6e/0xb0 x86_pmu_del+0x46/0x140 event_sched_out.isra.97+0x7e/0x160 ... The event is configured to make samples from PEBS drain code, but when it's disabled, we'll go through NMI path instead, where data->callchain will not get allocated and we'll crash: x86_pmu_stop test_bit(hwc->idx, cpuc->active_mask) intel_pmu_disable_event(event) { ... intel_pmu_pebs_disable(event); ... EVENT OVERFLOW -> <NMI> intel_pmu_handle_irq handle_pmi_common TEST PASSES -> test_bit(bit, cpuc->active_mask)) perf_event_overflow perf_prepare_sample { ... if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) data->callchain = perf_callchain(event, regs); CRASH -> size += data->callchain->nr; } </NMI> ... x86_pmu_disable_event(event) } __clear_bit(hwc->idx, cpuc->active_mask); Fixing this by disabling the event itself before setting off the PEBS bit. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Arcari <darcari@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Lendacky Thomas <Thomas.Lendacky@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler") Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 04 May, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One regression fix. Changes we merged to STRICT_KERNEL_RWX on 32-bit were causing crashes under load on some machines depending on memory layout. Thanks to Christophe Leroy" * tag 'powerpc-5.1-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWX
-
- 03 May, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: - PPC and ARM bugfixes from submaintainers - Fix old Windows versions on AMD (recent regression) - Fix old Linux versions on processors without EPT - Fixes for LAPIC timer optimizations * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: nVMX: Fix size checks in vmx_set_nested_state KVM: selftests: make hyperv_cpuid test pass on AMD KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE KVM: x86: Whitelist port 0x7e for pre-incrementing %rip Documentation: kvm: fix dirty log ioctl arch lists KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP KVM: arm/arm64: Ensure vcpu target is unset on reset failure KVM: lapic: Convert guest TSC to host time domain if necessary KVM: lapic: Allow user to disable adaptive tuning of timer advancement KVM: lapic: Track lapic timer advance per vCPU KVM: lapic: Disable timer advancement if adaptive tuning goes haywire x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012 KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short KVM: PPC: Book3S: Protect memslots while validating user address KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs ...
-
Linus Torvalds authored
Merge branch 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C driver bugfixes and a MAINTAINERS update for you" * 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Prevent runtime suspend of adapter when Host Notify is required i2c: synquacer: fix enumeration of slave devices MAINTAINERS: friendly takeover of i2c-gpio driver i2c: designware: ratelimit 'transfer when suspended' errors i2c: imx: correct the method of getting private data in notifier_call
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fix from Dave Airlie: "Just a single qxl revert" * tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drm: Revert "drm/qxl: drop prime import/export callbacks"
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for clkdev where we forgot to hold a lock while iterating a list that can change, and finally a build fix that adds some stubs for clk APIs that are used by devfreq drivers on platforms without the clk APIs" * tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Add missing stubs for a few functions clkdev: Hold clocks_mutex while iterating clocks list clk: sunxi-ng: nkmp: Explain why zero width check is needed clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A few stable fixes at this round. The USB Line6 audio fixes are a bit large, but they are rather trivial and pretty much device-specific, so should be safe to apply at this late stage. Ditto for other HD-audio quirks" * tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR ALSA: line6: use dynamic buffers ALSA: hda/realtek - Fixed Dell AIO speaker noise ALSA: hda/realtek - Add new Dell platform for headset mode
-
Alexander Shishkin authored
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.comSigned-off-by:
-
Alexander Shishkin authored
This recent commit: 5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") overlooked the fact that the previous one page granularity of the AUX buffer provided an implicit double buffering capability to the PMU driver, which went away when the entire buffer became one high-order page. Always make the full-trace mode AUX allocation at least two-part to preserve the previous behavior and allow the implicit double buffering to continue. Reported-by:
Ammy Yi <ammy.yi@intel.com> Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-5.1-20190502' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: tools UAPI: Arnaldo Carvalho de Melo: - Sync x86's vmx.h with the kernel. - Copy missing unistd.h headers for arc, hexagon and riscv, fixing a reported build regression on the ARC 32-bit architecture. perf bench numa: Arnaldo Carvalho de Melo: - Add define for RUSAGE_THREAD if not present, fixing the build on the ARC architecture when only zlib and libnuma are present. perf BPF: Arnaldo Carvalho de Melo: - The disassembler-four-args feature test needs -ldl on distros such as Mageia 7. Bo YU: - Fix unlocking on success in perf_env__find_btf(), detected with the coverity tool. libtraceevent: Leo Yan: - Change misleading hard coded 'trace-cmd' string in error messages. ARM hardware tracing: Leo Yan: - Always allocate memory for cs_etm_queue::prev_packet, fixing a segfault when processing CoreSight perf data. perf annotate: Thadeu Lima de Souza Cascardo: - Fix build on 32 bit for BPF. perf report: Thomas Richter: - Report OOM in status line in the GTK UI. core libs: - Remove needless asm/unistd.h that, used with sys/syscall.h ended up redefining the syscalls defines in environments such as the ARC arch when using uClibc. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
- 02 May, 2019 12 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
- One revert for QXL for a DRI3 breakage Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190502122529.hguztj3kncaixe3d@flea
-
Arnaldo Carvalho de Melo authored
We were including sys/syscall.h and asm/unistd.h, since sys/syscall.h includes asm/unistd.h, sometimes this leads to the redefinition of defines, breaking the build. Noticed on ARC with uCLibc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-xjpf80o64i2ko74aj2jih0qg@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Since those were introduced in: c8ce48f0 ("asm-generic: Make time32 syscall numbers optional") But when the asm-generic/unistd.h was sync'ed with tools/ in: 1a787fc5 ("tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources") I forgot to copy the files for the architectures that define __ARCH_WANT_TIME32_SYSCALLS, so the perf build was breaking there, as reported by Vineet Gupta for the ARC architecture. After updating my ARC container to use the glibc based toolchain + cross building libnuma, zlib and elfutils, I finally managed to reproduce the problem and verify that this now is fixed and will not regress as will be tested before each pull req sent upstream. Reported-by:
Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> CC: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190426193531.GC28586@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Thomas Backlund reported that the perf build was failing on the Mageia 7 distro, that is because it uses: cat /tmp/build/perf/feature/test-disassembler-four-args.make.output /usr/bin/ld: /usr/lib64/libbfd.a(plugin.o): in function `try_load_plugin': /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:243: undefined reference to `dlopen' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:271: undefined reference to `dlsym' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:256: undefined reference to `dlclose' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:246: undefined reference to `dlerror' as we allow dynamic linking and loading Mageia 7 uses these linker flags: $ rpm --eval %ldflags -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags So add -ldl to this feature LDFLAGS. Reported-by:
Thomas Backlund <tmb@mageia.org> Tested-by:
-
Leo Yan authored
Robert Walker reported a segmentation fault is observed when process CoreSight trace data; this issue can be easily reproduced by the command 'perf report --itrace=i1000i' for decoding tracing data. If neither the 'b' flag (synthesize branches events) nor 'l' flag (synthesize last branch entries) are specified to option '--itrace', cs_etm_queue::prev_packet will not been initialised. After merging the code to support exception packets and sample flags, there introduced a number of uses of cs_etm_queue::prev_packet without checking whether it is valid, for these cases any accessing to uninitialised prev_packet will cause crash. As cs_etm_queue::prev_packet is used more widely now and it's already hard to follow which functions have been called in a context where the validity of cs_etm_queue::prev_packet has been checked, this patch always allocates memory for cs_etm_queue::prev_packet. Reported-by:
Robert Walker <robert.walker@arm.com> Suggested-by:
Leo Yan <leo.yan@linaro.org> Tested-by:
-
Leo Yan authored
Since cs_etm_queue::prev_packet is allocated for all cases, it will never be NULL pointer; now validity checking prev_packet is pointless, remove all of them. Signed-off-by:
-
Thomas Richter authored
An -ENOMEM error is not reported in the GTK GUI. Instead this error message pops up on the screen: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 Processing events... [974K/3M] Error:failed to process sample 0xf4198 [0x8]: failed to process type: 68 However when I use the same perf.data file with --stdio it works: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 --stdio \ | head -12 # Total Lost Samples: 0 # # Samples: 76K of event 'cycles' # Event count (approx.): 99056160000 # # Overhead Command Shared Object Symbol # ........ ............... ................. ......... # 8.81% find [kernel.kallsyms] [k] ftrace_likely_update 8.74% swapper [kernel.kallsyms] [k] ftrace_likely_update 8.34% sshd [kernel.kallsyms] [k] ftrace_likely_update 2.19% kworker/u512:1- [kernel.kallsyms] [k] ftrace_likely_update The sample precentage is a bit low..... The GUI always fails in the FINISHED_ROUND event (68) and does not indicate the reason why. When happened is the following. Perf report calls a lot of functions and down deep when a FINISHED_ROUND event is processed, these functions are called: perf_session__process_event() + perf_session__process_user_event() + process_finished_round() + ordered_events__flush() + __ordered_events__flush() + do_flush() + ordered_events__deliver_event() + perf_session__deliver_event() + machine__deliver_event() + perf_evlist__deliver_event() + process_sample_event() + hist_entry_iter_add() --> only called in GUI case!!! + hist_iter__report__callback() + symbol__inc_addr_sample() Now this functions runs out of memory and returns -ENOMEM. This is reported all the way up until function perf_session__process_event() returns to its caller, where -ENOMEM is changed to -EINVAL and processing stops: if ((skip = perf_session__process_event(session, event, head)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", head, event->header.size, event->header.type); err = -EINVAL; goto out_err; } This occurred in the FINISHED_ROUND event when it has to process some 10000 entries and ran out of memory. This patch indicates the root cause and displays it in the status line of ther perf report GUI. Output before (on GUI status line): 0xf4198 [0x8]: failed to process type: 68 Output after: 0xf4198 [0x8]: failed to process type: 68 [not enough memory] Committer notes: the 'skip' variable needs to be initialized to -EINVAL, so that when the size is less than sizeof(struct perf_event_attr) we avoid this valid compiler warning: util/session.c: In function ‘perf_session__process_events’: util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized] err = skip; ~~~~^~~~~~ util/session.c:1874:6: note: ‘skip’ was declared here s64 skip; ^~~~ cc1: all warnings being treated as errors Signed-off-by:Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by:
Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
While cross building perf to the ARC architecture on a fedora 30 host, we were failing with: CC /tmp/build/perf/bench/numa.o bench/numa.c: In function ‘worker_thread’: bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’? getrusage(RUSAGE_THREAD, &rusage); ^~~~~~~~~~~~~ SIGEV_THREAD bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in [perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1 arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225 [perfbuilder@60d5802468f6 perf]$ Trying to reproduce a report by Vineet, I noticed that, with just cross-built zlib and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define, check for that and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define in the system headers, check if it is defined in the 'perf bench numa' sources and define it if not. Now it builds and I have to figure out if the problem reported by Vineet only takes place if we have libelf or some other library available. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.orgSigned-off-by: -
Leo Yan authored
The traceevent lib is used by the perf tool, and when executing perf test -v 6 it outputs error log on the ARM64 platform: running test 33 '*:*'trace-cmd: No such file or directory [...] trace-cmd: Invalid argument The trace event parsing code originally came from trace-cmd so it keeps the tag string "trace-cmd" for errors, this easily introduces the impression that the perf tool launches trace-cmd command for trace event parsing, but in fact the related parsing is accomplished by the traceevent lib. This patch changes the tag string to "libtraceevent" so that we can avoid confusion and let users to more easily connect the error with traceevent lib. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20190424013802.27569-1-leo.yan@linaro.orgSigned-off-by:
-
Thadeu Lima de Souza Cascardo authored
Commit 6987561c ("perf annotate: Enable annotation of BPF programs") adds support for BPF programs annotations but the new code does not build on 32-bit. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by:
Song Liu <songliubraving@fb.com> Fixes: 6987561c ("perf annotate: Enable annotation of BPF programs") Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes from: 2b27924b ("KVM: nVMX: always use early vmcs check when EPT is disabled") That causes this object in the tools/perf build process to be rebuilt: CC /tmp/build/perf/arch/x86/util/kvm-stat.o But it isn't using VMX_ABORT_ prefixed constants, so no change in behaviour. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/n/tip-bjbo3zc0r8i8oa0udpvftya6@git.kernel.orgSigned-off-by:
-
Bo YU authored
In perf_env__find_btf(), we're returning without unlocking "env->bpf_progs.lock". There may be cause lockdep issue. Detected by CoversityScan, CID# 1444762:(program hangs(LOCK)) Signed-off-by:
Bo YU <tsu.yubo@gmail.com> Acked-by:
-
