- 22 Mar, 2018 40 commits
-
-
Xose Vazquez Perez authored
[ Upstream commit 4b3aec2b ] Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500. Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220, D240 and D280. Add STK BladeCtlr family, arrays: B210, B220, B240 and B280. These changes were done in multipath-tools time ago. Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xose Vazquez Perez authored
[ Upstream commit b369a047 ] Commit 56f3d383 ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry") modified some Hitachi entries: HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. The same should have been done also for HP-rebranded. [mkp: checkpatch and tweaked commit message] Cc: Hannes Reinecke <hare@suse.de> Cc: Takahiro Yasui <takahiro.yasui@hds.com> Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit a44c9d36 ] Since scsi_get_device_flags_keyed() callers do not check whether or not the returned value is an error code, change that function such that it returns a flags value even if the 'key' argument is invalid. Note: since commit 28a0bc41 ("scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so checking whether bit 31 is set in the return value is not sufficient to tell the difference between an error code and a flags value. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Michael Chan authored
[ Upstream commit a8168b6c ] On some dual port NICs, the 2 ports have to be configured with compatible link speeds. Under some conditions, a port's configured speed may no longer be supported. The firmware will send a message to the driver when this happens. Improve this logic that prints out the warning by only printing it if we can determine the link speed that is no longer supported. If the speed is unknown or it is in autoneg mode, skip the warning message. Reported-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tobias Jordan authored
[ Upstream commit 2d9bbd02 ] sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to disable/unprepare them if we're not suspended. Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure that sun6i_spi_runtime_suspend() is called if needed. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3558fe90 (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by:
Tobias Jordan <Tobias.Jordan@elektrobit.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Julien BOIBESSOT authored
[ Upstream commit 77be4c87 ] Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD. SIGCHLD is the new POSIX name for that signal so it doesn't change anything on other libcs. This fixes this kind of build error: usbipd.c: In function ‘set_signal’: usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function) sigaction(SIGCLD, &act, NULL); ^~~~~~ usbipd.c:459:12: note: each undeclared identifier is reported only once for each function it appears in Makefile:407: recipe for target 'usbipd.o' failed make[3]: *** [usbipd.o] Error 1 Signed-off-by:
Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Ben Greear authored
[ Upstream commit 8cec57f5 ] The 10.4 firmware defines this as a 3-bit field, as does the mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF at least in the firmware header I have seen. This patch fixes the ath10k wmi header to match the firmware. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Limin Zhu authored
[ Upstream commit c61cfe49 ] (1) Change virtual interface operation in cfg80211 process reset and reinitilize private data structure. (2) Scan result event processed in main process will dereference private data structure concurrently, ocassionly crash the kernel. The cornel case could be trigger by below steps: (1) wpa_cli mlan0 scan (2) ./hostapd mlan0.conf Cfg80211 asynchronous scan procedure is not all the time operated under rtnl lock, here we add the protect to serialize the cfg80211 scan and change_virtual interface operation. Signed-off-by:
Limin Zhu <liminzhu@marvell.com> Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit d8e488e8 ] This patch fixes missing mnd_width for codec_digital clk, this is now set to 8 inline with datasheet. Fixes: 3966fab8 ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Axel Lin authored
[ Upstream commit 8472b529 ] Fix trivial copy/paste bug. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Fixes: ef1f09ec ("pwm: Add a driver for the STMPE PWM") Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Li Dongyang authored
[ Upstream commit 9c0a5002 ] We are testing if there is a match with the ses device in a loop by calling ses_match_to_enclosure(), which will issue scsi receive diagnostics commands to the ses device for every device on the same host. On one of our boxes with 840 disks, it takes a long time to load the driver: [root@g1b-oss06 ~]# time modprobe ses real 40m48.247s user 0m0.001s sys 0m0.196s With the patch: [root@g1b-oss06 ~]# time modprobe ses real 0m17.915s user 0m0.008s sys 0m0.053s Note that we still need to refresh page 10 when we see a new disk to create the link. Signed-off-by:
Li Dongyang <dongyang.li@anu.edu.au> Tested-by:
Jason Ozolins <jason.ozolins@hpe.com> Signed-off-by:
-
Manikanta Pubbisetty authored
[ Upstream commit 424ea0d1 ] It is required to update the teardown state of the peer when a tdls link with that peer is terminated. This information is useful for the target to perform some cleanups wrt the tdls peer. Without proper cleanup, target assumes that the peer is connected and blocks future connection requests, updating the teardown state of the peer addresses the problem. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by:
Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 09edcb64 ] If an error occurs when we enable the backup battery charging, we should go through the error handling path directly. Before commit db43e6c4 ("ab8500-bm: Add usb power path support") this was the case, but this commit has added some code between the last test and the 'out' label. So, in case of error, this added code is executed and the error may be silently ignored. Fix it by adding the missing 'goto out', as done in all other error handling paths. Fixes: db43e6c4 ("ab8500-bm: Add usb power path support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit bf59fddd ] 'ret' is know to be 0 at this point, because it has not been updated by the the previous call to 'abx500_mask_and_set_register_interruptible()'. Fix it by updating 'ret' before checking if an error occurred. Fixes: 84edbeea ("ab8500-charger: AB8500 charger driver") Signed-off-by:
-
Bjorn Andersson authored
[ Upstream commit 8f52df50 ] The pointer returned by of_device_get_match_data() doesn't have the same size as u32 on 64-bit architectures, causing a compile warning when compile-testing the driver on such platform. Cast the return value of of_device_get_match_data() to unsigned long and then to u32 to silence this warning. Fixes: 7f866986 ("leds: add PM8058 LEDs driver") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit bbc3e471 ] When vfs_submount was added the test to limit automounts from filesystems that with s_user_ns != &init_user_ns accidentially left in follow_automount. The test was never about any security concerns and was always about how do we implement this for filesystems whose s_user_ns != &init_user_ns. At the moment this check makes no difference as there are no filesystems that both set FS_USERNS_MOUNT and implement d_automount. Remove this check now while I am thinking about it so there will not be odd booby traps for someone who does want to make this combination work. vfs_submount still needs improvements to allow this combination to work, and vfs_submount contains a check that presents a warning. The autofs4 filesystem could be modified to set FS_USERNS_MOUNT and it would need not work on this code path, as userspace performs the mounts. Fixes: 93faccbb ("fs: Better permission checking for submounts") Fixes: aeaa4a79 ("fs: Call d_automount with the filesystems creds") Acked-by:
Ian Kent <raven@themaw.net> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Jagdish Gediya authored
[ Upstream commit bccb06c3 ] Bufnum mask is used to calculate page position in the internal SRAM. As IFC version 2.0.0 has 16KB of internal SRAM as compared to older versions which had 8KB. Hence bufnum mask needs to be updated. Signed-off-by:
Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by:
Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Andrew F. Davis authored
[ Upstream commit 7be4b5dc ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 14e3e295 ("ARM: dts: omap3-n900: Add TLV320AIC3X support") Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andrew F. Davis authored
[ Upstream commit e153db03 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 4341881d ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by:
-
Sunil Goutham authored
[ Upstream commit 87de0838 ] on T81 there are only 4 cores, hence setting max queue count to 4 would leave nothing for XDP_TX. This patch fixes this by doubling max queue count in above scenarios. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
cjacob <cjacob@caviumnetworks.com> Signed-off-by:
Aleksey Makarov <aleksey.makarov@cavium.com> Signed-off-by:
-
Miquel Raynal authored
[ Upstream commit df467899 ] Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE and a column address and expect the controller to only send address cycles. Right now, the default ->cmdfunc() implementations provided by the core do not filter out the command cycle in this case and forwards the request to the controller driver through the ->cmd_ctrl() method. The thing is, NAND controller drivers can get this wrong and send a command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is -1, and the command field is usually casted to an u8, we end up sending the 0xFF command which is actually a RESET operation. Add conditions in nand_command[_lp]() functions to sending the initial command cycle when command == NAND_CMD_NONE. Signed-off-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
-
Lorenzo Colitti authored
[ Upstream commit be8f8284 ] Currently it is possible to add or update socket policies, but not clear them. Therefore, once a socket policy has been applied, the socket cannot be used for unencrypted traffic. This patch allows (privileged) users to clear socket policies by passing in a NULL pointer and zero length argument to the {IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both the incoming and outgoing policies being cleared. The simple approach taken in this patch cannot clear socket policies in only one direction. If desired this could be added in the future, for example by continuing to pass in a length of zero (which currently is guaranteed to return EMSGSIZE) and making the policy be a pointer to an integer that contains one of the XFRM_POLICY_{IN,OUT} enum values. An alternative would have been to interpret the length as a signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output policy. Tested: https://android-review.googlesource.com/539816Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Michael Hennerich authored
[ Upstream commit 388b3b2b ] This fixes undefined reference to struct adf7242_local *lp in case DEBUG is defined. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by:
-
Luis R. Rodriguez authored
[ Upstream commit 65c79230 ] The file /sys/module/firmware_class/parameters/path can be used to set a custom firmware path. The fw_filesystem.sh script creates a temporary directory to add a test firmware file to be used during testing, in order for this to work it uses the custom path syfs file and it was supposed to reset back the file on execution exit. The script failed to do this due to a typo, it was using OLD_PATH instead of OLD_FWPATH, since its inception since v3.17. Its not as easy to just keep the old setting, it turns out that resetting an empty setting won't actually do what we want, we need to check if it was empty and set an empty space. Without this we end up having the temporary path always set after we run these tests. Fixes: 0a8adf58 ("test: add firmware_class loader test") Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit a0982dfa ] The rcutorture test suite occasionally provokes a splat due to invoking resched_cpu() on an offline CPU: WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff902ede9daf00 task.stack: ffff96c50010c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096 RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003 RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001 R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240 FS: 0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0 Call Trace: resched_curr+0x8f/0x1c0 resched_cpu+0x2c/0x40 rcu_implicit_dynticks_qs+0x152/0x220 force_qs_rnp+0x147/0x1d0 ? sync_rcu_exp_select_cpus+0x450/0x450 rcu_gp_kthread+0x5a9/0x950 kthread+0x142/0x180 ? force_qs_rnp+0x1d0/0x1d0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48 ---[ end trace 26df9e5df4bba4ac ]--- This splat cannot be generated by expedited grace periods because they always invoke resched_cpu() on the current CPU, which is good because expedited grace periods require that resched_cpu() unconditionally succeed. However, other parts of RCU can tolerate resched_cpu() acting as a no-op, at least as long as it doesn't happen too often. This commit therefore makes resched_cpu() invoke resched_curr() only if the CPU is either online or is the current CPU. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit 2fe25826 ] The rcutorture test suite occasionally provokes a splat due to invoking rt_mutex_lock() which needs to boost the priority of a task currently sitting on a runqueue that belongs to an offline CPU: WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082 RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004 RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200 FS: 0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0 Call Trace: resched_curr+0x61/0xd0 switched_to_rt+0x8f/0xa0 rt_mutex_setprio+0x25c/0x410 task_blocks_on_rt_mutex+0x1b3/0x1f0 rt_mutex_slowlock+0xa9/0x1e0 rt_mutex_lock+0x29/0x30 rcu_boost_kthread+0x127/0x3c0 kthread+0x104/0x140 ? rcu_report_unblock_qs_rnp+0x90/0x90 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x30 Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48 But the target task's priority has already been adjusted, so the only purpose of switched_to_rt() invoking resched_curr() is to wake up the CPU running some task that needs to be preempted by the boosted task. But the CPU is offline, which presumably means that the task must be migrated to some other CPU, and that this other CPU will undertake any needed preemption at the time of migration. Because the runqueue lock is held when resched_curr() is invoked, we know that the boosted task cannot go anywhere, so it is not necessary to invoke resched_curr() in this particular case. This commit therefore makes switched_to_rt() refrain from invoking resched_curr() when the target CPU is offline. Signed-off-by:
-
Simon Shields authored
[ Upstream commit 1b377924 ] Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used on early revisions of the board. Fixes: 420ae845 ("ARM: dts: exynos4412-trats2: add panel node") Signed-off-by:
Simon Shields <simon@lineageos.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Yixun Lan authored
[ Upstream commit 75eccf5e ] According to the datasheet, in Meson-GXBB/GXL series, The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22], while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10]. Test passed at gxl-s905x-p212 board. The following published datasheets are wrong and should be updated [1] GXBB v1.1.4 [2] GXL v0.3_20170314 Fixes: 738f66d3 ("clk: gxbb: add AmLogic GXBB clk controller driver") Tested-by:
Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit 992172e3 ] When we are in a search cycle, we try different combinations of parameters. Those combinations are called 'columns'. When we switch to a new column, we first need to check if this column has a suitable rate, if not, we can't try it. This means we must not erase the statistics we gathered for the previous column until we are sure that we are indeed switching column. The code that tries to switch to a new column first sets a whole bunch of things for the new column, and only then checks that we can find suitable rates in that column. While doing that, the code mistakenly erased the rate statistics. This code was right until struct iwl_scale_tbl_info grew up for TPC. Fix this to make sure we don't erase the rate statistics until we are sure that we can indeed switch to the new column. Note that this bug is really harmless since it causes a change in the behavior only when we can't find any rate in the new column which should really not happen. In the case we do find a suitable we reset the rate statistics a few lines later anyway. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jiri Kosina authored
[ Upstream commit 9abd04af ] ELO devices have one Button usage in GenDesk field, which makes hid-input map it to BTN_LEFT; that confuses userspace, which then considers the device to be a mouse/touchpad instead of touchscreen. Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 593f4b19 ] HDMI 2.0 Appendix F suggest that we should keep sending the infoframe when switching from 3D to 2D mode, even if the infoframe isn't strictly necessary (ie. not needed to transmit the VIC or stereo information). This is a workaround against some sinks that fail to realize that they should switch from 3D to 2D mode when the source stop transmitting the infoframe. v2: Handle unpack() as well Pull the length calculation into a helper Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> #v1 Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-2-ville.syrjala@linux.intel.comReviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Jani Nikula authored
[ Upstream commit 1d1c3665 ] Since drm_edid_to_eld() knows the connector type, we can set the type in ELD while at it. Most connectors this gets called on are not DP encoders, and with the HDMI type being 0, this does not change behaviour for non-DP. For i915 having this in place earlier would have saved a considerable amount of debugging that lead to the fix 2d8f6329 ("drm/i915: always update ELD connector type after get modes"). I don't see other drivers, even the ones calling drm_edid_to_eld() on DP connectors, setting the connector type in ELD. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.comSigned-off-by:
-
Ganapathi Bhat authored
[ Upstream commit ecd7eb7c ] We have to use start port, for TX/RX of single packet, instead of current aggregating port. This will fix SDIO CMD53(TX/RX) returning -ETIMEDOUT and halting the data path. Fixes: 0cb52aac ("mwifiex: do not set multiport flag for tx/rx single packet") Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit db49a717 ] (This is a patch has been sitting in the Intel CQM/CMT driver series for a while, despite not depend on it. Sending it now independently since the series is being discarded.) When an event is in error state, read() returns 0 instead of sizeof() buffer. In certain modes, such as interval printing, ignoring the 0 return value may cause bogus count deltas to be computed and thus invalid results printed. This patch fixes this problem by modifying read_counters() to mark the event as not scaled (scaled = -1) to force the printout routine to show <NOT COUNTED>. Signed-off-by:
Stephane Eranian <eranian@google.com> Reviewed-by:
David Carrillo-Cisneros <davidcc@google.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170412182301.44406-1-davidcc@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Dedy Lansky authored
[ Upstream commit 0f6edfe2 ] In case count is not multiple of 4, there is a read access in wil_memcpy_toio_32() from outside src buffer boundary. In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is a write access to outside dst io memory boundary. Fix these issues with proper handling of the last 1 to 4 copied bytes. Signed-off-by:
Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
-
Hamad Kadmany authored
[ Upstream commit b819447d ] Existing code that ignores connection events during reset flow will never take effect since it locks the same mutex taken by the reset flow. In addition, in case of unsolicited disconnect events ignore those as well since device is about to get reset. Signed-off-by:
Hamad Kadmany <qca_hkadmany@qca.qualcomm.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
[ Upstream commit 62ca0690 ] In 'ath10k_ce_alloc_pipe' the compile time sanity check to ensure that there is sufficient buffers in CE4 for HTT Tx MSDU descriptors, but this did not take into account of the case with 'peer flow control' enabled, fix this. Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 1d5e9f80 ] When channel contexts are used, there's no global power level (the power_level is always 0). Use the per-interface TX power in mac80211_hwsim to have a proper setting for both cases. This fixes the bgscan_simple and bgscan_learn test cases when the number of channels advertised by hwsim is >1 by default. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Michael Scott authored
[ Upstream commit d2891c4d ] When adding 6lowpan devices very rapidly we sometimes see a crash: [23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1 [23122.315400] Hardware name: HiKey Development Board (DT) [23122.320623] task: ffff800075443080 task.stack: ffff800075484000 [23122.326551] PC is at expire_timers+0x70/0x150 [23122.330907] LR is at run_timer_softirq+0xa0/0x1a0 [23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5 This was due to add_peer_chan() unconditionally initializing the lowpan_btle_dev->notify_peers delayed work structure, even if the lowpan_btle_dev passed into add_peer_chan() had previously been initialized. Normally, this would go unnoticed as the delayed work timer is set for 100 msec, however when calling add_peer_chan() faster than 100 msec it clears out a previously queued delay work causing the crash above. To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed in so that it only performs the delay work initialization when needed. Signed-off-by:
Michael Scott <michael.scott@linaro.org> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Dean Jenkins authored
[ Upstream commit 27bfbc21 ] There is a race condition between a thread calling bt_accept_dequeue() and a different thread calling bt_accept_unlink(). Protection against concurrency is implemented using sk locking. However, sk locking causes serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads. This serialisation can cause bt_accept_dequeue() to obtain the sk from the parent list but becomes blocked waiting for the sk lock held by the bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread releases the sk lock unblocking bt_accept_dequeue() which potentially runs bt_accept_unlink() again on the same sk causing a crash. The attempt to double unlink the same sk from the parent list can cause a NULL pointer dereference crash due to bt_sk(sk)->parent becoming NULL on the first unlink, followed by the second unlink trying to execute bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes. When sk is in the parent list, bt_sk(sk)->parent will be not be NULL. When sk is removed from the parent list, bt_sk(sk)->parent is set to NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being NULL to ensure that sk is still in the parent list after the sk lock has been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as being NULL then restart the loop so that the loop variables are refreshed to use the latest values. This is necessary as list_for_each_entry_safe() is not thread safe so causing a risk of an infinite loop occurring as sk could point to itself. In addition, in bt_accept_dequeue() increase the sk reference count to protect against early freeing of sk. Early freeing can be possible if the bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill() functions before bt_accept_dequeue() gets the sk lock. For test purposes, the probability of failure can be increased by putting a msleep of 1 second in bt_accept_dequeue() between getting the sk and waiting for the sk lock. This exposes the fact that the loop list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from threads that unlink sk from the list in parallel with the loop which can cause sk to become stale within the loop. Signed-off-by:
Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by:
-
