Skip to content

L
linux
Switch branch/tag
  1. 07 Sep, 2023 13 commits
  3. 06 Sep, 2023 23 commits
    • Pablo Neira Ayuso's avatar
      netfilter: nf_tables: Unbreak audit log reset · 9b5ba5c9
      Pablo Neira Ayuso authored 
      Deliver audit log from __nf_tables_dump_rules(), table dereference at
the end of the table list loop might point to the list head, leading to
this crash.

[ 4137.407349] BUG: unable to handle page fault for address: 00000000001f3c50
[ 4137.407357] #PF: supervisor read access in kernel mode
[ 4137.407359] #PF: error_code(0x0000) - not-present page
[ 4137.407360] PGD 0 P4D 0
[ 4137.407363] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4137.407365] CPU: 4 PID: 500177 Comm: nft Not tainted 6.5.0+ #277
[ 4137.407369] RIP: 0010:string+0x49/0xd0
[ 4137.407374] Code: ff 77 36 45 89 d1 31 f6 49 01 f9 66 45 85 d2 75 19 eb 1e 49 39 f8 76 02 88 07 48 83 c7 01 83 c6 01 48 83 c2 01 4c 39 cf 74 07 <0f> b6 02 84 c0 75 e2 4c 89 c2 e9 58 e5 ff ff 48 c7 c0 0e b2 ff 81
[ 4137.407377] RSP: 0018:ffff8881179737f0 EFLAGS: 00010286
[ 4137.407379] RAX: 00000000001f2c50 RBX: ffff888117973848 RCX: ffff0a00ffffff04
[ 4137.407380] RDX: 00000000001f3c50 RSI: 0000000000000000 RDI: 0000000000000000
[ 4137.407381] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffffffff
[ 4137.407383] R10: ffffffffffffffff R11: ffff88813584d200 R12: 0000000000000000
[ 4137.407384] R13: ffffffffa15cf709 R14: 0000000000000000 R15: ffffffffa15cf709
[ 4137.407385] FS:  00007fcfc18bb580(0000) GS:ffff88840e700000(0000) knlGS:0000000000000000
[ 4137.407387] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4137.407388] CR2: 00000000001f3c50 CR3: 00000001055b2001 CR4: 00000000001706e0
[ 4137.407390] Call Trace:
[ 4137.407392]  <TASK>
[ 4137.407393]  ? __die+0x1b/0x60
[ 4137.407397]  ? page_fault_oops+0x6b/0xa0
[ 4137.407399]  ? exc_page_fault+0x60/0x120
[ 4137.407403]  ? asm_exc_page_fault+0x22/0x30
[ 4137.407408]  ? string+0x49/0xd0
[ 4137.407410]  vsnprintf+0x257/0x4f0
[ 4137.407414]  kvasprintf+0x3e/0xb0
[ 4137.407417]  kasprintf+0x3e/0x50
[ 4137.407419]  nf_tables_dump_rules+0x1c0/0x360 [nf_tables]
[ 4137.407439]  ? __alloc_skb+0xc3/0x170
[ 4137.407442]  netlink_dump+0x170/0x330
[ 4137.407447]  __netlink_dump_start+0x227/0x300
[ 4137.407449]  nf_tables_getrule+0x205/0x390 [nf_tables]

Deliver audit log only once at the end of the rule dump+reset for
consistency with the set dump+reset.

Ensure audit reset access to table under rcu read side lock. The table
list iteration holds rcu read lock side, but recent audit code
dereferences table object out of the rcu read lock side.

Fixes: ea078ae9 ("netfilter: nf_tables: Audit log rule reset")
Fixes: 7e9be112 ("netfilter: nf_tables: Audit log setelem reset")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
Acked-by: default avatarPhil Sutter <phil@nwl.cc>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      9b5ba5c9
    • Kyle Zeng's avatar
      netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c · 050d91c0
      Kyle Zeng authored 
      The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can
lead to the use of wrong `CIDR_POS(c)` for calculating array offsets,
which can lead to integer underflow. As a result, it leads to slab
out-of-bound access.
This patch adds back the IP_SET_HASH_WITH_NET0 macro to
ip_set_hash_netportnet to address the issue.

Fixes: 886503f3 ("netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net")
Suggested-by: default avatarJozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: default avatarKyle Zeng <zengyhkyle@gmail.com>
Acked-by: default avatarJozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      050d91c0
    • Pablo Neira Ayuso's avatar
      netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction · 2ee52ae9
      Pablo Neira Ayuso authored 
      New elements in this transaction might expired before such transaction
ends. Skip sync GC for such elements otherwise commit path might walk
over an already released object. Once transaction is finished, async GC
will collect such expired element.

Fixes: f6c383b8 ("netfilter: nf_tables: adapt set backend to use GC transaction API")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      2ee52ae9
    • Phil Sutter's avatar
      netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID · fdc04cc2
      Phil Sutter authored 
      Add a brief description to the enum's comment.

Fixes: 837830a4 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: default avatarPhil Sutter <phil@nwl.cc>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      fdc04cc2
    • Wander Lairson Costa's avatar
      netfilter: nfnetlink_osf: avoid OOB read · f4f8a780
      Wander Lairson Costa authored 
      The opt_num field is controlled by user mode and is not currently
validated inside the kernel. An attacker can take advantage of this to
trigger an OOB read and potentially leak information.

BUG: KASAN: slab-out-of-bounds in nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
Read of size 2 at addr ffff88804bc64272 by task poc/6431

CPU: 1 PID: 6431 Comm: poc Not tainted 6.0.0-rc4 #1
Call Trace:
 nf_osf_match_one+0xbed/0xd10 net/netfilter/nfnetlink_osf.c:88
 nf_osf_find+0x186/0x2f0 net/netfilter/nfnetlink_osf.c:281
 nft_osf_eval+0x37f/0x590 net/netfilter/nft_osf.c:47
 expr_call_ops_eval net/netfilter/nf_tables_core.c:214
 nft_do_chain+0x2b0/0x1490 net/netfilter/nf_tables_core.c:264
 nft_do_chain_ipv4+0x17c/0x1f0 net/netfilter/nft_chain_filter.c:23
 [..]

Also add validation to genre, subtype and version fields.

Fixes: 11eeef41 ("netfilter: passive OS fingerprint xtables match")
Reported-by: default avatarLucas Leong <wmliang@infosec.exchange>
Signed-off-by: default avatarWander Lairson Costa <wander@redhat.com>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      f4f8a780
    • Florian Westphal's avatar
      netfilter: nftables: exthdr: fix 4-byte stack OOB write · fd94d9da
      Florian Westphal authored 
      If priv->len is a multiple of 4, then dst[len / 4] can write past
the destination array which leads to stack corruption.

This construct is necessary to clean the remainder of the register
in case ->len is NOT a multiple of the register size, so make it
conditional just like nft_payload.c does.

The bug was added in 4.1 cycle and then copied/inherited when
tcp/sctp and ip option support was added.

Bug reported by Zero Day Initiative project (ZDI-CAN-21950,
ZDI-CAN-21951, ZDI-CAN-21961).

Fixes: 49499c3e ("netfilter: nf_tables: switch registers to 32 bit addressing")
Fixes: 935b7f64 ("netfilter: nft_exthdr: add TCP option matching")
Fixes: 133dc203 ("netfilter: nft_exthdr: Support SCTP chunks")
Fixes: dbb5281a ("netfilter: nf_tables: add support for matching IPv4 options")
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      fd94d9da
    • Martin KaFai Lau's avatar
      selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc · a96d1cfb
      Martin KaFai Lau authored 
      This patch checks the sk_omem_alloc has been uncharged by bpf_sk_storage
during the __sk_destruct.
Signed-off-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-4-martin.lau@linux.dev
      a96d1cfb
    • Martin KaFai Lau's avatar
      bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc · 55d49f75
      Martin KaFai Lau authored 
      The commit c83597fa ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.

This missing uncharge only happens when the sk is going away (during
__sk_destruct).

This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.

A selftest is added in the next patch.

Fixes: c83597fa ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
      55d49f75
    • Martin KaFai Lau's avatar
      bpf: bpf_sk_storage: Fix invalid wait context lockdep report · a96a44ab
      Martin KaFai Lau authored 
      './test_progs -t test_local_storage' reported a splat:

[   27.137569] =============================
[   27.138122] [ BUG: Invalid wait context ]
[   27.138650] 6.5.0-03980-gd11ae1b1 #247 Tainted: G           O
[   27.139542] -----------------------------
[   27.140106] test_progs/1729 is trying to lock:
[   27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[   27.141834] other info that might help us debug this:
[   27.142437] context-{5:5}
[   27.142856] 2 locks held by test_progs/1729:
[   27.143352]  #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[   27.144492]  #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[   27.145855] stack backtrace:
[   27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G           O       6.5.0-03980-gd11ae1b1 #247
[   27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[   27.149127] Call Trace:
[   27.149490]  <TASK>
[   27.149867]  dump_stack_lvl+0x130/0x1d0
[   27.152609]  dump_stack+0x14/0x20
[   27.153131]  __lock_acquire+0x1657/0x2220
[   27.153677]  lock_acquire+0x1b8/0x510
[   27.157908]  local_lock_acquire+0x29/0x130
[   27.159048]  obj_cgroup_charge+0xf4/0x3c0
[   27.160794]  slab_pre_alloc_hook+0x28e/0x2b0
[   27.161931]  __kmem_cache_alloc_node+0x51/0x210
[   27.163557]  __kmalloc+0xaa/0x210
[   27.164593]  bpf_map_kzalloc+0xbc/0x170
[   27.165147]  bpf_selem_alloc+0x130/0x510
[   27.166295]  bpf_local_storage_update+0x5aa/0x8e0
[   27.167042]  bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[   27.169199]  bpf_map_update_value+0x415/0x4f0
[   27.169871]  map_update_elem+0x413/0x550
[   27.170330]  __sys_bpf+0x5e9/0x640
[   27.174065]  __x64_sys_bpf+0x80/0x90
[   27.174568]  do_syscall_64+0x48/0xa0
[   27.175201]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[   27.175932] RIP: 0033:0x7effb40e41ad
[   27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[   27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[   27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[   27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[   27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[   27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[   27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[   27.184958]  </TASK>

It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.

raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.

The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.

This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.

This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.

Fixes: b00fa38a ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: default avatarMartin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
      a96a44ab
    • Ilya Leoshkevich's avatar
      s390/bpf: Pass through tail call counter in trampolines · a192103a
      Ilya Leoshkevich authored 
      s390x eBPF programs use the following extension to the s390x calling
convention: tail call counter is passed on stack at offset
STK_OFF_TCCNT, which callees otherwise use as scratch space.

Currently trampoline does not respect this and clobbers tail call
counter. This breaks enforcing tail call limits in eBPF programs, which
have trampolines attached to them.

Fix by forwarding a copy of the tail call counter to the original eBPF
program in the trampoline (for fexit), and by restoring it at the end
of the trampoline (for fentry).

Fixes: 528eb2cb ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: default avatarLeon Hwang <hffilwlqm@gmail.com>
Signed-off-by: default avatarIlya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230906004448.111674-1-iii@linux.ibm.com
      a192103a
    • Sebastian Andrzej Siewior's avatar
      bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check. · 6764e767
      Sebastian Andrzej Siewior authored 
      __bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.

__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.

Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.

Fixes: e384c7b7 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
      6764e767
    • Sebastian Andrzej Siewior's avatar
      bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf(). · 7645629f
      Sebastian Andrzej Siewior authored 
      If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).

This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.

Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.

Fixes: b1d18a75 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarJiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
      7645629f
    • Jakub Kicinski's avatar
      net: phylink: fix sphinx complaint about invalid literal · 1a961e74
      Jakub Kicinski authored 
      sphinx complains about the use of "%PHYLINK_PCS_NEG_*":

Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string.
Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string.

These are not valid symbols so drop the '%' prefix.

Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *)
or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already
a handful of un-adorned DEFINE_* in this file.

Fixes: f99d471a ("net: phylink: add PCS negotiation mode")
Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Reviewed-by: default avatarBagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a961e74
    • David S. Miller's avatar
      Merge branch 'sja1105-fixes' · f8fdd54e
      David S. Miller authored 
      Vladimir Oltean says:

====================
tc-cbs offload fixes for SJA1105 DSA

Yanan Yang has pointed out to me that certain tc-cbs offloaded
configurations do not appear to do any shaping on the LS1021A-TSN board
(SJA1105T).

This is due to an apparent documentation error that also made its way
into the driver, which patch 1/3 now fixes.

While investigating and then testing, I've found 2 more bugs, which are
patches 2/3 and 3/3.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8fdd54e
    • Vladimir Oltean's avatar
      net: dsa: sja1105: complete tc-cbs offload support on SJA1110 · 180a7419
      Vladimir Oltean authored 
      The blamed commit left this delta behind:

  struct sja1105_cbs_entry {
 -	u64 port;
 -	u64 prio;
 +	u64 port; /* Not used for SJA1110 */
 +	u64 prio; /* Not used for SJA1110 */
  	u64 credit_hi;
  	u64 credit_lo;
  	u64 send_slope;
  	u64 idle_slope;
  };

but did not actually implement tc-cbs offload fully for the new switch.
The offload is accepted, but it doesn't work.

The difference compared to earlier switch generations is that now, the
table of CBS shapers is sparse, because there are many more shapers, so
the mapping between a {port, prio} and a table index is static, rather
than requiring us to store the port and prio into the sja1105_cbs_entry.

So, the problem is that the code programs the CBS shaper parameters at a
dynamic table index which is incorrect.

All that needs to be done for SJA1110 CBS shapers to work is to bypass
the logic which allocates shapers in a dense manner, as for SJA1105, and
use the fixed mapping instead.

Fixes: 3e77e59b ("net: dsa: sja1105: add support for the SJA1110 switch family")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      180a7419
    • Vladimir Oltean's avatar
      net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many times · 894cafc5
      Vladimir Oltean authored 
      After running command [2] too many times in a row:

[1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \
	map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
[2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \
	idleslope 120000 sendslope -880000 locredit -1320 hicredit 180

(aka more than priv->info->num_cbs_shapers times)

we start seeing the following error message:

Error: Specified device failed to setup cbs hardware offload.

This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.

Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      894cafc5
    • Vladimir Oltean's avatar
      net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload · 954ad9bf
      Vladimir Oltean authored 
      More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.

The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.

The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".

Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".

So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.

I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.

So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.

Some numerical data points:

 40Mbps stream, max interfering frame size 1500, port speed 100M
 ---------------------------------------------------------------

 tc-cbs parameters:
 idleslope 40000 sendslope -60000 locredit -900 hicredit 600

 which result in hardware values:

 Before (doesn't work)           After (works)
 credit_hi    600                600
 credit_lo    900                900
 send_slope   7500000            75
 idle_slope   5000000            50

 40Mbps stream, max interfering frame size 1500, port speed 1G
 -------------------------------------------------------------

 tc-cbs parameters:
 idleslope 40000 sendslope -960000 locredit -1440 hicredit 60

 which result in hardware values:

 Before (doesn't work)           After (works)
 credit_hi    60                 60
 credit_lo    1440               1440
 send_slope   120000000          120
 idle_slope   5000000            5

 5.12Mbps stream, max interfering frame size 1522, port speed 100M
 -----------------------------------------------------------------

 tc-cbs parameters:
 idleslope 5120 sendslope -94880 locredit -1444 hicredit 77

 which result in hardware values:

 Before (doesn't work)           After (works)
 credit_hi    77                 77
 credit_lo    1444               1444
 send_slope   11860000           118
 idle_slope   640000             6

Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.

Fixes: 4d752508 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Reported-by: default avatarYanan Yang <yanan.yang@nxp.com>
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      954ad9bf
    • David S. Miller's avatar
      Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · ca7cfd73
      David S. Miller authored 
      Tony Nguyen says:

====================
Change MIN_TXD and MIN_RXD to allow set rx/tx value between 64 and 80

Olga Zaborska says:

Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb, igbvf and igc devices can use as low as 64
descriptors.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ca7cfd73
    • Bodong Wang's avatar
      mlx5/core: E-Switch, Create ACL FT for eswitch manager in switchdev mode · 34413460
      Bodong Wang authored 
      ACL flow table is required in switchdev mode when metadata is enabled,
driver creates such table when loading each vport. However, not every
vport is loaded in switchdev mode. Such as ECPF if it's the eswitch manager.
In this case, ACL flow table is still needed.

To make it modularized, create ACL flow table for eswitch manager as
default and skip such operations when loading manager vport.

Also, there is no need to load the eswitch manager vport in switchdev mode.
This means there is no need to load it on regular connect-x HCAs where
the PF is the eswitch manager. This will avoid creating duplicate ACL
flow table for host PF vport.

Fixes: 29bcb6e4 ("net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules")
Fixes: eb8e9fae ("mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager")
Fixes: 5019833d ("net/mlx5: E-switch, Introduce helper function to enable/disable vports")
Signed-off-by: default avatarBodong Wang <bodong@nvidia.com>
Reviewed-by: default avatarMark Bloch <mbloch@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34413460
    • Jianbo Liu's avatar
      net/mlx5e: Clear mirred devices array if the rule is split · b7558a77
      Jianbo Liu authored 
      In the cited commit, the mirred devices are recorded and checked while
parsing the actions. In order to avoid system crash, the duplicate
action in a single rule is not allowed.

But the rule is actually break down into several FTEs in different
tables, for either mirroring, or the specified types of actions which
use post action infrastructure.

It will reject certain action list by mistake, for example:
    actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1.
Here the rule is split to two FTEs because of pedit action.

To fix this issue, when parsing the rule actions, reset if_count to
clear the mirred devices array if the rule is split to multiple
FTEs, and then the duplicate checking is restarted.

Fixes: 554fe75c ("net/mlx5e: Avoid duplicating rule destinations")
Signed-off-by: default avatarJianbo Liu <jianbol@nvidia.com>
Reviewed-by: default avatarVlad Buslov <vladbu@nvidia.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b7558a77
    • Eric Dumazet's avatar
      ip_tunnels: use DEV_STATS_INC() · 9b271eba
      Eric Dumazet authored 
      syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1]

This can run from multiple cpus without mutual exclusion.

Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.

[1]
BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit

read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

value changed: 0x0000000000018830 -> 0x0000000000018831

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6e #0

Fixes: 039f5062 ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b271eba
    • Taehee Yoo's avatar
      net: team: do not use dynamic lockdep key · 39285e12
      Taehee Yoo authored 
      team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
  |
team1

Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.

So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.

When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.

In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.

As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.

The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.

The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.

Reproducer:
   for i in {0..1000}
   do
           ip link add team$i type team
           ip link add dummy$i master team$i type dummy
           ip link set dummy$i up
           ip link set team$i up
   done

Splat looks like:
   BUG: MAX_LOCKDEP_ENTRIES too low!
   turning off the locking correctness validator.
   Please attach the output of /proc/lock_stat to the bug report
   CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
   Call Trace:
    <TASK>
   dump_stack_lvl+0x64/0xb0
   add_lock_to_list+0x30d/0x5e0
   check_prev_add+0x73a/0x23a0
   ...
   sock_def_readable+0xfe/0x4f0
   netlink_broadcast+0x76b/0xac0
   nlmsg_notify+0x69/0x1d0
   dev_open+0xed/0x130
   ...

Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes: 369f61be ("team: fix nested locking lockdep warning")
Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      39285e12
    • Quan Tian's avatar
      net/ipv6: SKB symmetric hash should incorporate transport ports · a5e2151f
      Quan Tian authored 
      __skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit eb70db87
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.

As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.

Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.

Fixes: eb70db87 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: default avatarLars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457Signed-off-by: default avatarQuan Tian <qtian@vmware.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5e2151f
  5. 05 Sep, 2023 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7