- 03 Jan, 2005 40 commits
-
-
Hirokazu Takata authored
- Add #ifdef __KERNEL__ - Change __inline__ to inline for __KERNEL__ portion. - Remove RCS ID string. Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Hirokazu Takata authored
- Remove _PAGE_USER bit from pte. - The m32r doesn't support _PAGE_USER bit by hardware. Signed-off-by:
-
Hirokazu Takata authored
- Support PAGE_NONE attribute for memory protection. - Add _PAGE_PROTNONE bit to pte (software bit). Signed-off-by:
NIIBE Yutaka <gniibe@fsij.org> Signed-off-by:
-
Hirokazu Takata authored
- Change PAGE_*_X to PAGE_*_EXEC for good readability. - Add #include __KERNEL__ - Change __inline__ to inline for the __KERNEL__ portion. Signed-off-by:
-
Hirokazu Takata authored
- Fix a typo: ACE_USEMODE --> ACE_USERMODE. - Update copyright statement, and so on. Signed-off-by:
-
Hirokazu Takata authored
- To be more comprehensive, keep ACE_INSTRUCTION (access exception on instruction execution) information in thread_info->flags, instead of encoding it into address parameter. Signed-off-by:
-
Hirokazu Takata authored
- Cause a segmentation fault for an illegal execution of a code on non-executable memory page. Signed-off-by:
Naoto Sugai <sugai@isl.melco.co.jp> Signed-off-by:
-
Hirokazu Takata authored
This patch updates ptrace.c to support multithread debugging. So far, only one breakpoint's location was kept by kernel, however, in the multithreaded application's debug, it is required to kept multi-point breakpoint locations by kernel. In this implementation, maximum number of MAX_TRAPS(=10 (by default)) breakpoint's information will be kept in the "debug_trap" member of the thread_struct for each thread. * include/asm-m32r/processor.h: Modify debug_trap struct to keep multipoint breakpoint locations for multithread debugging. * arch/m32r/kernel/ptrace.c: - Update to support multithread debugging. - Remove unused functions, withdraw_debug_trap_for_signal() and embed_debug_trap_for_signal(). Signed-off-by:
Kei Sakamoto <ksakamot@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
This patch updates include/asm-m32r/pgtable.h to add pgprot_noncached(). It is required to fix a problem of an userspace application, which mmaps io registers. This patch also modifies drivers/video/fbmem.c to support noncachable framebuffer access for m32r. In this routine, pgprot_writecombine() is used hopefully, even though the current m32r never does write-combining or write-coalescing... Please apply this. * include/asm-m32r/pgtable.h (pgprot_noncached, pgprot_writecombine): Newly added. * drivers/video/fbmem.c (fb_mmap): Add m32r support. Signed-off-by:
Mamoru Sakugawa <sakugawa@linux-m32r.org> Signed-off-by:
-
Hirokazu Takata authored
include/asm-m32r/elf.h: Add relocations R_M32R_GOTOFF_HI_ULO, R_M32R_GOTOFF_HI_SLO, and R_M32R_GOTOFF_LO. These relocations are required to implement GOTOFF support for m32r. Signed-off-by:
-
Andrew Morton authored
In file included from include/linux/ptrace.h:77, from arch/ppc64/lib/sstep.c:12: include/linux/sched.h: In function `freeze_processes': include/linux/sched.h:1189: warning: no return statement in function returning non-void Signed-off-by: -
Pavel Machek authored
This moves refrigerator changes to sched.h, so that every file user of refrigerator does not have to include suspend.h, and makes refrigerator support easier by introducing try_to_freeze. Adapted from patch by Nigel Cunningham Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Pavel Machek authored
Some machines are spending minutes of CPU time during suspend in stupid O(n^2) algorithm. This patch replaces it with O(n) algorithm, making swsusp usable to some people. Signed-off-by:
-
Pavel Machek authored
This adds statics at few places and fixes stale references to pmdisk. Signed-off-by:
-
Pavel Machek authored
swsusp contains few one-line helpers that only make reading/understanding code more difficult. Also warn the user when something goes wrong, instead of waking machine with corrupt data. Signed-off-by:
-
Pavel Machek authored
Variable used only for writing is bad idea. Signed-off-by:
-
Pavel Machek authored
At few points we still reference to swsusp as "pmdisk"... it might confuse someone not knowing full history. Signed-off-by:
-
Russell King authored
arch/arm/common/sa1111.c: In function `sa1111_suspend': arch/arm/common/sa1111.c:816: warning: assignment from incompatible pointer type This is a rather annoying, and IMHO pointless warning. First question: what is the reasoning for using an array of unsigned bytes here? Are we expecting to power manage devices which only have byte wide registers? In reality, devices have half-word and word sized registers as well, which means that dev->power.saved_state actually points to device specific data (or even device driver specific data) for the device. As such, it makes far more sense for this to be a 'void *'. I'd rather not go around the ARM kernel tree adding pointless casts to 'u8 *' and back again because the wrong type for this was picked in the structure definition, so here's a patch which changes this to void *. Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Bjorn Helgaas authored
This is only used by the ia64 early_printk patch, which isn't in the mainline tree. If anybody is still using that patch, hcdp_early_uart() should be incorporated into it. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Ian Molton authored
Some long overdue updates to this file. newer macros taken from arm32. Signed-off-by:
-
Ian Molton authored
Better put_user macro. Signed-off-by:
-
Ian Molton authored
A keep-it-compiling patch based on the arm32 code. Signed-off-by:
-
Ian Molton authored
ARM26 systems only have one possible clock, thus we can merge all this into one source file and drop the ability to dynamically alter it. Signed-off-by:
-
Ian Molton authored
The arm26 version of this had become horribly out of date. this is a sideways-port of the arm32 version, dropping the unwanted stuff and adjusted for arm26 compatability. Signed-off-by:
-
Ian Molton authored
New irq exit handler (part of the softirq changes) Signed-off-by:
-
Ian Molton authored
Drop shark support from arm26 (shark isn't arm26 based) Signed-off-by:
-
Ian Molton authored
This diff effects a restructuring of arm26s directory layout. A number of files can now move to more logical locations, since there are no machine specific directories anymore. Signed-off-by:
-
Ian Molton authored
This pulls in the execve changes made in arm32. Also, drops some old arm32 power management stuff thats no longer relevant in process.c. Signed-off-by:
-
Ian Molton authored
This removes some unneeded definitions and makes the naming used within the file more consistent. Also adds some macros to make it easier to see how the interrupt handler is structured. The assembled output is identical to the original. Signed-off-by:
-
Ian Molton authored
Various trivial fixes required to get a clean compile. Signed-off-by:
-
Ian Molton authored
Add and update comments all throughout the arm26 tree. Signed-off-by:
-
Ian Molton authored
- Updates to makefiles required by the other changes in this patchset. - Also add some entries to the linker scripts. The linker scripts really ought to be merged into one script but that will have to wait. - Add a comment for building xipImages Update the compiler flags used to build arm26 so gcc 3.4 doesnt barf. Signed-off-by:
-
Ian Molton authored
Replace the macros for atomic ops and bring arm26 up to current definitions. make the arm26 mm code use the proper macros also. Signed-off-by:
-
Ian Molton authored
This patch drops some more stuff left over from the old combined arm26/32 architecture. Signed-off-by:
-
Yoshinori Sato authored
Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Andi Kleen authored
Eliminate some useless printks in ACPI numa.c They trigger all the time on x86-64 with CONFIG_ACPI_NUMA Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Add x86_64 support for Jack Steiner's SLIT sysfs patch Make Jack's code compile on x86-64 and add x86-64 low level support to save the SLIT pointer and a node_distance() implementation. Requires the previous SRAT patch. Signed-off-by:
-
Andi Kleen authored
Add SLIT (inter node distance) information to sysfs. [This is Jack's patch that he submitted on l-k. I'm submitting it for him because I need it for my x86-64 followon SLIT patch. Hope I don't stomp onto his toes with that one. If you already merged it please ignore] From: Jack Steiner Here is an update patch to externalize the SLIT information. I think I have encorporated all the comments that were posted previously) For example: # cd /sys/devices/system # find . ./node ./node/node5 ./node/node5/distance ./node/node5/numastat ./node/node5/meminfo ./node/node5/cpumap # cat ./node/node0/distance 10 20 64 42 42 22 # cat node/*/distance 10 20 64 42 42 22 20 10 42 22 64 84 64 42 10 20 22 42 42 22 20 10 42 62 42 64 22 42 10 20 22 84 42 62 20 10 Signed-off-by:Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Andi Kleen authored
Remove unneeded ifdef in hardirq.h I can't see any reason for the #ifdef CONFIG_X86 introduced to the x86_64 hardirq.h as part of the generic irq subsystem changes. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andi Kleen authored
Fix EM64T config description From: Xose Vazquez Perez <xose@wanadoo.es> Signed-off-by:
-
