- 01 Oct, 2012 22 commits
-
-
Chuck Lever authored
rpc_clone_client() does most of the same tasks as rpc_new_client(), so there is an opportunity for code re-use. Create a generic helper that makes it easy to clone an RPC client while replacing any of the clnt's parameters. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Some function names have changed, but debugging messages were never updated. Automate the construction of the function name in debugging messages. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: The blank space in front of the message must be spaces. Tabs show up on the console as a graphical character. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
If the state manager thread is not actually able to fully recover from some situation, it wakes up waiters, who kick off a new state manager thread. Quite often the fresh invocation of the state manager is just as successful. This results in a livelock as the client dumps thousands of NFS requests a second on the network in a vain attempt to recover. Not very friendly. To mitigate this situation, add a delay in the state manager after an unhandled error, so that the client sends just a few requests every second in this case. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
fs/nfs/super.c: In function ‘nfs_compare_remount_data’: fs/nfs/super.c:2042:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2043:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2044:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2046:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2047:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2048:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2049:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] fs/nfs/super.c:2050:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
NSM RPC client can be required on NFSv3 umount, when child reaper is dying (and destroying it's mount namespace). It means, that current nsproxy is set to NULL already, but creation of RPC client requires UTS namespace for gaining hostname string. This patch creates reference-counted per-net NSM client on first monitor request and destroys it after last unmonitor request. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Taking hostname from uts namespace if not safe, because this cuold be performind during umount operation on child reaper death. And in this case current->nsproxy is NULL already. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
NSM RPC client can be required on NFSv3 umount, when child reaper is dying (and destroying it's mount namespace). It means, that current nsproxy is set to NULL already, but creation of RPC client requires UTS namespace for gaining hostname string. This patch introduces reference counted NFS RPC clients creation and destruction helpers (similar to RPCBIND RPC clients). Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: <stable@vger.kernel.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
This patch also introduces refcount-aware nfs_callback_down_net() wrapper for svc_shutdown_net(). Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Usage coutner now increased only is the service was started sccessfully. Even if service is running already, then goto is not required anymore, because service creation and start will be skipped. With this patch code looks clearer. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
This is just a code move, which from my POW makes code looks better. I.e. now on start we have 3 different stages: 1) Service creation. 2) Service per-net data allocation. 3) Service start. Patch also renames goto label "out_err:" into "err_start:" to reflect new changes. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
No need to assign transports backchannel server explicitly in nfs41_callback_up() - there is nfs_callback_bc_serv() function for this. By using it, nfs4_callback_up() and nfs41_callback_up() can be called without transport argument. Note: service have to be passed to nfs_callback_bc_serv() instead of callback, since callback link can be uninitialized. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
v4: 1) Callback transport creation routine selection by version simlified. This new function in now called before nfs_minorversion_callback_svc_setup()). Also few small changes: 1) current network namespace in nfs_callback_up() was replaced by transport net. 2) svc_shutdown_net() was moved prior to callback usage counter decrement (because in case of per-net data allocation faulure svc_shutdown_net() have to be skipped). Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
This function creates service if it's not exist, or increase usage counter of the existent, and returns pointer to it. Usage counter will be droppepd by svc_destroy() later in nfs_callback_up(). Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Stanislav Kinsbursky authored
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Weston Andros Adamson authored
The OPEN operation has no way to differentiate an open for read and an open for execution - both look like read to the server. This allowed users to read files that didn't have READ access but did have EXEC access, which is obviously wrong. This patch adds an ACCESS call to the OPEN compound to handle the difference between OPENs for reading and execution. Since we're going through the trouble of calling ACCESS, we check all possible access bits and cache the results hopefully avoiding an ACCESS call in the future. Signed-off-by: Weston Andros Adamson <dros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
This will allocate memory that has already been zeroed, allowing us to remove the memset later on. Signed-off-by: Bryan Schumaker <bjchuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
I put the client into an open recovery loop by: Client: Open file read half Server: Expire client (echo 0 > /sys/kernel/debug/nfsd/forget_clients) Client: Drop vm cache (echo 3 > /proc/sys/vm/drop_caches) finish reading file This causes a loop because the client never updates the nfs4_state after discovering that the delegation is invalid. This means it will keep trying to read using the bad delegation rather than attempting to re-open the file. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> CC: stable@vger.kernel.org [3.4+] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
If we are reading through a delegation, and the delegation is OK then state->stateid will still point to a delegation stateid and not an open stateid. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 Sep, 2012 1 commit
-
-
Trond Myklebust authored
We shouldn't need more than 1 worker thread per cpu, since rpciod is designed to run without sleeping in most cases. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 Sep, 2012 17 commits
-
-
Trond Myklebust authored
Currently it does not do so if the RPC call failed to start. Fix is to move the decrement of plh_block_lgets into nfs4_layoutreturn_release. Also remove a redundant test of task->tk_status in nfs4_layoutreturn_done: if lrp->res.lrs_present is set, then obviously the RPC call succeeded. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Failure of the layoutreturn allocation fails is not a good reason to mark the pnfs_layout_hdr as having failed a layoutget or i/o. Just exit cleanly. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
It serves no purpose that the test for whether or not we have valid layout segments doesn't already serve. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Once all the affected layout segments have been freed up, clear the NFS_LAYOUT_BULK_RECALL flag so that we can reuse the pnfs_layout_hdr Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
We already have a mechanism for blocking LAYOUTGET by means of the plh_block_lgets counter. The only "service" that NFS_LAYOUT_DESTROYED provides at this point is to block layoutget once the layout segment list is empty, which basically means that you have to wait until the pnfs_layout_hdr is destroyed before you can do pNFS on that file again. This patch enables the reuse of the pnfs_layout_hdr if the layout segment list is empty. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
...and ditto for pnfs_free_layout_hdr() Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
These are all in static declared functions that are called only once. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Ensure that the reference count for pnfs_layout_hdr reverts to the original value after a call to pnfs_layout_remove_lseg(). Note that the caller is expected to hold a reference to the struct pnfs_layout_hdr. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
There is no longer a need to use pnfs_free_lseg_list(). Just call pnfs_free_lseg() directly. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Move the code into pnfs_free_layout_hdr(), and add checks to get_layout_by_fh_locked to ensure that they don't reference a layout that is being freed. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
None of the existing pNFS layout drivers seem to require the inode to be locked while they free the layout header. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Each layout segment already holds a reference to the pnfs_layout_hdr, so there is no need to hold an extra reference that is released once the last layout segment is freed. Ensure that pnfs_find_alloc_layout() always returns a reference to the pnfs_layout_hdr, which will be matched by the final call to pnfs_put_layout_hdr() in pnfs_update_layout(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The latter name is more descriptive of the actual function. Also rename pnfs_insert_layout to pnfs_layout_insert_lseg. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Instead of resetting the inode MDS threshold counters when we mark the layout for destruction, do it as part of freeing the layout. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In all cases where we set NFS_LAYOUT_INVALID, we also set NFS_LAYOUT_DESTROYED. Furthermore, in all cases where we test for NFS_LAYOUT_INVALID, we should also be testing for NFS_LAYOUT_DESTROYED, since the latter means that we hold no valid layout segments. Ergo the two are redundant. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Confine it to the nfs4_do_close() code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
If we sleep after dropping the inode->i_lock, then we are no longer atomic with respect to the rpc_wake_up() call in pnfs_layout_remove_lseg(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-