- 23 Mar, 2020 11 commits
-
-
Alexander Gordeev authored
In the past there were no per-CPU information in /proc/cpuinfo other than CPU frequency. Hence, for machines without CPU MHz feature there were nothing to show. Now CPU topology and IDs still could be shown, so do not skip this information from the output. Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> [heiko.carstens@de.ibm.com: moved comparison] Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com>
-
Alexander Gordeev authored
/proc/cpuinfo should not print information about CPU 0 when it is offline. Fixes: 281eaa8c ("s390/cpuinfo: simplify locking and skip offline cpus early") Signed-off-by:
-
Alexander Gordeev authored
Show number of online CPUs within a package (which is the socket in case of s390). For what it worth, present that value as "siblings" field - just like x86 does. Signed-off-by:
-
Alexander Gordeev authored
Show number of cores that run at least one SMT thread Signed-off-by:
-
Gerald Schaefer authored
Re-IPL for both CCW and FCP is currently done by using diag 308 with the "Load Clear" subcode, which means that all memory will be cleared. This can increase re-IPL duration considerably on very large machines. For CCW devices, there is also a "Load Normal" subcode that was only used for dump kernels so far. For FCP devices, a similar "Load Normal" subcode was introduced with z14. The "Load Normal" diag 308 subcode allows to re-IPL without clearing memory. This patch adds a new "clear" sysfs attribute to /sys/firmware/reipl for both the ccw and fcp subdirectories, which can be set to either "0" or "1" to disable or enable re-IPL with memory clearing. The default value is "0", which disables memory clearing. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
-
Harald Freudenberger authored
snprintf() may not always return the correct size of used bytes but instead the length the resulting string would be if it would fit into the buffer. So scnprintf() is the function to use when the real length of the resulting string is needed. Replace all occurrences of snprintf() with scnprintf() where the return code is further processed. Also find and fix some occurrences where sprintf() was used. Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Message-Id: <20200311090915.21059-1-tiwai@suse.de> Signed-off-by:
-
Alexander Gordeev authored
The CPU topology masks on s390 contain also bits of CPUs which are offline. Currently this is already a problem, since common code scheduler expects e.g. cpu_smt_mask() to reflect reality. This update changes the described behaviour and s390 starts to behave like all other architectures. Signed-off-by:
-
Alexander Gordeev authored
Variable cpus_with_topology is a leftover that became unneeded once the fake NUMA support has been removed. Signed-off-by:
-
Alexander Gordeev authored
Show CPU physical address as reported by STAP instruction Signed-off-by:
-
Alexander Gordeev authored
There is a maximum of two new tables allocated on page table upgrade. Because we know that a loop the current implementation is based on could be unrolled with some improvements: * upgrade from 3 to 5 levels happens in one go - without an unnecessary re-take of page_table_lock in-between; * page tables initialization moved out of the atomic code; Signed-off-by:
-
- 11 Mar, 2020 4 commits
-
-
Christian Borntraeger authored
select does not ensure that dependencies are also selected. Instead of selecting VIRTIO_CONSOLE from S390_GUEST we should rather add this to the defconfigs. So we update those as well. Reported-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
afzal mohammed authored
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanosSigned-off-by:
afzal mohammed <afzal.mohd.ma@gmail.com> Message-Id: <20200304005049.5291-1-afzal.mohd.ma@gmail.com> [heiko.carstens@de.ibm.com: replace pr_err with panic] Signed-off-by:
-
- 10 Mar, 2020 5 commits
-
-
Alexander Gordeev authored
This update adjusts /proc/cpuinfo format to meet some user level programs expectations. It also makes the layout consistent with x86 where CPU topology is presented as blocks of key-value pairs. Reviewed-by:
-
Sven Schnelle authored
When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
-
Heiko Carstens authored
This is the s390 variant of commit 81c22041 ("bpf, x86, arm64: Enable jit by default when not built as always-on"). Acked-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
Add CPU measurement counter facility event description for IBM z15. Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by:
-
Pierre Morel authored
Embedding the hotplug_slot in zdev structure allows to greatly simplify the hotplug handling by eliminating the handling of the slot_list. Signed-off-by:
Pierre Morel <pmorel@linux.ibm.com> Reviewed-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
-
- 06 Mar, 2020 2 commits
-
-
Julian Wiedmann authored
While we print out various SSQD fields at initialization time, having raw & full access to the current SSQD can help with debugging. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Alexander Gordeev authored
Make page, frame, virtual and physical address conversion macros more expressive by avoiding redundant definitions and defining new macros using existing ones. Signed-off-by:
-
- 04 Mar, 2020 3 commits
-
-
Peter Oberparleiter authored
Update maintainer entry for s390 PCI subsystem. Sebastian has left IBM, Niklas takes over maintainership. Signed-off-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by:
-
Peter Oberparleiter authored
Update maintainer entry for s390 Common I/O Layer. Sebastian has left IBM, Vineeth takes over maintainership. Signed-off-by:
Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
This fixes several sparse warnings for fault.c: arch/s390/mm/fault.c:336:36: warning: restricted vm_fault_t degrades to integer arch/s390/mm/fault.c:573:23: warning: incorrect type in assignment (different base types) arch/s390/mm/fault.c:573:23: expected restricted vm_fault_t [usertype] fault arch/s390/mm/fault.c:573:23: got int Signed-off-by:
-
- 27 Feb, 2020 5 commits
-
-
Heiko Carstens authored
It turned out that fake numa support is rather useless on s390, since there are no scenarios where there is any performance or other benefit when used. However it does provide maintenance cost and breaks from time to time. Therefore remove it. CONFIG_NUMA is still supported with a very small backend and only one node. This way userspace applications which require NUMA interfaces continue to work. Note that NODES_SHIFT is set to 1 (= 2 nodes) instead of 0 (= 1 node), since there is quite a bit of kernel code which assumes that more than one node is possible if CONFIG_NUMA is enabled. Signed-off-by:
-
Torsten Duwe authored
aes_s390.c has several functions which allocate space for key material on the stack and leave the used keys there. It is considered good practice to clean these locations before the function returns. Link: https://lkml.kernel.org/r/20200221165511.GB6928@lst.deSigned-off-by:
Torsten Duwe <duwe@suse.de> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Link: https://lkml.kernel.org/r/20200221150612.GA9717@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Julian Wiedmann authored
There's no need for error handling, the debugfs core is smart enough to deal with IS_ERR() internally. This will also keep us from creating the debugfs files if the device directory doesn't exist. Currently (because irq_ptr->debugfs_dev gets set to NULL on error) the files would be placed into the debugfs root - without any association to their parent device. On teardown, use the debugfs_remove_recursive() helper to avoid keeping track of each created file/directory. Signed-off-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Don't rely on the numeric value of enum constants. Signed-off-by:
-
- 19 Feb, 2020 3 commits
-
-
Stefan Raspl authored
In case $INSTALLKERNEL is not available, we should install the kernel image with its version number, and save the previous one accordingly. Also, we're adding a hint so users know that they still need to perform one more configuration step (usually adjusting zipl config). Signed-off-by:
Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Remove all usage of cdev->private->qdio_data that's buried deep in internal code. This should only be used by the exported driver API, which can then pass around a proper qdio_irq pointer. Also trivially merge some initializations with their definitions. Signed-off-by:
-
Julian Wiedmann authored
Some parts use init_data->cdev, others use irq_ptr->cdev. In the end it's all the same, but unnecessarily confusing. Use a single reference instead. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
-
- 17 Feb, 2020 2 commits
-
-
Harald Freudenberger authored
There will come a new CCA keyblock version 2 for protected keys delivered back to the OS. The difference is only the amount of available buffer space to be up to 256 bytes for version 2. Signed-off-by:
-
Thomas Richter authored
Adjust sampling buffer allocation depending on frequency and correct comments. Investigation on the interrupt handler revealed that almost always one interupt services one SDB, even when running with the maximum frequency of 100000. Very rarely there have been 2 SBD serviced per interrupt. Therefore reduce the number of SBD per CPU. Each SDB is one page in size. The new formula results in freq:4000 n_sdb:32 new:16 freq:10000 n_sdb:80 new:16 freq:20000 n_sdb:159 new:17 freq:40000 n_sdb:318 new:19 freq:50000 n_sdb:397 new:20 freq:62500 n_sdb:497 new:22 freq:83333 n_sdb:662 new:24 freq:100000 n_sdb:794 new:25 Signed-off-by:
-
- 16 Feb, 2020 5 commits
-
-
Linus Torvalds authored
-
https://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI update from Corey Minyard: "Minor bug fixes for IPMI I know this is late; I've been travelling and, well, I've been distracted. This is just a few bug fixes and adding i2c support to the IPMB driver, which is something I wanted from the beginning for it" * tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi: drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write ipmi:ssif: Handle a possible NULL pointer reference drivers: ipmi: Modify max length of IPMB packet drivers: ipmi: Support raw i2c packet in IPMB
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bugfixes and improvements to selftests. On top of this, Mauro converted the KVM documentation to rst format, which was very welcome" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits) docs: virt: guest-halt-polling.txt convert to ReST docs: kvm: review-checklist.txt: rename to ReST docs: kvm: Convert timekeeping.txt to ReST format docs: kvm: Convert s390-diag.txt to ReST format docs: kvm: Convert ppc-pv.txt to ReST format docs: kvm: Convert nested-vmx.txt to ReST format docs: kvm: Convert mmu.txt to ReST format docs: kvm: Convert locking.txt to ReST format docs: kvm: Convert hypercalls.txt to ReST format docs: kvm: arm/psci.txt: convert to ReST docs: kvm: convert arm/hyp-abi.txt to ReST docs: kvm: Convert api.txt to ReST format docs: kvm: convert devices/xive.txt to ReST docs: kvm: convert devices/xics.txt to ReST docs: kvm: convert devices/vm.txt to ReST docs: kvm: convert devices/vfio.txt to ReST docs: kvm: convert devices/vcpu.txt to ReST docs: kvm: convert devices/s390_flic.txt to ReST docs: kvm: convert devices/mpic.txt to ReST docs: kvm: convert devices/arm-vgit.txt to ReST ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: "Two fixes for use-after-free and memory leaking in the EDAC core, by Robert Richter. Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK unearthed issues with the lifespan of memory allocated by the EDAC memory controller descriptor due to misdesigned memory freeing, done partially by the EDAC core *and* the driver core, which is problematic to say the least. These two are minimal fixes to take care of stable - a proper rework is following which cleans up that mess properly" * tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/sysfs: Remove csrow objects on errors EDAC/mc: Fix use-after-free and memleaks during device removal
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Not a lot here, which is great, basically just three small bcache fixes from Coly, and four NVMe fixes via Keith" * tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block: nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info nvme/pci: move cqe check after device shutdown nvme: prevent warning triggered by nvme_stop_keep_alive nvme/tcp: fix bug on double requeue when send fails bcache: remove macro nr_to_fifo_front() bcache: Revert "bcache: shrink btree node cache after bch_btree_check()" bcache: ignore pending signals when creating gc and allocator thread
-
