- 01 Feb, 2020 40 commits
-
-
Johan Hovold authored
commit 92aafe77 upstream. The driver would fail to stop the command timer in most error paths, something which specifically could lead to the timer being freed while still active on I/O errors during probe. Fix this by making sure that each function starting the timer also stops it in all relevant error paths. Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com Fixes: b78e91bc ("rsi: Add new firmware loading method") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vincent Guittot authored
commit f6783319 upstream. Sargun reported a crash: "I picked up c40f7d74 sched/fair: Fix infinite loop in update_blocked_averages() by reverting a9e7f654 and put it on top of 4.19.13. In addition to this, I uninlined list_add_leaf_cfs_rq for debugging. This revealed a new bug that we didn't get to because we kept getting crashes from the previous issue. When we are running with cgroups that are rapidly changing, with CFS bandwidth control, and in addition using the cpusets cgroup, we see this crash. Specifically, it seems to occur with cgroups that are throttled and we change the allowed cpuset." The algorithm used to order cfs_rq in rq->leaf_cfs_rq_list assumes that it will walk down to root the 1st time a cfs_rq is used and we will finish to add either a cfs_rq without parent or a cfs_rq with a parent that is already on the list. But this is not always true in presence of throttling. Because a cfs_rq can be throttled even if it has never been used but other CPUs of the cgroup have already used all the bandwdith, we are not sure to go down to the root and add all cfs_rq in the list. Ensure that all cfs_rq will be added in the list even if they are throttled. [ mingo: Fix !CGROUPS build. ] Reported-by:
Sargun Dhillon <sargun@sargun.me> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: tj@kernel.org Fixes: 9c2791f9 ("Fix hierarchical order in rq->leaf_cfs_rq_list") Link: https://lkml.kernel.org/r/1548825767-10799-1-git-send-email-vincent.guittot@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Janne Huttunen <janne.huttunen@nokia.com> Signed-off-by:
-
Peter Zijlstra authored
commit 5d299eab upstream. The magic in list_add_leaf_cfs_rq() requires that at the end of enqueue_task_fair(): rq->tmp_alone_branch == &rq->lead_cfs_rq_list If this is violated, list integrity is compromised for list entries and the tmp_alone_branch pointer might dangle. Also, reflow list_add_leaf_cfs_rq() while there. This looses one indentation level and generates a form that's convenient for the next patch. Signed-off-by:
-
Laura Abbott authored
[ Upstream commit bc3bdb12 ] Steve Ellis reported incorrect block sizes and alignement offsets with a SATA enclosure. Adding a quirk to disable UAS fixes the problems. Reported-by:
Steven Ellis <sellis@redhat.com> Cc: Pacho Ramos <pachoramos@gmail.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Dooks authored
[ Upstream commit 2079fe6e ] The omap_sr_pdata is not declared but is exported, so add a define for it to fix the following warning: arch/arm/mach-omap2/pdata-quirks.c:609:36: warning: symbol 'omap_sr_pdata' was not declared. Should it be static? Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit 3c124435 ] Non-Transparent Bridge (NTB) devices (among others) may have many DMA aliases seeing the hardware will send requests with different device ids depending on their origin across the bridged hardware. See commit ad281ecf ("PCI: Add DMA alias quirk for Microsemi Switchtec NTB") for more information on this. The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for IRQs so if devices send an interrupt from one of their aliases they will be blocked on AMD hardware with the IOMMU enabled. To fix this, ensure IRQ remapping is enabled for all aliases with MSI interrupts. This is analogous to the functionality added to the Intel IRQ remapping code in commit 3f0c625c ("iommu/vt-d: Allow interrupts from the entire bus for aliased devices") Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Slawomir Pawlowski authored
[ Upstream commit 56b4cd4b ] Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices exposing computational units via Non Transparent Bridges (NTB, PEX 87xx). Similarly to MIC x200, we need to add DMA aliases to allow buffer access when IOMMU is enabled. Add aliases to allow computational unit access to host memory. These aliases mark the whole VCA device as one IOMMU group. All possible slot numbers (0x20) are used, since we are unable to tell what slot is used on other side. This quirk is intended for both host and computational unit sides. The VCA devices have up to five functions: four for DMA channels and one additional. Link: https://lore.kernel.org/r/5683A335CC8BE1438C3C30C49DCC38DF637CED8E@IRSMSX102.ger.corp.intel.comSigned-off-by:
Slawomir Pawlowski <slawomir.pawlowski@intel.com> Signed-off-by:
Przemek Kitszel <przemyslawx.kitszel@intel.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Pacien TRAN-GIRARD authored
[ Upstream commit 10b65e29 ] This patch adds a quirk disabling keyboard backlight support for the Dell Inspiron 1012 and 1018. Those models wrongly report supporting keyboard backlight control features (through SMBIOS tokens) even though they're not equipped with a backlit keyboard. This led to broken controls being exposed through sysfs by this driver which froze the system when used. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107651Signed-off-by:
Pacien TRAN-GIRARD <pacien.trangirard@pacien.net> Reviewed-by:
Mario Limonciello <mario.limonciello@dell.com> Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Rodrigo Rivas Costa authored
[ Upstream commit 20eee6e5 ] The `connected` value for wired devices was not properly initialized, it must be set to `true` upon creation, because wired devices do not generate connection events. When a raw client (the Steam Client) uses the device, the input device is destroyed. Then, when the raw client finishes, it must be recreated. But since the `connected` variable was false this never happended. Signed-off-by:
Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 30780d08 ] With -O3, gcc has found an actual unintialized variable stored into an mmio register in two instances: drivers/atm/eni.c: In function 'discard': drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized] writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4); ^ drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized] Change the code to always write zeroes instead. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit c5706c7d ] Driver fails to compile in a minimized kernel's configuration because of the missing dependency on GPIOLIB_IRQCHIP. error: ‘struct gpio_chip’ has no member named ‘irq’ 44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset); Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106015154.12040-1-digetx@gmail.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 00c0688c ] Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture): drivers/net/wan/sdla.c: In function ‘sdla_transmit’: drivers/net/wan/sdla.c:711:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Fenghua Yu authored
[ Upstream commit f11421ba ] Atomic operations that span cache lines are super-expensive on x86 (not just to the current processor, but also to other processes as all memory operations are blocked until the operation completes). Upcoming x86 processors have a switch to cause such operations to generate a #AC trap. It is expected that some real time systems will enable this mode in BIOS. In preparation for this, it is necessary to fix code that may execute atomic instructions with operands that cross cachelines because the #AC trap will crash the kernel. Since "pwol_mask" is local and never exposed to concurrency, there is no need to set bits in pwol_mask using atomic operations. Directly operate on the byte which contains the bit instead of using __set_bit() to avoid any big endian concern due to type cast to unsigned long in __set_bit(). Suggested-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
wuxu.wu authored
[ Upstream commit 19b61392 ] dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by:
wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Andreas Kemnade authored
[ Upstream commit a76dfb85 ] Platform device aliases were missing so module autoloading did not work. Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.infoSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
David Engraf authored
[ Upstream commit da9e3f4e ] max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by:
David Engraf <david.engraf@sysgo.com> Reviewed-by:
-
Tony Lindgren authored
[ Upstream commit 63078b6b ] The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Bjorn Andersson authored
[ Upstream commit cd217ee6 ] It's typical for the QHP PHY to take slightly above 1ms to initialize, so increase the timeout of the PHY ready check to 10ms - as already done in the downstream PCIe driver. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by:
Evan Green <evgreen@chromium.org> Tested-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Pan Zhang authored
[ Upstream commit 306d5acb ] 1002 if ((quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) { 1003 struct input_mt_slot *i_slot = &mt->slots[slotnum]; 1004 1005 if (input_mt_is_active(i_slot) && 1006 input_mt_is_used(mt, i_slot)) 1007 return -EAGAIN; 1008 } We previously assumed 'mt' could be null (see line 1002). The following situation is similar, so add a judgement. Signed-off-by:
Pan Zhang <zhangpan26@huawei.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Pavel Balan authored
[ Upstream commit fd091376 ] Apply it to the Lenovo Y720 gaming laptop I2C peripheral then. This fixes dmesg being flooded with errors visible on un-suspend in Linux Mint 19 Cinnamon. Example of error log: <...> [ 4.326588] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.326845] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327095] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327341] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) [ 4.327609] i2c_hid i2c-ITE33D1:00: i2c_hid_get_input: incomplete report (2/4) <...> Example of fixed log (debug on) <...> [ 3731.333183] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.333581] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.333842] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.334107] i2c_hid i2c-ITE33D1:00: input: 02 00 [ 3731.334367] i2c_hid i2c-ITE33D1:00: input: 02 00 <...> [jkosina@suse.cz: rebase onto more recent codebase] Signed-off-by:
Pavel Balan <admin@kryma.net> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 8f18eca9 ] The Acer SW5-012 2-in-1 keyboard dock uses a Synaptics S91028 touchpad which is connected to an ITE 8595 USB keyboard controller chip. This keyboard has the same quirk for its rfkill / airplane mode hotkey as other keyboards with the ITE 8595 chip, it only sends a single release event when pressed and released, it never sends a press event. This commit adds this keyboards USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Priit Laes authored
[ Upstream commit c62f7cd8 ] Without the quirk, joystick shows up as single controller for both first and second player pads/pins. Signed-off-by:
Priit Laes <plaes@plaes.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 1928b36c ] Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig: WARNING: unmet direct dependencies detected for CLKSRC_NPS Depends on [n]: GENERIC_CLOCKEVENTS [=y] && !PHYS_ADDR_T_64BIT [=y] Selected by [y]: - ARC_PLAT_EZNPS [=y] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ofer Levi <oferle@mellanox.com> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Aaron Ma authored
[ Upstream commit 348b80b2 ] Add multitouch support for LG MELF I2C touchscreen. Apply the same workaround as LG USB touchscreen. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 2e24cd75 ] The current implementations of ops->bind_class() are merely searching for classid and updating class in the struct tcf_result, without invoking either of cl_ops->bind_tcf() or cl_ops->unbind_tcf(). This breaks the design of them as qdisc's like cbq use them to count filters too. This is why syzbot triggered the warning in cbq_destroy_class(). In order to fix this, we have to call cl_ops->bind_tcf() and cl_ops->unbind_tcf() like the filter binding path. This patch does so by refactoring out two helper functions __tcf_bind_filter() and __tcf_unbind_filter(), which are lockless and accept a Qdisc pointer, then teaching each implementation to call them correctly. Note, we merely pass the Qdisc pointer as an opaque pointer to each filter, they only need to pass it down to the helper functions without understanding it at all. Fixes: 07d79fc7 ("net_sched: add reverse binding for tc class") Reported-and-tested-by: syzbot+0a0596220218fcb603a8@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+63bdb6006961d8c917c6@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 55cd9f67 ] It is possible for malicious userspace to set TCF_EM_SIMPLE bit even for matches that should not have this bit set. This can fool two places using tcf_em_is_simple() 1) tcf_em_tree_destroy() -> memory leak of em->data if ops->destroy() is NULL 2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes of a kernel pointer. BUG: memory leak unreferenced object 0xffff888121850a40 (size 32): comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s) hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline] [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline] [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671 [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127 [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline] [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32 [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline] [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline] [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300 [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline] [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219 [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104 [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415 [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline] [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline] [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Johan Hovold authored
commit 2d68bb26 upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: a1030e92 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by:
-
Johan Hovold authored
commit 39a4281c upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26f1fad2 ("New driver: rtl8xxxu (mac80211)") Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Johan Hovold authored
commit 3428fbcd upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 71bb244b ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable <stable@vger.kernel.org> # 3.4 Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Johan Hovold authored
commit 0ef33295 upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 36bcce43 ("ath9k_htc: Handle storage devices") Cc: stable <stable@vger.kernel.org> # 2.6.39 Signed-off-by:
-
Paulo Alcantara (SUSE) authored
commit 0a5a9886 upstream. __smb2_handle_cancelled_cmd() is called under a spin lock held in cifs_mid_q_entry_release(), so make its memory allocation GFP_ATOMIC. This issue was observed when running xfstests generic/028: [ 1722.589204] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72064 cmd: 5 [ 1722.590687] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72065 cmd: 17 [ 1722.593529] CIFS VFS: \\192.168.30.26 Cancelling wait for mid 72066 cmd: 6 [ 1723.039014] BUG: sleeping function called from invalid context at mm/slab.h:565 [ 1723.040710] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 30877, name: cifsd [ 1723.045098] CPU: 3 PID: 30877 Comm: cifsd Not tainted 5.5.0-rc4+ #313 [ 1723.046256] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 [ 1723.048221] Call Trace: [ 1723.048689] dump_stack+0x97/0xe0 [ 1723.049268] ___might_sleep.cold+0xd1/0xe1 [ 1723.050069] kmem_cache_alloc_trace+0x204/0x2b0 [ 1723.051051] __smb2_handle_cancelled_cmd+0x40/0x140 [cifs] [ 1723.052137] smb2_handle_cancelled_mid+0xf6/0x120 [cifs] [ 1723.053247] cifs_mid_q_entry_release+0x44d/0x630 [cifs] [ 1723.054351] ? cifs_reconnect+0x26a/0x1620 [cifs] [ 1723.055325] cifs_demultiplex_thread+0xad4/0x14a0 [cifs] [ 1723.056458] ? cifs_handle_standard+0x2c0/0x2c0 [cifs] [ 1723.057365] ? kvm_sched_clock_read+0x14/0x30 [ 1723.058197] ? sched_clock+0x5/0x10 [ 1723.058838] ? sched_clock_cpu+0x18/0x110 [ 1723.059629] ? lockdep_hardirqs_on+0x17d/0x250 [ 1723.060456] kthread+0x1ab/0x200 [ 1723.061149] ? cifs_handle_standard+0x2c0/0x2c0 [cifs] [ 1723.062078] ? kthread_create_on_node+0xd0/0xd0 [ 1723.062897] ret_from_fork+0x3a/0x50 Signed-off-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> Fixes: 9150c3ad ("CIFS: Close open handle after interrupted close") Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Eric Biggers authored
commit bd56cea0 upstream. The chelsio crypto driver is casting 'struct crypto_aead' directly to 'struct crypto_tfm', which is incorrect because the crypto_tfm isn't the first field of 'struct crypto_aead'. Consequently, the calls to crypto_tfm_set_flags() are modifying some other field in the struct. Also, the driver is setting CRYPTO_TFM_RES_BAD_KEY_LEN in ->setauthsize(), not just in ->setkey(). This is incorrect since this flag is for bad key lengths, not for bad authentication tag lengths. Fix these bugs by removing the broken crypto_tfm_set_flags() calls from ->setauthsize() and by fixing them in ->setkey(). Fixes: 324429d7 ("chcr: Support for Chelsio's Crypto Hardware") Cc: <stable@vger.kernel.org> # v4.9+ Cc: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Andy Shevchenko authored
commit e825070f upstream. The commit 41c128cb ("iio: st_gyro: Add lsm9ds0-gyro support") assumes that gyro in LSM9DS0 is the same as others with 0xd4 WAI ID, but datasheet tells slight different story, i.e. the first scale factor for the chip is 245 dps, and not 250 dps. Correct this by introducing a separate settings for LSM9DS0. Fixes: 41c128cb ("iio: st_gyro: Add lsm9ds0-gyro support") Depends-on: 45a4e422 ("iio: gyro: st_gyro: fix L3GD20H support") Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Tomas Winkler authored
commit 559e575a upstream. Add Comet Point device IDs for Comet Lake H platforms. Cc: <stable@vger.kernel.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200119094229.20116-1-tomas.winkler@intel.comSigned-off-by:
-
Lubomir Rintel authored
commit ef9ffc1e upstream. The match data does not have to be a struct device pointer, and indeed very often is not. Attempt to treat it as such easily results in a crash. For the components that are not registered, we don't know which device is missing. Once it it is there, we can use the struct component to get the device and whether it's bound or not. Fixes: 59e73854 ('component: add debugfs support') Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: stable <stable@vger.kernel.org> Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20191118115431.63626-1-lkundrak@v3.skSigned-off-by:
-
Lukas Wunner authored
commit dc76697d upstream. Unbinding the bcm2835aux UART driver raises the following error if the maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS): (NULL device *): Removing wrong port: a6f80333 != fa20408b That's because bcm2835aux_serial_probe() retrieves UART line number 1 from the devicetree and stores it in data->uart.port.line, while serial8250_register_8250_port() instead uses UART line number 0, which is stored in data->line. On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line, which contains the wrong number. Fix it. The issue does not occur if the maximum number of 8250 UARTs is >= 2. Fixes: bdc5f300 ("serial: bcm2835: add driver for bcm2835-aux-uart") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.6+ Cc: Martin Sperl <kernel@martin.sperl.org> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by:
-
Malcolm Priestley authored
commit 9dd631fa upstream. The driver reporting IEEE80211_TX_STAT_ACK is not being handled correctly. The driver should only report on TSR_TMO flag is not set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK is being requested. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/340f1f7f-c310-dca5-476f-abc059b9cd97@gmail.comSigned-off-by:
-
Malcolm Priestley authored
commit d579c43c upstream. It appears that the drivers does not go into power save correctly the NULL data packets are not being transmitted because it not enabled in mac80211. The driver needs to capture ieee80211_is_nullfunc headers and copy the duration_id to it's own duration data header. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit d971fdd3 upstream. It appears that the driver still transmits in CTS protect mode even though it is not enabled in mac80211. That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect. The only difference between them GA does not use B rates. Find if only B rate in GB or GA in protect mode otherwise transmit packets as PK_TYPE_11A. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Colin Ian King authored
commit 4cc41cbc upstream. Currently when the call to prism2sta_ifst fails a netdev_err error is reported, error return variable result is set to -1 but the function always returns 0 for success. Fix this by returning the error value in variable result rather than 0. Addresses-Coverity: ("Unused value") Fixes: 00b3ed16 ("Staging: add wlan-ng prism2 usb driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.comSigned-off-by:
-
