Otherwise we won't be able to cleanly handle page faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make sure that not only the entities are flush, but that
we also wait for the HW to finish all processing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's a bug having a dead pointer in the IDR, silently returning
is the worst we can do.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove the chash implementation for now since it isn't used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Further testing showed that the idea with the chash doesn't work as expected.
Especially we can't predict when we can remove the entries from the hash again.

So replace the chash with a ring buffer/hash mix where entries in the container
age automatically based on their timestamp.

v2: use ring buffer / hash mix
v3: check the timeout to make sure all entries age
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only process a maximum of 32 IVs before writing back the RPTR. This improves
hw handling when we get close to an overflow in the ring buffer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

That doesn't seem to have any negative effects.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The doorbells should already be reserved, just enable them.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable overflow and enable full drain. This makes fault handling on ring 1
much more reliable since we don't generate back pressure any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The buffers should be cleared when possible but we also don't want
buffer creation to fail in the rare case where the ring isn't ready
during the call. This could happen during some suspend/resume sequences.

Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The dumb_create API isn't intended for high performance rendering
and it's more useful for userspace (ie. IGT) to have them precleared.

The bonus here is that we also won't needlessly leak whatever was
previously in VRAM, but it also probably wasn't sensitive if it was
going through this API.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:405:2-3: Unneeded semicolon
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:435:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add ras post init function.
Do some initialization after all IP have finished their late init.

Add new member flags which will control the ras work flow.
For now, vbios enable ras for us on boot. That might change in the
future.
So there should be a flag from vbios to tell us if ras is enabled or not
on boot. Looks like there is no such info now.

Other bits of the flags are reserved to control other parts of ras.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add drm info output if ras initialized successfully.
add ras atomfirmware sanity check.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

lockdep need a static key.
Previously we set ignore bit to avoid the warning.
Now call sysfs_attr_init to initialize the static key.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-and-Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Unzero char is accepted by sscanf, so when data is structure but
unexpectedly return error invalid;
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, it is not clear how ras is supported. Both software and
hardware can set the supported. That is confusing.

Fix it by adding new member hw_supported.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set ignore bit to satisfy locpdep.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Ta is optional, so check if ta firmware is loaded or not.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The descriptions of modinfo wrongly show two parameters
for each feature(see below). This patch can fix this
incorrect outputs.

parm:           amdgpu_ras_enable:Enable RAS features on the GPU (0 = disable, 1 = enable, -1 = auto (default))
parm:           ras_enable:int
parm:           amdgpu_ras_mask:Mask of RAS features to enable (default 0xffffffff), only valid when ras_enable == 1
parm:           ras_mask:uint
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

query sram ecc capability via amdgpu_atomfirmware_ecc_default_enabled
query ecc availability via amdgpu_atomfirmware_sram_ecc_supported
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

sram ecc capability could be get from firmware_capability field in firmwareinfo table
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ecc default status (enabled or disabled) could be get from umc_config field in umc_info table
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add new umc_info structures and new firmware_capability defines
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Suspend will put irq, so resume need get irq back.
And in the same time, skip other ras initialization.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RAS ECC event will combine with GPU reset event, due to
ECC interrupts are caused by uncorrectable error that triggers
GPU reset.

v2: Fix misleading-indentation warning
v3: fix build with CONFIG_HSA_AMD disabled
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It is to collaborate with HSA_CAPABILITY in libhsakmt.

v2: squash in NULL pointer check
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, the debugfs control node can't parse bash-like commands.
Now add such support for any tester that uses scripts.

v2: squash in fixes for input validation
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu reset is not stable on vega20 A1.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a query for userspace to check which RAS features
are enabled.

v2: squash in warning fix
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add AMDGPU_CTX_QUERY2_FLAGS_RAS_CE/UE which indicate if any error happened
between previous query and this query.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Register ecc interrupts and ecc interrupt handler on gfx9.
Add ras support on gfx9

v2: squash in warning fix
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

register IH, enable ras features on sdma.
create sysfs debugfs file for sdma.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Mark vram pages with errors as bad and prevent the driver
from using them.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

allow userspace enable/disable ras
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add obj management.
add feature control.
add debugfs infrastructure.
add sysfs infrastructure.
add IH infrastructure.
add recovery infrastructure.

It is a framework. Other IPs need call amdgpu_ras_xxx function instead of
psp_ras_xxx functions.

v2: squash in warning fixes
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>