The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings.  Ensure they actually are
nul-terminated before using them.

Fixes: a07b4970 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

If the config option NVME_HOST_AUTH is not selected we should not
accept the corresponding fabrics options. This allows userspace
to detect if NVMe authentication has been enabled for the kernel.

Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f50fff73 ("nvme: implement In-Band authentication")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

We only need to evaluate the 'tls' connect option if TLS is
enabled; otherwise we might be getting a link error.

Fixes: 706add13 ("nvme: keyring: fix conditional compilation")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202311140426.0eHrTXBr-lkp@intel.com/Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Pull NVMe fixes from Keith:

"nvme fixes for 6.7

 - nvme keyring config compile fixes (Hannes and Arnd)
 - fabrics keep alive fixes (Hannes)
 - tcp authentication fixes (Mark)
 - io_uring_cmd error handling fix (Anuj)
 - stale firmware attribute fix (Daniel)
 - tcp memory leak (Christophe)
 - cytpo library usage simplification (Eric)"

* tag 'nvme-6.7-2023-11-8' of git://git.infradead.org/nvme:
  nvme: keyring: fix conditional compilation
  nvme: common: make keyring and auth separate modules
  nvme: start keep-alive after admin queue setup
  nvme-loop: always quiesce and cancel commands before destroying admin q
  nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
  nvme-auth: always set valid seq_num in dhchap reply
  nvme-auth: add flag for bi-directional auth
  nvme-auth: auth success1 msg always includes resp
  nvme: fix error-handling for io_uring nvme-passthrough
  nvme: update firmware version after commit
  nvme-tcp: Fix a memory leak
  nvme-auth: use crypto_shash_tfm_digest()

The keyring and auth functions can be called from both the host and
the target side and are controlled by Kconfig options for each of the
combinations, but the declarations are controlled by #ifdef checks
on the shared Kconfig symbols.

This leads to link failures in combinations where one of the frontends
is built-in and the other one is a module, and the keyring code
ends up in a module that is not reachable from the builtin code:

ld: drivers/nvme/host/core.o: in function `nvme_core_exit':
core.c:(.exit.text+0x4): undefined reference to `nvme_keyring_exit'
ld: drivers/nvme/host/core.o: in function `nvme_core_init':
core.c:(.init.text+0x94): undefined reference to `nvme_keyring_init

ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl':
tcp.c:(.text+0x4c18): undefined reference to `nvme_tls_psk_default'

Address this by moving nvme_keyring_init()/nvme_keyring_exit() into
module init/exit functions for the keyring module.

Fixes: be8e82ca ("nvme-tcp: enable TLS handshake upcall")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

When only the keyring module is included but auth is not, modpost
complains about the lack of a module license tag:

ERROR: modpost: missing MODULE_LICENSE() in drivers/nvme/common/nvme-common.o

Address this by making both modules buildable standalone,
removing the now unnecessary CONFIG_NVME_COMMON symbol
in the process.

Also, now that NVME_KEYRING config symbol can be either a module or
built-in, the stubs need to check for '#if IS_ENABLED' rather than a
simple '#ifdef'.

Fixes: 9d77eb52 ("nvme-keyring: register '.nvme' keyring")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

If one of the underlying disks of raid or dm is set to read-only, then
each io will generate new log, which will cause message storm. This
environment is indeed problematic, however we can't make sure our
naive custormer won't do this, hence use pr_warn_ratelimited() to
prevent message storm in this case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 57e95e46 ("block: fix and cleanup bio_check_ro")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20231107111247.2157820-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit 4af5f2e0 ("nbd: use blk_mq_alloc_disk and
blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set
disk->private_data as NULL as before. UAF may be triggered in nbd_open()
if someone tries to open nbd device right after nbd_put() since nbd has
been free in nbd_dev_remove().

Fix this by implementing ->free_disk and free private data in it.

Fixes: 4af5f2e0 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231107103435.2074904-1-lilingfeng@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Setting up I/O queues might take quite some time on larger and/or
busy setups, so KATO might expire before all I/O queues could be
set up.
Fix this by start keep alive from the ->init_ctrl_finish() callback,
and stopping it when calling nvme_cancel_admin_tagset().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
[fixed nvme-fc compile error]
Signed-off-by: Keith Busch <kbusch@kernel.org>

Once ->init_ctrl_finish() is called there may be commands outstanding,
so we should quiesce the admin queue and cancel all commands prior
to call nvme_loop_destroy_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>

nvme_tcp_setup_ctrl() has an open-coded version of
nvme_tcp_teardown_admin_queue().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Currently a seqnum of zero is sent during uni-directional
authentication. The zero value is reserved for the secure channel
feature which is not yet implemented.

Relevant extract from the spec:
The value 0h is used to indicate that bidirectional authentication
is not performed, but a challenge value C2 is carried in order to
generate a pre-shared key (PSK) for subsequent establishment of a
secure channel
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Introduces an explicit variable for bi-directional auth.
The currently used variable chap->s2 is incorrectly zeroed for
uni-directional auth. That will be fixed in the next patch so this
needs to change to avoid sending unexpected success2 messages
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>

In cases where RVALID is false, the response is still transmitted,
but is cleared to zero.

Relevant extract from the spec:
Response R2, if valid (i.e., if the RVALID field is set to 01h),
cleared to 0h otherwise
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Driver may return an error before submitting the command to the device.
Ensure that such error is propagated up.

Fixes: 456cba38 ("nvme: wire-up uring-cmd support for io-passthru on char-device.")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

The firmware version sysfs entry needs to be updated after a successfully
firmware activation.

nvme-cli stopped issuing an Identify Controller command to list the
current firmware information and relies on sysfs showing the current
firmware version.
Reported-by: Kenji Tomonaga <tkenbo@gmail.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Kenji Tomonaga <tkenbo@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
[fixed off-by one afi index]
Signed-off-by: Keith Busch <kbusch@kernel.org>

All error handling path end to the error handling path, except this one.
Go to the error handling branch as well here, otherwise 'icreq' and
'icresp' will leak.

Fixes: 2837966a ("nvme-tcp: control message handling for recvmsg()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Simplify nvme_auth_augmented_challenge() by using
crypto_shash_tfm_digest() instead of an alloc+init+update+final
sequence.  This should also improve performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>

Pull RTC updates from Alexandre Belloni:
 "There is a new driver for the RTC of the Mstar SSD202D SoC. The
  rtc7301 driver gains support for byte addresses to support the
  USRobotics USR8200. Then we have many non user visible changes and
  typo fixes.

  Summary:

  Subsytem:
   - convert platform drivers to remove_new
   - prevent modpost warnings for unremovable platform drivers

  New driver:
   - Mstar SSD202D

  Drivers:
   - brcmstb-waketimer: support level alarm_irq
   - ep93xx: add DT support
   - rtc7301: support byte-addressed IO"

* tag 'rtc-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
  dt-bindings: rtc: Add Mstar SSD202D RTC
  rtc: Add support for the SSD202D RTC
  rtc: at91rm9200: annotate at91_rtc_remove with __exit again
  dt-bindings: rtc: microcrystal,rv3032: Document wakeup-source property
  dt-bindings: rtc: pcf8523: Convert to YAML
  dt-bindings: rtc: mcp795: move to trivial-rtc
  rtc: ep93xx: add DT support for Cirrus EP93xx
  dt-bindings: rtc: Add Cirrus EP93xx
  dt-bindings: rtc: pcf2123: convert to YAML
  rtc: efi: fixed typo in efi_procfs()
  rtc: omap: Use device_get_match_data()
  rtc: pcf85363: fix wrong mask/val parameters in regmap_update_bits call
  rtc: rtc7301: Support byte-addressed IO
  rtc: rtc7301: Rewrite bindings in schema
  rtc: sh: Convert to platform remove callback returning void
  rtc: pxa: Convert to platform remove callback returning void
  rtc: mv: Convert to platform remove callback returning void
  rtc: imxdi: Convert to platform remove callback returning void
  rtc: at91rm9200: Convert to platform remove callback returning void
  rtc: pcap: Drop no-op remove function
  ...

Pull mailbox updates from Jassi Brar:

 - imx: add support for TX Doorbell v2

 - mtk: implement runtime PM

 - zynqmp: add destination mailbox compatible

 - qcom:
    - add another clock provider for IPQ
    - add SM8650 compatible

 - misc: use preferred device_get_match_data()

* tag 'mailbox-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
  dt-bindings: mailbox: qcom-ipcc: document the SM8650 Inter-Processor Communication Controller
  mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend
  mailbox: Use device_get_match_data()
  dt-bindings: zynqmp: add destination mailbox compatible
  dt-bindings: mailbox: qcom: add one more clock provider for IPQ mailbox
  mailbox: imx: support channel type tx doorbell v2
  dt-bindings: mailbox: fsl,mu: add new tx doorbell channel

Pull virtio updates from Michael Tsirkin:
 "vhost,virtio,vdpa: features, fixes, cleanups.

  vdpa/mlx5:
   - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
   - new maintainer

  vdpa:
   - support for vq descriptor mappings
   - decouple reset of iotlb mapping from device reset

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vdpa_sim: implement .reset_map support
  vdpa/mlx5: implement .reset_map driver op
  vhost-vdpa: clean iotlb map during reset for older userspace
  vdpa: introduce .compat_reset operation callback
  vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
  vhost-vdpa: reset vendor specific mapping to initial state in .release
  vdpa: introduce .reset_map operation callback
  virtio_pci: add check for common cfg size
  virtio-blk: fix implicit overflow on virtio_max_dma_size
  virtio_pci: add build offset check for the new common cfg items
  virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
  vduse: make vduse_class constant
  vhost-scsi: Spelling s/preceeding/preceding/g
  virtio: kdoc for struct virtio_pci_modern_device
  vdpa: Update sysfs ABI documentation
  MAINTAINERS: Add myself as mlx5_vdpa driver
  virtio-balloon: correct the comment of virtballoon_migratepage()
  mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
  vdpa/mlx5: Update cvq iotlb mapping on ASID change
  vdpa/mlx5: Make iotlb helper functions more generic
  ...

Merge tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire update from Takashi Sakamoto:
 "A slight change for flexible length of array in core function.

  Kees Cook provides a patch to annotate the array embedded in fw_node
  structure referring to structure member for the length of array. The
  annotation would be defined by future extension of C compilers, and
  used for access bound-check at run-time enabled by UBSAN and
  FORTIFY_SOURCE"

* tag 'firewire-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: Annotate struct fw_node with __counted_by

Pull i2c updates from Wolfram Sang:
 "I2C has largely driver updates for 6.7, i.e. feature additions (like
  adding transfers while in atomic mode), using new helpers (like
  devm_clk_get_enabled), new IDs, documentation fixes and additions...
  you name it.

  The core got a memleak fix and better support for nested muxes"

* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
  i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
  i2c: qcom-geni: add ACPI device id for sc8180x
  Documentation: i2c: add fault code for not supporting 10 bit addresses
  i2c: sun6i-p2wi: Prevent potential division by zero
  i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
  i2c: i801: Use new helper acpi_use_parent_companion
  ACPI: Add helper acpi_use_parent_companion
  MAINTAINERS: add YAML file for i2c-demux-pinctrl
  i2c: core: fix lockdep warning for sparsely nested adapter chain
  i2c: axxia: eliminate kernel-doc warnings
  dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
  i2c: stm32f7: Use devm_clk_get_enabled()
  i2c: stm32f4: Use devm_clk_get_enabled()
  i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
  i2c: fix memleak in i2c_new_client_device()
  i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
  i2c: i801: Simplify class-based client device instantiation
  i2c: exynos5: add support for atomic transfers
  i2c: at91-core: Use devm_clk_get_enabled()
  eeprom: at24: add ST M24C64-D Additional Write lockable page support
  ...

Pull UBI and UBIFS updates from Richard Weinberger:

 - UBI Fastmap improvements

 - Minor issues found by static analysis bots in both UBI and UBIFS

 - Fix for wrong dentry length UBIFS in fscrypt mode

* tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: ubifs_link: Fix wrong name len calculating when UBIFS is encrypted
  ubi: block: Fix use-after-free in ubiblock_cleanup
  ubifs: fix possible dereference after free
  ubi: fastmap: Add control in 'UBI_IOCATT' ioctl to reserve PEBs for filling pools
  ubi: fastmap: Add module parameter to control reserving filling pool PEBs
  ubi: fastmap: Fix lapsed wear leveling for first 64 PEBs
  ubi: fastmap: Get wl PEB even ec beyonds the 'max' if free PEBs are run out
  ubi: fastmap: may_reserve_for_fm: Don't reserve PEB if fm_anchor exists
  ubi: fastmap: Remove unneeded break condition while filling pools
  ubi: fastmap: Wait until there are enough free PEBs before filling pools
  ubi: fastmap: Use free pebs reserved for bad block handling
  ubi: Replace erase_block() with sync_erase()
  ubi: fastmap: Allocate memory with GFP_NOFS in ubi_update_fastmap
  ubi: fastmap: erase_block: Get erase counter from wl_entry rather than flash
  ubi: fastmap: Fix missed ec updating after erasing old fastmap data block
  ubifs: Fix missing error code err
  ubifs: Fix memory leak of bud->log_hash
  ubifs: Fix some kernel-doc comments

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct fw_node.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: linux1394-devel@lists.sourceforge.net
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175334.work.335-kees@kernel.orgSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull i3c updates from Alexandre Belloni:
 "There are now more fixes because as stated in my previous pull
  request, people now have access to actual hardware.

  Core:

   - handle IBI in the proper order

  Drivers:

   - cdns: fix status register access

   - mipi-i3c-hci: many fixes now that the driver has been actually
     tested

   - svc: many IBI fixes, correct compatible string, fix hot join corner
     cases"

* tag 'i3c/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (29 commits)
  i3c: master: handle IBIs in order they came
  i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data.
  i3c: master: svc: fix compatibility string mismatch with binding doc
  i3c: master: svc: fix random hot join failure since timeout error
  i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen
  i3c: master: svc: fix check wrong status register in irq handler
  i3c: master: svc: fix ibi may not return mandatory data byte
  i3c: master: svc: fix wrong data return when IBI happen during start frame
  i3c: master: svc: fix race condition in ibi work thread
  i3c: Fix typo "Provisional ID" to "Provisioned ID"
  i3c: Fix potential refcount leak in i3c_master_register_new_i3c_devs
  i3c: mipi-i3c-hci: Resume controller after aborted transfer
  i3c: mipi-i3c-hci: Resume controller explicitly
  i3c: mipi-i3c-hci: Fix missing xfer->completion in hci_cmd_v1_daa()
  i3c: mipi-i3c-hci: Do not unmap region not mapped for transfer
  i3c: mipi-i3c-hci: Set number of SW enabled Ring Bundles earlier
  i3c: mipi-i3c-hci: Fix race between bus cleanup and interrupt
  i3c: mipi-i3c-hci: Set ring start request together with enable
  i3c: mipi-i3c-hci: Remove BUG() when Ring Abort request times out
  i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
  ...

Pull CXL (Compute Express Link) updates from Dan Williams:
 "The main new functionality this time is work to allow Linux to
  natively handle CXL link protocol errors signalled via PCIe AER for
  current generation CXL platforms. This required some enlightenment of
  the PCIe AER core to workaround the fact that current generation RCH
  (Restricted CXL Host) platforms physically hide topology details and
  registers via a mechanism called RCRB (Root Complex Register Block).

  The next major highlight is reworks to address bugs in parsing region
  configurations for next generation VH (Virtual Host) topologies. The
  old broken algorithm is replaced with a simpler one that significantly
  increases the number of region configurations supported by Linux. This
  is again relevant for error handling so that forward and reverse
  address translation of memory errors can be carried out by Linux for
  memory regions instantiated by platform firmware.

  As for other cross-tree work, the ACPI table parsing code has been
  refactored for reuse parsing the "CDAT" structure which is an
  ACPI-like data structure that is reported by CXL devices. That work is
  in preparation for v6.8 support for CXL QoS. Think of this as dynamic
  generation of NUMA node topology information generated by Linux rather
  than platform firmware.

  Lastly, a number of internal object lifetime issues have been resolved
  along with misc. fixes and feature updates (decoders_committed sysfs
  ABI).

  Summary:

   - Add support for RCH (Restricted CXL Host) Error recovery

   - Fix several region assembly bugs

   - Fix mem-device lifetime issues relative to the sanitize command and
     RCH topology.

   - Refactor ACPI table parsing for CDAT parsing re-use in preparation
     for CXL QOS support"

* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
  lib/fw_table: Remove acpi_parse_entries_array() export
  cxl/pci: Change CXL AER support check to use native AER
  cxl/hdm: Remove broken error path
  cxl/hdm: Fix && vs || bug
  acpi: Move common tables helper functions to common lib
  cxl: Add support for reading CXL switch CDAT table
  cxl: Add checksum verification to CDAT from CXL
  cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
  cxl: Add decoders_committed sysfs attribute to cxl_port
  cxl: Add cxl_decoders_committed() helper
  cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
  cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
  PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
  PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
  cxl/pci: Disable root port interrupts in RCH mode
  cxl/pci: Add RCH downstream port error logging
  cxl/pci: Map RCH downstream AER registers for logging protocol errors
  cxl/pci: Update CXL error logging to use RAS register address
  PCI/AER: Refactor cper_print_aer() for use by CXL driver module
  cxl/pci: Add RCH downstream port AER register discovery
  ...

Pull unified attestation reporting from Dan Williams:
 "In an ideal world there would be a cross-vendor standard attestation
  report format for confidential guests along with a common device
  definition to act as the transport.

  In the real world the situation ended up with multiple platform
  vendors inventing their own attestation report formats with the
  SEV-SNP implementation being a first mover to define a custom
  sev-guest character device and corresponding ioctl(). Later, this
  configfs-tsm proposal intercepted an attempt to add a tdx-guest
  character device and a corresponding new ioctl(). It also anticipated
  ARM and RISC-V showing up with more chardevs and more ioctls().

  The proposal takes for granted that Linux tolerates the vendor report
  format differentiation until a standard arrives. From talking with
  folks involved, it sounds like that standardization work is unlikely
  to resolve anytime soon. It also takes the position that kernfs ABIs
  are easier to maintain than ioctl(). The result is a shared configfs
  mechanism to return per-vendor report-blobs with the option to later
  support a standard when that arrives.

  Part of the goal here also is to get the community into the
  "uncomfortable, but beneficial to the long term maintainability of the
  kernel" state of talking to each other about their differentiation and
  opportunities to collaborate. Think of this like the device-driver
  equivalent of the common memory-management infrastructure for
  confidential-computing being built up in KVM.

  As for establishing an "upstream path for cross-vendor
  confidential-computing device driver infrastructure" this is something
  I want to discuss at Plumbers. At present, the multiple vendor
  proposals for assigning devices to confidential computing VMs likely
  needs a new dedicated repository and maintainer team, but that is a
  discussion for v6.8.

  For now, Greg and Thomas have acked this approach and this is passing
  is AMD, Intel, and Google tests.

  Summary:

   - Introduce configfs-tsm as a shared ABI for confidential computing
     attestation reports

   - Convert sev-guest to additionally support configfs-tsm alongside
     its vendor specific ioctl()

   - Added signed attestation report retrieval to the tdx-guest driver
     forgoing a new vendor specific ioctl()

   - Misc cleanups and a new __free() annotation for kvfree()"

* tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
  virt: tdx-guest: Add Quote generation support using TSM_REPORTS
  virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT
  mm/slab: Add __free() support for kvfree
  virt: sevguest: Prep for kernel internal get_ext_report()
  configfs-tsm: Introduce a shared ABI for attestation reports
  virt: coco: Add a coco/Makefile and coco/Kconfig
  virt: sevguest: Fix passing a stack buffer as a scatterlist target

Pull mtd updates from Miquel Raynal:
 "The main set of changes is related to Uwe's work converting platform
  remove callbacks to return void. Comes next (in number of changes)
  Kees' additional structures annotations to improve the sanitizers. The
  usual amount of cleanups apply.

  About the more substancial contribution, one main function of the
  partitions core could return an error which was not checked, this is
  now fixed. On the bindings side, fixed partitions can now have a
  compression property. Finally, an erroneous situation is now always
  avoided in the MAP RAM driver.

  CFI:

   - A several years old byte swap has been fixed.

  NAND:

   - The subsystem has, as usual, seen a bit of cleanup being done this
     cycle, typically return values of platform_get_irq() and
     devm_kasprintf(). There is also a better ECC check in the Arasan
     driver. This comes with smaller misc changes.

   - In the SPI-NAND world there is now support for Foresee F35SQA002G,
     Winbond W25N and XTX XT26 chips.

  SPI NOR:

   - For SPI NOR we cleaned the flash info entries in order to have them
     slimmer and self explanatory. In order to make the entries as slim
     as possible, we introduced sane default values so that the actual
     flash entries don't need to specify them. We now use a flexible
     macro to specify the flash ID instead of the previous INFOx()
     macros that had hardcoded ID lengths.

     Instead of:

         { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
                 OTP_INFO(256, 3, 0x1000, 0x1000) },

     We now use:

         .id = SNOR_ID(0xef, 0x80, 0x20),
         .name = "w25q512nwm",
         .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),

   - We also removed some flash entries: the very old Catalyst SPI
     EEPROMs that were introduced once with the SPI-NOR subsystem, and a
     Fujitsu MRAM. Both should use the at25 EEPROM driver. The latter
     even has device tree bindings for the at25 driver.

   - We made sure that the conversion didn't introduce any unwanted
     changes by comparing the .rodata segment before and after the
     conversion. The patches landed in linux-next immediately after
     v6.6-rc2, we haven't seen any regressions yet.

   - Apart of the autumn cleaning we introduced a new flash entry,
     at25ff321a, and added block protection support for mt25qu512a"

* tag 'mtd/for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (91 commits)
  mtd: cfi_cmdset_0001: Byte swap OTP info
  mtd: rawnand: meson: check return value of devm_kasprintf()
  mtd: rawnand: intel: check return value of devm_kasprintf()
  mtd: rawnand: sh_flctl: Convert to module_platform_driver()
  mtd: spi-nor: micron-st: use SFDP table for mt25qu512a
  mtd: spi-nor: micron-st: enable lock/unlock for mt25qu512a
  mtd: rawnand: Remove unused of_gpio.h inclusion
  mtd: spinand: Add support for XTX XT26xxxDxxxxx
  mtd: spinand: winbond: add support for serial NAND flash
  mtd: rawnand: cadence: Annotate struct cdns_nand_chip with __counted_by
  mtd: rawnand: Annotate struct mtk_nfc_nand_chip with __counted_by
  mtd: spinand: add support for FORESEE F35SQA002G
  mtd: rawnand: rockchip: Use struct_size()
  mtd: rawnand: arasan: Include ECC syndrome along with in-band data while checking for ECC failure
  mtd: Use device_get_match_data()
  mtd: spi-nor: nxp-spifi: Convert to platform remove callback returning void
  mtd: spi-nor: hisi-sfc: Convert to platform remove callback returning void
  mtd: maps: sun_uflash: Convert to platform remove callback returning void
  mtd: maps: sa1100-flash: Convert to platform remove callback returning void
  mtd: maps: pxa2xx-flash: Convert to platform remove callback returning void
  ...

Pull drm nouveau GSP support from Dave Airlie:
 "This adds the initial support for the NVIDIA GSP firmware to nouveau.

  This firmware is a new direction for Turing+ GPUs, and is only enabled
  by default on Ada generation. Other generations need to use
  nouveau.config=NvGspRm=1

  The GSP firmware takes nearly all the GPU init and power management
  tasks onto a risc-v CPU on the GPU.

  This series is mostly the work from Ben Skeggs, and Dave added some
  patches to rebase it to the latest firmware release which is where we
  will stay for as long as possible as the firmwares have no ABI
  stability"

* tag 'topic/nvidia-gsp-2023-11-03' of git://anongit.freedesktop.org/drm/drm: (49 commits)
  nouveau/gsp: add some basic registry entries.
  nouveau/gsp: fix message signature.
  nouveau/gsp: move to 535.113.01
  nouveau/disp: fix post-gsp build on 32-bit arm.
  nouveau: fix r535 build on 32-bit arm.
  drm/nouveau/ofa/r535: initial support
  drm/nouveau/nvjpg/r535: initial support
  drm/nouveau/nvenc/r535: initial support
  drm/nouveau/nvdec/r535: initial support
  drm/nouveau/gr/r535: initial support
  drm/nouveau/ce/r535: initial support
  drm/nouveau/fifo/r535: initial support
  drm/nouveau/disp/r535: initial support
  drm/nouveau/mmu/r535: initial support
  drm/nouveau/gsp/r535: add interrupt handling
  drm/nouveau/gsp/r535: add support for rm alloc
  drm/nouveau/gsp/r535: add support for rm control
  drm/nouveau/gsp/r535: add support for booting GSP-RM
  drm/nouveau/nvkm: support loading fws into sg_table
  drm/nouveau/kms/tu102-: disable vbios parsing when running on RM
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this cycle, we introduce a bigger page size support by changing the
  internal f2fs's block size aligned to the page size. We also continue
  to improve zoned block device support regarding the power off
  recovery. As usual, there are some bug fixes regarding the error
  handling routines in compression and ioctl.

  Enhancements:
   - Support Block Size == Page Size
   - let f2fs_precache_extents() traverses in file range
   - stop iterating f2fs_map_block if hole exists
   - preload extent_cache for POSIX_FADV_WILLNEED
   - compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()

  Bug fixes:
   - do not return EFSCORRUPTED, but try to run online repair
   - finish previous checkpoints before returning from remount
   - fix error handling of __get_node_page and __f2fs_build_free_nids
   - clean up zones when not successfully unmounted
   - fix to initialize map.m_pblk in f2fs_precache_extents()
   - fix to drop meta_inode's page cache in f2fs_put_super()
   - set the default compress_level on ioctl
   - fix to avoid use-after-free on dic
   - fix to avoid redundant compress extension
   - do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
   - fix deadloop in f2fs_write_cache_pages()"

* tag 'f2fs-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: finish previous checkpoints before returning from remount
  f2fs: fix error handling of __get_node_page
  f2fs: do not return EFSCORRUPTED, but try to run online repair
  f2fs: fix error path of __f2fs_build_free_nids
  f2fs: Clean up errors in segment.h
  f2fs: clean up zones when not successfully unmounted
  f2fs: let f2fs_precache_extents() traverses in file range
  f2fs: avoid format-overflow warning
  f2fs: fix to initialize map.m_pblk in f2fs_precache_extents()
  f2fs: Support Block Size == Page Size
  f2fs: stop iterating f2fs_map_block if hole exists
  f2fs: preload extent_cache for POSIX_FADV_WILLNEED
  f2fs: set the default compress_level on ioctl
  f2fs: compress: fix to avoid fragment w/ OPU during f2fs_ioc_compress_file()
  f2fs: fix to drop meta_inode's page cache in f2fs_put_super()
  f2fs: split initial and dynamic conditions for extent_cache
  f2fs: compress: fix to avoid redundant compress extension
  f2fs: compress: do sanity check on cluster when CONFIG_F2FS_CHECK_FS is on
  f2fs: compress: fix to avoid use-after-free on dic
  f2fs: compress: fix deadloop in f2fs_write_cache_pages()

Pull 9p updates from Dominique Martinet:
 A bunch of small fixes:

   - three W=1 warning fixes: the NULL -> "" replacement isn't trivial
     but is serialized identically by the protocol layer and has been
     tested

   - one syzbot/KCSAN datarace annotation where we don't care about
     users messing with the fd they passed to mount -t 9p

   - removing a declaration without implementation

   - yet another race fix for trans_fd around connection close: the
     'err' field is also used in potentially racy calls and this isn't
     complete, but it's better than what we had

   - and finally a theorical memory leak fix on serialization failure"

* tag '9p-for-6.7-rc1' of https://github.com/martinetd/linux:
  9p/net: fix possible memory leak in p9_check_errors()
  9p/fs: add MODULE_DESCRIPTION
  9p/net: xen: fix false positive printf format overflow warning
  9p: v9fs_listxattr: fix %s null argument warning
  9p/trans_fd: Annotate data-racy writes to file::f_flags
  fs/9p: Remove unused function declaration v9fs_inode2stat()
  9p/trans_fd: avoid sending req to a cancelled conn

Pull smb client updates from Steve French:

 - use after free fixes and deadlock fix

 - symlink timestamp fix

 - hashing perf improvement

 - multichannel fixes

 - minor debugging improvements

 - fix creating fifos when using "sfu" mounts

 - NTLMSSP authentication improvement

 - minor fixes to include some missing create flags and structures from
   recently updated protocol documentation

* tag '6.7-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: force interface update before a fresh session setup
  cifs: do not reset chan_max if multichannel is not supported at mount
  cifs: reconnect helper should set reconnect for the right channel
  smb: client: fix use-after-free in smb2_query_info_compound()
  smb: client: remove extra @chan_count check in __cifs_put_smb_ses()
  cifs: add xid to query server interface call
  cifs: print server capabilities in DebugData
  smb: use crypto_shash_digest() in symlink_hash()
  smb: client: fix use-after-free bug in cifs_debug_data_proc_show()
  smb: client: fix potential deadlock when releasing mids
  smb3: fix creating FIFOs when mounting with "sfu" mount option
  Add definition for new smb3.1.1 command type
  SMB3: clarify some of the unused CreateOption flags
  cifs: Add client version details to NTLM authenticate message
  smb3: fix touch -h of symlink

Pull EFI update from Ard Biesheuvel:
 "This is the only remaining EFI change, as everything else was taken
  via -tip this cycle:

   - implement uid/gid mount options for efivarfs"

* tag 'efi-next-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efivarfs: Add uid/gid mount options

Document the Inter-Processor Communication Controller on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull x86 microcode loading updates from Borislac Petkov:
 "Major microcode loader restructuring, cleanup and improvements by
  Thomas Gleixner:

   - Restructure the code needed for it and add a temporary initrd
     mapping on 32-bit so that the loader can access the microcode
     blobs. This in itself is a preparation for the next major
     improvement:

   - Do not load microcode on 32-bit before paging has been enabled.

     Handling this has caused an endless stream of headaches, issues,
     ugly code and unnecessary hacks in the past. And there really
     wasn't any sensible reason to do that in the first place. So switch
     the 32-bit loading to happen after paging has been enabled and turn
     the loader code "real purrty" again

   - Drop mixed microcode steppings loading on Intel - there, a single
     patch loaded on the whole system is sufficient

   - Rework late loading to track which CPUs have updated microcode
     successfully and which haven't, act accordingly

   - Move late microcode loading on Intel in NMI context in order to
     guarantee concurrent loading on all threads

   - Make the late loading CPU-hotplug-safe and have the offlined
     threads be woken up for the purpose of the update

   - Add support for a minimum revision which determines whether late
     microcode loading is safe on a machine and the microcode does not
     change software visible features which the machine cannot use
     anyway since feature detection has happened already. Roughly, the
     minimum revision is the smallest revision number which must be
     loaded currently on the system so that late updates can be allowed

   - Other nice leanups, fixess, etc all over the place"

* tag 'x86_microcode_for_v6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  x86/microcode/intel: Add a minimum required revision for late loading
  x86/microcode: Prepare for minimal revision check
  x86/microcode: Handle "offline" CPUs correctly
  x86/apic: Provide apic_force_nmi_on_cpu()
  x86/microcode: Protect against instrumentation
  x86/microcode: Rendezvous and load in NMI
  x86/microcode: Replace the all-in-one rendevous handler
  x86/microcode: Provide new control functions
  x86/microcode: Add per CPU control field
  x86/microcode: Add per CPU result state
  x86/microcode: Sanitize __wait_for_cpus()
  x86/microcode: Clarify the late load logic
  x86/microcode: Handle "nosmt" correctly
  x86/microcode: Clean up mc_cpu_down_prep()
  x86/microcode: Get rid of the schedule work indirection
  x86/microcode: Mop up early loading leftovers
  x86/microcode/amd: Use cached microcode for AP load
  x86/microcode/amd: Cache builtin/initrd microcode early
  x86/microcode/amd: Cache builtin microcode too
  x86/microcode/amd: Use correct per CPU ucode_cpu_info
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Implement the binary search in modpost for faster symbol lookup

 - Respect HOSTCC when linking host programs written in Rust

 - Change the binrpm-pkg target to generate kernel-devel RPM package

 - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE

 - Unify vdso_install rules

 - Remove unused __memexit* annotations

 - Eliminate stale whitelisting for __devinit/__devexit from modpost

 - Enable dummy-tools to handle the -fpatchable-function-entry flag

 - Add 'userldlibs' syntax

* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kbuild: support 'userldlibs' syntax
  kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
  kbuild: Correct missing architecture-specific hyphens
  modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
  modpost: merge sectioncheck table entries regarding init/exit sections
  modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
  modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
  modpost: remove EXIT_SECTIONS macro
  modpost: remove MEM_INIT_SECTIONS macro
  modpost: remove more symbol patterns from the section check whitelist
  modpost: disallow *driver to reference .meminit* sections
  linux/init: remove __memexit* annotations
  modpost: remove ALL_EXIT_DATA_SECTIONS macro
  kbuild: simplify cmd_ld_multi_m
  kbuild: avoid too many execution of scripts/pahole-flags.sh
  kbuild: remove ARCH_POSTLINK from module builds
  kbuild: unify no-compiler-targets and no-sync-config-targets
  kbuild: unify vdso_install rules
  docs: kbuild: add INSTALL_DTBS_PATH
  UML: remove unused cmd_vdso_install
  ...