Do not always add NETDEV_XDP_ACT_XSK_ZEROCOPY bit in xdp_features flag
but check if the NIC really supports it.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/3dba6ea42dc343a9f2d7d1a6a6a6c173235e1ebf.1676471386.git.lorenzo@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "Just a final collection of misc fixes, the biggest disables the
  recently added dynamic debugging support, it has a regression that
  needs some bigger fixes.

  Otherwise a bunch of fixes across the board, vc4, amdgpu and vmwgfx
  mostly, with some smaller i915 and ast fixes.

  drm:
   - dynamic debug disable for now

  fbdev:
   - deferred i/o device close fix

  amdgpu:
   - Fix GC11.x suspend warning
   - Fix display warning

  vc4:
   - YUV planes fix
   - hdmi display fix
   - crtc reduced blanking fix

  ast:
   - fix start address computation

  vmwgfx:
   - fix bo/handle races

  i915:
   - gen11 WA fix"

* tag 'drm-fixes-2023-02-17' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Fail atomic_check early on normalize_zpos error
  drm/amd/amdgpu: fix warning during suspend
  drm/vmwgfx: Do not drop the reference to the handle too soon
  drm/vmwgfx: Stop accessing buffer objects which failed init
  drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT list
  drm: Disable dynamic debug as broken
  drm/ast: Fix start address computation
  fbdev: Fix invalid page access after closing deferred I/O devices
  drm/vc4: crtc: Increase setup cost in core clock calculation to handle extreme reduced blanking
  drm/vc4: hdmi: Always enable GCP with AVMUTE cleared
  drm/vc4: Fix YUV plane handling when planes are in different buffers

Merge tag 'drm-intel-fixes-2023-02-16' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Moving gen11 hw wa to the right place. (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y+47eUvwbafER35/@intel.com

Multiple fixes in vc4 to address issues with YUV planes, HDMI and CRTC;
an invalid page access fix for fbdev, mark dynamic debug as broken, a
double free and refcounting fix for vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216091905.i5wswy4dd74x4br5@houat

Merge tag 'amd-drm-fixes-6.2-2023-02-15' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.2-2023-02-15:

amdgpu:
- Fix GC11.x suspend warning
- Fix display warning
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216041122.7714-1-alexander.deucher@amd.com

Pull networking fixes from Jakub Kicinski:
 "Fixes from the main networking tree only, probably because all
  sub-trees have backed off and haven't submitted their changes.

  None of the fixes here are particularly scary and no outstanding
  regressions. In an ideal world the "current release" sections would be
  empty at this stage but that never happens.

  Current release - regressions:

   - fix unwanted sign extension in netdev_stats_to_stats64()

  Current release - new code bugs:

   - initialize net->notrefcnt_tracker earlier

   - devlink: fix netdev notifier chain corruption

   - nfp: make sure mbox accesses in IPsec code are atomic

   - ice: fix check for weight and priority of a scheduling node

  Previous releases - regressions:

   - ice: xsk: fix cleaning of XDP_TX frame, prevent inf loop

   - igb: fix I2C bit banging config with external thermal sensor

  Previous releases - always broken:

   - sched: tcindex: update imperfect hash filters respecting rcu

   - mpls: fix stale pointer if allocation fails during device rename

   - dccp/tcp: avoid negative sk_forward_alloc by ipv6_pinfo.pktoptions

   - remove WARN_ON_ONCE(sk->sk_forward_alloc) from
     sk_stream_kill_queues()

   - af_key: fix heap information leak

   - ipv6: fix socket connection with DSCP (correct interpretation of
     the tclass field vs fib rule matching)

   - tipc: fix kernel warning when sending SYN message

   - vmxnet3: read RSS information from the correct descriptor (eop)"

* tag 'net-6.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  devlink: Fix netdev notifier chain corruption
  igb: conditionalize I2C bit banging on external thermal sensor support
  net: mpls: fix stale pointer if allocation fails during device rename
  net/sched: tcindex: search key must be 16 bits
  tipc: fix kernel warning when sending SYN message
  igb: Fix PPS input and output using 3rd and 4th SDP
  net: use a bounce buffer for copying skb->mark
  ixgbe: add double of VLAN header when computing the max MTU
  i40e: add double of VLAN header when computing the max MTU
  ixgbe: allow to increase MTU to 3K with XDP enabled
  net: stmmac: Restrict warning on disabling DMA store and fwd mode
  net/sched: act_ctinfo: use percpu stats
  net: stmmac: fix order of dwmac5 FlexPPS parametrization sequence
  ice: fix lost multicast packets in promisc mode
  ice: Fix check for weight and priority of a scheduling node
  bnxt_en: Fix mqprio and XDP ring checking logic
  net: Fix unwanted sign extension in netdev_stats_to_stats64()
  net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path
  net: openvswitch: fix possible memory leak in ovs_meter_cmd_set()
  af_key: Fix heap information leak
  ...

Pull block fixes from Jens Axboe:
 "Just a few NVMe fixes that should go into the 6.2 release, adding a
  quirk and fixing two issues introduced in this release:

   - NVMe fixes via Christoph:
       - Always return an ERR_PTR from nvme_pci_alloc_dev (Irvin Cote)
       - Add bogus ID quirk for ADATA SX6000PNP (Daniel Wagner)
       - Set the DMA mask earlier (Christoph Hellwig)"

* tag 'block-6.2-2023-02-16' of git://git.kernel.dk/linux:
  nvme-pci: always return an ERR_PTR from nvme_pci_alloc_dev
  nvme-pci: set the DMA mask earlier
  nvme-pci: add bogus ID quirk for ADATA SX6000PNP

Pull spi fix from Mark Brown:
 "One more last minute patch for v6.2 updating the parsing of the newly
  added spi-cs-setup-delay-ns.

  It's been pointed out that due to the way DT parsing works the change
  in property size is ABI visible so let's not let a release go out
  without it being fixed. The change got split from some earlier ABI
  related fixes to the property since the first version sent had a build
  error"

* tag 'spi-v6.2-rc8-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Use a 32-bit DT property for spi-cs-setup-delay-ns

Pull gpio fixes from Bartosz Golaszewski:

 - fix a potential Kconfig issue with gpio-mlxbf2 not selecting
   GPIOLIB_IRQCHIP

 - another immutable irqchip conversion, this time for gpio-vf610

 - fix a wakeup issue on Clevo NH5xAx

* tag 'gpio-fixes-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mlxbf2: select GPIOLIB_IRQCHIP
  gpiolib: acpi: Add a ignore wakeup quirk for Clevo NH5xAx
  gpio: vf610: make irq_chip immutable
  gpiolib: acpi: remove redundant declaration

The uuid code is very low maintainance now that the major overhaul
has completed, and doesn't need it's own tree.  All the recent work
has been done by Andy who'd like to stay on as a reviewer without an
explicit tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This code has been stale for years and I have no way to test it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Leon Romanovsky says:

====================
mlx5-next changes

Following previous conversations [1] and our clear commitment to do
the TC work [2], please pull mlx5-next shared branch, which includes
low-level steering logic to allow RoCEv2 traffic to be encrypted/
decrypted through IPsec.

[1] https://lore.kernel.org/all/20230126230815.224239-1-saeed@kernel.org/
[2] https://lore.kernel.org/all/Y+Z7lVVWqnRBiPh2@nvidia.com/

* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
  net/mlx5: Configure IPsec steering for egress RoCEv2 traffic
  net/mlx5: Configure IPsec steering for ingress RoCEv2 traffic
  net/mlx5: Add IPSec priorities in RDMA namespaces
  net/mlx5: Implement new destination type TABLE_TYPE
  net/mlx5: Introduce new destination type TABLE_TYPE
====================

Link: https://lore.kernel.org/r/20230215095624.1365200-1-leon@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Major stack changes:
 * EHT channel puncturing support (client & AP)
 * some support for AP MLD without mac80211
 * fixes for A-MSDU on mesh connections

Major driver changes:

iwlwifi
 * EHT rate reporting
 * Bump FW API to 74 for AX devices
 * STEP equalizer support: transfer some STEP (connection to radio
   on platforms with integrated wifi) related parameters from the
   BIOS to the firmware

mt76
 * switch to using page pool allocator
 * mt7996 EHT (Wi-Fi 7) support
 * Wireless Ethernet Dispatch (WED) reset support

libertas
 * WPS enrollee support

brcmfmac
 * Rename Cypress 89459 to BCM4355
 * BCM4355 and BCM4377 support

mwifiex
 * SD8978 chipset support

rtl8xxxu
 * LED support

ath12k
 * new driver for Qualcomm Wi-Fi 7 devices

ath11k
 * IPQ5018 support
 * Fine Timing Measurement (FTM) responder role support
 * channel 177 support

ath10k
 * store WLAN firmware version in SMEM image table

* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
  wifi: brcmfmac: p2p: Introduce generic flexible array frame member
  wifi: mac80211: add documentation for amsdu_mesh_control
  wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
  wifi: mac80211: always initialize link_sta with sta
  wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
  wifi: cfg80211: Set SSID if it is not already set
  wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
  wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
  wifi: rtw88: usb: drop now unnecessary URB size check
  wifi: rtw88: usb: send Zero length packets if necessary
  wifi: rtw88: usb: Set qsel correctly
  wifi: mac80211: fix off-by-one link setting
  wifi: mac80211: Fix for Rx fragmented action frames
  wifi: mac80211: avoid u32_encode_bits() warning
  wifi: mac80211: Don't translate MLD addresses for multicast
  wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
  wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
  wifi: nl80211: Allow authentication frames and set keys on NAN interface
  wifi: mac80211: fix non-MLO station association
  wifi: mac80211: Allow NSS change only up to capability
  ...
====================

Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'intel-gpio-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current

intel-gpio for v6.2-2

* Ignore spurious wakeup by touchpad on Clevo NH5xAx
* Miscellaneous fix(es)

Andrea Mayer says:

====================
seg6: add PSP flavor support for SRv6 End behavior

Segment Routing for IPv6 (SRv6 in short) [1] is the instantiation of the
Segment Routing (SR) [2] architecture on the IPv6 dataplane.
In SRv6, the segment identifiers (SID) are IPv6 addresses and the segment list
(SID List) is carried in the Segment Routing Header (SRH). A segment may be
bound to a specific packet processing operation called "behavior". The RFC8986
[3] defines and standardizes the most common/relevant behaviors for network
operators, e.g., End, End.X and End.T and so on.

The RFC8986 also introduces the "flavors" framework aiming to modify or extend
the capabilities of SRv6 End, End.X and End.T behaviors. Specifically, these
behaviors support the following flavors (either individually or in
combinations):
 - Penultimate Segment Pop (PSP);
 - Ultimate Segment Pop (USP);
 - Ultimate Segment Decapsulation (USD).

Such flavors enable an End/End.X/End.T behavior to pop the SRH on the
penultimate/ultimate SR endpoint node listed in the SID List or to perform a
full decapsulation.

Currently, the Linux kernel supports a large subset of behaviors described in
RFC8986, including the End, End.X and End.T. However, PSP, USP and USD flavors
have not yet been implemented.

In this patchset, we extend the SRv6 subsystem to implement the PSP flavor in
the SRv6 End behavior. To accomplish this task, we leverage the flavor
framework previously introduced by another patchset required for supporting the
efficient representation of the SID List through the NEXT-C-SID mechanism [4].

In details, the patchset is made of:
 - patch 1/3: seg6: factor out End lookup nexthop processing to a dedicated
              function
 - patch 2/3: seg6: add PSP flavor support for SRv6 End behavior
 - patch 3/3: selftests: seg6: add selftest for PSP flavor in SRv6 End
              behavior

From the user space perspective, we do not need to change the iproute2 code to
support the PSP flavor. However, we provide the man page for the PSP flavor in
a separate patch.

Comments, improvements and suggestions are always appreciated.

[1] - RFC8754: https://datatracker.ietf.org/doc/html/rfc8754
[2] - RFC8402: https://datatracker.ietf.org/doc/html/rfc8402
[3] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986
[4] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
====================

Link: https://lore.kernel.org/r/20230215134659.7613-1-andrea.mayer@uniroma2.itSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This selftest is designed for testing the PSP flavor in SRv6 End behavior.
It instantiates a virtual network composed of several nodes: hosts and
SRv6 routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test makes use of the SRv6 End behavior and of the PSP flavor needed
for removing the SRH from the IPv6 header at the penultimate node.

The correct execution of the behavior is verified through reachability
tests carried out between hosts.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The "flavors" framework defined in RFC8986 [1] represents additional
operations that can modify or extend a subset of existing behaviors such as
SRv6 End, End.X and End.T. We report these flavors hereafter:
 - Penultimate Segment Pop (PSP);
 - Ultimate Segment Pop (USP);
 - Ultimate Segment Decapsulation (USD).

Depending on how the Segment Routing Header (SRH) has to be handled, an
SRv6 End* behavior can support these flavors either individually or in
combinations.
In this patch, we only consider the PSP flavor for the SRv6 End behavior.

A PSP enabled SRv6 End behavior is used by the Source/Ingress SR node
(i.e., the one applying the SRv6 Policy) when it needs to instruct the
penultimate SR Endpoint node listed in the SID List (carried by the SRH) to
remove the SRH from the IPv6 header.

Specifically, a PSP enabled SRv6 End behavior processes the SRH by:
   i) decreasing the Segment Left (SL) from 1 to 0;
  ii) copying the Last Segment IDentifier (SID) into the IPv6 Destination
      Address (DA);
 iii) removing (i.e., popping) the outer SRH from the extension headers
      following the IPv6 header.

It is important to note that PSP operation (steps i, ii, iii) takes place
only at a penultimate SR Segment Endpoint node (i.e., when the SL=1) and
does not happen at non-penultimate Endpoint nodes. Indeed, when a SID of
PSP flavor is processed at a non-penultimate SR Segment Endpoint node, the
PSP operation is not performed because it would not be possible to decrease
the SL from 1 to 0.

                                                 SL=2 SL=1 SL=0
                                                   |    |    |
For example, given the SRv6 policy (SID List := <  X,   Y,   Z  >):
 - a PSP enabled SRv6 End behavior bound to SID "Y" will apply the PSP
   operation as Segment Left (SL) is 1, corresponding to the Penultimate
   Segment of the SID List;
 - a PSP enabled SRv6 End behavior bound to SID "X" will *NOT* apply the
   PSP operation as the Segment Left is 2. This behavior instance will
   apply the "standard" End packet processing, ignoring the configured PSP
   flavor at all.

[1] - RFC8986: https://datatracker.ietf.org/doc/html/rfc8986Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The End nexthop lookup/input operations are moved into a new helper
function named input_action_end_finish(). This avoids duplicating the
code needed to compute the nexthop in the different flavors of the End
behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 3d7316ac ("net: dsa: ocelot: add external ocelot switch
control") adds config NET_DSA_MSCC_OCELOT_EXT, which selects the
non-existing config MFD_OCELOT_CORE.

Replace this select with the intended and existing MFD_OCELOT.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20230215104631.31568-1-lukas.bulwahn@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Alejandro Lucero says:

====================
sfc: devlink support for ef100

This patchset adds devlink port support for ef100 allowing setting VFs
mac addresses through the VF representor devlink ports.

Basic devlink infrastructure is first introduced, then support for info
command. Next changes for enumerating MAE ports which will be used for
devlink port creation when netdevs are registered.

Adding support for devlink port_function_hw_addr_get requires changes in
the ef100 driver for getting the mac address based on a client handle.
This allows to obtain VFs mac addresses during netdev initialization as
well what is included in patch 6.

Such client handle is used in patches 7 and 8 for getting and setting
devlink port addresses.
====================

Link: https://lore.kernel.org/r/20230215090828.11697-1-alejandro.lucero-palau@amd.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Using the builtin client handle id infrastructure, add support for
setting the mac address linked to mports in ef100. This implies to
execute an MCDI command for giving the address to the firmware for
the specific devlink port.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Using the builtin client handle id infrastructure, add support for
obtaining the mac address linked to mports in ef100. This implies
to execute an MCDI command for getting the data from the firmware
for each devlink port.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Getting device mac address is currently based on a specific MCDI command
only available for the PF. This patch changes the MCDI command to a
generic one for PFs and VFs based on a client handle. This allows both
PFs and VFs to ask for their mac address during initialization using the
CLIENT_HANDLE_SELF.

Moreover, the patch allows other client handles which will be used by
the PF to ask for mac addresses linked to VFs. This is necessary for
suporting the port_function_hw_addr_get devlink function in further
patches.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Using the data when enumerating mports, create devlink ports just before
netdevs are registered and remove those devlink ports after netdev has
been unregistered.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Obtaining mport id is based on asking the firmware about it. This is
still needed for mport initialization itself, but once the mport data is
now kept by the driver, further mport id request can be satisfied
internally without firmware interaction.

Previous function is just modified in name making clear the firmware
interaction. The new function uses the old name and looks for the data
in the mport data structure.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

MAE ports (mports) are the ports on the EF100 embedded switch such
as networking PCIe functions, the physical port, and potentially
others.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Add devlink infrastructure support. Further patches add devlink
info and devlink port support.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Cited commit changed devlink to register its netdev notifier block on
the global netdev notifier chain instead of on the per network namespace
one.

However, when changing the network namespace of the devlink instance,
devlink still tries to unregister its notifier block from the chain of
the old namespace and register it on the chain of the new namespace.
This results in corruption of the notifier chains, as the same notifier
block is registered on two different chains: The global one and the per
network namespace one. In turn, this causes other problems such as the
inability to dismantle namespaces due to netdev reference count issues.

Fix by preventing devlink from moving its notifier block between
namespaces.

Reproducer:

 # echo "10 1" > /sys/bus/netdevsim/new_device
 # ip netns add test123
 # devlink dev reload netdevsim/netdevsim10 netns test123
 # ip netns del test123
 [   71.935619] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [   71.938348] leaked reference.

Fixes: 565b4824 ("devlink: change port event netdev notifier from per-net to global")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230215073139.1360108-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pedro Tammela says:

====================
net/sched: transition actions to pcpu stats and rcu

Following the work done for act_pedit[0], transition the remaining tc
actions to percpu stats and rcu, whenever possible.
Percpu stats make updating the action stats very cheap, while combining
it with rcu action parameters makes it possible to get rid of the per
action lock in the datapath.

For act_connmark and act_nat we run the following tests:
- tc filter add dev ens2f0 ingress matchall action connmark
- tc filter add dev ens2f0 ingress matchall action nat ingress any 10.10.10.10

Our setup consists of a 26 cores Intel CPU and a 25G NIC.
We use TRex to shoot 10mpps TCP packets and take perf measurements.
Both actions improved performance as expected since the datapath lock disappeared.

For act_pedit we move the drop counter to percpu, when available.
For act_gate we move the counters to percpu, when available.

[0] https://lore.kernel.org/all/20230131145149.3776656-1-pctammela@mojatatu.com/
====================

Link: https://lore.kernel.org/r/20230214211534.735718-1-pctammela@mojatatu.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Since act_pedit now has access to percpu counters, use the
tcf_action_inc_overlimit_qstats wrapper that will use the percpu
counter whenever they are available.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The tc action act_gate was using shared stats, move it to percpu stats.

tdc results:
1..12
ok 1 5153 - Add gate action with priority and sched-entry
ok 2 7189 - Add gate action with base-time
ok 3 a721 - Add gate action with cycle-time
ok 4 c029 - Add gate action with cycle-time-ext
ok 5 3719 - Replace gate base-time action
ok 6 d821 - Delete gate action with valid index
ok 7 3128 - Delete gate action with invalid index
ok 8 7837 - List gate actions
ok 9 9273 - Flush gate actions
ok 10 c829 - Add gate action with duplicate index
ok 11 3043 - Add gate action with invalid index
ok 12 2930 - Add gate action with cookie
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The tc action act_connmark was using shared stats and taking the per
action lock in the datapath. Improve it by using percpu stats and rcu.

perf before:
- 13.55% tcf_connmark_act
   - 81.18% _raw_spin_lock
       80.46% native_queued_spin_lock_slowpath

perf after:
- 2.85% tcf_connmark_act

tdc results:
1..15
ok 1 2002 - Add valid connmark action with defaults
ok 2 56a5 - Add valid connmark action with control pass
ok 3 7c66 - Add valid connmark action with control drop
ok 4 a913 - Add valid connmark action with control pipe
ok 5 bdd8 - Add valid connmark action with control reclassify
ok 6 b8be - Add valid connmark action with control continue
ok 7 d8a6 - Add valid connmark action with control jump
ok 8 aae8 - Add valid connmark action with zone argument
ok 9 2f0b - Add valid connmark action with invalid zone argument
ok 10 9305 - Add connmark action with unsupported argument
ok 11 71ca - Add valid connmark action and replace it
ok 12 5f8f - Add valid connmark action with cookie
ok 13 c506 - Replace connmark with invalid goto chain control
ok 14 6571 - Delete connmark action with valid index
ok 15 3426 - Delete connmark action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The tc action act_nat was using shared stats and taking the per action
lock in the datapath. Improve it by using percpu stats and rcu.

perf before:
- 10.48% tcf_nat_act
   - 81.83% _raw_spin_lock
        81.08% native_queued_spin_lock_slowpath

perf after:
- 0.48% tcf_nat_act

tdc results:
1..27
ok 1 7565 - Add nat action on ingress with default control action
ok 2 fd79 - Add nat action on ingress with pipe control action
ok 3 eab9 - Add nat action on ingress with continue control action
ok 4 c53a - Add nat action on ingress with reclassify control action
ok 5 76c9 - Add nat action on ingress with jump control action
ok 6 24c6 - Add nat action on ingress with drop control action
ok 7 2120 - Add nat action on ingress with maximum index value
ok 8 3e9d - Add nat action on ingress with invalid index value
ok 9 f6c9 - Add nat action on ingress with invalid IP address
ok 10 be25 - Add nat action on ingress with invalid argument
ok 11 a7bd - Add nat action on ingress with DEFAULT IP address
ok 12 ee1e - Add nat action on ingress with ANY IP address
ok 13 1de8 - Add nat action on ingress with ALL IP address
ok 14 8dba - Add nat action on egress with default control action
ok 15 19a7 - Add nat action on egress with pipe control action
ok 16 f1d9 - Add nat action on egress with continue control action
ok 17 6d4a - Add nat action on egress with reclassify control action
ok 18 b313 - Add nat action on egress with jump control action
ok 19 d9fc - Add nat action on egress with drop control action
ok 20 a895 - Add nat action on egress with DEFAULT IP address
ok 21 2572 - Add nat action on egress with ANY IP address
ok 22 37f3 - Add nat action on egress with ALL IP address
ok 23 6054 - Add nat action on egress with cookie
ok 24 79d6 - Add nat action on ingress with cookie
ok 25 4b12 - Replace nat action with invalid goto chain control
ok 26 b811 - Delete nat action with valid index
ok 27 a521 - Delete nat action with invalid index
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Jesse Brandeburg says:

====================
net/core: commmon prints for promisc

Add a print to the kernel log for allmulticast entry and exit, and
standardize the print for entry and exit of promiscuous mode.

These prints are useful to both user and developer and should have the
triggering driver/bus/device info that netdev_info (optionally) gives.
====================

Link: https://lore.kernel.org/r/20230214210117.23123-1-jesse.brandeburg@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The kernel stack can be more consistent by printing the IFF_PROMISC
aka promiscuous enable/disable messages with the standard netdev_info
message which can include bus and driver info as well as the device.

typical command usage from user space looks like:
ip link set eth0 promisc <on|off>

But lots of utilities such as bridge, tcpdump, etc put the interface into
promiscuous mode.

old message:
[  406.034418] device eth0 entered promiscuous mode
[  408.424703] device eth0 left promiscuous mode

new message:
[  406.034431] ice 0000:17:00.0 eth0: entered promiscuous mode
[  408.424715] ice 0000:17:00.0 eth0: left promiscuous mode
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When the user sets or clears the IFF_ALLMULTI flag in the netdev, there are
no log messages printed to the kernel log to indicate anything happened.
This is inexplicably different from most other dev->flags changes, and
could suprise the user.

Typically this occurs from user-space when a user:
ip link set eth0 allmulticast <on|off>

However, other devices like bridge set allmulticast as well, and many
other flows might trigger entry into allmulticast as well.

The new message uses the standard netdev_info print and looks like:
[  413.246110] ixgbe 0000:17:00.0 eth0: entered allmulticast mode
[  415.977184] ixgbe 0000:17:00.0 eth0: left allmulticast mode
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Silence run-time memcpy() false positive warning when processing
management frames:

  memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26)

Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via
__builtin_dynamic_object_size) doesn't recognize that the union may end
with a flexible array, and returns "26" (the fixed size of the union),
rather than the remaining size of the allocation. Add an explicit
flexible array member and set it as the destination here, so that we
get the correct coverage for the memcpy().

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832Reported-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Brian Henriquez <brian.henriquez@cypress.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org
[rename 'frame' to 'body']
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Jamal Hadi Salim says:

====================
net/sched: Retire some tc qdiscs and classifiers

The CBQ + dsmark qdiscs and the tcindex + rsvp classifiers have served us for
over 2 decades. Unfortunately, they have not been getting much attention due
to reduced usage. While we dont have a good metric for tabulating how much use
a specific kernel feature gets, for these specific features we observed that
some of the functionality has been broken for some time and no users complained.
In addition, syzkaller has been going to town on most of these and finding
issues; and while we have been fixing those issues, at times it becomes obvious
that we would need to perform bigger surgeries to resolve things found while
getting a syzkaller fix in place. After some discussion we feel that in order
to reduce the maintenance burden it is best to retire them.

This patchset leaves the UAPI alone. I could send another version which deletes
the UAPI as well. AFAIK, this has not been done before - so it wasnt clear what
how to handle UAPI. It seems legit to just delete it but we would need to
coordinate with iproute2 (given they sync up with kernel uapi headers). There
are probably other users we don't know of that copy kernel headers.
If folks feel differently I will resend the patches deleting UAPI for these
qdiscs and classifiers.

I will start another thread on iproute2 before sending any patches to iproute2.
====================

Link: https://lore.kernel.org/r/20230214134915.199004-1-jhs@mojatatu.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>