- 07 Jun, 2023 1 commit
-
-
Marc Zyngier authored
When reworking the vgic locking, the vgic distributor registration got simplified, which was a very good cleanup. But just a tad too radical, as we now register the *native* vgic only, ignoring the GICv2-on-GICv3 that allows pre-historic VMs (or so I thought) to run. As it turns out, QEMU still defaults to GICv2 in some cases, and this breaks Nathan's setup! Fix it by propagating the *requested* vgic type rather than the host's version. Fixes: 59112e9c ("KVM: arm64: vgic: Fix a circular locking issue") Reported-by:
Nathan Chancellor <nathan@kernel.org> Tested-by:
Marc Zyngier <maz@kernel.org> link: https://lore.kernel.org/r/20230606221525.GA2269598@dev-arch.thelio-3990X
-
- 04 Jun, 2023 2 commits
-
-
Reiji Watanabe authored
Currently, with VHE, KVM sets ER, CR, SW and EN bits of PMUSERENR_EL0 to 1 on vcpu_load(), and saves and restores the register value for the host on vcpu_load() and vcpu_put(). If the value of those bits are cleared on a pCPU with a vCPU loaded (armv8pmu_start() would do that when PMU counters are programmed for the guest), PMU access from the guest EL0 might be trapped to the guest EL1 directly regardless of the current PMUSERENR_EL0 value of the vCPU. Fix this by not letting armv8pmu_start() overwrite PMUSERENR_EL0 on the pCPU where PMUSERENR_EL0 for the guest is loaded, and instead updating the saved shadow register value for the host so that the value can be restored on vcpu_put() later. While vcpu_{put,load}() are manipulating PMUSERENR_EL0, disable IRQs to prevent a race condition between these processes and IPIs that attempt to update PMUSERENR_EL0 for the host EL0. Suggested-by:Mark Rutland <mark.rutland@arm.com> Suggested-by:
Reiji Watanabe <reijiw@google.com> Signed-off-by:
-
Reiji Watanabe authored
Restore the host's PMUSERENR_EL0 value instead of clearing it, before returning back to userspace, as the host's EL0 might have a direct access to PMU registers (some bits of PMUSERENR_EL0 for might not be zero for the host EL0). Fixes: 83a7a4d6 ("arm64: perf: Enable PMU counter userspace access for perf event") Signed-off-by:
-
- 31 May, 2023 3 commits
-
-
Oliver Upton authored
KVM maintains a mask of supported CPUs when a vPMU type is explicitly selected by userspace and is used to reject any attempt to run the vCPU on an unsupported CPU. This is great, but we're still beholden to the default behavior where vCPUs can be scheduled anywhere and guest counters may silently stop working. Avoid confusing the next poor sod to look at this code and document the intended behavior. Signed-off-by:
Oliver Upton <oliver.upton@linux.dev> Signed-off-by:
-
Oliver Upton authored
To date KVM has relied on using a perf event to probe the core PMU at the time of vPMU initialization. Behind the scenes perf_event_init() would iteratively walk the PMUs of the system and return the PMU that could handle the event. However, an upcoming change in perf core will drop the iterative walk, thereby breaking the fragile dance we do on the KVM side. Avoid the problem altogether by iterating over the list of supported PMUs maintained in KVM, returning the core PMU that matches the CPU we were called on. Tested-by:
-
Oliver Upton authored
The reference count on page table allocations is increased for every 'counted' PTE (valid or donated) in the table in addition to the initial reference from ->zalloc_page(). kvm_pgtable_stage2_free_removed() fails to drop the last reference on the root of the table walk, meaning we leak memory. Fix it by dropping the last reference after the free walker returns, at which point all references for 'counted' PTEs have been released. Cc: stable@vger.kernel.org Fixes: 5c359cca ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make") Reported-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
-
- 30 May, 2023 1 commit
-
-
Akihiko Odaki authored
When handling ESR_ELx_EC_WATCHPT_LOW, far_el2 member of struct kvm_vcpu_fault_info will be copied to far member of struct kvm_debug_exit_arch and exposed to the userspace. The userspace will see stale values from older faults if the fault info does not get populated. Fixes: 8fb20461 ("KVM: arm64: Move early handlers to per-EC handlers") Suggested-by:
Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by:
-
- 24 May, 2023 3 commits
-
-
Fuad Tabba authored
The preorder callback on the kvm_pgtable_stage2_map() path can replace a table with a block, then recursively free the detached table. The higher-level walking logic stashes the old page table entry and then walks the freed table, invoking the leaf callback and potentially freeing pgtable pages prematurely. In normal operation, the call to tear down the detached stage-2 is indirected and uses an RCU callback to trigger the freeing. RCU is not available to pKVM, which is where this bug is triggered. Change the behavior of the walker to reload the page table entry after invoking the walker callback on preorder traversal, as it does for leaf entries. Tested on Pixel 6. Fixes: 5c359cca ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make") Suggested-by:
Fuad Tabba <tabba@google.com> Signed-off-by:
-
Marc Zyngier authored
We appear to have missed the Set/Way CMOs when adding MTE support. Not that we really expect anyone to use them, but you never know what stupidity some people can come up with... Treat these mostly like we deal with the classic S/W CMOs, only with an additional check that MTE really is enabled. Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
Steven Price <steven.price@arm.com> Reviewed-by:
-
Marc Zyngier authored
Add the missing Set/Way CMOs that apply to tagged memory. Signed-off-by:
-
- 19 May, 2023 5 commits
-
-
Will Deacon authored
Since host stage-2 mappings are created lazily, we cannot rely solely on the pte in order to recover the target physical address when checking a host-initiated memory transition as this permits donation of unmapped regions corresponding to MMIO or "no-map" memory. Instead of inspecting the pte, move the addr_is_allowed_memory() check into the host callback function where it is passed the physical address directly from the walker. Cc: Quentin Perret <qperret@google.com> Fixes: e82edcc7 ("KVM: arm64: Implement do_share() helper for sharing memory") Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Jean-Philippe Brucker authored
It is host userspace, not the guest, that issues KVM_DEV_ARM_VGIC_GRP_CTRL Signed-off-by:
Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by:
-
Jean-Philippe Brucker authored
It is now config_lock that must be held, not kvm lock. Replace the comment with a lockdep annotation. Fixes: f0032773 ("KVM: arm64: Use config_lock to protect vgic state") Signed-off-by:
-
Jean-Philippe Brucker authored
vgic_its_create() changes the vgic state without holding the config_lock, which triggers a lockdep warning in vgic_v4_init(): [ 358.667941] WARNING: CPU: 3 PID: 178 at arch/arm64/kvm/vgic/vgic-v4.c:245 vgic_v4_init+0x15c/0x7a8 ... [ 358.707410] vgic_v4_init+0x15c/0x7a8 [ 358.708550] vgic_its_create+0x37c/0x4a4 [ 358.709640] kvm_vm_ioctl+0x1518/0x2d80 [ 358.710688] __arm64_sys_ioctl+0x7ac/0x1ba8 [ 358.711960] invoke_syscall.constprop.0+0x70/0x1e0 [ 358.713245] do_el0_svc+0xe4/0x2d4 [ 358.714289] el0_svc+0x44/0x8c [ 358.715329] el0t_64_sync_handler+0xf4/0x120 [ 358.716615] el0t_64_sync+0x190/0x194 Wrap the whole of vgic_its_create() with config_lock since, in addition to calling vgic_v4_init(), it also modifies the global kvm->arch.vgic state. Fixes: f0032773 ("KVM: arm64: Use config_lock to protect vgic state") Signed-off-by:
-
Jean-Philippe Brucker authored
Lockdep reports a circular lock dependency between the srcu and the config_lock: [ 262.179917] -> #1 (&kvm->srcu){.+.+}-{0:0}: [ 262.182010] __synchronize_srcu+0xb0/0x224 [ 262.183422] synchronize_srcu_expedited+0x24/0x34 [ 262.184554] kvm_io_bus_register_dev+0x324/0x50c [ 262.185650] vgic_register_redist_iodev+0x254/0x398 [ 262.186740] vgic_v3_set_redist_base+0x3b0/0x724 [ 262.188087] kvm_vgic_addr+0x364/0x600 [ 262.189189] vgic_set_common_attr+0x90/0x544 [ 262.190278] vgic_v3_set_attr+0x74/0x9c [ 262.191432] kvm_device_ioctl+0x2a0/0x4e4 [ 262.192515] __arm64_sys_ioctl+0x7ac/0x1ba8 [ 262.193612] invoke_syscall.constprop.0+0x70/0x1e0 [ 262.195006] do_el0_svc+0xe4/0x2d4 [ 262.195929] el0_svc+0x44/0x8c [ 262.196917] el0t_64_sync_handler+0xf4/0x120 [ 262.198238] el0t_64_sync+0x190/0x194 [ 262.199224] [ 262.199224] -> #0 (&kvm->arch.config_lock){+.+.}-{3:3}: [ 262.201094] __lock_acquire+0x2b70/0x626c [ 262.202245] lock_acquire+0x454/0x778 [ 262.203132] __mutex_lock+0x190/0x8b4 [ 262.204023] mutex_lock_nested+0x24/0x30 [ 262.205100] vgic_mmio_write_v3_misc+0x5c/0x2a0 [ 262.206178] dispatch_mmio_write+0xd8/0x258 [ 262.207498] __kvm_io_bus_write+0x1e0/0x350 [ 262.208582] kvm_io_bus_write+0xe0/0x1cc [ 262.209653] io_mem_abort+0x2ac/0x6d8 [ 262.210569] kvm_handle_guest_abort+0x9b8/0x1f88 [ 262.211937] handle_exit+0xc4/0x39c [ 262.212971] kvm_arch_vcpu_ioctl_run+0x90c/0x1c04 [ 262.214154] kvm_vcpu_ioctl+0x450/0x12f8 [ 262.215233] __arm64_sys_ioctl+0x7ac/0x1ba8 [ 262.216402] invoke_syscall.constprop.0+0x70/0x1e0 [ 262.217774] do_el0_svc+0xe4/0x2d4 [ 262.218758] el0_svc+0x44/0x8c [ 262.219941] el0t_64_sync_handler+0xf4/0x120 [ 262.221110] el0t_64_sync+0x190/0x194 Note that the current report, which can be triggered by the vgic_irq kselftest, is a triple chain that includes slots_lock, but after inverting the slots_lock/config_lock dependency, the actual problem reported above remains. In several places, the vgic code calls kvm_io_bus_register_dev(), which synchronizes the srcu, while holding config_lock (#1). And the MMIO handler takes the config_lock while holding the srcu read lock (#0). Break dependency #1, by registering the distributor and redistributors without holding config_lock. The ITS also uses kvm_io_bus_register_dev() but already relies on slots_lock to serialize calls. The distributor iodev is created on the first KVM_RUN call. Multiple threads will race for vgic initialization, and only the first one will see !vgic_ready() under the lock. To serialize those threads, rely on slots_lock rather than config_lock. Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR ioctls and vCPU creation. Similarly, serialize the iodev creation with slots_lock, and the rest with config_lock. Fixes: f0032773 ("KVM: arm64: Use config_lock to protect vgic state") Signed-off-by:
-
- 11 May, 2023 3 commits
-
-
Marc Zyngier authored
* kvm-arm64/pgtable-fixes-6.4: : . : Fixes for concurrent S2 mapping race from Oliver: : : "So it appears that there is a race between two parallel stage-2 map : walkers that could lead to mapping the incorrect PA for a given IPA, as : the IPA -> PA relationship picks up an unintended offset. This series : eliminates the problem by using the current IPA of the walk as the : source-of-truth regarding where we are in a map operation." : . KVM: arm64: Constify start/end/phys fields of the pgtable walker data KVM: arm64: Infer PA offset from VA in hyp map walker KVM: arm64: Infer the PA offset from IPA in stage-2 map walker Signed-off-by: -
Marc Zyngier authored
* kvm-arm64/misc-6.4: : . : Minor changes for 6.4: : : - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) : : - FP/SVE/SME documentation update, in the hope that this field : becomes clearer... : : - Add workaround for the usual Apple SEIS brokenness : : - Random comment fixes : . KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations KVM: arm64: Clarify host SME state management KVM: arm64: Restructure check for SVE support in FP trap handler KVM: arm64: Document check for TIF_FOREIGN_FPSTATE KVM: arm64: Fix repeated words in comments KVM: arm64: Use the bitmap API to allocate bitmaps KVM: arm64: Slightly optimize flush_context() Signed-off-by: -
Marc Zyngier authored
Unsurprisingly, the M2 PRO is also affected by the SEIS bug, so add it to the naughty list. And since M2 MAX is likely to be of the same ilk, flag it as well. Tested on a M2 PRO mini machine. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20230501182141.39770-1-maz@kernel.org
-
- 07 May, 2023 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate" -
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
-
- 06 May, 2023 14 commits
-
-
Arnaldo Carvalho de Melo authored
This reverts commit a980755b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
This reverts commit 51924ae6. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c ("dmapool: create/destroy cleanup"). [ The whole old series: def85743..2d55c16c results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two pertain to merge window changes" * tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: afs: fix the afs_dir_get_folio return value nilfs2: do not write dirty data after degenerating to read-only mm: do not reclaim private data from pinned page nilfs2: fix infinite loop in nilfs_mdt_get_block() mm/mmap/vma_merge: always check invariants
-
Keith Busch authored
The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [kbusch@kernel.org: push new blocks in ascending order] Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Keith Busch authored
If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Keith Busch authored
The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Keith Busch authored
Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Keith Busch authored
Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Keith Busch authored
Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Tony Battersby authored
Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
-
Tony Battersby authored
To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Tony Battersby authored
Use sysfs_emit instead of scnprintf, snprintf or sprintf. Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
Tony Battersby authored
dmapool originally tried to support pools without a device because dma_alloc_coherent() supports allocations without a device. But nobody ended up using dma pools without a device, and trying to do so will result in an oops. So remove the checks for pool->dev == NULL since they are unneeded bloat. [kbusch@kernel.org: add check for null dev on create] Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
-
