- 20 Jul, 2012 31 commits
-
-
Vikas Chaudhary authored
Allow multi-session to target (for flash ddbs) accesible via multiple network portal Signed-off-by:
Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com>
-
Rob Evers authored
Currently the backoff algorithm for when to retry alua rtpg requests progresses geometrically as so: 2, 4, 8, 16, 32, 64... seconds. This progression can lead to un-needed delay in retrying alua rtpg requests when the rtpgs are delayed. A less aggressive backoff algorithm that is additive would not lead to such large jumps when delays start getting long, but would backoff linearly: 2, 4, 6, 8, 10... seconds. Signed-off-by:
Martin George <marting@netapp.com> Signed-off-by:
Rob Evers <revers@redhat.com> Reviewed-by:
Babu Moger <babu.moger@netapp.com> Signed-off-by:
-
Rob Evers authored
Some storage arrays are known to return 'illegal request' when an rtpg extended header request is made. T10 says the array should ignore the bit, and return the non-extended rtpg as the array doesn't support the request. Working around this by retrying the rtpg request without the extended header bit set when the extended rtpg request results in illegal request. Signed-off-by:
-
Rob Evers authored
During alua transitions, an array can return transitioning status in response to rtpg requests. These requests get retried for a maximum of 60 seconds by default before timing out. Sometimes this timeout isn't sufficient to allow the array to complete the transition. T10-spc4 addresses this under 'Report Target Port Groups' command. This update retrieves the timeout value from the storage array if available and retries the transitioning rtpgs for up to the 'implied transitioning timeout' value Signed-off-by:
-
Dan Carpenter authored
ARCMSR_ARC1880_DiagWrite_ENABLE is 0x00000080 so (x | 0x00000080) is never zero. The intent here was to test that loop until ARCMSR_ARC1880_DiagWrite_ENABLE was turned on, but because the test was wrong, we would do five loops regardless of whether it succeed or not. Also I simplified the condition a little by removing the unused assignement. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
HighPoint Linux Team authored
As the limitation of RR312x's dma engine, the HBA can not access host memory over 12GB. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=14311 [alan: resurrected bug from 2009 and pushed upstream] Reported-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Fix System Panic During IO Test using Medusa tool Signed-off-by:
-
James Smart authored
Fix fcp_imax module parameter to dynamically change FCP EQ delay multiplier Signed-off-by:
-
James Smart authored
Signed-off-by:
-
James Smart authored
Fixed system held-up when performing resource provsion through same PCI function Signed-off-by:
-
James Smart authored
Fix system hang due to bad protection module parameters (CR: 130769) Signed-off-by:
-
James Smart authored
Fixed debug helper routine failed to dump CQ and EQ entries in non-MSI-X mode Signed-off-by:
-
James Smart authored
This patch corrects the issue caught via Smatch and reported by Dan Carpenter: http://marc.info/?l=linux-scsi&m=133693516103343 Resolve null pointer check ordering that were odd Reported-by:
-
James Smart authored
Incorporate patch originally supplied by Julia Lawall <Julia.Lawall@lip6.fr> http://marc.info/?l=linux-scsi&m=133572879711140&w=2 "It appears that mempool_free should be performed on these failures as on the other exists from the containing functions." Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
-
Bhanu Prakash Gollapudi authored
Signed-off-by:
Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by:
-
Bhanu Prakash Gollapudi authored
Use list_for_each_entry_safe() instead of explicit cast to avoid relying on struct layout Signed-off-by:
-
Bhanu Prakash Gollapudi authored
During parity errors, the ramrods are not issued to FW. bnx2fc waits for the timeout value, and proceeds with cleaning up the IOs. Since we are already out-of-sync with FW, cleanup commands timeout too, and do not get the completion. This operation takes 36 secs for each session to upload causing huge delays. To fix this, bnx2fc now gets a PARITY_ERROR from cnic driver, and upon failure, the driver does not issue any commands to the FW and finishes the upload process sooner. Signed-off-by:
-
Mike Christie authored
We do not hold the host lock when calling these functions, so remove comment. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
This has scsi_internal_device_unblock/scsi_target_unblock take the new state to set the devices as an argument instead of always setting to running. The patch also converts users of these functions. This allows the FC and iSCSI class to transition devices from blocked to transport-offline, so that when fast_io_fail/replacement_timeout has fired we do not set the devices back to running. Instead, we set them to SDEV_TRANSPORT_OFFLINE. Signed-off-by:
-
Mike Christie authored
This patch adds a new state SDEV_TRANSPORT_OFFLINE. It will be used by transport classes to offline devices for cases like when the fast_io_fail/recovery_tmo fires. In those cases we want all IO to fail, and we have not yet escalated to dev_loss_tmo behavior where we are removing the devices. Currently to handle this state, transport classes are setting the scsi_device's state to running, setting their internal session/port structs state to something that indicates failed, and then failing IO from some transport check in the queuecommand. The reason for the new value is so that users can distinguish between a device failure that is a result of a transport problem vs the wide range of errors that devices get offlined for when a scsi command times out and we offline the devices there. It also fixes the confusion as to why the transport class is failing IO, but has set the device state from blocked to running. Signed-off-by:
-
Mark Rustad authored
Recent changes to add fcoe_sysfs caused libfcoe_init to call fcoe_transport_exit in a module initialization routine. The change resulted in the below error. This patch removes the __exit keyword from the fcoe_transport_exit definition such that it may be called from an __init routine. WARNING: drivers/scsi/fcoe/libfcoe.o(.init.text+0x21): Section mismatch in reference from the function init_module() to the function .exit.text:fcoe_transp exit() The function __init init_module() references a function __exit fcoe_transport_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of fcoe_transport_exit() so it may be used outside an exit section. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Bhanu Prakash Gollapudi authored
bnx2fc had an assumption that the fcoe interface will always start on the vlan dev. However, some switch implementations (Eg., HP virtual connect FlexFabric) expects the fcoe interface to be started on physical interface. Do not error out if the netdev is not a vlan dev. Signed-off-by:
-
Joe Perches authored
Deduplication of formats and consolidating tests makes the object much smaller. Add bnx2fc_debug.c, add functions for a few logging functions (BNX2FC_IO_DBG, BNX2FC_TGT_DBG, BNX2FC_HBA_DBG). Use printf extension %pV. Add and use pr_fmt and pr_<level>. Move the debug #include below structure definitions. $ size drivers/scsi/bnx2fc/built-in.o* text data bss dec hex filename 101563 1165 24976 127704 1f2d8 drivers/scsi/bnx2fc/built-in.o.new 138473 1109 33400 172982 2a3b6 drivers/scsi/bnx2fc/built-in.o.old Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Eric Dumazet authored
Since bnx2fc_percpu_thread_create() creates percpu kthread, it makes sense to use kthread_create_on_node() to get proper NUMA affinity for kthread stack. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
James Bottomley authored
scsi_wait_scan was introduced with asynchronous host scanning as a hack for distributions that weren't using proper udev based wait for root to appear in their initramfs scripts. In 2.6.30 Commit c7510859 Author: Rafael J. Wysocki <rjw@sisk.pl> Date: Sun Apr 12 20:06:56 2009 +0200 PM/Hibernate: Wait for SCSI devices scan to complete during resume Actually broke scsi_wait_scan because it renders scsi_complete_async_scans() a nop for modular SCSI if you include scsi_scans.h (which this module does). The lack of bug reports is sufficient proof that this module is no longer used. Cc: Jeff Mahoney <jeffm@suse.de> Cc: Dave Jones <davej@redhat.com> Cc: maximilian attems <max@stro.at> Signed-off-by:
-
Vasu Dev authored
Updates newly added stats from fc_get_host_stats, added new function fc_exch_update_stats to update exches related stats from fc_exch.c by going thru internal ema_list elements. Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Acked-by : Robert Love <robert.w.love@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
-
Vasu Dev authored
Adds stats to track FCP pkt and frame alloc failure. Signed-off-by:
-
Vasu Dev authored
The libfc is used by fcoe but fcoe agnostic, and therefore should not have any fcoe references. So renaming fcoe_dev_stats from libfc as its for fc_stats. After that libfc is fcoe string free except some strings for Open-FCoE.org. Signed-off-by:
-
Vasu Dev authored
The libfc provides more flexibility and with that we can monitor some more FC specific stats for FC exches or FCP error cases, this patch add such new FC stats. The patch adds *only* FC specific new stats to existing fc_host attribute container. Added stats names are self explanatory as existing FC stats already has, however anyway still added commentary along their definition to describe them. Signed-off-by:
-
- 19 Jul, 2012 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull last minute Ceph fixes from Sage Weil: "The important one fixes a bug in the socket failure handling behavior that was turned up in some recent failure injection testing. The other two are minor bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: endian bug in rbd_req_cb() rbd: Fix ceph_snap_context size calculation libceph: fix messenger retry
-
git://neil.brown.name/mdLinus Torvalds authored
Pull three md bugfixes from NeilBrown: "One of the bugs was introduced in 3.5-rc1. Others have been there for longer." * tag 'md-3.5-fixes' of git://neil.brown.name/md: md/raid1: close some possible races on write errors during resync md: avoid crash when stopping md array races with closing other open fds. md: fix bug in handling of new_data_offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "Ok, we should be good to go now" 1) We have to statically initialize the init_net device list head rather than do so in an initcall, otherwise netprio_cgroup crashes if it's built statically rather than modular (Mark D. Rustad) 2) Fix SKB null oopser in CIPSO ipv4 option processing (Paul Moore) 3) Qlogic maintainers update (Anirban Chakraborty) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Statically initialize init_net.dev_base_head MAINTAINERS: Changes in qlcnic and qlge maintainers list cipso: don't follow a NULL pointer when setsockopt() is called
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID update from Jiri Kosina: "A final round of changes for HID for 3.5: just device ID additions." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hid-multitouch: add support for Zytronic panels HID: add Sennheiser BTD500USB device support HID: add battery quirk for Apple Wireless ANSI
-
Ezequiel Garcia authored
The strcpy was being used to set the name of the board. Since the destination char* was read-only and the name is set statically at compile time; this was both wrong and redundant. The type of char* is changed to const char* to prevent future errors. Reported-by:
Radek Masin <radek@masin.eu> Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> [ Taking directly due to vacations - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Benjamin Tissoires authored
Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
NeilBrown authored
commit 4367af55 md/raid1: clear bad-block record when write succeeds. Added a 'reschedule_retry' call possibility at the end of end_sync_write, but didn't add matching code at the end of sync_request_write. So if the writes complete very quickly, or scheduling makes it seem that way, then we can miss rescheduling the request and the resync could hang. Also commit 73d5c38a md: avoid races when stopping resync. Fix a race condition in this same code in end_sync_write but didn't make the change in sync_request_write. This patch updates sync_request_write to fix both of those. Patch is suitable for 3.1 and later kernels. Reported-by:
Alexander Lyakas <alex.bolshoy@gmail.com> Original-version-by:
NeilBrown <neilb@suse.de>
-
NeilBrown authored
md will refuse to stop an array if any other fd (or mounted fs) is using it. When any fs is unmounted of when the last open fd is closed all pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put) so there will be no pending IO to worry about when the array is stopped. However in order to send the STOP_ARRAY ioctl to stop the array one must first get and open fd on the block device. If some fd is being used to write to the block device and it is closed after mdadm open the block device, but before mdadm issues the STOP_ARRAY ioctl, then there will be no last-close on the md device so __blkdev_put will not call sync_blockdev. If this happens, then IO can still be in-flight while md tears down the array and bad things can happen (use-after-free and subsequent havoc). So in the case where do_md_stop is being called from an open file descriptor, call sync_block after taking the mutex to ensure there will be no new openers. This is needed when setting a read-write device to read-only too. Cc: stable@vger.kernel.org Reported-by:
majianpeng <majianpeng@gmail.com> Signed-off-by:
-
NeilBrown authored
commit c6563a8c md: add possibility to change data-offset for devices. introduced a 'new_data_offset' attribute which should normally be the same as 'data_offset', but can be explicitly set to a different value to allow a reshape operation to move the data. Unfortunately when the 'data_offset' is explicitly set through sysfs, the new_data_offset is not also set, so the two would become out-of-sync incorrectly. One result of this is that trying to set the 'size' after the 'data_offset' would fail because it is not permitted to set the size when the 'data_offset' and 'new_data_offset' are different - as that can be confusing. Consequently when mdadm tried to do this while assembling an IMSM array it would fail. This bug was introduced in 3.5-rc1. Reported-by:
Brian Downing <bdowning@lavos.net> Bisected-by:
-
