- 30 Nov, 2022 37 commits
-
-
Muchun Song authored
The ->lru field will be assigned to a new value in __free_page(). So it is unnecessary to delete it from the @list. Just remove it to simplify the code. Link: https://lkml.kernel.org/r/20221027033641.66709-1-songmuchun@bytedance.comSigned-off-by:
Muchun Song <songmuchun@bytedance.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Tony Luck authored
Cannot call memory_failure() directly from the fault handler because mmap_lock (and others) are held. It is important, but not urgent, to mark the source page as h/w poisoned and unmap it from other tasks. Use memory_failure_queue() to request a call to memory_failure() for the page with the error. Also provide a stub version for CONFIG_MEMORY_FAILURE=n Link: https://lkml.kernel.org/r/20221021200120.175753-3-tony.luck@intel.comSigned-off-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by:
-
Tony Luck authored
Patch series "Copy-on-write poison recovery", v3. Part 1 deals with the process that triggered the copy on write fault with a store to a shared read-only page. That process is send a SIGBUS with the usual machine check decoration to specify the virtual address of the lost page, together with the scope. Part 2 sets up to asynchronously take the page with the uncorrected error offline to prevent additional machine check faults. H/t to Miaohe Lin <linmiaohe@huawei.com> and Shuai Xue <xueshuai@linux.alibaba.com> for pointing me to the existing function to queue a call to memory_failure(). On x86 there is some duplicate reporting (because the error is also signalled by the memory controller as well as by the core that triggered the machine check). Console logs look like this: This patch (of 2): If the kernel is copying a page as the result of a copy-on-write fault and runs into an uncorrectable error, Linux will crash because it does not have recovery code for this case where poison is consumed by the kernel. It is easy to set up a test case. Just inject an error into a private page, fork(2), and have the child process write to the page. I wrapped that neatly into a test at: git://git.kernel.org/pub/scm/linux/kernel/git/aegl/ras-tools.git just enable ACPI error injection and run: # ./einj_mem-uc -f copy-on-write Add a new copy_user_highpage_mc() function that uses copy_mc_to_kernel() on architectures where that is available (currently x86 and powerpc). When an error is detected during the page copy, return VM_FAULT_HWPOISON to caller of wp_page_copy(). This propagates up the call stack. Both x86 and powerpc have code in their fault handler to deal with this code by sending a SIGBUS to the application. Note that this patch avoids a system crash and signals the process that triggered the copy-on-write action. It does not take any action for the memory error that is still in the shared page. To handle that a call to memory_failure() is needed. But this cannot be done from wp_page_copy() because it holds mmap_lock(). Perhaps the architecture fault handlers can deal with this loose end in a subsequent patch? On Intel/x86 this loose end will often be handled automatically because the memory controller provides an additional notification of the h/w poison in memory, the handler for this will call memory_failure(). This isn't a 100% solution. If there are multiple errors, not all may be logged in this way. [tony.luck@intel.com: add call to kmsan_unpoison_memory(), per Miaohe Lin] Link: https://lkml.kernel.org/r/20221031201029.102123-2-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-1-tony.luck@intel.com Link: https://lkml.kernel.org/r/20221021200120.175753-2-tony.luck@intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Tested-by:
Shuai Xue <xueshuai@linux.alibaba.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Shakeel Butt authored
The percpu_counter is used for scenarios where performance is more important than the accuracy. For percpu_counter users, who want more accurate information in their slowpath, percpu_counter_sum is provided which traverses all the online CPUs to accumulate the data. The reason it only needs to traverse online CPUs is because percpu_counter does implement CPU offline callback which syncs the local data of the offlined CPU. However there is a small race window between the online CPUs traversal of percpu_counter_sum and the CPU offline callback. The offline callback has to traverse all the percpu_counters on the system to flush the CPU local data which can be a lot. During that time, the CPU which is going offline has already been published as offline to all the readers. So, as the offline callback is running, percpu_counter_sum can be called for one counter which has some state on the CPU going offline. Since percpu_counter_sum only traverses online CPUs, it will skip that specific CPU and the offline callback might not have flushed the state for that specific percpu_counter on that offlined CPU. Normally this is not an issue because percpu_counter users can deal with some inaccuracy for small time window. However a new user i.e. mm_struct on the cleanup path wants to check the exact state of the percpu_counter through check_mm(). For such users, this patch introduces percpu_counter_sum_all() which traverses all possible CPUs and it is used in fork.c:check_mm() to avoid the potential race. This issue is exposed by the later patch "mm: convert mm's rss stats into percpu_counter". Link: https://lkml.kernel.org/r/20221109012011.881058-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
-
Shakeel Butt authored
Currently mm_struct maintains rss_stats which are updated on page fault and the unmapping codepaths. For page fault codepath the updates are cached per thread with the batch of TASK_RSS_EVENTS_THRESH which is 64. The reason for caching is performance for multithreaded applications otherwise the rss_stats updates may become hotspot for such applications. However this optimization comes with the cost of error margin in the rss stats. The rss_stats for applications with large number of threads can be very skewed. At worst the error margin is (nr_threads * 64) and we have a lot of applications with 100s of threads, so the error margin can be very high. Internally we had to reduce TASK_RSS_EVENTS_THRESH to 32. Recently we started seeing the unbounded errors for rss_stats for specific applications which use TCP rx0cp. It seems like vm_insert_pages() codepath does not sync rss_stats at all. This patch converts the rss_stats into percpu_counter to convert the error margin from (nr_threads * 64) to approximately (nr_cpus ^ 2). However this conversion enable us to get the accurate stats for situations where accuracy is more important than the cpu cost. This patch does not make such tradeoffs - we can just use percpu_counter_add_local() for the updates and percpu_counter_sum() (or percpu_counter_sync() + percpu_counter_read) for the readers. At the moment the readers are either procfs interface, oom_killer and memory reclaim which I think are not performance critical and should be ok with slow read. However I think we can make that change in a separate patch. Link: https://lkml.kernel.org/r/20221024052841.3291983-1-shakeelb@google.comSigned-off-by:
-
SeongJae Park authored
Add simple test cases for DAMON_LRU_SORT's 'enabled' parameter. Those tests are focusing on the synchronous behavior of DAMON_RECLAIM enabling and disabling. Link: https://lkml.kernel.org/r/20221025173650.90624-5-sj@kernel.orgSigned-off-by:
SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
SeongJae Park authored
Writing a value to DAMON_RECLAIM's 'enabled' parameter turns on or off DAMON in an ansychronous way. This means the parameter cannot be used to read the current status of DAMON_RECLAIM. 'kdamond_pid' parameter should be used instead for the purpose. The documentation is easy to be read as it works in a synchronous way, so it is a little bit confusing. It also makes the user space tooling dirty. There's no real reason to have the asynchronous behavior, though. Simply make the parameter works synchronously, rather than updating the document. Link: https://lkml.kernel.org/r/20221025173650.90624-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Add simple test cases for DAMON_RECLAIM's 'enabled' parameter. Those tests are focusing on the synchronous behavior of DAMON_RECLAIM enabling and disabling. Link: https://lkml.kernel.org/r/20221025173650.90624-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "mm/damon/reclaim,lru_sort: enable/disable synchronously". Writing a value to DAMON_RECLAIM and DAMON_LRU_SORT's 'enabled' parameters turns on or off DAMON in an ansychronous way. This means the parameter cannot be used to read the current status of them. 'kdamond_pid' parameter should be used instead for the purpose. The documentation is easy to be read as it works in a synchronous way, so it is a little bit confusing. It also makes the user space tooling dirty. There's no real reason to have the asynchronous behavior, though. Simply make the parameter works synchronously, rather than updating the document. The first and second patches changes the behavior of the 'enabled' parameter for DAMON_RECLAIM and adds a selftest for the changed behavior, respectively. Following two patches make the same changes for DAMON_LRU_SORT. This patch (of 4): Writing a value to DAMON_RECLAIM's 'enabled' parameter turns on or off DAMON in an ansychronous way. This means the parameter cannot be used to read the current status of DAMON_RECLAIM. 'kdamond_pid' parameter should be used instead for the purpose. The documentation is easy to be read as it works in a synchronous way, so it is a little bit confusing. It also makes the user space tooling dirty. There's no real reason to have the asynchronous behavior, though. Simply make the parameter works synchronously, rather than updating the document. Link: https://lkml.kernel.org/r/20221025173650.90624-1-sj@kernel.org Link: https://lkml.kernel.org/r/20221025173650.90624-2-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Some headers that 'reclaim.c' and 'lru_sort.c' are including are unnecessary now owing to previous cleanups and refactorings. Remove those. Link: https://lkml.kernel.org/r/20221026225943.100429-13-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMON_RECLAIM and DAMON_LRU_SORT has duplicated code for DAMON context and target initializations. Deduplicate the part by implementing a function for the initialization in 'modules-common.c' and using it. Link: https://lkml.kernel.org/r/20221026225943.100429-12-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMON sysfs interface for 'schemes' directory is implemented using about one thousand lines of code. It has no strong dependency with other parts of its file, so split it out to another file for better code management. Link: https://lkml.kernel.org/r/20221026225943.100429-11-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
'damon_sysfs_schemes_update_stats()' is coupled with both damon_sysfs_kdamond and damon_sysfs_schemes. It's a wide range of types dependency. It makes splitting the logics a little bit distracting. Split the function so that each function is coupled with smaller range of types. Link: https://lkml.kernel.org/r/20221026225943.100429-10-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
The implementation of unsigned long type range directories can be reused by multiple DAMON sysfs directories including those for DAMON-based Operation Schemes and the range of number of monitoring regions. Move the code into the files for DAMON sysfs common logics. Link: https://lkml.kernel.org/r/20221026225943.100429-9-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMON sysfs interface is implemented in a single file, sysfs.c, which has about 2,800 lines of code. As the interface is hierarchical and some of the code can be reused by different hierarchies, it would make more sense to split out the implementation into common parts and different parts in multiple files. As the beginning of the work, create files for common code and move the global mutex for directories modifications protection into the new file. Link: https://lkml.kernel.org/r/20221026225943.100429-8-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
'damon_sysfs_region_alloc()' is always called with zero-filled 'struct damon_addr_range', because the start and end addresses should set by users. Remove unnecessary parameters of the function and simplify the body by using 'kzalloc()'. Link: https://lkml.kernel.org/r/20221026225943.100429-7-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMON has a struct for each address range but DAMON sysfs interface is using the low type (unsigned long) for storing the start and end addresses of regions. Use the dedicated struct for better type safety. Link: https://lkml.kernel.org/r/20221026225943.100429-6-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
DAMOS quota adjustment logic in 'kdamond_apply_schemes()', has some amount of code, and the logic is not so straightforward. Split it out to a new function for better readability. Link: https://lkml.kernel.org/r/20221026225943.100429-5-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
The function for applying a given DAMON scheme action to a given DAMON region, 'damos_apply_scheme()' is not quite short. Make it better to read by splitting out the stat update logic into a new function. Link: https://lkml.kernel.org/r/20221026225943.100429-4-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
The DAMOS action applying function, 'damon_do_apply_schemes()', is still long and not easy to read. Split out the code for applying a single action to a single region into a new function for better readability. Link: https://lkml.kernel.org/r/20221026225943.100429-3-sj@kernel.orgSigned-off-by:
-
SeongJae Park authored
Patch series "mm/damon: cleanup and refactoring code", v2. This patchset cleans up and refactors a range of DAMON code including the core, DAMON sysfs interface, and DAMON modules, for better readability and convenient future feature implementations. In detail, this patchset splits unnecessarily long and complex functions in core into smaller functions (patches 1-4). Then, it cleans up the DAMON sysfs interface by using more type-safe code (patch 5) and removing unnecessary function parameters (patch 6). Further, it refactor the code by distributing the code into multiple files (patches 7-10). Last two patches (patches 11 and 12) deduplicates and remove unnecessary header inclusion in DAMON modules (reclaim and lru_sort). This patch (of 12): The DAMOS action applying function, 'damon_do_apply_schemes()', is quite long and not so simple. Split out the already quota-charged region skip code, which is not a small amount of simple code, into a new function with some comments for better readability. Link: https://lkml.kernel.org/r/20221026225943.100429-1-sj@kernel.org Link: https://lkml.kernel.org/r/20221026225943.100429-2-sj@kernel.orgSigned-off-by:
-
Andrew Morton authored
-
Andrew Morton authored
It causes build failures with unusual CC/HOSTCC combinations. Quoting https://lkml.kernel.org/r/A222B1E6-69B8-4085-AD1B-27BDB72CA971@goldelico.com: HOSTCC scripts/mod/modpost.o - due to target missing In file included from include/linux/string.h:5, from scripts/mod/../../include/linux/license.h:5, from scripts/mod/modpost.c:24: include/linux/compiler.h:246:10: fatal error: asm/rwonce.h: No such file or directory 246 | #include <asm/rwonce.h> | ^~~~~~~~~~~~~~ compilation terminated. ... The problem is that HOSTCC is not necessarily the same compiler or even architecture as CC and pulling in <linux/compiler.h> or <asm/rwonce.h> files indirectly isn't a good idea then. My toolchain is providing HOSTCC = gcc (MacPorts) and CC = arm-linux-gnueabihf (built from gcc source) and all running on Darwin. If I change the include to <string.h> I can then "HOSTCC scripts/mod/modpost.c" but then it fails for "CC kernel/module/main.c" not finding <string.h>: CC kernel/module/main.o - due to target missing In file included from kernel/module/main.c:43:0: ./include/linux/license.h:5:20: fatal error: string.h: No such file or directory #include <string.h> ^ compilation terminated. Reported-by:
"H. Nikolaus Schaller" <hns@goldelico.com> Cc: Sam James <sam@gentoo.org> Signed-off-by:
-
Lee Jones authored
When enabled, KASAN enlarges function's stack-frames. Pushing quite a few over the current threshold. This can mainly be seen on 32-bit architectures where the present limit (when !GCC) is a lowly 1024-Bytes. Link: https://lkml.kernel.org/r/20221125120750.3537134-3-lee@kernel.orgSigned-off-by:
Lee Jones <lee@kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Tom Rix <trix@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Lee Jones authored
Patch series "Fix a bunch of allmodconfig errors", v2. Since b339ec9c ("kbuild: Only default to -Werror if COMPILE_TEST") WERROR now defaults to COMPILE_TEST meaning that it's enabled for allmodconfig builds. This leads to some interesting build failures when using Clang, each resolved in this set. With this set applied, I am able to obtain a successful allmodconfig Arm build. This patch (of 2): calculate_bandwidth() is presently broken on all !(X86_64 || SPARC64 || ARM64) architectures built with Clang (all released versions), whereby the stack frame gets blown up to well over 5k. This would cause an immediate kernel panic on most architectures. We'll revert this when the following bug report has been resolved: https://github.com/llvm/llvm-project/issues/41896. Link: https://lkml.kernel.org/r/20221125120750.3537134-1-lee@kernel.org Link: https://lkml.kernel.org/r/20221125120750.3537134-2-lee@kernel.orgSigned-off-by:
-
Jann Horn authored
Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f827 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables. Link: https://lkml.kernel.org/r/20221129154730.2274278-3-jannh@google.com Link: https://lkml.kernel.org/r/20221128180252.1684965-3-jannh@google.com Link: https://lkml.kernel.org/r/20221125213714.4115729-3-jannh@google.com Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Yang Shi <shy828301@gmail.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jann Horn authored
Since commit 70cbc3cc ("mm: gup: fix the fast GUP race against THP collapse"), the lockless_pages_from_mm() fastpath rechecks the pmd_t to ensure that the page table was not removed by khugepaged in between. However, lockless_pages_from_mm() still requires that the page table is not concurrently freed. Fix it by sending IPIs (if the architecture uses semi-RCU-style page table freeing) before freeing/reusing page tables. Link: https://lkml.kernel.org/r/20221129154730.2274278-2-jannh@google.com Link: https://lkml.kernel.org/r/20221128180252.1684965-2-jannh@google.com Link: https://lkml.kernel.org/r/20221125213714.4115729-2-jannh@google.com Fixes: ba76149f ("thp: khugepaged") Signed-off-by:
-
Jann Horn authored
pagetable walks on address ranges mapped by VMAs can be done under the mmap lock, the lock of an anon_vma attached to the VMA, or the lock of the VMA's address_space. Only one of these needs to be held, and it does not need to be held in exclusive mode. Under those circumstances, the rules for concurrent access to page table entries are: - Terminal page table entries (entries that don't point to another page table) can be arbitrarily changed under the page table lock, with the exception that they always need to be consistent for hardware page table walks and lockless_pages_from_mm(). This includes that they can be changed into non-terminal entries. - Non-terminal page table entries (which point to another page table) can not be modified; readers are allowed to READ_ONCE() an entry, verify that it is non-terminal, and then assume that its value will stay as-is. Retracting a page table involves modifying a non-terminal entry, so page-table-level locks are insufficient to protect against concurrent page table traversal; it requires taking all the higher-level locks under which it is possible to start a page walk in the relevant range in exclusive mode. The collapse_huge_page() path for anonymous THP already follows this rule, but the shmem/file THP path was getting it wrong, making it possible for concurrent rmap-based operations to cause corruption. Link: https://lkml.kernel.org/r/20221129154730.2274278-1-jannh@google.com Link: https://lkml.kernel.org/r/20221128180252.1684965-1-jannh@google.com Link: https://lkml.kernel.org/r/20221125213714.4115729-1-jannh@google.com Fixes: 27e1f827 ("khugepaged: enable collapse pmd for pte-mapped THP") Signed-off-by:
-
Gavin Shan authored
The issue is reported when removing memory through virtio_mem device. The transparent huge page, experienced copy-on-write fault, is wrongly regarded as pinned. The transparent huge page is escaped from being isolated in isolate_migratepages_block(). The transparent huge page can't be migrated and the corresponding memory block can't be put into offline state. Fix it by replacing page_mapcount() with total_mapcount(). With this, the transparent huge page can be isolated and migrated, and the memory block can be put into offline state. Besides, The page's refcount is increased a bit earlier to avoid the page is released when the check is executed. Link: https://lkml.kernel.org/r/20221124095523.31061-1-gshan@redhat.com Fixes: 1da2f328 ("mm,thp,compaction,cma: allow THP migration for CMA allocations") Signed-off-by:
Gavin Shan <gshan@redhat.com> Reported-by:
Zhenyu Zhang <zhenyzha@redhat.com> Tested-by:
-
Juergen Gross authored
When running as a Xen PV guests commit eed9a328 ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") can cause a protection violation in pmdp_test_and_clear_young(): BUG: unable to handle page fault for address: ffff8880083374d0 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 3026067 P4D 3026067 PUD 3027067 PMD 7fee5067 PTE 8010000008337065 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 158 Comm: kswapd0 Not tainted 6.1.0-rc5-20221118-doflr+ #1 RIP: e030:pmdp_test_and_clear_young+0x25/0x40 This happens because the Xen hypervisor can't emulate direct writes to page table entries other than PTEs. This can easily be fixed by introducing arch_has_hw_nonleaf_pmd_young() similar to arch_has_hw_pte_young() and test that instead of CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG. Link: https://lkml.kernel.org/r/20221123064510.16225-1-jgross@suse.com Fixes: eed9a328 ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") Signed-off-by:
Juergen Gross <jgross@suse.com> Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Acked-by:
Yu Zhao <yuzhao@google.com> Tested-by:
-
Juergen Gross authored
In order to avoid #ifdeffery add a dummy pmd_young() implementation as a fallback. This is required for the later patch "mm: introduce arch_has_hw_nonleaf_pmd_young()". Link: https://lkml.kernel.org/r/fd3ac3cd-7349-6bbd-890a-71a9454ca0b3@suse.comSigned-off-by:
-
SeongJae Park authored
Commit da878780 ("mm/damon/sysfs: support online inputs update") made 'damon_sysfs_set_schemes()' to be called for running DAMON context, which could have schemes. In the case, DAMON sysfs interface is supposed to update, remove, or add schemes to reflect the sysfs files. However, the code is assuming the DAMON context wouldn't have schemes at all, and therefore creates and adds new schemes. As a result, the code doesn't work as intended for online schemes tuning and could have more than expected memory footprint. The schemes are all in the DAMON context, so it doesn't leak the memory, though. Remove the wrong asssumption (the DAMON context wouldn't have schemes) in 'damon_sysfs_set_schemes()' to fix the bug. Link: https://lkml.kernel.org/r/20221122194831.3472-1-sj@kernel.org Fixes: da878780 ("mm/damon/sysfs: support online inputs update") Signed-off-by:
-
Tiezhu Yang authored
The latest version of grep claims the egrep is now obsolete so the build now contains warnings that look like: egrep: warning: egrep is obsolescent; using grep -E fix this up by moving the related file to use "grep -E" instead. sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm` Here are the steps to install the latest grep: wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz tar xf grep-3.8.tar.gz cd grep-3.8 && ./configure && make sudo make install export PATH=/usr/local/bin:$PATH Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
ZhangPeng authored
Syzbot reported a null-ptr-deref bug: NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 3603 Comm: segctord Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0 fs/nilfs2/alloc.c:608 Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7 RSP: 0018:ffffc90003dff830 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010 RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158 R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004 FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0 Call Trace: <TASK> nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline] nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193 nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236 nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940 nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline] nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline] nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088 nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337 nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568 nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018 nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline] nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045 nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline] nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> ... If DAT metadata file is corrupted on disk, there is a case where req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during a b-tree operation that cascadingly updates ancestor nodes of the b-tree, because nilfs_dat_commit_alloc() for a lower level block can initialize the blocknr on the same DAT entry between nilfs_dat_prepare_end() and nilfs_dat_commit_end(). If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free() without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and causes the NULL pointer dereference above in nilfs_palloc_commit_free_entry() function, which leads to a crash. Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free(). This also calls nilfs_error() in that case to notify that there is a fatal flaw in the filesystem metadata and prevent further operations. Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.comSigned-off-by:
ZhangPeng <zhangpeng362@huawei.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com Tested-by:
-
Mike Kravetz authored
madvise(MADV_DONTNEED) ends up calling zap_page_range() to clear page tables associated with the address range. For hugetlb vmas, zap_page_range will call __unmap_hugepage_range_final. However, __unmap_hugepage_range_final assumes the passed vma is about to be removed and deletes the vma_lock to prevent pmd sharing as the vma is on the way out. In the case of madvise(MADV_DONTNEED) the vma remains, but the missing vma_lock prevents pmd sharing and could potentially lead to issues with truncation/fault races. This issue was originally reported here [1] as a BUG triggered in page_try_dup_anon_rmap. Prior to the introduction of the hugetlb vma_lock, __unmap_hugepage_range_final cleared the VM_MAYSHARE flag to prevent pmd sharing. Subsequent faults on this vma were confused as VM_MAYSHARE indicates a sharable vma, but was not set so page_mapping was not set in new pages added to the page table. This resulted in pages that appeared anonymous in a VM_SHARED vma and triggered the BUG. Address issue by adding a new zap flag ZAP_FLAG_UNMAP to indicate an unmap call from unmap_vmas(). This is used to indicate the 'final' unmapping of a hugetlb vma. When called via MADV_DONTNEED, this flag is not set and the vm_lock is not deleted. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ Link: https://lkml.kernel.org/r/20221114235507.294320-3-mike.kravetz@oracle.com Fixes: 90e7e7f5 ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by:
Wei Chen <harperchen1110@gmail.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
This series addresses the issue first reported in [1], and fully described in patch 2. Patches 1 and 2 address the user visible issue and are tagged for stable backports. While exploring solutions to this issue, related problems with mmu notification calls were discovered. This is addressed in the patch "hugetlb: remove duplicate mmu notifications:". Since there are no user visible effects, this third is not tagged for stable backports. Previous discussions suggested further cleanup by removing the routine zap_page_range. This is possible because zap_page_range_single is now exported, and all callers of zap_page_range pass ranges entirely within a single vma. This work will be done in a later patch so as not to distract from this bug fix. [1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/ This patch (of 2): Expose the routine zap_page_range_single to zap a range within a single vma. The madvise routine madvise_dontneed_single_vma can use this routine as it explicitly operates on a single vma. Also, update the mmu notification range in zap_page_range_single to take hugetlb pmd sharing into account. This is required as MADV_DONTNEED supports hugetlb vmas. Link: https://lkml.kernel.org/r/20221114235507.294320-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20221114235507.294320-2-mike.kravetz@oracle.com Fixes: 90e7e7f5 ("mm: enable MADV_DONTNEED for hugetlb mappings") Signed-off-by:
-
Yang Shi authored
Syzbot reported the below splat: WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 __alloc_pages_node include/linux/gfp.h:221 [inline] WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 hpage_collapse_alloc_page mm/khugepaged.c:807 [inline] WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963 Modules linked in: CPU: 1 PID: 3646 Comm: syz-executor210 Not tainted 6.1.0-rc1-syzkaller-00454-ga7038524 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:__alloc_pages_node include/linux/gfp.h:221 [inline] RIP: 0010:hpage_collapse_alloc_page mm/khugepaged.c:807 [inline] RIP: 0010:alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963 Code: e5 01 4c 89 ee e8 6e f9 ae ff 4d 85 ed 0f 84 28 fc ff ff e8 70 fc ae ff 48 8d 6b ff 4c 8d 63 07 e9 16 fc ff ff e8 5e fc ae ff <0f> 0b e9 96 fa ff ff 41 bc 1a 00 00 00 e9 86 fd ff ff e8 47 fc ae RSP: 0018:ffffc90003fdf7d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888077f457c0 RSI: ffffffff81cd8f42 RDI: 0000000000000001 RBP: ffff888079388c0c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f6b48ccf700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6b48a819f0 CR3: 00000000171e7000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> collapse_file+0x1ca/0x5780 mm/khugepaged.c:1715 hpage_collapse_scan_file+0xd6c/0x17a0 mm/khugepaged.c:2156 madvise_collapse+0x53a/0xb40 mm/khugepaged.c:2611 madvise_vma_behavior+0xd0a/0x1cc0 mm/madvise.c:1066 madvise_walk_vmas+0x1c7/0x2b0 mm/madvise.c:1240 do_madvise.part.0+0x24a/0x340 mm/madvise.c:1419 do_madvise mm/madvise.c:1432 [inline] __do_sys_madvise mm/madvise.c:1432 [inline] __se_sys_madvise mm/madvise.c:1430 [inline] __x64_sys_madvise+0x113/0x150 mm/madvise.c:1430 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f6b48a4eef9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6b48ccf318 EFLAGS: 00000246 ORIG_RAX: 000000000000001c RAX: ffffffffffffffda RBX: 00007f6b48af0048 RCX: 00007f6b48a4eef9 RDX: 0000000000000019 RSI: 0000000000600003 RDI: 0000000020000000 RBP: 00007f6b48af0040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6b48aa53a4 R13: 00007f6b48bffcbf R14: 00007f6b48ccf400 R15: 0000000000022000 </TASK> It is because khugepaged allocates pages with __GFP_THISNODE, but the preferred node is bogus. The previous patch fixed the khugepaged code to avoid allocating page from non-existing node. But it is still racy against memory hotremove. There is no synchronization with the memory hotplug so it is possible that memory gets offline during a longer taking scanning. So this warning still seems not quite helpful because: * There is no guarantee the node is online for __GFP_THISNODE context for all the callsites. * Kernel just fails the allocation regardless the warning, and it looks all callsites handle the allocation failure gracefully. Although while the warning has helped to identify a buggy code, it is not safe in general and this warning could panic the system with panic-on-warn configuration which tends to be used surprisingly often. So replace VM_WARN_ON to pr_warn(). And the warning will be triggered if __GFP_NOWARN is set since the allocator would print out warning for such case if __GFP_NOWARN is not set. [shy828301@gmail.com: rename nid to this_node and gfp to warn_gfp] Link: https://lkml.kernel.org/r/20221123193014.153983-1-shy828301@gmail.com [akpm@linux-foundation.org: fix whitespace] [akpm@linux-foundation.org: print gfp_mask instead of warn_gfp, per Michel] Link: https://lkml.kernel.org/r/20221108184357.55614-3-shy828301@gmail.com Fixes: 7d8faaf1 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse") Signed-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
-
- 23 Nov, 2022 3 commits
-
-
Li Hua authored
If KPROBES_SANITY_TEST and ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled, but STACKTRACE is not set. Build failed as below: lib/test_kprobes.c: In function `stacktrace_return_handler': lib/test_kprobes.c:228:8: error: implicit declaration of function `stack_trace_save'; did you mean `stacktrace_driver'? [-Werror=implicit-function-declaration] ret = stack_trace_save(stack_buf, STACK_BUF_SIZE, 0); ^~~~~~~~~~~~~~~~ stacktrace_driver cc1: all warnings being treated as errors scripts/Makefile.build:250: recipe for target 'lib/test_kprobes.o' failed make[2]: *** [lib/test_kprobes.o] Error 1 To fix this error, Select STACKTRACE if ARCH_CORRECT_STACKTRACE_ON_KRETPROBE is enabled. Link: https://lkml.kernel.org/r/20221121030620.63181-1-hucool.lihua@huawei.com Fixes: 1f6d3a8f ("kprobes: Add a test case for stacktrace from kretprobe handler") Signed-off-by:Li Hua <hucool.lihua@huawei.com> Acked-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Chen Zhongjin authored
When extending segments, nilfs_sufile_alloc() is called to get an unassigned segment, then mark it as dirty to avoid accidentally allocating the same segment in the future. But for some special cases such as a corrupted image it can be unreliable. If such corruption of the dirty state of the segment occurs, nilfs2 may reallocate a segment that is in use and pick the same segment for writing twice at the same time. This will cause the problem reported by syzkaller: https://syzkaller.appspot.com/bug?id=c7c4748e11ffcc367cef04f76e02e931833cbd24 This case started with segbuf1.segnum = 3, nextnum = 4 when constructed. It supposed segment 4 has already been allocated and marked as dirty. However the dirty state was corrupted and segment 4 usage was not dirty. For the first time nilfs_segctor_extend_segments() segment 4 was allocated again, which made segbuf2 and next segbuf3 had same segment 4. sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added to both buffer lists of two segbuf. It makes the lists broken which causes NULL pointer dereference. Fix the problem by setting usage as dirty every time in nilfs_sufile_mark_dirty(), which is called during constructing current segment to be written out and before allocating next segment. [chenzhongjin@huawei.com: add lock protection per Ryusuke] Link: https://lkml.kernel.org/r/20221121091141.214703-1-chenzhongjin@huawei.com Link: https://lkml.kernel.org/r/20221118063304.140187-1-chenzhongjin@huawei.com Fixes: 9ff05123 ("nilfs2: segment constructor") Signed-off-by:
Chen Zhongjin <chenzhongjin@huawei.com> Reported-by: <syzbot+77e4f0...@syzkaller.appspotmail.com> Reported-by:
Liu Shixin <liushixin2@huawei.com> Acked-by:
-
Aneesh Kumar K.V authored
balance_dirty_pages doesn't do the required dirty throttling on cgroupv1. See commit 9badce00 ("cgroup, writeback: don't enable cgroup writeback on traditional hierarchies"). Instead, the kernel depends on writeback throttling in shrink_folio_list to achieve the same goal. With large memory systems, the flusher may not be able to writeback quickly enough such that we will start finding pages in the shrink_folio_list already in writeback. Hence for cgroupv1 let's do a reclaim throttle after waking up the flusher. The below test which used to fail on a 256GB system completes till the the file system is full with this change. root@lp2:/sys/fs/cgroup/memory# mkdir test root@lp2:/sys/fs/cgroup/memory# cd test/ root@lp2:/sys/fs/cgroup/memory/test# echo 120M > memory.limit_in_bytes root@lp2:/sys/fs/cgroup/memory/test# echo $$ > tasks root@lp2:/sys/fs/cgroup/memory/test# dd if=/dev/zero of=/home/kvaneesh/test bs=1M Killed Link: https://lkml.kernel.org/r/20221118070603.84081-1-aneesh.kumar@linux.ibm.comSigned-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Suggested-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
