An error occurred fetching the project authors.
- 06 Feb, 2019 40 commits
-
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 8ea3819c upstream. The cordic routine for calculating sines and cosines that was added in commit 6f98e62a ("b43: update cordic code to match current specs") contains an error whereby a quantity declared u32 can in fact go negative. This problem was detected by Priit Laes who is switching b43 to use the routine in the library functions of the kernel. Fixes: 98650454 ("b43: make cordic common (LP-PHY and N-PHY need it)") Reported-by: Priit Laes <plaes@plaes.org> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> # 2.6.34 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Andreas Gruenbacher authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 2d29f6b9 upstream. Fix the resource group wrap-around logic in gfs2_rbm_find that commit e579ed4f broke. The bug can lead to unnecessary repeated scanning of the same bitmaps; there is a risk that future changes will turn this into an endless loop. Fixes: e579ed4f ("GFS2: Introduce rbm field bii") Cc: stable@vger.kernel.org # v3.13+ Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit d47b41ac upstream. According to comment in dlm_user_request() ua should be freed in dlm_free_lkb() after successful attach to lkb. However ua is attached to lkb not in set_lock_args() but later, inside request_lock(). Fixes 597d0cae ("[DLM] dlm: user locks") Cc: stable@kernel.org # 2.6.19 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit c0174726 upstream. Fixes 6d40c4a7 ("dlm: improve error and debug messages") Cc: stable@kernel.org # 3.5 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 23851e97 upstream. Fixes 3d6aa675 ("dlm: keep lkbs in idr") Cc: stable@kernel.org # 3.1 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit b982896c upstream. If allocation fails on last elements of array need to free already allocated elements. v2: just move existing out_rsbtbl label to right place Fixes 789924ba635f ("dlm: fix race between remove and lookup") Cc: stable@kernel.org # 3.6 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Hui Peng authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit cbb2ebf7 upstream. In `create_composite_quirk`, the terminating condition of for loops is `quirk->ifnum < 0`. So any composite quirks should end with `struct snd_usb_audio_quirk` object with ifnum < 0. for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) { ..... } the data field of Bower's & Wilkins PX headphones usb device device quirks do not end with {.ifnum = -1}, wihch may result in out-of-bound read. This Patch fix the bug by adding an ending quirk object. Fixes: 240a8af9 ("ALSA: usb-audio: Add a quirck for B&W PX headphones") Signed-off-by: Hui Peng <benquike@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit f4351a19 upstream. The parser for the processing unit reads bNrInPins field before the bLength sanity check, which may lead to an out-of-bound access when a malformed descriptor is given. Fix it by assignment after the bLength check. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 1524f4e4 upstream. The "chip->dsp_spos_instance" can be NULL on some of the ealier error paths in snd_cs46xx_create(). Reported-by: "Yavuz, Tuba" <tuba@ece.ufl.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1811647 In chacha20-simd, clear the MAY_SLEEP flag in the blkcipher_desc to prevent sleeping with preemption disabled, under kernel_fpu_begin(). This was fixed upstream incidentally by a large refactoring, commit 9ae433bc ("crypto: chacha20 - convert generic and x86 versions to skcipher"). But syzkaller easily trips over this when running on older kernels, as it's easily reachable via AF_ALG. Therefore, this patch makes the minimal fix for older kernels. Fixes: c9320b6d ("crypto: chacha20 - Add a SSSE3 SIMD variant for x86_64") Cc: linux-crypto@vger.kernel.org Cc: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit b8be5674 upstream. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 4ecd55ea upstream. After commit d202cce8, an expired cache_head can be removed from the cache_detail's hash. However, the expired cache_head may be waiting for a reply from a previously submitted request. Such a cache_head has an increased refcounter and therefore it won't be freed after cache_put(freeme). Because the cache_head was removed from the hash it cannot be found during cache_clean() and can be leaked forever, together with stalled cache_request and other taken resources. In our case we noticed it because an entry in the export cache was holding a reference on a filesystem. Fixes d202cce8 ("sunrpc: never return expired entries in sunrpc_cache_lookup") Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: stable@kernel.org # 2.6.35 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 06489cfb upstream. Given the fact that devm_memremap_pages() requires a percpu_ref that is torn down by devm_memremap_pages_release() the current support for mapping RAM is broken. Support for remapping "System RAM" has been broken since the beginning and there is no existing user of this this code path, so just kill the support and make it an explicit error. This cleanup also simplifies a follow-on patch to fix the error path when setting a devm release action for devm_memremap_pages_release() fails. Link: http://lkml.kernel.org/r/154275557997.76910.14689813630968180480.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: "Jérôme Glisse" <jglisse@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 808153e1 upstream. devm_memremap_pages() is a facility that can create struct page entries for any arbitrary range and give drivers the ability to subvert core aspects of page management. Specifically the facility is tightly integrated with the kernel's memory hotplug functionality. It injects an altmap argument deep into the architecture specific vmemmap implementation to allow allocating from specific reserved pages, and it has Linux specific assumptions about page structure reference counting relative to get_user_pages() and get_user_pages_fast(). It was an oversight and a mistake that this was not marked EXPORT_SYMBOL_GPL from the outset. Again, devm_memremap_pagex() exposes and relies upon core kernel internal assumptions and will continue to evolve along with 'struct page', memory hotplug, and support for new memory types / topologies. Only an in-kernel GPL-only driver is expected to keep up with this ongoing evolution. This interface, and functionality derived from this interface, is not suitable for kernel-external drivers. Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Michal Hocko authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit b15c8726 upstream. We have received a bug report that an injected MCE about faulty memory prevents memory offline to succeed on 4.4 base kernel. The underlying reason was that the HWPoison page has an elevated reference count and the migration keeps failing. There are two problems with that. First of all it is dubious to migrate the poisoned page because we know that accessing that memory is possible to fail. Secondly it doesn't make any sense to migrate a potentially broken content and preserve the memory corruption over to a new location. Oscar has found out that 4.4 and the current upstream kernels behave slightly differently with his simply testcase === int main(void) { int ret; int i; int fd; char *array = malloc(4096); char *array_locked = malloc(4096); fd = open("/tmp/data", O_RDONLY); read(fd, array, 4095); for (i = 0; i < 4096; i++) array_locked[i] = 'd'; ret = mlock((void *)PAGE_ALIGN((unsigned long)array_locked), sizeof(array_locked)); if (ret) perror("mlock"); sleep (20); ret = madvise((void *)PAGE_ALIGN((unsigned long)array_locked), 4096, MADV_HWPOISON); if (ret) perror("madvise"); for (i = 0; i < 4096; i++) array_locked[i] = 'd'; return 0; } === + offline this memory. In 4.4 kernels he saw the hwpoisoned page to be returned back to the LRU list kernel: [<ffffffff81019ac9>] dump_trace+0x59/0x340 kernel: [<ffffffff81019e9a>] show_stack_log_lvl+0xea/0x170 kernel: [<ffffffff8101ac71>] show_stack+0x21/0x40 kernel: [<ffffffff8132bb90>] dump_stack+0x5c/0x7c kernel: [<ffffffff810815a1>] warn_slowpath_common+0x81/0xb0 kernel: [<ffffffff811a275c>] __pagevec_lru_add_fn+0x14c/0x160 kernel: [<ffffffff811a2eed>] pagevec_lru_move_fn+0xad/0x100 kernel: [<ffffffff811a334c>] __lru_cache_add+0x6c/0xb0 kernel: [<ffffffff81195236>] add_to_page_cache_lru+0x46/0x70 kernel: [<ffffffffa02b4373>] extent_readpages+0xc3/0x1a0 [btrfs] kernel: [<ffffffff811a16d7>] __do_page_cache_readahead+0x177/0x200 kernel: [<ffffffff811a18c8>] ondemand_readahead+0x168/0x2a0 kernel: [<ffffffff8119673f>] generic_file_read_iter+0x41f/0x660 kernel: [<ffffffff8120e50d>] __vfs_read+0xcd/0x140 kernel: [<ffffffff8120e9ea>] vfs_read+0x7a/0x120 kernel: [<ffffffff8121404b>] kernel_read+0x3b/0x50 kernel: [<ffffffff81215c80>] do_execveat_common.isra.29+0x490/0x6f0 kernel: [<ffffffff81215f08>] do_execve+0x28/0x30 kernel: [<ffffffff81095ddb>] call_usermodehelper_exec_async+0xfb/0x130 kernel: [<ffffffff8161c045>] ret_from_fork+0x55/0x80 And that latter confuses the hotremove path because an LRU page is attempted to be migrated and that fails due to an elevated reference count. It is quite possible that the reuse of the HWPoisoned page is some kind of fixed race condition but I am not really sure about that. With the upstream kernel the failure is slightly different. The page doesn't seem to have LRU bit set but isolate_movable_page simply fails and do_migrate_range simply puts all the isolated pages back to LRU and therefore no progress is made and scan_movable_pages finds same set of pages over and over again. Fix both cases by explicitly checking HWPoisoned pages before we even try to get reference on the page, try to unmap it if it is still mapped. As explained by Naoya: : Hwpoison code never unmapped those for no big reason because : Ksm pages never dominate memory, so we simply didn't have strong : motivation to save the pages. Also put WARN_ON(PageLRU) in case there is a race and we can hit LRU HWPoison pages which shouldn't happen but I couldn't convince myself about that. Naoya has noted the following: : Theoretically no such gurantee, because try_to_unmap() doesn't have a : guarantee of success and then memory_failure() returns immediately : when hwpoison_user_mappings fails. : Or the following code (comes after hwpoison_user_mappings block) also impli= : es : that the target page can still have PageLRU flag. : : /* : * Torn down by someone else? : */ : if (PageLRU(p) && !PageSwapCache(p) && p->mapping =3D=3D NULL) { : action_result(pfn, MF_MSG_TRUNCATED_LRU, MF_IGNORED); : res =3D -EBUSY; : goto out; : } : : So I think it's OK to keep "if (WARN_ON(PageLRU(page)))" block in : current version of your patch. Link: http://lkml.kernel.org/r/20181206120135.14079-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.com> Debugged-by: Oscar Salvador <osalvador@suse.com> Tested-by: Oscar Salvador <osalvador@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Steffen Maier authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 60a161b7 upstream. Suppose adapter (open) recovery is between opened QDIO queues and before (the end of) initial posting of status read buffers (SRBs). This time window can be seconds long due to FSF_PROT_HOST_CONNECTION_INITIALIZING causing by design looping with exponential increase sleeps in the function performing exchange config data during recovery [zfcp_erp_adapter_strat_fsf_xconf()]. Recovery triggered by local link up. Suppose an event occurs for which the FCP channel would send an unsolicited notification to zfcp by means of a previously posted SRB. We saw it with local cable pull (link down) in multi-initiator zoning with multiple NPIV-enabled subchannels of the same shared FCP channel. As soon as zfcp_erp_adapter_strategy_open_fsf() starts posting the initial status read buffers from within the adapter's ERP thread, the channel does send an unsolicited notification. Since v2.6.27 commit d26ab06e ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall"), zfcp_fsf_status_read_handler() schedules adapter->stat_work to re-fill the just consumed SRB from a work item. Now the ERP thread and the work item post SRBs in parallel. Both contexts call the helper function zfcp_status_read_refill(). The tracking of missing (to be posted / re-filled) SRBs is not thread-safe due to separate atomic_read() and atomic_dec(), in order to depend on posting success. Hence, both contexts can see atomic_read(&adapter->stat_miss) == 1. One of the two contexts posts one too many SRB. Zfcp gets QDIO_ERROR_SLSB_STATE on the output queue (trace tag "qdireq1") leading to zfcp_erp_adapter_shutdown() in zfcp_qdio_handler_error(). An obvious and seemingly clean fix would be to schedule stat_work from the ERP thread and wait for it to finish. This would serialize all SRB re-fills. However, we already have another work item wait on the ERP thread: adapter->scan_work runs zfcp_fc_scan_ports() which calls zfcp_fc_eval_gpn_ft(). The latter calls zfcp_erp_wait() to wait for all the open port recoveries during zfcp auto port scan, but in fact it waits for any pending recovery including an adapter recovery. This approach leads to a deadlock. [see also v3.19 commit 18f87a67 ("zfcp: auto port scan resiliency"); v2.6.37 commit d3e1088d ("[SCSI] zfcp: No ERP escalation on gpn_ft eval"); v2.6.28 commit fca55b6f ("[SCSI] zfcp: fix deadlock between wq triggered port scan and ERP") fixing v2.6.27 commit c57a39a4 ("[SCSI] zfcp: wait until adapter is finished with ERP during auto-port"); v2.6.27 commit cc8c2829 ("[SCSI] zfcp: Automatically attach remote ports")] Instead make the accounting of missing SRBs atomic for parallel execution in both the ERP thread and adapter->stat_work. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: d26ab06e ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall") Cc: <stable@vger.kernel.org> #2.6.27+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Tony Lindgren authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit e2ca26ec ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit 9ae4f842 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Benjamin Poirier authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit ca92e173 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit f1733a1d ] There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Peter Hutterer authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit c201e380 ] ABS_RESERVED was added in d9ca1c99 and accidentally removed as part of ffe0e7cf when the high-resolution scrolling code was removed. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Anson Huang authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit 1e434b70 ] The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f08 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Paul Mackerras authored
BugLink: https://bugs.launchpad.net/bugs/1811647 [ Upstream commit 5564597d ] Commit 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware. This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program. Fixes: 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN") Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 29bdedfd upstream. Commit e82b0b38 ("spi: bcm2835: Fix race on DMA termination") broke the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit operands (xtensa, older arm ISAs). Fix by changing the dma_pending flag's type from bool to unsigned int. Fixes: e82b0b38 ("spi: bcm2835: Fix race on DMA termination") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit d391f120 upstream. I was investigating an issue with seabios >= 1.10 which stopped working for nested KVM on Hyper-V. The problem appears to be in handle_ept_violation() function: when we do fast mmio we need to skip the instruction so we do kvm_skip_emulated_instruction(). This, however, depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS. However, this is not the case. Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when EPT MISCONFIG occurs. While on real hardware it was observed to be set, some hypervisors follow the spec and don't set it; we end up advancing IP with some random value. I checked with Microsoft and they confirmed they don't fill VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG. Fix the issue by doing instruction skip through emulator when running nested. Fixes: 68c3b4d1Suggested-by: Radim Krčmář <rkrcmar@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> [mhaboustak: backport to 4.9.y] Signed-off-by: Mike Haboustak <haboustak@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Georgy A Bystrenin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 9a596f5b upstream. While resolving a bug with locks on samba shares found a strange behavior. When a file locked by one node and we trying to lock it from another node it fail with errno 5 (EIO) but in that case errno must be set to (EACCES | EAGAIN). This isn't happening when we try to lock file second time on same node. In this case it returns EACCES as expected. Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in mount options). Further investigation showed that the mapping from status_to_posix_error is different for SMB1 and SMB2+ implementations. For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock] (See fs/cifs/netmisc.c line 66) but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO] (see fs/cifs/smb2maperror.c line 383) Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue. BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971Signed-off-by: Georgy A Bystrenin <gkot@altlinux.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit bec0de4c upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21131/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: <stable@vger.kernel.org> # 2.6.36+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 92aa0718 upstream. This patch is borrowed from ARM64 to ensure pmd_present() returns false after pmd_mknotpresent(). This is needed for THP. References: 5bb1cc0f ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()") Reviewed-by: James Hogan <jhogan@kernel.org> Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21135/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <james.hogan@mips.com> Cc: Steven J . Hill <Steven.Hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: <stable@vger.kernel.org> # 3.8+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Hans Verkuil authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 560ccb75 upstream. When vivid_update_format_cap() is called it should free any overlay bitmap since the compose size will change. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+0cc8e3cc63ca373722c6@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Macpaul Lin authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit eafb27fa upstream. Mediatek Preloader is a proprietary embedded boot loader for loading Little Kernel and Linux into device DRAM. This boot loader also handle firmware update. Mediatek Preloader will be enumerated as a virtual COM port when the device is connected to Windows or Linux OS via CDC-ACM class driver. When the USB enumeration has been done, Mediatek Preloader will send out handshake command "READY" to PC actively instead of waiting command from the download tool. Since Linux 4.12, the commit "tty: reset termios state on device registration" (93857edd) causes Mediatek Preloader receiving some abnoraml command like "READYXX" as it sent. This will be recognized as an incorrect response. The behavior change also causes the download handshake fail. This change only affects subsequent connects if the reconnected device happens to get the same minor number. By disabling the ECHO termios flag could avoid this problem. However, it cannot be done by user space configuration when download tool open /dev/ttyACM0. This is because the device running Mediatek Preloader will send handshake command "READY" immediately once the CDC-ACM driver is ready. This patch wants to fix above problem by introducing "DISABLE_ECHO" property in driver_info. When Mediatek Preloader is connected, the CDC-ACM driver could disable ECHO flag in termios to avoid the problem. Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 56c17234 upstream. The IRQ handler bcm2835_spi_interrupt() first reads as much as possible from the RX FIFO, then writes as much as possible to the TX FIFO. Afterwards it decides whether the transfer is finished by checking if the TX FIFO is empty. If very few bytes were written to the TX FIFO, they may already have been transmitted by the time the FIFO's emptiness is checked. As a result, the transfer will be declared finished and the chip will be reset without reading the corresponding received bytes from the RX FIFO. The odds of this happening increase with a high clock frequency (such that the TX FIFO drains quickly) and either passing "threadirqs" on the command line or enabling CONFIG_PREEMPT_RT_BASE (such that the IRQ handler may be preempted between filling the TX FIFO and checking its emptiness). Fix by instead checking whether rx_len has reached zero, which means that the transfer has been received in full. This is also more efficient as it avoids one bus read access per interrupt. Note that bcm2835_spi_transfer_one_poll() likewise uses rx_len to determine whether the transfer has finished. Signed-off-by: Lukas Wunner <lukas@wunner.de> Fixes: e34ff011 ("spi: bcm2835: move to the transfer_one driver model") Cc: stable@vger.kernel.org # v4.1+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit dbc94411 upstream. If submission of a DMA TX transfer succeeds but submission of the corresponding RX transfer does not, the BCM2835 SPI driver terminates the TX transfer but neglects to reset the dma_pending flag to false. Thus, if the next transfer uses interrupt mode (because it is shorter than BCM2835_SPI_DMA_MIN_LENGTH) and runs into a timeout, dmaengine_terminate_all() will be called both for TX (once more) and for RX (which was never started in the first place). Fix it. Signed-off-by: Lukas Wunner <lukas@wunner.de> Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Cc: stable@vger.kernel.org # v4.2+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Lukas Wunner authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit e82b0b38 upstream. If a DMA transfer finishes orderly right when spi_transfer_one_message() determines that it has timed out, the callbacks bcm2835_spi_dma_done() and bcm2835_spi_handle_err() race to call dmaengine_terminate_all(), potentially leading to double termination. Prevent by atomically changing the dma_pending flag before calling dmaengine_terminate_all(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Cc: stable@vger.kernel.org # v4.2+ Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit fde87268 upstream. Some time back, nfsd switched from calling vfs_fsync() to using a new commit_metadata() hook in export_operations(). If the file system did not provide a commit_metadata() hook, it fell back to using sync_inode_metadata(). Unfortunately doesn't work on all file systems. In particular, it doesn't work on ext4 due to how the inode gets journalled --- the VFS writeback code will not always call ext4_write_inode(). So we need to provide our own ext4_nfs_commit_metdata() method which calls ext4_write_inode() directly. Google-Bug-Id: 121195940 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
ruippan (潘睿) authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit e647e291 upstream. Commit e2b911c5 ("ext4: clean up feature test macros with predicate functions") broke the EXT4_IOC_GROUP_ADD ioctl. This was not noticed since only very old versions of resize2fs (before e2fsprogs 1.42) use this ioctl. However, using a new kernel with an enterprise Linux userspace will cause attempts to use online resize to fail with "No reserved GDT blocks". Fixes: e2b911c5 ("ext4: clean up feature test macros with predicate...") Cc: stable@kernel.org # v4.4 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: ruippan (潘睿) <ruippan@tencent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Maurizio Lombardi authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 132d00be upstream. In case of error, ext4_try_to_write_inline_data() should unlock and release the page it holds. Fixes: f19d5870 ("ext4: add normal write support for inline data") Cc: stable@kernel.org # 3.8 Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 61157b24 upstream. The function frees qf_inode via iput but then pass qf_inode to lockdep_set_quota_inode on the failure path. This may result in a use-after-free bug. The patch frees df_inode only when it is never used. Fixes: daf647d2 ("ext4: add lockdep annotations for i_data_sem") Cc: stable@kernel.org # 4.6 Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Ben Hutchings authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 11a64a05 upstream. Depending on which functions are inlined in util/pmu.c, the snprintf() calls in perf_pmu__parse_{scale,unit,per_pkg,snapshot}() might trigger a warning: util/pmu.c: In function 'pmu_aliases': util/pmu.c:178:31: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 4095 [-Werror=format-truncation=] snprintf(path, PATH_MAX, "%s/%s.unit", dir, name); ^~ I found this when trying to build perf from Linux 3.16 with gcc 8. However I can reproduce the problem in mainline if I force __perf_pmu__new_alias() to be inlined. Suppress this by using scnprintf() as has been done elsewhere in perf. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20181111184524.fux4taownc6ndbx6@decadent.org.ukSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit e8143499 upstream. ____kvm_handle_fault_on_reboot() provides a generic exception fixup handler that is used to cleanly handle faults on VMX/SVM instructions during reboot (or at least try to). If there isn't a reboot in progress, ____kvm_handle_fault_on_reboot() treats any exception as fatal to KVM and invokes kvm_spurious_fault(), which in turn generates a BUG() to get a stack trace and die. When it was originally added by commit 4ecac3fd ("KVM: Handle virtualization instruction #UD faults during reboot"), the "call" to kvm_spurious_fault() was handcoded as PUSH+JMP, where the PUSH'd value is the RIP of the faulting instructing. The PUSH+JMP trickery is necessary because the exception fixup handler code lies outside of its associated function, e.g. right after the function. An actual CALL from the .fixup code would show a slightly bogus stack trace, e.g. an extra "random" function would be inserted into the trace, as the return RIP on the stack would point to no known function (and the unwinder will likely try to guess who owns the RIP). Unfortunately, the JMP was replaced with a CALL when the macro was reworked to not spin indefinitely during reboot (commit b7c4145b "KVM: Don't spin on virt instruction faults during reboot"). This causes the aforementioned behavior where a bogus function is inserted into the stack trace, e.g. my builds like to blame free_kvm_area(). Revert the CALL back to a JMP. The changelog for commit b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") contains nothing that indicates the switch to CALL was deliberate. This is backed up by the fact that the PUSH <insn RIP> was left intact. Note that an alternative to the PUSH+JMP magic would be to JMP back to the "real" code and CALL from there, but that would require adding a JMP in the non-faulting path to avoid calling kvm_spurious_fault() and would add no value, i.e. the stack trace would be the same. Using CALL: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 4 PID: 1057 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc900004bbcc8 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888273fd8000 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000371fb0 R13: 0000000000000000 R14: 000000026d763cf4 R15: ffff888273fd8000 FS: 00007f3d69691700(0000) GS:ffff888277800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f89bc56fe0 CR3: 0000000271a5a001 CR4: 0000000000362ee0 Call Trace: free_kvm_area+0x1044/0x43ea [kvm_intel] ? vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace 9775b14b123b1713 ]--- Using JMP: ------------[ cut here ]------------ kernel BUG at /home/sean/go/src/kernel.org/linux/arch/x86/kvm/x86.c:356! invalid opcode: 0000 [#1] SMP CPU: 6 PID: 1067 Comm: qemu-system-x86 Not tainted 4.20.0-rc6+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_spurious_fault+0x5/0x10 [kvm] Code: <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffc90000497cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88827058bd40 R08: 00000000000003e8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000784 R12: ffffc90000369fb0 R13: 0000000000000000 R14: 00000003c8fc6642 R15: ffff88827058bd40 FS: 00007f3d7219e700(0000) GS:ffff888277900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3d64001000 CR3: 0000000271c6b004 CR4: 0000000000362ee0 Call Trace: vmx_vcpu_run+0x156/0x630 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0x447/0x1a40 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? kvm_vcpu_ioctl+0x368/0x5c0 [kvm] ? __set_task_blocked+0x38/0x90 ? __set_current_blocked+0x50/0x60 ? __fpu__restore_sig+0x97/0x490 ? do_vfs_ioctl+0xa1/0x620 ? __x64_sys_futex+0x89/0x180 ? ksys_ioctl+0x66/0x70 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x4f/0x100 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Modules linked in: vhost_net vhost tap kvm_intel kvm irqbypass bridge stp llc ---[ end trace f9daedb85ab3ddba ]--- Fixes: b7c4145b ("KVM: Don't spin on virt instruction faults during reboot") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-
Patrick Dreyer authored
BugLink: https://bugs.launchpad.net/bugs/1811647 commit 7db54c89 upstream. This adds ELAN0501 to the ACPI table to support Elan touchpad found in ASUS Aspire F5-573G. Signed-off-by: Patrick Dreyer <Patrick.Dreyer@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Juerg Haefliger <juergh@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
-