- 18 May, 2021 4 commits
-
-
Tobias Schramm authored
The Allwinner V3s and V3 SoCs feature a pwm controller identical to the one used in the Allwinner A20. This commit adds it to the V3s dtsi. Signed-off-by:
Tobias Schramm <t.schramm@manjaro.org> Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210513203527.2072090-3-t.schramm@manjaro.org
-
Tobias Schramm authored
The Allwinner V3s pwm peripheral is compatible with the pwm peripheral inside the Allwinner A20. This patch adds a compatible string for it. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chukun Pan authored
The NanoPi R1S H5 is a open source board made by FriendlyElec. It has the following features: - Allwinner H5, Quad-core Cortex-A53 - 512MB DDR3 RAM - 10/100/1000M Ethernet x 2 - RTL8189ETV WiFi 802.11b/g/n - USB 2.0 host port (A) - MicroSD Slot - Serial Debug Port - 5V 2A DC power-supply Signed-off-by:
Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by:
-
Chukun Pan authored
Add the bindings for NanoPi R1S H5 board. Signed-off-by:
-
- 11 May, 2021 10 commits
-
-
Samuel Holland authored
The PinePhone has a Bluetooth chip with its PCM interface connected to AIF3. Add the DAI link so headeset audio can be routed in hardware. Even though the link is 16 bit PCM, configuring the link a 32-bit slot is required for compatibility with AIF2, which also uses a 32-bit slot, and which shares clock dividers with AIF3. Using equal clock frequencies allows the modem and headset to be used at the same time. Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Samuel Holland authored
simple-audio-card supports either a single DAI link at the top level, or subnodes with one or more DAI links. To use the secondary AIFs on the codec, we need to add additional DAI links to the same sound card, so we need to use the other binding. Signed-off-by:
-
Samuel Holland authored
Now that the sun8i-codec driver supports AIF2 and AIF3, boards can use them in DAI links. Add the necessary pinmux nodes. Signed-off-by:
-
Samuel Holland authored
Increase #sound-dai-cells on the digital codec to allow using the other DAIs provided by the codec for AIF2 and AIF3. Signed-off-by:
-
Samuel Holland authored
Increase #sound-dai-cells on the digital codec to allow using the other DAIs provided by the codec for AIF2 and AIF3. Signed-off-by:
-
Samuel Holland authored
Increase sound-dai-cells to 1 to allow using the DAIs in the codec corresponding to AIF2 and AIF3. The generic ASoC OF code supports a #sound-dai-cells value of 0 or 1 with no impact to the driver, so this is a backward-compatible change. Signed-off-by:
-
Samuel Holland authored
For a CPU to enter an idle state, some timer must be available to trigger an IRQ and wake it back up. The local ARM architectural timer is not sufficient, because that timer stops when the CPU is powered down. The ARM architectural timer from some other CPU can be used, but doing so prevents that other CPU from entering an idle state. For all CPUs to power down at the same time, Linux needs a timer which is not tied to any CPU. Hook up the "sun4i" timer so it can be used for this purpose. It runs at 24 MHz, which balances resolution and power consumption. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Samuel Holland authored
Nodes should be sorted by unit address. Move the watchdog node to the correct place, so it will be next to the timer node when that is added. Signed-off-by:
-
Samuel Holland authored
The sun50i SoCs contain timer blocks which are useful as broadcast clockevent sources. They each have 2 interrupts, matching the A23 variant, so add the new compatible strings with the A23 compatible as a fallback. Acked-by:
-
Samuel Holland authored
The sun4i timer IP block has a variable number of interrupts based on the compatible. Use enums to combine the two sections for the existing 3-interrupt variants, and to simplify adding new compatible strings. Acked-by:
-
- 10 May, 2021 5 commits
-
-
Ivan Uvarov authored
The FETA40i-C is a SoM by Forlinx based on the Allwinner R40/A40i. SoM specifications: - SoC: R40 or A40i - PMIC: AXP221S - RAM: 1GiB/2GiB DDR3 (dual-rank) - eMMC: 8GB, - Mates with carrier board via four 80-pin connectors (AXK6F80337YG). OKA40i-C is a carrier board by the same manufacturer for this SoM, whose main purpose is as a development board with a wide variety of peripherals: - Power: DC5V barrel or USB OTG or 4.2V Lipo battery - Video out: HDMI, TV out, LVDS - WiFi+Bluetooth: RL-UM02WBS-8723BU-V1.2 (802.11 b/g/n, BT V2.1/3.0/4.0) - Ethernet: 10/100Mbps - Storage: µSD, fullsize SD, eMMC (on SoM), SATA - USB: 3 x USB2.0 Host (2 via hub, 1 native), 1 x USB2.0 OTG (micro-B) - UART: RS232, RS485, 4 3.3v uarts (of which 2 have RTS/CTS) - Other I/O: SPI x2, TWI, SDIO header, GPIO header, JTAG header - Mini PCIe slot with sim holder for WLAN modem - Smart card holder - RTC (RX8010SJ) - Two user LEDs - Three user buttons (via KeyADC). This patch adds a devicetree for the aforementioned SoM and devboard. In order to reflect the modularity of this devboard and simplify adding support for future hardware based on the same SoM, the devicetree is split: Everything pertaining to the SoM itself is described in a separate .dtsi file, which is included by the devboard's .dts. Reviewed-by:
Ivan Uvarov <i.uvarov@cognitivepilot.com> 3 files changed, 310 insertions(+) Signed-off-by:
-
Ivan Uvarov authored
The FETA40i-C is a SoM by Forlinx based on the Allwinner R40/A40i SoC. The OKA40i-C is a carrier/development board by the same company based on this SoM. This patch adds compatible strings for these two devices in preparation for the next patch containing a devicetree for them. Signed-off-by:
-
Ivan Uvarov authored
Baoding Forlinx Embedded Technology Co., Ltd. is the manufacturer of the Allwinner R40/A40i-powered FETA40i-C SoM and the OKA40i-C dev/carrier board based on it. This patch adds the DT vendor prefix for Forlinx in preparation for a further patch, which includes a devicetree for the OKA40i-C board. Signed-off-by:
-
Ivan Uvarov authored
The Forlinx OKA40i-C devboard makes use of UARTs 0,2,3,4,5 and 7 of the R40 SoC, of which UART 0 is connected to an RS232 converter, UART 5 routed to an RS485 converter, and the rest broken out directly via labeled headers. The board also contains a micro-SD slot connected to SDC3. This patch adds settings to R40's pinmux node for MMC3 and those UARTs that were not already mapped, which would allow us to make use of all available UARTs and the micro-SD slot on this board in a further patch. Reviewed-by:
-
Ivan Uvarov authored
This patch adds the /omit-if-no-ref/ keyword to the pio nodes for UART0 and UART3 pins of the R40 SoC, which would reduce the fdt size on boards which do not use these UARTs. Signed-off-by:
-
- 09 May, 2021 10 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Turns out the bio max size change still has issues, so let's get it reverted for 5.13-rc1. We'll shake out the issues there and defer it to 5.14 instead" * tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block: Revert "bio: limit bio max size"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small SMB3 chmultichannel related changesets (also for stable) from the SMB3 test event this week. The other fixes are still in review/testing" * tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6: smb3: if max_channels set to more than one channel request multichannel smb3: do not attempt multichannel to server which does not support it smb3: when mounting with multichannel include it in requested capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent PSI state corruption when schedule() races with cgroup move. A recent commit combined two PSI callbacks to reduce the number of cgroup tree updates, but missed that schedule() can drop rq::lock for load balancing, which opens the race window for cgroup_move_task() which then observes half updated state. The fix is to solely use task::ps_flags instead of looking at the potentially mismatching scheduler state - Prevent an out-of-bounds access in uclamp caused bu a rounding division which can lead to an off-by-one error exceeding the buckets array size. - Prevent unfairness caused by missing load decay when a task is attached to a cfs runqueue. The old load of the task was attached to the runqueue and never removed. Fix it by enforcing the load update through the hierarchy for unthrottled run queue instances. - A documentation fix fot the 'sched_verbose' command line option" * tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unfairness caused by missing load decay sched: Fix out-of-bound access in uclamp psi: Fix psi state corruption when schedule() races with cgroup move sched,doc: sched_debug_verbose cmdline should be sched_verbose -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "A set of locking related fixes and updates: - Two fixes for the futex syscall related to the timeout handling. FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and because it's not set the time namespace adjustment for clock MONOTONIC is applied wrongly. FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its always a relative timeout. - Cleanups in the futex syscall entry points which became obvious when the two timeout handling bugs were fixed. - Cleanup of queued_write_lock_slowpath() as suggested by Linus - Fixup of the smp_call_function_single_async() prototype" * tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: futex: Make syscall entry points less convoluted futex: Get rid of the val2 conditional dance futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op") locking/qrwlock: Cleanup queued_write_lock_slowpath() smp: Fix smp_call_function_single_async prototype -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fix from Borislav Petkov: "Handle power-gating of AMD IOMMU perf counters properly when they are used" * tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "A bunch of things accumulated for x86 in the last two weeks: - Fix guest vtime accounting so that ticks happening while the guest is running can also be accounted to it. Along with a consolidation to the guest-specific context tracking helpers. - Provide for the host NMI handler running after a VMX VMEXIT to be able to run on the kernel stack correctly. - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt relevant - real hw supports both) - A code generation improvement to TASK_SIZE_MAX through the use of alternatives - The usual misc and related cleanups and improvements" * tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM: x86: Consolidate guest enter/exit logic to common helpers context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain context_tracking: Consolidate guest enter/exit wrappers sched/vtime: Move guest enter/exit vtime accounting to vtime.h sched/vtime: Move vtime accounting external declarations above inlines KVM: x86: Defer vtime accounting 'til after IRQ handling context_tracking: Move guest exit vtime accounting to separate helpers context_tracking: Move guest exit context tracking to separate helpers KVM/VMX: Invoke NMI non-IST entry instead of IST entry x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported x86/resctrl: Fix init const confusion x86: Delete UD0, UD1 traces x86/smpboot: Remove duplicate includes x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant -
Jens Axboe authored
This reverts commit cd2c7545. Alex reports that the commit causes corruption with LUKS on ext4. Revert it for now so that this can be investigated properly. Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 08 May, 2021 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid over-allocating the kernel's mapping on !MMU systems, which could lead to up to 2MiB of lost memory - The SiFive address extension errata only manifest on rv64, they are now disabled on rv32 where they are unnecessary - A pair of late-landing cleanups * tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove unused handle_exception symbol riscv: Consistify protect_kernel_linear_mapping_text_rodata() use riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y riscv: Only extend kernel reservation if mapped read-only
-
Linus Torvalds authored
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes in various drivers (qla2xxx, ufs, scsi_debug, lpfc) one doc fix and a fairly large update to the fnic driver to remove the open coded iteration functions in favour of the scsi provided ones" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: fnic: Use scsi_host_busy_iter() to traverse commands scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io() scsi: scsi_debug: Fix cmd_per_lun, set to max_queue scsi: ufs: core: Narrow down fast path in system suspend path scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend scsi: ufs: core: Do not put UFS power into LPM if link is broken scsi: qla2xxx: Prevent PRLI in target mode scsi: qla2xxx: Add marginal path handling support scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found scsi: ufs: core: Fix a typo in ufs-sysfs.c scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command scsi: lpfc: Fix DMA virtual address ptr assignment in bsg scsi: lpfc: Fix illegal memory access on Abort IOCBs scsi: blk-mq: Fix build warning when making htmldocs
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - Convert sh and sparc to use generic shell scripts to generate the syscall headers - refactor .gitignore files - Update kernel/config_data.gz only when the content of the .config is really changed, which avoids the unneeded re-link of vmlinux - move "remove stale files" workarounds to scripts/remove-stale-files - suppress unused-but-set-variable warnings by default for Clang as well - fix locale setting LANG=C to LC_ALL=C - improve 'make distclean' - always keep intermediate objects from scripts/link-vmlinux.sh - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained - misc cleanups * tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h> kbuild: Don't remove link-vmlinux temporary files on exit/signal kbuild: remove the unneeded comments for external module builds kbuild: make distclean remove tag files in sub-directories kbuild: make distclean work against $(objtree) instead of $(srctree) kbuild: refactor modname-multi by using suffix-search kbuild: refactor fdtoverlay rule kbuild: parameterize the .o part of suffix-search arch: use cross_compiling to check whether it is a cross build or not kbuild: remove ARCH=sh64 support from top Makefile .gitignore: prefix local generated files with a slash kbuild: replace LANG=C with LC_ALL=C Makefile: Move -Wno-unused-but-set-variable out of GCC only block kbuild: add a script to remove stale generated files kbuild: update config_data.gz only when the content of .config is changed .gitignore: ignore only top-level modules.builtin .gitignore: move tags and TAGS close to other tag files kernel/.gitgnore: remove stale timeconst.h and hz.bc usr/include: refactor .gitignore genksyms: fix stale comment ...
-
Steve French authored
Mounting with "multichannel" is obviously implied if user requested more than one channel on mount (ie mount parm max_channels>1). Currently both have to be specified. Fix that so that if max_channels is greater than 1 on mount, enable multichannel rather than silently falling back to non-multichannel. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-By:
Tom Talpey <tom@talpey.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by:
Shyam Prasad N <sprasad@microsoft.com>
-
Steve French authored
We were ignoring CAP_MULTI_CHANNEL in the server response - if the server doesn't support multichannel we should not be attempting it. See MS-SMB2 section 3.2.5.2 Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates and fixes from Michael Ellerman: "A bit of a mixture of things, tying up some loose ends. There's the removal of the nvlink code, which dependend on a commit in the vfio tree. Then the enablement of huge vmalloc which was in next for a few weeks but got dropped due to conflicts. And there's also a few fixes. Summary: - Remove the nvlink support now that it's only user has been removed. - Enable huge vmalloc mappings for Radix MMU (P9). - Fix KVM conversion to gfn-based MMU notifier callbacks. - Fix a kexec/kdump crash with hot plugged CPUs. - Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR. - Restore alphabetic order of the selects under CONFIG_PPC. Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin, Sandipan Das, and Sourabh Jain" * tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR powerpc/powernv/memtrace: Fix dcache flushing powerpc/kexec_file: Use current CPU info while setting up FDT powerpc/64s/radix: Enable huge vmalloc mappings powerpc/powernv: remove the nvlink support
-
Steve French authored
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to advertise CAP_MULTICHANNEL capability when establishing multiple channels has been requested by the user doing the mount. See MS-SMB2 sections 2.2.3 and 3.2.5.2 Without setting it there is some risk that multichannel could fail if the server interpreted the field strictly. Reviewed-By:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc1, including fixes from bpf, can and netfilter trees. Self-contained fixes, nothing risky. Current release - new code bugs: - dsa: ksz: fix a few bugs found by static-checker in the new driver - stmmac: fix frame preemption handshake not triggering after interface restart Previous releases - regressions: - make nla_strcmp handle more then one trailing null character - fix stack OOB reads while fragmenting IPv4 packets in openvswitch and net/sched - sctp: do asoc update earlier in sctp_sf_do_dupcook_a - sctp: delay auto_asconf init until binding the first addr - stmmac: clear receive all(RA) bit when promiscuous mode is off - can: mcp251x: fix resume from sleep before interface was brought up Previous releases - always broken: - bpf: fix leakage of uninitialized bpf stack under speculation - bpf: fix masking negation logic upon negative dst register - netfilter: don't assume that skb_header_pointer() will never fail - only allow init netns to set default tcp cong to a restricted algo - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid false positive errors - ethtool: fix missing NLM_F_MULTI flag when dumping - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b - bridge: fix NULL-deref caused by a races between assigning rx_handler_data and setting the IFF_BRIDGE_PORT bit Latecomer: - seg6: add counters support for SRv6 Behaviors" * tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) atm: firestream: Use fallthrough pseudo-keyword net: stmmac: Do not enable RX FIFO overflow interrupts mptcp: fix splat when closing unaccepted socket i40e: Remove LLDP frame filters i40e: Fix PHY type identifiers for 2.5G and 5G adapters i40e: fix the restart auto-negotiation after FEC modified i40e: Fix use-after-free in i40e_client_subtask() i40e: fix broken XDP support netfilter: nftables: avoid potential overflows on 32bit arches netfilter: nftables: avoid overflows in nft_hash_buckets() tcp: Specify cmsgbuf is user pointer for receive zerocopy. mlxsw: spectrum_mr: Update egress RIF list before route's action net: ipa: fix inter-EE IRQ register definitions can: m_can: m_can_tx_work_queue(): fix tx_skb race condition can: mcp251x: fix resume from sleep before interface was brought up can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe netfilter: nftables: Fix a memleak from userdata error path in new objects netfilter: remove BUG_ON() after skb_header_pointer() netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check ... -
Masahiro Yamada authored
<linux/kconfig.h> is included from all the kernel-space source files, including C, assembly, linker scripts. It is intended to contain a minimal set of macros to evaluate CONFIG options. IF_ENABLED() is an intruder here because (x ? y : z) is C code, which should not be included from assembly files or linker scripts. Also, <linux/kconfig.h> is no longer self-contained because NULL is defined in <linux/stddef.h>. Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF() takes the general boolean expression instead of a CONFIG option so that it fits better in <linux/kernel.h>. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org>
-
Michael Ellerman authored
Merge master back into next, this allows us to resolve some conflicts in arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so that they are in alphabetical order again.
-
