- 21 Dec, 2023 40 commits
-
-
Matthew Auld authored
On PVC unloading followed by reloading the module often results in a completely dead machine (seems to be plaguing CI). Resetting the GuC like we do at load seems to cure it at least when locally testing this. v2: - Move pc_fini into guc_fini. We want to do the GuC reset just after calling pc_fini, otherwise we encounter communication failures. It also seems like a good idea to do the reset before we start releasing the various other GuC resources. In the case of pc_fini there is an explicit stop, but for other stuff like logs, ads, ctb there is not. References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/542 References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/597Signed-off-by:Matthew Auld <matthew.auld@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Pallavi Mishra authored
Reorder vm_id check after the one for VISIBLE_VRAM. This should prevent returning with locked vm in error scenario. Signed-off-by:
Pallavi Mishra <pallavi.mishra@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by:
-
Zhanjun Dong authored
Add patch version info on GuC firmware init. This is required info for GuC log decoder. Signed-off-by:
Zhanjun Dong <zhanjun.dong@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://lore.kernel.org/r/20230817213028.838531-1-zhanjun.dong@intel.comSigned-off-by:
-
Niranjana Vishwanathapura authored
Some copy hardware engine instances are faster than others on PVC. Use a virtual engine of these plus the reserved instance for the migrate engine on PVC. The idea being if a fast instance is available it will be used and the throughput of kernel copies, clears, and pagefault servicing will be higher. v2: Use OOB WA, use all copy engines if no WA is required Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
-
Niranjana Vishwanathapura authored
Wa_16017236439 requires that we update BCS_SWCTRL (via indirect context batch buffer) to set 64B transfers when running on an even-numbered BCS engine and 256B on an odd-numbered BCS engine. v2: Move WA from engine_was[] to lrc_was[] Reviewed-by:
Tejas Upadhyay <tejas.upadhyay@intel.com> Signed-off-by:
-
Niranjana Vishwanathapura authored
Wa_16017236439 requires the BCS_SWCTRL to be privileged. v2: Define and use BCS_SWCTRL() Reviewed-by:
-
Matthew Auld authored
Actually print the info.resv_space. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The current only submission in the driver that doesn't use a vm is the WA setup. We still pass a vm structure (the migration one), but we don't actually use it at submission time and we instead have an hack to use GGTT for this particular engine. Instead of special-casing the WA engine, we can skip providing a VM and use that as selector for whether to use GGTT or PPGTT. As part of this change, we can drop the special engine flag for the WA engine and switch the WA submission to use the standard job functions instead of dedicated ones. v2: rebased on s/engine/exec_queue Signed-off-by:
-
Daniele Ceraolo Spurio authored
If an engine is only destroyed on driver unload, we can skip its clean-up steps with the GuC because the GuC is going to be tuned off as well, so it doesn't matter if we're in sync with it or not. Currently, we apply this optimization to all engines marked as kernel, but this stops us to supporting kernel engines that don't stick around until unload. To remove this limitation, add a separate flag to indicate if the engine is expected to only be destryed on driver unload and use that to trigger the optimzation. While at it, add a small comment to explain what each engine flag represents. v2: s/XE_BUG_ON/XE_WARN_ON, s/ENGINE/EXEC_QUEUE v3: rebased Signed-off-by:
-
Daniele Ceraolo Spurio authored
Kernel queues can submit privileged batches directly in GGTT, so they don't always need a vm. The submission front-end already supports creating and submitting jobs without a vm, but some parts of the back-end assume the vm is always there. Fix this by handling a lack of vm in the back-end as well. v2: s/XE_BUG_ON/XE_WARN_ON, s/engine/exec_queue Signed-off-by:
-
Matt Roper authored
The only possible 64-bit register writes in the driver come from the highly questionable MMIO ioctl. That ioctl's register write support only operates for userspace running as root and cannot be used by any real userspace; it exists solely to support the "xe_reg" debug tool in IGT. Since the spec indicates that hardware does not officially support 64-bit register accesses, there's no reason to allow such 64-bit writes, even for debugging. Bspec: 60027 Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://lore.kernel.org/r/20230823003312.1356779-4-matthew.d.roper@intel.comSigned-off-by:
-
Matt Roper authored
Intel hardware officially only supports GTTMMADR register accesses of 32-bits or less (although 64-bit accesses to device memory and PTEs in the GSM are fine). Even though we do usually seem to get back reasonable values when performing readq() operations on registers in BAR0, we shouldn't rely on this violation of the spec working consistently. It's likely that even when we do get proper register values back the hardware is internally satisfying the request via a non-atomic sequence of two 32-bit reads, which can be problematic for timestamps and counters if rollover of the lower bits is not considered. Replace xe_mmio_read64() with xe_mmio_read64_2x32() that implements 64-bit register reads as two 32-bit reads and attempts to ensure that the upper dword has stabilized to avoid problematic rollovers for counter and timestamp registers. v2: - Move function from xe_mmio.h to xe_mmio.c. (Lucas) - Convert comment to kerneldoc and note that it shouldn't be used on registers where reads may trigger side effects. (Lucas) Bspec: 60027 Reviewed-by:
-
Balasubramani Vivekanandan authored
LNL uses the Xe2 MOCS table introduced in an earlier patch. Bspec: 71582 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Matt Roper authored
Define the GuC firmware to load on the platform. Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Matt Roper authored
LNL is an integrated GPU based on the Xe2 architecture. Bspec: 70821 Signed-off-by:
-
Matt Roper authored
As with PVC, Xe2 platforms require that the index of an uncached MOCS entry be programmed into the GUC_SHIM_CONTROL register. This will likely be needed on future platforms as well. Xe2 also extends the size of the MOCS index register field from two bits to four bits. Since these extra bits were unused on PVC, it should be safe to just increase the size of the mask. Bspec: 60592 Cc: Haridhar Kalvala <haridhar.kalvala@intel.com> Signed-off-by:
-
Balasubramani Vivekanandan authored
Additional minor change to remove L4_2_RESERVED, which will never be required. v2: Make L3/L4 names consistent for GLOB_MOCS defines (Matt Roper) Bspec: 71582 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Starting with Xe2, a 5-level page table is always used, regardless of the actual virtual address range supported by the platform. The two values need to be tracked separately in the device descriptor since Xe2 platforms only have a 48 bit virtual address range. Bspec: 59505, 65637, 70817 Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Matt Roper authored
Xe2_LPM media is represented by GMD_ID value 20.00. It provides 1 VD + 1 VE + 1 SFC. Bspec: 70821, 70819 Signed-off-by:
-
Matt Roper authored
Define a common set of Xe2 graphics feature flags and definitions that will be used for all platforms in this family. Several of the feature flags are inherited unchanged from Xe_HP and/or Xe_HPC platforms: - dma_mask_size remains 46 (Bspec 70817) - supports_usm=1 (Bspec 59651) - has_flatccs=1 (Bspec 58797) - has_asid=1 (Bspec 59654, 59265, 60288) - has_range_tlb_invalidate=1 (Bspec 71126) However some of them still need proper implementation in the driver to be used, so they are disabled. Notable Xe2-specific changes: - All Xe2 platforms use a five-level page table, regardless of the virtual address space for the platform. (Bspec 59505) The graphics engine mask represents the Xe2 architecture engines (Bspec 60149), but individual platforms may have a reduced set of usable engines, as reflected by their fusing. Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
-
Matt Roper authored
Starting with Xe2, all platforms (including igpu platforms) use FlatCCS compression rather than AuxCCS. Similar to PVC, any future platforms that don't support FlatCCS should not attempt to fall back to AuxCCS programming. Signed-off-by:
-
Matt Roper authored
On Xe2 platforms, availability of the CCS engines is reflected in the FUSE4 register. Bspec: 62483 Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
-
Matt Roper authored
Engine register state layout has changed a bit on Xe2. We'll also explicitly define a BCS layout to ensure BLIT_SWCTL and BLIT_CCTL are included. Bspec: 65182, 60184, 55793 Signed-off-by:
-
Matt Roper authored
Xe2 media has a few types of MCR registers, but all except for "GPMXMT" can safely steer to instance 0,0. GPMXMT follows the same rules that MTL's OADDRM ranges did, so it can re-use the same enum value. Bspec: 71186 Signed-off-by:
-
Matt Roper authored
Xe2 uses the same steering control register and steering semaphore register as MTL. As with recent platforms, group/instance 0,0 is sufficient to target a non-terminated instance for most classes of MCR registers; the only types of ranges that need to consider platform fusing to find a non-terminated instance are SLICE/DSS ranges and a new SQIDI_PSMI type of range. Note that the range of valid bits in XE2_NODE_ENABLE_MASK may be reduced for some Xe2 SKUs. However the lowest bits are always valid and only the lowest instance is obtained via __ffs(), so there's no need to complicate the masking with extra platform/subplatform checks. Also note that Wa_14017387313 suggests skipping MCR lock acquisition around GAM and GAMWKR registers to prevent MCR register accesses in an interrupt handler from deadlocking when the steering semaphore is already held outside the interrupt context. At this time Xe never issues MCR accesses from within an interrupt handler so the workaround is not currently needed. v2: - [0x008700-0x0087FF] range to extend up to 0x887F (Matt Attwood) - [0x00EF00-0x00F4FF] -> [0x00F000, 0xFFFF] to follow latest bspec version (Bala) Bspec: 71185 Signed-off-by: -
Matt Roper authored
Xe2 platforms have three DSS fuse registers for both geometry and compute. Bspec: 67171, 67537, 67401, 67536 Signed-off-by:
-
Matt Roper authored
The render and compute context are significantly smaller on Xe2 than on previous platforms. Registers: - Render: 3008 dwords -> 12032 bytes -> round to 3 pages - Compute: 1424 dwords -> 5696 bytes -> round to 2 pages We also allocate one additional page for the HWSP, so the total allocation sizes for render and compute are 4 and 3 pages respectively. Bspec: 65182, 56578, 55793 Signed-off-by:
-
Matt Roper authored
The choice of Y-major tiling format (either the legacy "TileY" or the newer "Tile4") is based on graphics IP version (12.50 and beyond have Tile4, earlier platforms have TileY). The tracking in xe was originally added to allow re-using display from i915. However as of i915 commit 4ebf43d0 ("drm/i915: Eliminate has_4tile feature flag"), the display code determines TileY vs Tile4 itself, so this can be removed from xe. Reviewed-by:
-
Daniele Ceraolo Spurio authored
On MTL (and only on MTL) the GSCCS defaults with idle messaging disabled. This means that, once awoken, the GSCCS will never signal its idleness to the GT. To allow the GT to enter the proper low-power state, we need therefore to turn idle messaging on. As part of this, we also need to set a proper hysteresis value for the engine. v2: use MEDIA_VERSION() and CLR() for the RTP rule and action, add reg bit define in descending order (Matt) Bspec: 71496 Signed-off-by:
-
Daniele Ceraolo Spurio authored
The kernel is the only expected user of the GSCCS, so we don't want to expose it to userspace. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The ID for the GSC forcewake domain already exists, but we're missing the register definitions and the domain intialization, so add that in. v2: move reg definition to be in address order (Matt) Signed-off-by:
-
Daniele Ceraolo Spurio authored
Like the BCS, the GSCCS doesn't have any special HW that needs handling when emitting commands, so we can re-use the same emit_job code. To make it clear that this is now a shared low-level function, it has been renamed to use the "simple" postfix, instead of "copy", to indicate that it applies to all engines that don't need any additional engine-specific handling. Signed-off-by:
-
Daniele Ceraolo Spurio authored
The GSCCS has its own enable and mask registers. The interrupt identity for the GSCCS shows OTHER_CLASS instance 6. Bspec: 54029, 54030 Signed-off-by:
-
Daniele Ceraolo Spurio authored
The first step in introducing the GSCCS is to add all the basic defs for it (name, mmio base, class/instance, lrc size etc). Bspec: 60149, 60421, 63752 Signed-off-by:
-
Daniele Ceraolo Spurio authored
The queue name assignment is identical in both GuC and execlists backends, so we can move it to a common function. This will make adding a new entry in the next patch slightly cleaner. Signed-off-by:
-
Niranjana Vishwanathapura authored
Allow preemption timeout to be specified as a config option. v2: Change unit to microseconds (Tejas) v3: Remove get_default_preempt_timeout() Reviewed-by:
-
Niranjana Vishwanathapura authored
Shortens the too long code lines. Reviewed-by:
-
Shekhar Chauhan authored
Since this is specific to DirectX, we don't need it on Linux. Signed-off-by:
Shekhar Chauhan <shekhar.chauhan@intel.com> Reviewed-by:
-
Oak Zeng authored
Print both device physical address range and CPU io range of vram. Also print vram's actual size, usable size excluding stolen memory, and CPU io accessible size. V1: - Add back small BAR device info (Matt) Signed-off-by:
Oak Zeng <oak.zeng@intel.com> Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
-
Oak Zeng authored
Make a xe_mem_region structure which will be used in the coming patches. The new structure is used in both xe device level (xe->mem.vram) and xe_tile level (tile->vram). Make the definition of xe_mem_region.dpa_base to be the DPA base of this memory region and change codes according to this new definition. v1: - rename xe_mem_region.base to dpa_base per conversation with Mike Ruhl Signed-off-by:
-
