- 22 Nov, 2021 27 commits
-
-
Jiapeng Chong authored
Eliminate the follow smatch warning: drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv.c:622 dmub_srv_cmd_execute() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
hongao authored
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode which assign amdgpu_encoder->native_mode with *preferred_mode result in amdgpu_encoder->native_mode.clock always be 0. That will cause amdgpu_connector_set_property returned early on: if ((rmx_type != DRM_MODE_SCALE_NONE) && (amdgpu_encoder->native_mode.clock == 0)) when we try to set scaling mode Full/Full aspect/Center. Add the missing function to amdgpu_connector_vga_get_mode can fix this. It also works on dvi connectors because amdgpu_connector_dvi_helper_funcs.get_mode use the same method. Signed-off-by:
hongao <hongao@uniontech.com> Signed-off-by:
-
Roman Li authored
[Why] After commit ("drm/amdgpu/display: add support for multiple backlights") number of eDPs is defined while registering backlight device. However the panel's extended caps get updated once before register call. That leads to regression with extended caps like oled brightness control. [How] Update connector ext caps after register_backlight_device Fixes: 7fd13bae ("drm/amdgpu/display: add support for multiple backlights") Link: https://www.reddit.com/r/AMDLaptops/comments/qst0fm/after_updating_to_linux_515_my_brightness/Signed-off-by:Roman Li <Roman.Li@amd.com> Tested-by:
Samuel Čavoj <samuel@cavoj.net> Acked-by:
Jasdeep Dhillon <Jasdeep.Dhillon@amd.com> Signed-off-by:
-
Candice Li authored
Fix race condition failure during UMC UE injection. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Tao Zhou authored
If gpu reset is triggered by ras fatal error, tell it to smu in mode-1 reset message. v2: move mode-1 reset function to aldebaran_ppt.c since it's aldebaran specific currently. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
shaoyunl authored
In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Lijo Lazar authored
Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by:
-
Evan Quan authored
Just bail out if the target IP block is already in the desired powergate/ungate state. This can avoid some duplicate settings which sometimes may cause unexpected issues. Link: https://lore.kernel.org/all/YV81vidWQLWvATMM@zn.tnic/ Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Sung Joon Kim authored
[why] Change causing issue. Need to revert the change. Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Sung Joon Kim <sungkim@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Aric Cyr authored
This version brings along following fixes: - Fix issue that secondary display goes blank on Non DCN31. - Adjust flushing data in DMCUB - Revert patches which cause regression in hadnling MPO/Link encoder assignment - Correct the setting within MSA of DP2.0 - Adjustment for DML isolation - Fix FIFO erro in fast boot sequence - Enable DSC over eDP - Adjust the DSC power off sequence Reviewed-by:
-
Yi-Ling Chen authored
[WHY] After unloading driver, driver would not disable DSC function. At next loading driver, driver would power all DSC engines off. When driver powered the active DSC off, the screen would be gray until reprograming DSC relatived register correcntly. [HOW] 1. Remove DSC Power down code into init_pipes() 2. Depend on the OTG mapping information and DSC status to skip power off for the working DSC. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Tested-by:
-
Anthony Koo authored
- Fix ARR39-C issue with scaled integer addition in rb func Reviewed-by:
-
Anthony Koo authored
Acked-by:
-
hvanzyll authored
[What] This change allows adjustment to the Visual Confirm height border. [Why] Aids debugging and testing [How] Use the existing infrastructure to implement logic to draw borders Reviewed-by:
Harry VanZyllDeJong <hvanzyll@amd.com> Tested-by:
-
Brandon Syu authored
[WHY] With eDP DSC enabled and set 4K 60Hz, there would be screen corruption when booting to OS or enabling the driver. [HOW] Avoid powering down VDD when we cannot apply eDP fast boot. Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Brandon Syu <Brandon.Syu@amd.com> Tested-by:
-
Mikita Lipski authored
[why] - Adding a DM interface to enable DSC over eDP on Linux - DSC over eDP will allow to power savings by reducing the bandwidth required to support panel's modes - Apply link optimization algorithm to reduce link bandwidth when DSC is enabled [how] - Read eDP panel's DSC capabilities - Apply DSC policy on eDP panel based on its DSC capabilities - Enable DSC encoder's on the pipe - Enable DSC on panel's side by setting DSC_ENABLE DPCD register - Adding link optimization algorithm to reduce link rate or lane count based Reviewed-by:
Mikita Lipski <mikita.lipski@amd.com> Tested-by:
-
Angus Wang authored
[WHY] Previous LTTPR change has caused a regression that led to an issue where LTTPR is disabled [HOW] Extended changes from previous fix to DCN30X Reviewed-by:
Wesley Chalmers <wesley.chalmers@amd.com> Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Angus Wang <angus.wang@amd.com> Signed-off-by:
-
Xu, Jinze authored
[Why] In fast boot sequence, when change dispclk, otg is disabled but digfe is enabled. This may cause dig fifo error. [How] Reset dig fifo after enable otg. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Reviewed-by:
JinZe.Xu <JinZe.Xu@amd.com> Tested-by:
-
Jun Lei authored
[why] DML itself is SW only, putting the logic as part of resource makes it hw dependent and thus impossible to compile separately from dc. Separate compilation is critical for unit testing as well as bbox tool development [how] create new dml wrapper. Copy logic from the validation functions into dml wrapper as base implementation. Dml wrapper has internal/static implementations for all helpers, and does not reference other functions. It may reference dc structures/types for convenience. This change now has all the changes for DML isolation squashed into one. Reviewed-by:
-
Wenjing Liu authored
[why] There is a bug in MSA programming sequence that mistakenly set MSA vsp/hsp to 1 for positive polarity. This is incorrect. Reviewed-by:
Ariel Bernstein <Eric.Bernstein@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Angus Wang authored
[WHY] The previous changes for fixing MPO underflow with multiple display connected caused a regression where the machine runs into a hang when doing multiple driver pnp with multiple displays connected [HOW] Reverted offending change Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] We're currently flushing commands that had been previously been flushed or are currently being processed by the DMCUB when we don't immediately wait for idle after command execution. [How] Avoiding reflushing the data by keeping track of the last wptr. We'll treat this as the actual rptr by creating a copy of the inbox and modifying the copy's rptr. Reviewed-by:
Eric Yang <Eric.Yang2@amd.com> Acked-by:
-
Ahmad Othman authored
[Why] Due to integration issues with branch merging, a regression happened that prevented secondary displays from lighting up or enabling certain features [How] Separated the new logic to be for DCN31 only and retained pre DCN31 logic for all other ASICs Reviewed-by:
Ahmad Othman <Ahmad.Othman@amd.com> Tested-by:
-
Ramesh Errabolu authored
MMIO/DOORBELL BOs encode control data and should be pinned in GTT domain before enabling PCIe connected peer devices in accessing it Signed-off-by:
Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by:
-
Ramesh Errabolu authored
Accounting system to track amount of available memory (system, TTM and VRAM of a device) relies on BO's domain. The change is to rely instead on allocation flag indicating BO type - VRAM, GTT, USERPTR, MMIO or DOORBELL Signed-off-by:
-
Leo (Hanghong) Ma authored
[Why & How] Dmesg errors are found on dcn3.1 during reset test, but it's not a really failure. So reduce it to a debug print. Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Reviewed-by:
-
Leo (Hanghong) Ma authored
[Why & How] It doesn't make sense to guard DC_LOG_DP2 by CONFIG_DRM_AMD_DCN, and this also caused build failure for allmodconfig; So drop the guard to fix the compile failure; Reviewed-by:
-
- 17 Nov, 2021 13 commits
-
-
Perry Yuan authored
add support that allow the userspace tool like RGP to get the GFX clock value at runtime, the fix follow the old way to show the min/current/max clocks level for compatible consideration. === Test === $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz * 1: 1100Mhz 2: 1600Mhz then run stress test on one APU system. $ cat /sys/class/drm/card0/device/pp_dpm_sclk 0: 200Mhz 1: 1040Mhz * 2: 1600Mhz The current GFXCLK value is updated at runtime. BugLink: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5260Reviewed-by:
Huang Ray <Ray.Huang@amd.com> Signed-off-by:
Perry Yuan <Perry.Yuan@amd.com> Signed-off-by:
-
Graham Sider authored
asic_family was a duplicate of asic_type, both of type amd_asic_type. Replace all instances of device_info->asic_family with adev->asic_type and remove asic_family from device_info. Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Reviewed-by:
-
Graham Sider authored
Switch to IP version checking instead of asic_type on various KFD version checks. Signed-off-by:
-
Graham Sider authored
Converts KFD switch statements to use IP version checking instead of asic_type. Signed-off-by:
-
Graham Sider authored
Defined as GC HWIP >= IP_VERSION(9, 0, 1). Also defines KFD_GC_VERSION to return GC HWIP version. Signed-off-by:
-
Guchun Chen authored
Driver initialization is driven by IP version from IP discovery table. So add error print when failing to add ip block during driver initialization, this will be more friendly to user to know which IP version is not correct. [ 40.467361] [drm] host supports REQ_INIT_DATA handshake [ 40.474076] [drm] add ip block number 0 <nv_common> [ 40.474090] [drm] add ip block number 1 <gmc_v10_0> [ 40.474101] [drm] add ip block number 2 <psp> [ 40.474103] [drm] add ip block number 3 <navi10_ih> [ 40.474114] [drm] add ip block number 4 <smu> [ 40.474119] [drm] add ip block number 5 <amdgpu_vkms> [ 40.474134] [drm] add ip block number 6 <gfx_v10_0> [ 40.474143] [drm] add ip block number 7 <sdma_v5_2> [ 40.474147] amdgpu 0000:00:08.0: amdgpu: Fatal error during GPU init [ 40.474545] amdgpu 0000:00:08.0: amdgpu: amdgpu: finishing device. v2: use dev_err to multi-GPU system Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
Luben Tuikov authored
Also print the message index and parameter of the stuck command. Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Acked-by:
-
ran jianping authored
Fix the following coccicheck review: ./drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c:1174:14-18 :Unneeded variable Remove unneeded variable used to store return value. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ran jianping <ran.jianping@zte.com.cn> Signed-off-by:
-
Xu Wang authored
Correct indentation in radeon_driver_load_kms. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Graham Sider authored
These get funcs simply return an adev field. Replace funcs/calls with direct field accesses instead. Signed-off-by:
-
Shirish S authored
update developers with next level of info about unsupported display configuration query that led to atomic check failure. Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alvin Lee authored
[Why] In DC we want to wait for the INBOX0 HW Lock command to ACK before continuing. This is to ensure that the lock has been successfully acquired before programming HW in DC. [How] Add interfaces to send messages on INBOX0, poll for their completation and clear the ack. Reviewed-by:
Anson Jacob <Anson.Jacob@amd.com> Tested-by:
Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by:
-
Jimmy Kizito authored
[Why] Link encoder assignment tracking variables need to be (re)initialised whenever dc_state is (re)initialised. Otherwise variables used for dynamic encoder assignment (especially the link encoder availability pool) are out of sync with dc_state and future encoder assignments are invalid. [How] Initialise encoder assignment variables when creating new dc_state resource. Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by:
-
