Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.

This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add check for the return value of the dma_alloc_coherent since
it may return NULL pointer if allocation fails.

Fixes: 4b2c53d9 ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221220024921.21992-1-jiasheng@iscas.ac.cn

The 'buf' variable is only used in the USB (if-path) and not in the Bluetooth
else-path. Since it is not set to NULL. this results in freeing an uninitialized
pointer. Since the else code-path doesn't need buf, just return 0.

Fixes: 2d77474a ("HID: playstation: add DualShock4 bluetooth support.")
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221213044935.1775499-2-roderick.colenbrander@sony.com

The MCP2221 driver should not connect to the hidraw userspace interface,
as it needs exclusive access to the chip.

If you want to use /dev/hidrawX with the MCP2221, you need to avoid
binding this driver to the device and use the hid generic driver instead
(e.g. using udev rules).

Cc: stable@vger.kernel.org
Reported-by: Sven Zühlsdorf <sven.zuehlsdorf@vigem.de>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221103222714.21566-2-Enrik.Berkhan@inka.de

The Force Feedback code assumes that all the devices passed to it will
be USB devices, but that might not be the case for emulated devices.
Guard against a crash by checking the device type before poking at USB
properties.

Cc: stable@vger.kernel.org # v5.16+
Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221215154416.111704-1-hadess@hadess.net

Pull HID updates from Jiri Kosina:

 - iio support for the MCP2221 HID driver (Matt Ranostay)

 - support for more than one hinge sensor in hid-sensor-custom (Yauhen
   Kharuzhy)

 - PS DualShock 4 controller support (Roderick Colenbrander)

 - XP-PEN Deco LW support (José Expósito)

 - other assorted code cleanups and device ID/quirk addtions

* tag 'for-linus-2022121301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (51 commits)
  HID: logitech HID++: Send SwID in GetProtocolVersion
  HID: hid-elan: use default remove for hid device
  HID: hid-alps: use default remove for hid device
  HID: hid-sensor-custom: set fixed size for custom attributes
  HID: i2c: let RMI devices decide what constitutes wakeup event
  HID: playstation: fix DualShock4 bluetooth CRC endian issue.
  HID: playstation: fix DualShock4 bluetooth memory corruption bug.
  HID: apple: Swap Control and Command keys on Apple keyboards
  HID: intel-ish-hid: ishtp: remove variable rb_count
  HID: uclogic: Standardize test name prefix
  HID: hid-sensor-custom: Allow more than one hinge angle sensor
  HID: ft260: fix 'cast to restricted' kernel CI bot warnings
  HID: ft260: missed NACK from busy device
  HID: ft260: fix a NULL pointer dereference in ft260_i2c_write
  HID: ft260: wake up device from power saving mode
  HID: ft260: missed NACK from big i2c read
  HID: ft260: remove SMBus Quick command support
  HID: ft260: skip unexpected HID input reports
  HID: ft260: do not populate /dev/hidraw device
  HID: ft260: improve i2c large reads performance
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for Cypress Generation 5 touchscreens

 - a new driver for Hynitron cstxxx touchscreens

 - a new driver for Himax hx83112b touchscreen

 - I2C input devices have been converted to use i2c's probe_new()

 - a large number of input devices are now using
   DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
   __maybe_unused annotations

 - improvements to msg2638 touchscreen driver to also support msg2138

 - conversion of several input deevine bindings to yaml/DT schema

 - changes to select touch drivers to move handling of wake irqs to the
   PM core

 - other assorted fixes and improvements.

* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
  Input: elants_i2c - delay longer with reset asserted
  dt-bindings: input: Convert ti,drv260x to DT schema
  dt-bindings: input: gpio-beeper: Convert to yaml schema
  Input: pxspad - fix unused data warning when force feedback not enabled
  Input: lpc32xx - allow building with COMPILE_TEST
  Input: nomadik-ske-keypad - allow building with COMPILE_TEST
  Input: pxa27xx-keypad - allow build with COMPILE_TEST
  Input: spear-keyboard - improve build coverage using COMPILE_TEST
  Input: tegra-kbc - allow build with COMPILE_TEST
  Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  ...

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Various LED binding conversions and clean-ups. Convert the
     ir-spi-led, pwm-ir-tx, and gpio-ir-tx LED bindings to schemas.
     Consistently reference LED common.yaml or multi-led schemas and
     disallow undefined properties.

   - Convert IDT 89HPESx, pwm-clock, st,stmipid02, Xilinx PCIe hosts,
     and fsl,imx-fb bindings to schema

   - Add ata-generic, Broadcom u-boot environment, and dynamic MTD
     sub-partitions bindings.

   - Make all SPI based displays reference spi-peripheral-props.yaml

   - Fix some schema property regex's which should be fixed strings or
     were missing start/end anchors

   - Remove 'status' in examples, again...

  DT Core:

   - Fix a possible NULL dereference in overlay functions

   - Fix kexec reading 32-bit "linux,initrd-{start,end}" values (which
     never worked)

   - Add of_address_count() helper to count number of 'reg' entries

   - Support .dtso extension for DT overlay source files. Rename staging
     and unittest overlay files.

   - Update dtc to upstream v1.6.1-63-g55778a03df61"

* tag 'devicetree-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (42 commits)
  dt-bindings: leds: Add missing references to common LED schema
  dt-bindings: leds: intel,lgm: Add missing 'led-gpios' property
  of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
  dt-bindings: lcdif: Fix constraints for imx8mp
  media: dt-bindings: atmel,isc: Drop unneeded unevaluatedProperties
  dt-bindings: Drop Jee Heng Sia
  dt-bindings: thermal: cooling-devices: Add missing cache related properties
  dt-bindings: leds: irled: ir-spi-led: convert to DT schema
  dt-bindings: leds: irled: pwm-ir-tx: convert to DT schema
  dt-bindings: leds: irled: gpio-ir-tx: convert to DT schema
  dt-bindings: leds: mt6360: rework to match multi-led
  dt-bindings: leds: lp55xx: rework to match multi-led
  dt-bindings: leds: lp55xx: switch to preferred 'gpios' suffix
  dt-bindings: leds: lp55xx: allow label
  dt-bindings: leds: use unevaluatedProperties for common.yaml
  dt-bindings: thermal: tsens: Add SM6115 compatible
  of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values
  dt-bindings: display: Convert fsl,imx-fb.txt to dt-schema
  dt-bindings: Add missing start and/or end of line regex anchors
  dt-bindings: qcom,pdc: Add missing compatibles
  ...

Merge tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Driver for OneXPlayer mini AMD sensors

   - Ampere's Altra smpro-hwmon driver

  New chip and attribute support in existing drivers:

   - nct6775: Support for ASUS CROSSHAIR VIII/TUF/ProArt B550M

   - pmbus/ltc2978: Support for LTC7132

   - aquacomputer_d5next: Support for temperature sensor offsets and
     flow sensor pulses

   - coretemp: Support for dynamic ttarget and tjmax

  Improvements:

   - Use devm_regulator_get_enable() where appropriate

   - Use sysfs_emit() instead of scnprintf()

   - Remove some useless #include <linux/hwmon-vid.h>

   - Include <linux/kstrtox.h> when appropriate

   - Use simple i2c probe

   - it87: Check for a valid chip before using force_id, and new new
     module parameter to ignore ACPI resource conflicts

   - jc42: Use regmap, and restore min/max/critical temperatures on
     resume

   - Add reporting power good and status to PMBus based regulators

  Last minute fixes:

   - emc2305: Fix probing of emc2301/2/3, and fix setting pwm values
     manually if THERMAL is enabled

  And various other minor fixes and improvements"

* tag 'hwmon-for-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (37 commits)
  hwmon: (emc2305) fix pwm never being able to set lower
  hwmon: (emc2305) fix unable to probe emc2301/2/3
  hwmon: (dell-smm) Move error message to make probing silent
  hwmon: use sysfs_emit() to instead of scnprintf()
  hwmon: (oxp-sensors) Fix pwm reading
  hwmon: (aquacomputer_d5next) Add support for Quadro flow sensor pulses
  hwmon: (pmbus/core) Implement regulator get_status
  hwmon: (oxp-sensors) Add AOK ZOE and Mini PRO
  hwmon: (gsc-hwmon) Switch to flexible array to simplify code
  hwmon: (pmbus) Add power good support
  hwmon: (nct6775) add ASUS CROSSHAIR VIII/TUF/ProArt B550M
  hwmon: (coretemp) Add support for dynamic ttarget
  hwmon: (coretemp) Add support for dynamic tjmax
  hwmon: (coretemp) rearrange tjmax handing code
  hwmon: Remove some useless #include <linux/hwmon-vid.h>
  hwmon: (coretemp) Remove obsolete temp_data->valid
  hwmon: add OneXPlayer mini AMD sensors driver
  hwmon: (aquacomputer_d5next) Clear up macros and comments
  hwmon: (it87) Add DMI table for future extensions
  hwmon: Include <linux/kstrtox.h> when appropriate
  ...

Pull pin control updates from Linus Walleij:
 "The two large chunks is the header clean-up from Andy and the Qualcomm
  DT bindings clean-up from Krzysztof. Each which could give rise to
  conflicts, but I haven't seen any.

  The YAML conversions happening around the device tree is the biggest
  item in the series and is the result of Rob Herrings ambition to
  autovalidate these trees against strict schemas and it is paying off
  in lots of bugs found and ever prettier device trees. Sooner or later
  the transition will be complete, Krzysztof is fixing up all of the
  Qualcomm stuff, which is pretty voluminous.

  Core changes:

   - minor but nice and important documentation clean-ups

  New drivers:

   - subdriver for the Qualcomm SDM670 SoC

   - subdriver for the Intel Moorefield SoC

   - trivial support for the NXP Freescale i.MXRT1170 SoC

  Other changes and improvements

   - major clean-up of the Qualcomm pin control device tree bindings by
     Krzysztof

   - major header clean-up by Andy

   - some immutable irqchip clean-up for the Actions Semiconductor and
     Nuvoton drivers

   - GPIO helpers for The Cypress cy8c95x0 driver

   - bias handling in the Mediatek MT7986 driver

   - remove the unused pins-are-numbered concept that never flew"

* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
  pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
  dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
  dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
  pinctrl: stm32: Remove check for pins-are-numbered
  pinctrl: mediatek: common: Remove check for pins-are-numbered
  pinctrl: qcom: remove duplicate included header files
  pinctrl: sunxi: d1: Add CAN bus pinmuxes
  pinctrl: loongson2: Fix some const correctness
  pinctrl: pinconf-generic: add missing of_node_put()
  pinctrl: intel: Enumerate PWM device when community has a capability
  pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
  pwm: lpss: Allow other drivers to enable PWM LPSS
  pwm: lpss: Include headers we are the direct user of
  pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
  pwm: Add a stub for devm_pwmchip_add()
  pinctrl: k210: call of_node_put()
  pinctrl: starfive: Use existing variable gpio
  dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
  pinconf-generic: fix style issues in pin_config_param doc
  pinctrl: pinctrl-loongson2: fix Kconfig dependency
  ...

Pull spi updates from Mark Brown:
 "A busy enough release, but not for the core which has only seen very
  small updates. The biggest addition is the readdition of support for
  detailed configuration of the timings around chip selects. That had
  been removed for lack of use but there's been applications found for
  it on Atmel systems. Otherwise the updates are mostly feature
  additions and cleanups to existing drivers.

  Summary:

   - Provide a helper for getting device match data in a way that
     abstracts away which firmware interface is being used.

   - Re-add the spi_set_cs_timing() API for detailed configuration of
     the timing around chip select and support it on Atmel.

   - Support for MediaTek MT7986, Microchip PCI1xxxx, Nuvoton WPCM450
     FIU and Socionext F_OSPI"

* tag 'spi-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
  spi: dt-bindings: Convert Synquacer SPI to DT schema
  spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
  spi: spi-mtk-nor: Add recovery mechanism for dma read timeout
  spi: spi-fsl-lpspi: add num-cs binding for lpspi
  spi: spi-fsl-lpspi: support multiple cs for lpspi
  spi: mtk-snfi: Add snfi support for MT7986 IC
  spi: spidev: mask SPI_CS_HIGH in SPI_IOC_RD_MODE
  spi: cadence-quadspi: Add minimum operable clock rate warning to baudrate divisor calculation
  spi: microchip: pci1xxxx: Add suspend and resume support for PCI1XXXX SPI driver
  spi: dt-bindings: nuvoton,wpcm450-fiu: Fix warning in example (missing reg property)
  spi: dt-bindings: nuvoton,wpcm450-fiu: Fix error in example (bogus include)
  spi: mediatek: Enable irq when pdata is ready
  spi: spi-mtk-nor: Unify write buffer on/off
  spi: intel: Add support for SFDP opcode
  spi: intel: Take possible chip address into account in intel_spi_read/write_reg()
  spi: intel: Implement adjust_op_size()
  spi: intel: Use ->replacement_op in intel_spi_hw_cycle()
  spi: cadence: Drop obsolete dependency on COMPILE_TEST
  spi: Add Nuvoton WPCM450 Flash Interface Unit (FIU) bindings
  spi: wpcm-fiu: Add direct map support
  ...

Pull regulator updates from Mark Brown:
 "Quite a quiet release for regulator, the diffstat is dominated by the
  I2C migration to probe_new() and the newly added MT6357 driver. We've
  just one framework addition and the rest is all new device support,
  fixes and cleanups.

  The framework addition is an API for requesting all regulators defined
  in DT, this isn't great practice but has reasonable applications when
  there is generic code handling devices on buses where the bus
  specification doesn't include power. The immediate application is MDIO
  but I believe there's others, it's another API that'll need an eye
  keeping on it for undesirable usage.

  Summary:

    - An API for requesting all regulators defined in DT

    - Conversion of lots of drivers to the I2C probe_new() API

    - Support for Mediatek MT6357, Qualcomm PM8550, PMR735a and Richtek
      RT6190"

* tag 'regulator-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (56 commits)
  regulator: core: Use different devices for resource allocation and DT lookup
  dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes
  regulator: qcom-labibb: Fix missing of_node_put() in qcom_labibb_regulator_probe()
  regulator: add mt6357 regulator
  regulator: dt-bindings: Add binding schema for mt6357 regulators
  regulator: core: fix resource leak in regulator_register()
  regulator: core: fix module refcount leak in set_supply()
  regulator: core: fix use_count leakage when handling boot-on
  regulator: rk808: Use dev_err_probe
  regulator: rk808: reduce 'struct rk808' usage
  regulator: Drop obsolete dependencies on COMPILE_TEST
  regulator: pv88080-regulator: Convert to i2c's .probe_new()
  regulator: pfuze100-regulator: Convert to i2c's .probe_new()
  regulator: isl6271a-regulator: Convert to i2c's .probe_new()
  regulator: fan53555: Convert to i2c's .probe_new()
  regulator: act8865-regulator: Convert to i2c's .probe_new()
  regulator: qcom-rpmh: Add support for PM8550 regulators
  regulator: dt-bindings: qcom,rpmh: Add compatible for PM8550
  regulator: tps65023-regulator: Convert to i2c's .probe_new()
  regulator: tps62360-regulator: Convert to i2c's .probe_new()
  ...

Pull regmap updates from Mark Brown:
 "A few new APIs here, support for the FSI bus (which is used in some
  PowerPC systems) plus a couple of new APIs, one allowing abstractions
  built on top of regmap to tell if the regmap can be used in an atomic
  context and one providing a callback for an in flight device which
  can't do interrupt masking very well.

  There's also a fix that I never got round to sending because it really
  should be fixed better but that's not happened yet and it does avoid
  the problem, the fix was in -next for a long time"

* tag 'regmap-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap-irq: Add handle_mask_sync() callback
  regmap: Add FSI bus support
  regmap: add regmap_might_sleep()
  regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode

Pull mtd updates from Miquel Raynal:
 "MTD core changes:
   - Fix refcount error in del_mtd_device()
   - Fix possible resource leak in init_mtd()
   - Set ROOT_DEV for partitions marked as rootfs in DT
   - Describe marking rootfs partitions in the bindings
   - Fix device name leak when register device fails in add_mtd_device()
   - Try to find OF node for every MTD partition
   - simplify (a bit) code find partition-matching dynamic OF node

  MTD driver changes:
   - pxa2xx-flash maps: fix memory leak in probe
   - BCM parser: refer to ARCH_BCMBCA instead of ARCH_BCM4908
   - lpddr2_nvm: Fix possible null-ptr-deref
   - inftlcore: fix repeated words in comments
   - lart: remove driver
   - tplink:
      - Add TP-Link SafeLoader partitions table parser and bindings
      - Describe TP-Link SafeLoader parser
      - Describe TP-Link SafeLoader dynamic subpartitions
   - mtdoops:
      - Panic caused mtdoops to call mtdoops_erase function immediately
      - Add mtdoops_erase function and move mtdoops_inc_counter after it
      - Change printk() to counterpart pr_ functions

  MTD binding cleanup:
   - Fixed-partitions: Fix 'sercomm,scpart-id' schema
   - Standardize the style in the examples
   - Drop object types when referencing other files
   - Argue in favor of keeping additionalProperties set to true
   - NVMEM-cells:
      - Inherit from MTD partitions
      - Drop range property from example
   - Partitions:
      - Change qcom,smem-part partition type
      - Constrain the list of parsers
   - Physmap: Reuse the generic definitions
   - SPI-NOR: Drop common properties
   - Sunxi-nand: Add an example to validate the bindings
   - Onenand: Mention the expected node name
   - Ingenic: Mark partitions in the controller node as deprecated
   - NAND:
      - Standardize the child node name
      - Drop common properties already defined in generic files
      - nand-chip.yaml should reference mtd.yaml
   - Remove useless file about partitions
   - Clarify all partition subnodes

  SPI NOR core changes:
   - Add support for flash reset using the dt reset-gpios property.
   - Update hwcaps.mask to include 8D-8D-8D read and page program ops
     when xSPI profile 1.0 table is defined.
   - Bypass zero erase size in spi_nor_find_best_erase_type().
   - Fix select_uniform_erase to skip 0 erase size
   - Add generic flash driver. If a flash is not found in the flash_info
     array, fall back to the generic flash driver which is described
     solely by the flash's SFDP tables.
   - Fix the number of bytes for the dummy cycles in
     spi_nor_spimem_check_readop().
   - Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP
     discoverable.

  SPI NOR manufacturer drivers changes:
   - Spansion:
      - use PARSE_SFDP for s28hs512t,
      - add support for s28hl512t, s28hl01gt, and s28hs01gt.
   - Gigadevice: Replace default_init() with post_bfpt() for gd25q256.
   - Micron - ST: Enable locking for mt25qu256a.
   - Winbond: Add support for W25Q512NW-IQ.
   - ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP.

  Raw NAND core changes:
   - Drop obsolete dependencies on COMPILE_TEST
   - MAINTAINERS: rectify entry for MESON NAND controller bindings
   - Drop EXPORT_SYMBOL_GPL for nanddev_erase()

  Raw NAND driver changes:
   - marvell: Enable NFC/DEVBUS arbiter
   - gpmi: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync
   - mpc5121: Replace NO_IRQ by 0
   - lpc32xx_{slc,mlc}:
      - Switch to using pm_ptr()
      - Switch to using gpiod API
   - lpc32xx_mlc: Switch to using pm_ptr()
   - cadence: Support 64-bit slave dma interface
   - rockchip: Describe rk3128-nfc in the bindings
   - brcmnand: Update interrupts description in the bindings

  SPI-NAND driver changes:
   - winbond:
      - Add Winbond W25N02KV flash support
      - Fix flash identification"

* tag 'mtd/for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
  mtd: rawnand: Drop obsolete dependencies on COMPILE_TEST
  mtd: maps: pxa2xx-flash: fix memory leak in probe
  mtd: core: Fix refcount error in del_mtd_device()
  mtd: spi-nor: add SFDP fixups for Quad Page Program
  mtd: spi-nor: issi: is25wp256: Init flash based on SFDP
  mtd: spi-nor: winbond: add support for W25Q512NW-IQ
  mtd: spi-nor: micron-st: Enable locking for mt25qu256a
  mtd: spi-nor: Fix the number of bytes for the dummy cycles
  mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt
  mtd: spi-nor: Fix formatting in spi_nor_read_raw() kerneldoc comment
  mtd: spi-nor: sysfs: print JEDEC ID for generic flash driver
  mtd: spi-nor: add generic flash driver
  mtd: spi-nor: fix select_uniform_erase to skip 0 erase size
  mtd: spi-nor: move function declaration out of sfdp.h
  mtd: spi-nor: remember full JEDEC flash ID
  mtd: spi-nor: sysfs: hide manufacturer if it is not set
  mtd: spi-nor: hide jedec_id sysfs attribute if not present
  mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()
  mtd: rawnand: marvell: Enable NFC/DEVBUS arbiter
  mtd: parsers: refer to ARCH_BCMBCA instead of ARCH_BCM4908
  ...

Pull drm updates from Dave Airlie:
 "The biggest highlight is that the accel subsystem framework is merged.
  Hopefully for 6.3 we will be able to line up a driver to use it.

  In drivers land, i915 enables DG2 support by default now, and nouveau
  has a big stability refactoring and initial ampere support, AMD
  includes new hw IP support and should build on ARM again. There is
  also an ofdrm driver to take over offb on platforms it's used.

  Stuff outside my tree, the dma-buf patches hit a few places, the vc4
  firmware changes also do, and i915 has some interactions with MEI for
  discrete GPUs. I think all of those should have been acked/reviewed by
  relevant parties.

  New driver:
   - ofdrm - replacement for offb

  fbdev:
   - add support for nomodeset

  fourcc:
   - add Vivante tiled modifier

  core:
   - atomic-helpers: CRTC primary plane test fixes, fb access hooks
   - connector: TV API consistency, cmdline parser improvements
   - send connector hotplug on cleanup
   - sort makefile objects

  tests:
   - sort kunit tests
   - improve DP-MST tests
   - add kunit helpers to create a device

  sched:
   - module param for scheduling policy
   - refcounting fix

  buddy:
   - add back random seed log

  ttm:
   - convert ttm_resource to size_t
   - optimize pool allocations

  edid:
   - HFVSDB parsing support fixes
   - logging/debug improvements
   - DSC quirks

  dma-buf:
   - Add unlocked vmap and attachment mapping
   - move drivers to common locking convention
   - locking improvements

  firmware:
   - new API for rPI firmware and vc4

  xilinx:
   - zynqmp: displayport bridge support
   - dpsub fix

  bridge:
   - adv7533: Remove dynamic lane switching
   - it6505: Runtime PM support, sync improvements
   - ps8640: Handle AUX defer messages
   - tc358775: Drop soft-reset over I2C

  panel:
   - panel-edp: Add INX N116BGE-EA2 C2 and C4 support.
   - Jadard JD9365DA-H3
   - NewVision NV3051D

  amdgpu:
   - DCN support on ARM
   - DCN 2.1 secure display
   - Sienna Cichlid mode2 reset fixes
   - new GC 11.x firmware versions
   - drop AMD specific DSC workarounds in favour of drm code
   - clang warning fixes
   - scheduler rework
   - SR-IOV fixes
   - GPUVM locking fixes
   - fix memory leak in CS IOCTL error path
   - flexible array updates
   - enable new GC/PSP/SMU/NBIO IP
   - GFX preemption support for gfx9

  amdkfd:
   - cache size fixes
   - userptr fixes
   - enable cooperative launch on gfx 10.3
   - enable GC 11.0.4 KFD support

  radeon:
   - replace kmap with kmap_local_page
   - ACPI ref count fix
   - HDA audio notifier support

  i915:
   - DG2 enabled by default
   - MTL enablement work
   - hotplug refactoring
   - VBT improvements
   - Display and watermark refactoring
   - ADL-P workaround
   - temp disable runtime_pm for discrete-
   - fix for A380 as a secondary GPU
   - Wa_18017747507 for DG2
   - CS timestamp support fixes for gen5 and earlier
   - never purge busy TTM objects
   - use i915_sg_dma_sizes for all backends
   - demote GuC kernel contexts to normal priority
   - gvt: refactor for new MDEV interface
   - enable DC power states on eDP ports
   - fix gen 2/3 workarounds

  nouveau:
   - fix page fault handling
   - Ampere acceleration support
   - driver stability improvements
   - nva3 backlight support

  msm:
   - MSM_INFO_GET_FLAGS support
   - DPU: XR30 and P010 image formats
   - Qualcomm SM6115 support
   - DSI PHY support for QCM2290
   - HDMI: refactored dev init path
   - remove exclusive-fence hack
   - fix speed-bin detection
   - enable clamp to idle on 7c3
   - improved hangcheck detection

  vmwgfx:
   - fb and cursor refactoring
   - convert to generic hashtable
   - cursor improvements

  etnaviv:
   - hw workarounds
   - softpin MMU fixes

  ast:
   - atomic gamma LUT support
   - convert to SHMEM

  lcdif:
   - support YUV planes
   - Increase DMA burst size
   - FIFO threshold tuning

  meson:
   - fix return type of cvbs mode_valid

  mgag200:
   - fix PLL setup on some revisions

  sun4i:
   - A100 and D1 support

  udl:
   - modesetting improvements
   - hot unplug support

  vc4:
   - support PAL-M
   - fix regression preventing 4K @ 60Hz
   - fix NULL ptr deref

  v3d:
   - switch to drm managed resources

  renesas:
   - RZ/G2L DSI support
   - DU Kconfig cleanup

  mediatek:
   - fixup dpi and hdmi
   - MT8188 dpi support
   - MT8195 AFBC support

  tegra:
   - NVDEC hardware on Tegra234 SoC

  hdlcd:
   - switch to drm managed resources

  ingenic:
   - fix registration error path

  hisilicon:
   - convert to drm_mode_init

  maildp:
   - use managed resources

  mtk:
   - use drm_mode_init

  rockchip:
   - use drm_mode_copy"

* tag 'drm-next-2022-12-13' of git://anongit.freedesktop.org/drm/drm: (1397 commits)
  drm/amdgpu: fix mmhub register base coding error
  drm/amdgpu: add tmz support for GC IP v11.0.4
  drm/amdgpu: enable GFX Clock Gating control for GC IP v11.0.4
  drm/amdgpu: enable GFX Power Gating for GC IP v11.0.4
  drm/amdgpu: enable GFX IP v11.0.4 CG support
  drm/amdgpu: Make amdgpu_ring_mux functions as static
  drm/amdgpu: generally allow over-commit during BO allocation
  drm/amd/display: fix array index out of bound error in DCN32 DML
  drm/amd/display: 3.2.215
  drm/amd/display: set optimized required for comp buf changes
  drm/amd/display: Add debug option to skip PSR CRTC disable
  drm/amd/display: correct DML calc error of UrgentLatency
  drm/amd/display: correct static_screen_event_mask
  drm/amd/display: Ensure commit_streams returns the DC return code
  drm/amd/display: read invalid ddc pin status cause engine busy
  drm/amd/display: Bypass DET swath fill check for max clocks
  drm/amd/display: Disable uclk pstate for subvp pipes
  drm/amd/display: Fix DCN2.1 default DSC clocks
  drm/amd/display: Enable dp_hdmi21_pcon support
  drm/amd/display: prevent seamless boot on displays that don't have the preferred dig
  ...

Pull media updates from Mauro Carvalho Chehab:

 - DVB core changes to avoid refcount troubles and UAF

 - DVB API/core has gained support for DVB-C2 and DVB-S2X

 - New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c

 - Removal of an unused sensor driver: s5k4ecgx

 - Move microchip_csi2dc to a new directory, named after the
   manufacturer

 - Add media controller support to Microship drivers

 - Old Atmel/Microship drivers that don't use media controler got moved
   to staging

 - New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support

 - Allwinner A31 camera sensor driver code was now split into a bridge
   and a separate processor driver

 - Added a virtual stateless decoder driver in order to test core
   support for stateless drivers and test userspace apps using it

 - removed platform-based support for ov9650, as this is not used
   anymore

 - atomisp now uses videobuf2 and supports normal mmap mode

 - the imx7-media-csi driver got promoted from staging

 - rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)

 - most i2c drivers now use I2C .probe_new() kAPI

 - lots of drivers fixes, cleanups and improvements

* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
  media: s5c73m3: Switch to GPIO descriptors
  media: i2c: s5k5baf: switch to using gpiod API
  media: i2c: s5k6a3: switch to using gpiod API
  media: imx: remove code for non-existing config IMX_GPT_ICAP
  media: si470x: Fix use-after-free in si470x_int_in_callback()
  media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
  media: coda: Add check for kmalloc
  media: coda: Add check for dcoda_iram_alloc
  dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
  media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
  media: s5k4ecgx: Delete driver
  media: s5k4ecgx: Switch to GPIO descriptors
  media: Switch to use dev_err_probe() helper
  headers: Remove some left-over license text in include/uapi/linux/v4l2-*
  headers: Remove some left-over license text in include/uapi/linux/dvb/
  media: usb: pwc-uncompress: Use flex array destination for memcpy()
  media: s5p-mfc: Fix to handle reference queue during finishing
  media: s5p-mfc: Clear workbit to handle error condition
  media: s5p-mfc: Fix in register read and write for H264
  media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
  ...

Pull sound updates from Takashi Iwai:
 "This looks like a relatively calm development cycle; there have been
  only few changes in ALSA and ASoC core sides while we get lots of
  device-specific fixes and updates as usual. Most of commits are about
  ASoC, including Intel SOF/AVS and many device tree updates.

  Below are some highlights:

  Core:
   - Improvement in memalloc helper for fallback allocations
   - More cleanups of ASoC DAPM code

  ASoC:
   - Factoring out of mapping hw_params onto SoundWire configuration
   - The ever ongoing overhauls of the Intel DSP code continue,
     including support for loading libraries and probes with IPC4 on
     SOF.
   - Support for more sample formats on JZ4740
   - Lots of device tree conversions and fixups
   - Support for Allwinner D1, a range of AMD and Intel systems,
     Mediatek systems with multiple DMICs, Nuvoton NAU8318, NXP
     fsl_rpmsg and i.MX93, Qualcomm AudioReach Enable, MFC and SAL,
     RealTek RT1318 and Rockchip RK3588

  ALSA:
   - Addition of PCM kselftest; still minimalistic but can be extended
     in future
   - Fixes for corner-case XRUNs with USB-audio implicit feedback mode
   - Usual device-specific quirk updates for USB- and HD-audio
   - FireWire DICE updates

  This also contains a few cross-tree updates:
   - Some OMAP board file updates for removal of relevant OMAP platforms
   - A new I2C API update for I2C probe API adaption
   - A DRM update for the further hdmi-codec updates"

* tag 'sound-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (417 commits)
  ALSA: mts64: fix possible null-ptr-defer in snd_mts64_interrupt
  ALSA: patch_realtek: Fix Dell Inspiron Plus 16
  ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.
  ASoC: dt-bindings: Correct Alexandre Belloni email
  ASoC: dt-bindings: maxim,max98504: Convert to DT schema
  ASoC: dt-bindings: maxim,max98357a: Convert to DT schema
  ASoC: dt-bindings: Reference common DAI properties
  ASoC: dt-bindings: Extend name-prefix.yaml into common DAI properties
  ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const
  ASoC: uniphier: aio-core: Make some read-only arrays static const
  ASoC: wcd938x: Make read-only array minCode_param static const
  ASoC: qcom: lpass-sc7280: Add maybe_unused tag for system PM ops
  ASoC : SOF: amd: Add support for IPC and DSP dumps
  ASoC: SOF: amd: Use poll function instead to read ACP_SHA_DSP_FW_QUALIFIER
  ALSA: usb-audio: Workaround for XRUN at prepare
  ALSA: pcm: Handle XRUN at trigger START
  ALSA: pcm: Set missing stop_operating flag at undoing trigger start
  drm: tda99x: Don't advertise non-existent capture support
  ASoC: hdmi-codec: Allow playback and capture to be disabled
  kselftest/alsa: Add more coverage of sample rates and channel counts
  ...

Merge tag 'for-6.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Fix use-after-free races due to missing resource cleanup during DM
   target destruction in DM targets: thin-pool, cache, integrity and
   clone.

 - Fix ABBA deadlocks in DM thin-pool and cache targets due to their use
   of a bufio client (that has a shrinker whose locking can cause the
   incorrect locking order).

 - Fix DM cache target to set its needs_check flag after first aborting
   the metadata (whereby using reset persistent-data objects to update
   the superblock with, otherwise the superblock update could be dropped
   due to aborting metadata). This was found with code-inspection when
   comparing with the equivalent in DM thinp code.

 - Fix DM thin-pool's presume to continue resuming the device even if
   the pool in is fail mode -- otherwise bios may never be failed up the
   IO stack (which will prevent resetting the thin-pool target via table
   reload)

 - Fix DM thin-pool's metadata to use proper btree root (from previous
   transaction) if metadata commit failed.

 - Add 'waitfor' module param to DM module (dm_mod) to allow dm-init to
   wait for the specified device before continuing with its DM target
   initialization.

* tag 'for-6.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: Use last transaction's pmd->root when commit failed
  dm init: add dm-mod.waitfor to wait for asynchronously probed block devices
  dm ioctl: fix a couple ioctl codes
  dm ioctl: a small code cleanup in list_version_get_info
  dm thin: resume even if in FAIL mode
  dm cache: set needs_check flag after aborting metadata
  dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort
  dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata
  dm integrity: Fix UAF in dm_integrity_dtr()
  dm cache: Fix UAF in destroy()
  dm clone: Fix UAF in clone_dtr()
  dm thin: Fix UAF in run_timer_softirq()

Pull ata updates from Damien Le Moal:
 "The ususal set of driver fixes and improvements as well as several
  patches improving libata core in preparation of the introduction of
  the support for the command duration limits feature. In more details:

   - Define the missing COMPLETED sense key in scsi header (me)

   - Several patches to improve libata handling of the status of
     completed commands and the retry and sense data reported to the
     scsi layer for failed commands. In particular, this widen the
     support for NCQ autosense to all drives that support this feature
     instead of restricting this feature use to ZAC drives only (Niklas)

   - Cleanup of the pata_mpc52xx and sata_dwc_460ex drivers to remove
     the use of the deprecated NO_IRQ macro (Christophe)

   - Fix build dedependency on OF vs use of the of_match_ptr() macro to
     avoid build errors with the sata_gemini and pata_ftide010 drivers
     (me)

   - Some libata cleanups using the new helper function
     ata_port_is_frozen() (Niklas)

   - Improve internal command handling by not retrying commands that
     failed with a timeout (Niklas)

   - Remove code for several unused libata helper functions (from
     Niklas)

   - Remove the palmchip pata_bk3710 driver. A couple of other driver
     removal should come in through the arm tree pull request (from
     Arnd)

   - Remove unused variable and function in the sata_dwc_460ex driver
     and libata-sff code (Colin and Sergey)

   - Minor cleanup of the pata_ep93xx driver platform code (from
     Minghao)

   - Remove the unnecessary linux/msi.h include from the ahci driver
     (Thomas)

   - Changes to libata enum constants definitions to avoid warnings with
     gcc-13 (Arnd)"

* tag 'ata-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (24 commits)
  ata: ahci: fix enum constants for gcc-13
  ata: libata: fix commands incorrectly not getting retried during NCQ error
  ata: ahci: Remove linux/msi.h include
  ata: sata_dwc_460ex: Check !irq instead of irq == NO_IRQ
  ata: pata_ep93xx: use devm_platform_get_and_ioremap_resource()
  ata: libata-sff: kill unused ata_sff_busy_sleep()
  ata: sata_dwc_460ex: remove variable num_processed
  ata: remove palmchip pata_bk3710 driver
  ata: remove unused helper ata_id_flush_ext_enabled()
  ata: remove unused helper ata_id_flush_enabled()
  ata: remove unused helper ata_id_lba48_enabled()
  ata: libata-core: do not retry reading the log on timeout
  scsi: libsas: make use of ata_port_is_frozen() helper
  ata: make use of ata_port_is_frozen() helper
  ata: add ata_port_is_frozen() helper
  ata: pata_ftide010: Remove build dependency on OF
  ata: sata_gemini: Remove dependency on OF for compile tests
  ata: pata_mpc52xx: Replace NO_IRQ with 0
  ata: libahci: read correct status and error field for NCQ commands
  ata: libata: fetch sense data for ATA devices supporting sense reporting
  ...

Pull block updates from Jens Axboe:

 - NVMe pull requests via Christoph:
      - Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
        Joshi)
      - Refactor PCIe probing and reset (Christoph Hellwig)
      - Various fabrics authentication fixes and improvements (Sagi
        Grimberg)
      - Avoid fallback to sequential scan due to transient issues (Uday
        Shankar)
      - Implement support for the DEAC bit in Write Zeroes (Christoph
        Hellwig)
      - Allow overriding the IEEE OUI and firmware revision in configfs
        for nvmet (Aleksandr Miloserdov)
      - Force reconnect when number of queue changes in nvmet (Daniel
        Wagner)
      - Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
        Grimberg, Christoph Hellwig, Christophe JAILLET)
      - Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
      - Use the common tagset helpers in nvme-pci driver (Christoph
        Hellwig)
      - Cleanup the nvme-pci removal path (Christoph Hellwig)
      - Use kstrtobool() instead of strtobool (Christophe JAILLET)
      - Allow unprivileged passthrough of Identify Controller (Joel
        Granados)
      - Support io stats on the mpath device (Sagi Grimberg)
      - Minor nvmet cleanup (Sagi Grimberg)

 - MD pull requests via Song:
      - Code cleanups (Christoph)
      - Various fixes

 - Floppy pull request from Denis:
      - Fix a memory leak in the init error path (Yuan)

 - Series fixing some batch wakeup issues with sbitmap (Gabriel)

 - Removal of the pktcdvd driver that was deprecated more than 5 years
   ago, and subsequent removal of the devnode callback in struct
   block_device_operations as no users are now left (Greg)

 - Fix for partition read on an exclusively opened bdev (Jan)

 - Series of elevator API cleanups (Jinlong, Christoph)

 - Series of fixes and cleanups for blk-iocost (Kemeng)

 - Series of fixes and cleanups for blk-throttle (Kemeng)

 - Series adding concurrent support for sync queues in BFQ (Yu)

 - Series bringing drbd a bit closer to the out-of-tree maintained
   version (Christian, Joel, Lars, Philipp)

 - Misc drbd fixes (Wang)

 - blk-wbt fixes and tweaks for enable/disable (Yu)

 - Fixes for mq-deadline for zoned devices (Damien)

 - Add support for read-only and offline zones for null_blk
   (Shin'ichiro)

 - Series fixing the delayed holder tracking, as used by DM (Yu,
   Christoph)

 - Series enabling bio alloc caching for IRQ based IO (Pavel)

 - Series enabling userspace peer-to-peer DMA (Logan)

 - BFQ waker fixes (Khazhismel)

 - Series fixing elevator refcount issues (Christoph, Jinlong)

 - Series cleaning up references around queue destruction (Christoph)

 - Series doing quiesce by tagset, enabling cleanups in drivers
   (Christoph, Chao)

 - Series untangling the queue kobject and queue references (Christoph)

 - Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
   Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)

* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
  blktrace: Fix output non-blktrace event when blk_classic option enabled
  block: sed-opal: Don't include <linux/kernel.h>
  sed-opal: allow using IOC_OPAL_SAVE for locking too
  blk-cgroup: Fix typo in comment
  block: remove bio_set_op_attrs
  nvmet: don't open-code NVME_NS_ATTR_RO enumeration
  nvme-pci: use the tagset alloc/free helpers
  nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
  nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
  nvme: consolidate setting the tagset flags
  nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
  block: bio_copy_data_iter
  nvme-pci: split out a nvme_pci_ctrl_is_dead helper
  nvme-pci: return early on ctrl state mismatch in nvme_reset_work
  nvme-pci: rename nvme_disable_io_queues
  nvme-pci: cleanup nvme_suspend_queue
  nvme-pci: remove nvme_pci_disable
  nvme-pci: remove nvme_disable_admin_queue
  nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
  nvme: use nvme_wait_ready in nvme_shutdown_ctrl
  ...

Pull io_uring updates part two from Jens Axboe:

 - Misc fixes (me, Lin)

 - Series from Pavel extending the single task exclusive ring mode,
   yielding nice improvements for the common case of having a single
   ring per thread (Pavel)

 - Cleanup for MSG_RING, removing our IOPOLL hack (Pavel)

 - Further poll cleanups and fixes (Pavel)

 - Misc cleanups and fixes (Pavel)

* tag 'for-6.2/io_uring-next-2022-12-08' of git://git.kernel.dk/linux: (22 commits)
  io_uring/msg_ring: flag target ring as having task_work, if needed
  io_uring: skip spinlocking for ->task_complete
  io_uring: do msg_ring in target task via tw
  io_uring: extract a io_msg_install_complete helper
  io_uring: get rid of double locking
  io_uring: never run tw and fallback in parallel
  io_uring: use tw for putting rsrc
  io_uring: force multishot CQEs into task context
  io_uring: complete all requests in task context
  io_uring: don't check overflow flush failures
  io_uring: skip overflow CQE posting for dying ring
  io_uring: improve io_double_lock_ctx fail handling
  io_uring: dont remove file from msg_ring reqs
  io_uring: reshuffle issue_flags
  io_uring: don't reinstall quiesce node for each tw
  io_uring: improve rsrc quiesce refs checks
  io_uring: don't raw spin unlock to match cq_lock
  io_uring: combine poll tw handlers
  io_uring: improve poll warning handling
  io_uring: remove ctx variable in io_poll_check_events
  ...

Pull io_uring updates from Jens Axboe:

 - Always ensure proper ordering in case of CQ ring overflow, which then
   means we can remove some work-arounds for that (Dylan)

 - Support completion batching for multishot, greatly increasing the
   efficiency for those (Dylan)

 - Flag epoll/eventfd wakeups done from io_uring, so that we can easily
   tell if we're recursing into io_uring again.

   Previously, this would have resulted in repeated multishot
   notifications if we had a dependency there. That could happen if an
   eventfd was registered as the ring eventfd, and we multishot polled
   for events on it. Or if an io_uring fd was added to epoll, and
   io_uring had a multishot request for the epoll fd.

   Test cases here:
	https://git.kernel.dk/cgit/liburing/commit/?id=919755a7d0096fda08fb6d65ac54ad8d0fe027cd

   Previously these got terminated when the CQ ring eventually
   overflowed, now it's handled gracefully (me).

 - Tightening of the IOPOLL based completions (Pavel)

 - Optimizations of the networking zero-copy paths (Pavel)

 - Various tweaks and fixes (Dylan, Pavel)

* tag 'for-6.2/io_uring-2022-12-08' of git://git.kernel.dk/linux: (41 commits)
  io_uring: keep unlock_post inlined in hot path
  io_uring: don't use complete_post in kbuf
  io_uring: spelling fix
  io_uring: remove io_req_complete_post_tw
  io_uring: allow multishot polled reqs to defer completion
  io_uring: remove overflow param from io_post_aux_cqe
  io_uring: add lockdep assertion in io_fill_cqe_aux
  io_uring: make io_fill_cqe_aux static
  io_uring: add io_aux_cqe which allows deferred completion
  io_uring: allow defer completion for aux posted cqes
  io_uring: defer all io_req_complete_failed
  io_uring: always lock in io_apoll_task_func
  io_uring: remove iopoll spinlock
  io_uring: iopoll protect complete_post
  io_uring: inline __io_req_complete_put()
  io_uring: remove io_req_tw_post_queue
  io_uring: use io_req_task_complete() in timeout
  io_uring: hold locks for io_req_complete_failed
  io_uring: add completion locking for iopoll
  io_uring: kill io_cqring_ev_posted() and __io_cq_unlock_post()
  ...

Pull iomap update from Darrick Wong:

 - Minor code cleanup to eliminate unnecessary bit shifting

* tag 'iomap-6.2-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: directly use logical block size

Pull vfs remap_range update from Darrick Wong:

 - Make some minor adjustments to the remap range preparation function
   to skip file updates when the request length is adjusted downwards to
   zero.

* tag 'vfs-6.2-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs/remap_range: avoid spurious writeback on zero length request

Merge tag 'fs.xattr.simple.rework.rbtree.rwlock.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping

Pull simple-xattr updates from Christian Brauner:
 "This ports the simple xattr infrastucture to rely on a simple rbtree
  protected by a read-write lock instead of a linked list protected by a
  spinlock.

  A while ago we received reports about scaling issues for filesystems
  using the simple xattr infrastructure that also support setting a
  larger number of xattrs. Specifically, cgroups and tmpfs.

  Both cgroupfs and tmpfs can be mounted by unprivileged users in
  unprivileged containers and root in an unprivileged container can set
  an unrestricted number of security.* xattrs and privileged users can
  also set unlimited trusted.* xattrs. A few more words on further that
  below. Other xattrs such as user.* are restricted for kernfs-based
  instances to a fairly limited number.

  As there are apparently users that have a fairly large number of
  xattrs we should scale a bit better. Using a simple linked list
  protected by a spinlock used for set, get, and list operations doesn't
  scale well if users use a lot of xattrs even if it's not a crazy
  number.

  Let's switch to a simple rbtree protected by a rwlock. It scales way
  better and gets rid of the perf issues some people reported. We
  originally had fancier solutions even using an rcu+seqlock protected
  rbtree but we had concerns about being to clever and also that
  deletion from an rbtree with rcu+seqlock isn't entirely safe.

  The rbtree plus rwlock is perfectly fine. By far the most common
  operation is getting an xattr. While setting an xattr is not and
  should be comparatively rare. And listxattr() often only happens when
  copying xattrs between files or together with the contents to a new
  file.

  Holding a lock across listxattr() is unproblematic because it doesn't
  list the values of xattrs. It can only be used to list the names of
  all xattrs set on a file. And the number of xattr names that can be
  listed with listxattr() is limited to XATTR_LIST_MAX aka 65536 bytes.
  If a larger buffer is passed then vfs_listxattr() caps it to
  XATTR_LIST_MAX and if more xattr names are found it will return
  -E2BIG. In short, the maximum amount of memory that can be retrieved
  via listxattr() is limited and thus listxattr() bounded.

  Of course, the API is broken as documented on xattr(7) already. While
  I have no idea how the xattr api ended up in this state we should
  probably try to come up with something here at some point. An iterator
  pattern similar to readdir() as an alternative to listxattr() or
  something else.

  Right now it is extremly strange that users can set millions of xattrs
  but then can't use listxattr() to know which xattrs are actually set.
  And it's really trivial to do:

	for i in {1..1000000}; do setfattr -n security.$i -v $i ./file1; done

  And around 5000 xattrs it's impossible to use listxattr() to figure
  out which xattrs are actually set. So I have suggested that we try to
  limit the number of xattrs for simple xattrs at least. But that's a
  future patch and I don't consider it very urgent.

  A bonus of this port to rbtree+rwlock is that we shrink the memory
  consumption for users of the simple xattr infrastructure.

  This also adds kernel documentation to all the functions"

* tag 'fs.xattr.simple.rework.rbtree.rwlock.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
  xattr: use rbtree for simple_xattrs

Pull lsm updates from Paul Moore:

 - Improve the error handling in the device cgroup such that memory
   allocation failures when updating the access policy do not
   potentially alter the policy.

 - Some minor fixes to reiserfs to ensure that it properly releases
   LSM-related xattr values.

 - Update the security_socket_getpeersec_stream() LSM hook to take
   sockptr_t values.

   Previously the net/BPF folks updated the getsockopt code in the
   network stack to leverage the sockptr_t type to make it easier to
   pass both kernel and __user pointers, but unfortunately when they did
   so they didn't convert the LSM hook.

   While there was/is no immediate risk by not converting the LSM hook,
   it seems like this is a mistake waiting to happen so this patch
   proactively does the LSM hook conversion.

 - Convert vfs_getxattr_alloc() to return an int instead of a ssize_t
   and cleanup the callers. Internally the function was never going to
   return anything larger than an int and the callers were doing some
   very odd things casting the return value; this patch fixes all that
   and helps bring a bit of sanity to vfs_getxattr_alloc() and its
   callers.

 - More verbose, and helpful, LSM debug output when the system is booted
   with "lsm.debug" on the command line. There are examples in the
   commit description, but the quick summary is that this patch provides
   better information about which LSMs are enabled and the ordering in
   which they are processed.

 - General comment and kernel-doc fixes and cleanups.

* tag 'lsm-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: Fix description of fs_context_parse_param
  lsm: Add/fix return values in lsm_hooks.h and fix formatting
  lsm: Clarify documentation of vm_enough_memory hook
  reiserfs: Add missing calls to reiserfs_security_free()
  lsm,fs: fix vfs_getxattr_alloc() return type and caller error paths
  device_cgroup: Roll back to original exceptions after copy failure
  LSM: Better reporting of actual LSMs at boot
  lsm: make security_socket_getpeersec_stream() sockptr_t safe
  audit: Fix some kernel-doc warnings
  lsm: remove obsoleted comments for security hooks
  fs: edit a comment made in bad taste

Pull selinux updates from Paul Moore:
 "Two SELinux patches: one increases the sleep time on deprecated
  functionality, and one removes the indirect calls in the sidtab
  context conversion code"

* tag 'selinux-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: remove the sidtab context conversion indirect calls
  selinux: increase the deprecation sleep for checkreqprot and runtime disable

Pull audit updates from Paul Moore:
 "Two performance oriented patches for the audit subsystem: one
  consolidates similar code to gain some caching advantages, while the
  other stores a value in a stack variable to avoid repeated lookups in
  a loop.

  The commit descriptions have more information, including some
  before/after performance measurements"

* tag 'audit-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: unify audit_filter_{uring(), inode_name(), syscall()}
  audit: cache ctx->major in audit_filter_syscall()

Pull landlock updates from Mickaël Salaün:
 "This adds file truncation support to Landlock, contributed by Günther
  Noack. As described by Günther [1], the goal of these patches is to
  work towards a more complete coverage of file system operations that
  are restrictable with Landlock.

  The known set of currently unsupported file system operations in
  Landlock is described at [2]. Out of the operations listed there,
  truncate is the only one that modifies file contents, so these patches
  should make it possible to prevent the direct modification of file
  contents with Landlock.

  The new LANDLOCK_ACCESS_FS_TRUNCATE access right covers both the
  truncate(2) and ftruncate(2) families of syscalls, as well as open(2)
  with the O_TRUNC flag. This includes usages of creat() in the case
  where existing regular files are overwritten.

  Additionally, this introduces a new Landlock security blob associated
  with opened files, to track the available Landlock access rights at
  the time of opening the file. This is in line with Unix's general
  approach of checking the read and write permissions during open(), and
  associating this previously checked authorization with the opened
  file. An ongoing patch documents this use case [3].

  In order to treat truncate(2) and ftruncate(2) calls differently in an
  LSM hook, we split apart the existing security_path_truncate hook into
  security_path_truncate (for truncation by path) and
  security_file_truncate (for truncation of previously opened files)"

Link: https://lore.kernel.org/r/20221018182216.301684-1-gnoack3000@gmail.com [1]
Link: https://www.kernel.org/doc/html/v6.1/userspace-api/landlock.html#filesystem-flags [2]
Link: https://lore.kernel.org/r/20221209193813.972012-1-mic@digikod.net [3]

* tag 'landlock-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  samples/landlock: Document best-effort approach for LANDLOCK_ACCESS_FS_REFER
  landlock: Document Landlock's file truncation support
  samples/landlock: Extend sample tool to support LANDLOCK_ACCESS_FS_TRUNCATE
  selftests/landlock: Test ftruncate on FDs created by memfd_create(2)
  selftests/landlock: Test FD passing from restricted to unrestricted processes
  selftests/landlock: Locally define __maybe_unused
  selftests/landlock: Test open() and ftruncate() in multiple scenarios
  selftests/landlock: Test file truncation support
  landlock: Support file truncation
  landlock: Document init_layer_masks() helper
  landlock: Refactor check_access_path_dual() into is_access_to_paths_allowed()
  security: Create file_truncate hook from path_truncate hook

Pull dma-mapping updates from Christoph Hellwig:

 - reduce the swiotlb buffer size on allocation failure (Alexey
   Kardashevskiy)

 - clean up passing of bogus GFP flags to the dma-coherent allocator
   (Christoph Hellwig)

* tag 'dma-mapping-6.2-2022-12-13' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: reject __GFP_COMP in dma_alloc_attrs
  ALSA: memalloc: don't pass bogus GFP_ flags to dma_alloc_*
  s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent
  cnic: don't pass bogus GFP_ flags to dma_alloc_coherent
  RDMA/qib: don't pass bogus GFP_ flags to dma_alloc_coherent
  RDMA/hfi1: don't pass bogus GFP_ flags to dma_alloc_coherent
  media: videobuf-dma-contig: use dma_mmap_coherent
  swiotlb: reduce the swiotlb buffer size on allocation failure

Pull configfs updates from Christoph Hellwig:

 - fix a memory leak in configfs_create_dir (Chen Zhongjin)

 - remove mentions of committable items that were implemented (Bartosz
   Golaszewski)

* tag 'configfs-6.2-2022-12-13' of git://git.infradead.org/users/hch/configfs:
  configfs: remove mentions of committable items
  configfs: fix possible memory leak in configfs_create_dir()

Pull NFS client updates from Trond Myklebust
 "Bugfixes:
   - Fix NULL pointer dereference in the mount parser
   - Fix memory stomp in decode_attr_security_label
   - Fix credential leak in _nfs4_discover_trunking()
   - Fix buffer leak in rpcrdma_req_create()
   - Fix leaked socket in rpc_sockname()
   - Fix deadlock between nfs4_open_recover_helper() and delegreturn
   - Fix an Oops in nfs_d_automount()
   - Fix potential race in nfs_call_unlink()
   - Multiple fixes for the open context mode
   - NFSv4.2 READ_PLUS fixes
   - Fix a regression in which small rsize/wsize values are being
     forbidden
   - Fail client initialisation if the NFSv4.x state manager thread
     can't run
   - Avoid spurious warning of lost lock that is being unlocked.
   - Ensure the initialisation of struct nfs4_label

  Features and cleanups:
   - Trigger the "ls -l" readdir heuristic sooner
   - Clear the file access cache upon login to ensure supplementary
     group info is in sync between the client and server
   - pnfs: Fix up the logging of layout stateids
   - NFSv4.2: Change the default KConfig value for READ_PLUS
   - Use sysfs_emit() instead of scnprintf() where appropriate"

* tag 'nfs-for-6.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
  NFSv4.2: Change the default KConfig value for READ_PLUS
  NFSv4.x: Fail client initialisation if state manager thread can't run
  fs: nfs: sysfs: use sysfs_emit() to instead of scnprintf()
  NFS: use sysfs_emit() to instead of scnprintf()
  NFS: Allow very small rsize & wsize again
  NFSv4.2: Fix up READ_PLUS alignment
  NFSv4.2: Set the correct size scratch buffer for decoding READ_PLUS
  SUNRPC: Fix missing release socket in rpc_sockname()
  xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
  NFS: avoid spurious warning of lost lock that is being unlocked.
  nfs: fix possible null-ptr-deref when parsing param
  NFSv4: check FMODE_EXEC from open context mode in nfs4_opendata_access()
  NFS: make sure open context mode have FMODE_EXEC when file open for exec
  NFS4.x/pnfs: Fix up logging of layout stateids
  NFS: Fix a race in nfs_call_unlink()
  NFS: Fix an Oops in nfs_d_automount()
  NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
  NFSv4: Fix a credential leak in _nfs4_discover_trunking()
  NFS: Trigger the "ls -l" readdir heuristic sooner
  NFSv4.2: Fix initialisation of struct nfs4_label
  ...

- support for DJ Hero turntable (Joshua Jun)

- XP-PEN Deco LW support (José Expósito)

- PS DualShock 4 controller support (Roderick Colenbrander)

- support for more than one hinge sensor in hid-sensor-custom (Yauhen Kharuzhy)

- wakeup event handling fix for RMI driver (Dmitry Torokhov)

- iio support for the MCP2221 HID driver (Matt Ranostay)

- always send SwID in GetProtocolVersion for Logitech HID++ (Andreas Bergmeier)