- 16 Feb, 2018 40 commits
-
-
Uma Krishnan authored
commit 96cf727f upstream. In the event of a command failure, cxlflash returns the failure to the upper layers to process. After processing the error, when the command is queued again, the private command structure will not be zeroed and the ioasc could be stale. Per the SISLite specification, the AFU only sets the ioasc in the presence of a failure. Thus, even though the original command succeeds the second time, the command is considered a failure due to stale ioasc. This cycle repeats indefinitely and can cause a hang or IO failure. To fix the issue, clear the ioasc before queuing any command. [mkp: added Cc: stable per request] Fixes: 479ad8e9 ("scsi: cxlflash: Remove zeroing of private command data") Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Acked-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Smart authored
commit e4b9794e upstream. In test cases where an instance of the driver is detached and reattached, the driver will crash on reattachment. There is a compound if statement that will skip over the bar setup if the pci_resource_start call is not successful. The driver erroneously returns success to its bar setup in this scenario even though the bars aren't properly configured. Rework the offending code segment for proper initialization steps. If the pci_resource_start call fails, -ENOMEM is now returned. Sample stack: rport-5:0-10: blocked FC remote port time out: removing rport BUG: unable to handle kernel NULL pointer dereference at (null) ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] ... ... RIP: 0010:... ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc] Call Trace: ... lpfc_sli4_post_sync_mbox+0x106/0x4d0 [lpfc] ... ? __alloc_pages_nodemask+0x176/0x420 ... ? __kmalloc+0x2e/0x230 ... lpfc_sli_issue_mbox_s4+0x533/0x720 [lpfc] ... ? mempool_alloc+0x69/0x170 ... ? dma_generic_alloc_coherent+0x8f/0x140 ... lpfc_sli_issue_mbox+0xf/0x20 [lpfc] ... lpfc_sli4_driver_resource_setup+0xa6f/0x1130 [lpfc] ... ? lpfc_pci_probe_one+0x23e/0x16f0 [lpfc] ... lpfc_pci_probe_one+0x445/0x16f0 [lpfc] ... local_pci_probe+0x45/0xa0 ... work_for_cpu_fn+0x14/0x20 ... process_one_work+0x17a/0x440 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Paul E. McKenney authored
commit 156baec3 upstream. Use of init_rcu_head() and destroy_rcu_head() from modules results in the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y: ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to be used by GPL-licensed kernel modules. Reported-by:
Bart Van Assche <Bart.VanAssche@wdc.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Bart Van Assche authored
commit 3bd6f43f upstream. If scsi_eh_scmd_add() is called concurrently with scsi_host_queue_ready() while shost->host_blocked > 0 then it can happen that neither function wakes up the SCSI error handler. Fix this by making every function that decreases the host_busy counter wake up the error handler if necessary and by protecting the host_failed checks with the SCSI host lock. Reported-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> References: https://marc.info/?l=linux-kernel&m=150461610630736 Fixes: commit 74665016 ("scsi: convert host_busy to atomic_t") Signed-off-by:
Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Konstantin Khorenko <khorenko@virtuozzo.com> Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 7b658656 upstream. __unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex(). Al Viro reported this: After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob. Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one). Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk Fixes: 3ba00929 ("ftrace: Introduce ftrace_glob structure") Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Eric Biggers authored
commit c9cc8d01 upstream. If devpts_ptmx_path() returns an error code, then devpts_mntget() dereferences an ERR_PTR(): BUG: unable to handle kernel paging request at fffffffffffffff5 IP: devpts_mntget+0x13f/0x280 fs/devpts/inode.c:173 Fix it by returning early in the error paths. Reproducer: #define _GNU_SOURCE #include <fcntl.h> #include <sched.h> #include <sys/ioctl.h> #define TIOCGPTPEER _IO('T', 0x41) int main() { for (;;) { int fd = open("/dev/ptmx", 0); unshare(CLONE_NEWNS); ioctl(fd, TIOCGPTPEER, 0); } } Fixes: 311fc65c ("pty: Repair TIOCGPTPEER") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric W. Biederman authored
commit 6ac1dc73 upstream. Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong. So fix this by using a sensible si_code (SEGV_MAPERR) for this failure. Fixes: b920de1b ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells <dhowells@redhat.com> Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Amir Goldstein authored
commit a5a927a7 upstream. The optimization in ovl_cache_get_impure() that tries to remove an unneeded "impure" xattr needs to take mnt_want_write() on upper fs. Fixes: 4edb83bb ("ovl: constant d_ino for non-merge dirs") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Amir Goldstein authored
commit d796e77f upstream. As a writable mount, it is not expected for overlayfs to return EINVAL/EROFS for fsync, even if dir/file is not changed. This commit fixes the case of fsync of directory, which is easier to address, because overlayfs already implements fsync file operation for directories. The problem reported by Raphael is that new PostgreSQL 10.0 with a database in overlayfs where lower layer in squashfs fails to start. The failure is due to fsync error, when PostgreSQL does fsync on all existing db directories on startup and a specific directory exists lower layer with no changes. Reported-by:
Raphael Hertzog <raphael@ouaza.com> Signed-off-by:
Raphaël Hertzog <hertzog@debian.org> Signed-off-by:
-
Toshi Kani authored
commit 23fbd7c7 upstream. A NULL pointer reference kernel bug was observed when acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This error path does not set nfit_mem->nvdimm, but the 2nd list_for_each_entry() loop in the function assumes it's always set. Add a check to nfit_mem->nvdimm. Fixes: ba9c8dd3 ("acpi, nfit: add dimm device notification support") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 43cdd1b7 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by:
Wang Qize <wang_qize@venustech.com.cn> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Imre Deak authored
commit 5643205c upstream. We store a SW state of the t11_t12 timing in 100usec units but have to program it in 100msec as required by HW. The rounding used during programming means there will be a mismatch between the SW and HW states of this value triggering a "PPS state mismatch" error. Avoid this by storing the already rounded-up value in the SW state. Note that we still calculate panel_power_cycle_delay with the finer 100usec granularity to avoid any needless waits using that version of the delay. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903 Cc: joks <joks@linux.pl> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.comSigned-off-by:
-
Yan Markman authored
commit 474c5885 upstream. This patch adds Ethernet aliases in the Marvell Armada 7040 DB, 8040 DB and 8040 mcbin device trees so that the bootloader setup the MAC addresses correctly. Signed-off-by:
Yan Markman <ymarkman@marvell.com> [Antoine: commit message, small fixes] Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Peter Zijlstra authored
commit 99ce7962 upstream. Linus reported that GCC-7.3 generated a switch-table construct that confused objtool. It turns out that, in particular due to KASAN, it is possible to have unrelated .rodata usage in between the .rodata setup for the switch-table and the following indirect jump. The simple linear reverse search from the indirect jump would hit upon the KASAN .rodata usage first and fail to find a switch_table, resulting in a spurious 'sibling call with modified stack frame' warning. Fix this by creating a 'jump-stack' which we can 'unwind' during reversal, thereby skipping over much of the in-between code. This is not fool proof by any means, but is sufficient to make the known cases work. Future work would be to construct more comprehensive flow analysis code. Reported-and-tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nikolay Borisov authored
commit f3038ee3 upstream. This function was introduced by 247e743c ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 42440c1f upstream. UBSAN=y fails to build with new GCC/clang: arch/x86/kernel/head64.o: In function `sanitize_boot_params': arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1' because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors. Compiler now uses new __ubsan_handle_type_mismatch_v1() function with slightly modified 'struct type_mismatch_data'. Let's add new 'struct type_mismatch_data_common' which is independent from compiler's layout of 'struct type_mismatch_data'. And make __ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent type mismatch data to our internal representation. This way, we can support both old and new compilers with minimal amount of change. Link: http://lkml.kernel.org/r/20180119152853.16806-1-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by:
Sodagudi Prasad <psodagud@codeaurora.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
commit b8fe1120 upstream. A vist from the spelling fairy. Cc: David Laight <David.Laight@ACULAB.COM> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
-
Daniel Lezcano authored
commit e0aeca3d upstream. The current code hides a couple of bugs: - The global variable 'clock_event_ddata' is overwritten each time the init function is invoked. This is fixed with a kmemdup() instead of assigning the global variable. That prevents a memory corruption when several timers are defined in the DT. - The clockevent's event_handler is NULL if the time framework does not select the clockevent when registering it, this is fine but the init code generates in any case an interrupt leading to dereference this NULL pointer. The stm32 timer works with shadow registers, a mechanism to cache the registers. When a change is done in one buffered register, we need to artificially generate an event to force the timer to copy the content of the register to the shadowed register. The auto-reload register (ARR) is one of the shadowed register as well as the prescaler register (PSC), so in order to force the copy, we issue an event which in turn leads to an interrupt and the NULL dereference. This is fixed by inverting two lines where we clear the status register before enabling the update event interrupt. As this kernel crash is resulting from the combination of these two bugs, the fixes are grouped into a single patch. Tested-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
-
Ming Lei authored
commit c2856ae2 upstream. After queue is frozen, dispatch still may happen, for example: 1) requests are submitted from several contexts 2) requests from all these contexts are inserted to queue, but may dispatch to LLD in one of these paths, but other paths sill need to move on even all these requests are completed(that means blk_mq_freeze_queue_wait() returns at that time) 3) dispatch after queue freezing still moves on and causes use-after-free, because request queue is freed This patch quiesces queue after it is frozen, and makes sure all in-progress dispatch are completed. This patch fixes the following kernel crash when running heavy IOs vs. deleting device: [ 36.719251] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 36.720318] IP: kyber_has_work+0x14/0x40 [ 36.720847] PGD 254bf5067 P4D 254bf5067 PUD 255e6a067 PMD 0 [ 36.721584] Oops: 0000 [#1] PREEMPT SMP [ 36.722105] Dumping ftrace buffer: [ 36.722570] (ftrace buffer empty) [ 36.723057] Modules linked in: scsi_debug ebtable_filter ebtables ip6table_filter ip6_tables tcm_loop iscsi_target_mod target_core_file target_core_iblock target_core_pscsi target_core_mod xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c bridge stp llc fuse iptable_filter ip_tables sd_mod sg btrfs xor zstd_decompress zstd_compress xxhash raid6_pq mptsas mptscsih bcache crc32c_intel ahci mptbase libahci serio_raw scsi_transport_sas nvme libata shpchp lpc_ich virtio_scsi nvme_core binfmt_misc dm_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi null_blk configs [ 36.733438] CPU: 2 PID: 2374 Comm: fio Not tainted 4.15.0-rc2.blk_mq_quiesce+ #714 [ 36.735143] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.9.3-1.fc25 04/01/2014 [ 36.736688] RIP: 0010:kyber_has_work+0x14/0x40 [ 36.737515] RSP: 0018:ffffc9000209bca0 EFLAGS: 00010202 [ 36.738431] RAX: 0000000000000008 RBX: ffff88025578bfc8 RCX: ffff880257bf4ed0 [ 36.739581] RDX: 0000000000000038 RSI: ffffffff81a98c6d RDI: ffff88025578bfc8 [ 36.740730] RBP: ffff880253cebfc8 R08: ffffc9000209bda0 R09: ffff8802554f3480 [ 36.741885] R10: ffffc9000209be60 R11: ffff880263f72538 R12: ffff88025573e9e8 [ 36.743036] R13: ffff88025578bfd0 R14: 0000000000000001 R15: 0000000000000000 [ 36.744189] FS: 00007f9b9bee67c0(0000) GS:ffff88027fc80000(0000) knlGS:0000000000000000 [ 36.746617] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.748483] CR2: 0000000000000008 CR3: 0000000254bf4001 CR4: 00000000003606e0 [ 36.750164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 36.751455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 36.752796] Call Trace: [ 36.753992] blk_mq_do_dispatch_sched+0x7f/0xe0 [ 36.755110] blk_mq_sched_dispatch_requests+0x119/0x190 [ 36.756179] __blk_mq_run_hw_queue+0x83/0x90 [ 36.757144] __blk_mq_delay_run_hw_queue+0xaf/0x110 [ 36.758046] blk_mq_run_hw_queue+0x24/0x70 [ 36.758845] blk_mq_flush_plug_list+0x1e7/0x270 [ 36.759676] blk_flush_plug_list+0xd6/0x240 [ 36.760463] blk_finish_plug+0x27/0x40 [ 36.761195] do_io_submit+0x19b/0x780 [ 36.761921] ? entry_SYSCALL_64_fastpath+0x1a/0x7d [ 36.762788] entry_SYSCALL_64_fastpath+0x1a/0x7d [ 36.763639] RIP: 0033:0x7f9b9699f697 [ 36.764352] RSP: 002b:00007ffc10f991b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000d1 [ 36.765773] RAX: ffffffffffffffda RBX: 00000000008f6f00 RCX: 00007f9b9699f697 [ 36.766965] RDX: 0000000000a5e6c0 RSI: 0000000000000001 RDI: 00007f9b8462a000 [ 36.768377] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000000008f6420 [ 36.769649] R10: 00007f9b846e5000 R11: 0000000000000206 R12: 00007f9b795d6a70 [ 36.770807] R13: 00007f9b795e4140 R14: 00007f9b795e3fe0 R15: 0000000100000000 [ 36.771955] Code: 83 c7 10 e9 3f 68 d1 ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 97 b0 00 00 00 48 8d 42 08 48 83 c2 38 <48> 3b 00 74 06 b8 01 00 00 00 c3 48 3b 40 08 75 f4 48 83 c0 10 [ 36.775004] RIP: kyber_has_work+0x14/0x40 RSP: ffffc9000209bca0 [ 36.776012] CR2: 0000000000000008 [ 36.776690] ---[ end trace 4045cbce364ff2a4 ]--- [ 36.777527] Kernel panic - not syncing: Fatal exception [ 36.778526] Dumping ftrace buffer: [ 36.779313] (ftrace buffer empty) [ 36.780081] Kernel Offset: disabled [ 36.780877] ---[ end Kernel panic - not syncing: Fatal exception Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Bart Van Assche authored
commit 882d4171 upstream. Call bdev_get_queue(bdev) after bdev->bd_disk has been initialized instead of just before that pointer has been initialized. This patch avoids that the following command pktsetup 1 /dev/sr0 triggers the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000548 IP: pkt_setup_dev+0x2db/0x670 [pktcdvd] CPU: 2 PID: 724 Comm: pktsetup Not tainted 4.15.0-rc4-dbg+ #1 Call Trace: pkt_ctl_ioctl+0xce/0x1c0 [pktcdvd] do_vfs_ioctl+0x8e/0x670 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x23/0x9a Reported-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Fixes: commit ca18d6f7 ("block: Make most scsi_req_init() calls implicit") Signed-off-by:
-
Bart Van Assche authored
commit 5a0ec388 upstream. Commit 523e1d39 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails: Kernel BUG at 00000000e98fd882 [verbose debug info unavailable] Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path. Fixes: commit 523e1d39 ("block: make gendisk hold a reference to its queue") Signed-off-by:
-
Peter Rosin authored
commit b930151e upstream. Without such a range, gpiolib fails with -EPROBE_DEFER, pending the addition of the range. So, without a range, gpiolib will keep deferring indefinitely. Fixes: 9e80f906 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Fixes: e10f72bf ("gpio: gpiolib: Generalise state persistence beyond sleep") Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
commit 1a1d39e1 upstream. Various gpiolib activity depend on the pinctrl to be up and kicking. Therefore, register the pinctrl before adding a gpiochip. Suggested-by:
-
Peter Rosin authored
commit 0657cb50 upstream. There is no matching call to pinctrl_unregister, so switch to the managed devm_pinctrl_register to clean up properly when done. Fixes: 9e80f906 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver") Signed-off-by:
-
Dmitry Mastykin authored
commit 02e389e6 upstream. When using mcp23s08 module with gpio-keys, often (50% of boots) it fails to get irq numbers with message: "gpio-keys keys: Unable to get irq number for GPIO 0, error -6". Seems that irqs must be setup before devm_gpiochip_add_data(). Signed-off-by:
Dmitry Mastykin <mastichi@gmail.com> Signed-off-by:
-
Mika Westerberg authored
commit f5a26acf upstream. When a GPIO is requested using gpiod_get_* APIs the intel pinctrl driver switches the pin to GPIO mode and makes sure interrupts are routed to the GPIO hardware instead of IOAPIC. However, if the GPIO is used directly through irqchip, as is the case with many I2C-HID devices where I2C core automatically configures interrupt for the device, the pin is not initialized as GPIO. Instead we rely that the BIOS configures the pin accordingly which seems not to be the case at least in Asus X540NA SKU3 with Focaltech touchpad. When the pin is not properly configured it might result weird behaviour like interrupts suddenly stop firing completely and the touchpad stops responding to user input. Fix this by properly initializing the pin to GPIO mode also when it is used directly through irqchip. Fixes: 7981c001 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Reported-by:
Daniel Drake <drake@endlessm.com> Reported-and-tested-by:
Chris Chiu <chiu@endlessm.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
James Hogan authored
commit 544e9258 upstream. Fix an uninitialized variable warning in the Octeon EDAC driver, as seen in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU Tools 2016.05-03: drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’: drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \ be used uninitialized in this function [-Wmaybe-uninitialized] if (int_reg.s.sec_err || int_reg.s.ded_err) { ^ Iinitialise the whole int_reg variable to zero before the conditional assignments in the error injection case. Signed-off-by:
James Hogan <jhogan@kernel.org> Acked-by:
David Daney <david.daney@cavium.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Fixes: 1bc021e8 ("EDAC: Octeon: Add error injection support") Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Max Filippov authored
commit ca474809 upstream. Return 0 if the operation was successful, not the userspace memory value. Check that userspace value equals passed oldval, not itself. Don't update *uval if the value wasn't read from userspace memory. This fixes process hang due to infinite loop in futex_lock_pi. It also fixes a bunch of glibc tests nptl/tst-mutexpi*. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 4b01abdb upstream. Since version 4.9, the kernel automatically breaks printk calls into multiple newlines unless pr_cont is used. Fix the alpha stacktrace code, so that it prints stack trace in four columns, as it was initially intended. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 55fc633c upstream. We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get machine check exception when attempting to reboot the machine. Signed-off-by:
-
Michael Cree authored
commit 84e45536 upstream. Fix the typo (mixed up arguments) in the EXC macro in the futex definitions introduced by commit ca282f69 (alpha: add a helper for emitting exception table entries). Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
-
Arnd Bergmann authored
commit 47669fb6 upstream. There was a typo in the new version of put_tv32() that caused an unguarded access of a user space pointer, and failed to return the correct result in gettimeofday(), wait4(), usleep_thread() and old_adjtimex(). This fixes it to give the correct behavior again. Fixes: 1cc6c463 ("osf_sys.c: switch handling of timeval32/itimerval32 to copy_{to,from}_user()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Mikulas Patocka authored
commit 21ffceda upstream. On alpha, a process will crash if it attempts to start a thread and a signal is delivered at the same time. The crash can be reproduced with this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html The reason for the crash is this: * we call the clone syscall * we go to the function copy_process * copy process calls copy_thread_tls, it is a wrapper around copy_thread * copy_thread sets the tls pointer: childti->pcb.unique = regs->r20 * copy_thread sets regs->r20 to zero * we go back to copy_process * copy process checks "if (signal_pending(current))" and returns -ERESTARTNOINTR * the clone syscall is restarted, but this time, regs->r20 is zero, so the new thread is created with zero tls pointer * the new thread crashes in start_thread when attempting to access tls The comment in the code says that setting the register r20 is some compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug by zeroing regs->r20 only if CLONE_SETTLS is not set. Signed-off-by:
-
Eric W. Biederman authored
commit 0e88bb00 upstream. Set si_signo. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Fixes: 0983b318 ("sh: Wire up division and address error exceptions on SH-2A.") Signed-off-by:
-
Eric W. Biederman authored
commit 500d5830 upstream. While reviewing the signal sending on openrisc the do_unaligned_access function stood out because it is obviously wrong. A comment about an si_code set above when actually si_code is never set. Leading to a random si_code being sent to userspace in the event of an unaligned access. Looking further SIGBUS BUS_ADRALN is the proper pair of signal and si_code to send for an unaligned access. That is what other architectures do and what is required by posix. Given that do_unaligned_access is broken in a way that no one can be relying on it on openrisc fix the code to just do the right thing. Fixes: 769a8a96 ("OpenRISC: Traps") Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: openrisc@lists.librecores.org Acked-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
John Garry authored
commit 5516e21a upstream. Currently a crash can be seen if we reach the "err" label in dmi_add_platform_ipmi(), calling platform_device_put(), like here: [ 7.270584] (null): ipmi:dmi: Unable to add resources: -16 [ 7.330229] ------------[ cut here ]------------ [ 7.334889] kernel BUG at mm/slub.c:3894! [ 7.338936] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 7.344475] Modules linked in: [ 7.347556] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00004-gbe9cb7b-dirty #114 [ 7.355907] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 11/29/2017 [ 7.365137] task: 00000000c211f6d3 task.stack: 00000000f276e9af [ 7.371116] pstate: 60000005 (nZCv daif -PAN -UAO) [ 7.375957] pc : kfree+0x194/0x1b4 [ 7.379389] lr : platform_device_release+0xcc/0xd8 [ 7.384225] sp : ffff0000092dba90 [ 7.387567] x29: ffff0000092dba90 x28: ffff000008a83000 [ 7.392933] x27: ffff0000092dbc10 x26: 00000000000000e6 [ 7.398297] x25: 0000000000000003 x24: ffff0000085b51e8 [ 7.403662] x23: 0000000000000100 x22: ffff7e0000234cc0 [ 7.409027] x21: ffff000008af3660 x20: ffff8017d21acc10 [ 7.414392] x19: ffff8017d21acc00 x18: 0000000000000002 [ 7.419757] x17: 0000000000000001 x16: 0000000000000008 [ 7.425121] x15: 0000000000000001 x14: 6666666678303d65 [ 7.430486] x13: 6469727265766f5f x12: 7265766972642e76 [ 7.435850] x11: 6564703e2d617020 x10: 6530326435373638 [ 7.441215] x9 : 3030303030303030 x8 : 3d76656420657361 [ 7.446580] x7 : ffff000008f59df8 x6 : ffff8017fbe0ea50 [ 7.451945] x5 : 0000000000000000 x4 : 0000000000000000 [ 7.457309] x3 : ffffffffffffffff x2 : 0000000000000000 [ 7.462674] x1 : 0fffc00000000800 x0 : ffff7e0000234ce0 [ 7.468039] Process swapper/0 (pid: 1, stack limit = 0x00000000f276e9af) [ 7.474809] Call trace: [ 7.477272] kfree+0x194/0x1b4 [ 7.480351] platform_device_release+0xcc/0xd8 [ 7.484837] device_release+0x34/0x90 [ 7.488531] kobject_put+0x70/0xcc [ 7.491961] put_device+0x14/0x1c [ 7.495304] platform_device_put+0x14/0x1c [ 7.499439] dmi_add_platform_ipmi+0x348/0x3ac [ 7.503923] scan_for_dmi_ipmi+0xfc/0x10c [ 7.507970] do_one_initcall+0x38/0x124 [ 7.511840] kernel_init_freeable+0x188/0x228 [ 7.516238] kernel_init+0x10/0x100 [ 7.519756] ret_from_fork+0x10/0x18 [ 7.523362] Code: f94002c0 37780080 f94012c0 37000040 (d4210000) [ 7.529552] ---[ end trace 11750e4787deef9e ]--- [ 7.534228] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 7.534228] This is because when the device is released in platform_device_release(), we try to free pdev.driver_override. This is a const string, hence the crash. Fix by using dynamic memory for pdev->driver_override. Signed-off-by:
John Garry <john.garry@huawei.com> [Removed the free of driver_override from ipmi_si_remove_by_dev(). The free is done in platform_device_release(), and would result in a double free, and ipmi_si_remove_by_dev() is called by non-platform devices.] Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Hans de Goede authored
commit 61f5acea upstream. Commit 7d06d589 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices, instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c. This was done because the DIY BTUSB_RESET_RESUME reset-resume handling has several issues (see the original commit message). An added advantage of moving over to the USB-core reset-resume handling is that it also disables autosuspend for these devices, which is similarly broken on these. But there are 2 issues with this approach: 1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek devices. 2) Sofar only 2 of the 10 QCA devices known to the btusb code have been added to usb/core/quirks.c and if we fix the Realtek case the same way we need to add an additional 14 entries. So in essence we need to duplicate a large part of the usb_device_id table in btusb.c in usb/core/quirks.c and manually keep them in sync. This commit instead restores setting a reset-resume quirk for QCA devices in the btusb.c code, avoiding the duplicate usb_device_id table problem. This commit avoids the problems with the original DIY BTUSB_RESET_RESUME code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the usb_device. This commit also moves the BTUSB_REALTEK case over to directly setting the USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused BTUSB_RESET_RESUME code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 7d06d589 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 7d06d589 upstream. This reverts commit fd865802. This commit causes a regression on some QCA ROME chips. The USB device reset happens in btusb_open(), hence firmware loading gets interrupted. Furthermore, this commit stops working after commit ("a0085f25 Bluetooth: btusb: driver to enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in btusb_suspend() when it's not a wakeup source. If we really want to reset the USB device, we need to do it before btusb_open(). Let's handle it in drivers/usb/core/quirks.c. Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
-
Hans de Goede authored
commit b4cdaba2 upstream. BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT) use an UART connection for bluetooth. But they also advertise btsdio support on their 3th sdio function, this causes 2 problems: 1) A non functioning BT HCI getting registered 2) Since the btsdio driver does not have suspend/resume callbacks, mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify() to react as if the SDIO-card is removed and since the slot is marked as non-removable it will never get detected as inserted again. Which results in wifi no longer working after a suspend/resume. This commit fixes both by making btsdio ignore BCM43341 devices when connected to a slot which is marked non-removable. Signed-off-by:
-
Hans de Goede authored
commit edfc3722 upstream. The Toshiba Click Mini uses an i2c attached keyboard/touchpad combo (single i2c_hid device for both) which has a vid:pid of 04F3:0401, which is also used by a bunch of Elan touchpads which are handled by the drivers/input/mouse/elan_i2c driver, but that driver deals with pure touchpads and does not work for a combo device such as the one on the Toshiba Click Mini. The combo on the Mini has an ACPI id of ELAN0800, which is not claimed by the elan_i2c driver, so check for that and if it is found do not ignore the device. This fixes the keyboard/touchpad combo on the Mini not working (although with the touchpad in mouse emulation mode). Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
