- 04 Oct, 2016 31 commits
-
-
Johannes Berg authored
Resolve the merge conflict between Felix's/my and Toke's patches coming into the tree through net and mac80211-next respectively. Most of Felix's changes go away due to Toke's new infrastructure work, my patch changes to "goto begin" (the label wasn't there before) instead of returning NULL so flow control towards drivers is preserved better. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
David S. Miller authored
Gavin Shan says: ==================== net/ncsi: NCSI Improvment and bug fixes This series of patches improves NCSI stack according to the comments I received after the NCSI code was merged to 4.8.rc1: * PATCH[1/8] fixes the build warning caused by xchg() with ia64-linux-gcc. The atomic operations are removed. The NCSI's lock should be taken when reading or updating its state and chained state. * Channel ID (0x1f) is the reserved one and it cannot be valid channel ID. So we needn't try to probe channel whose ID is 0x1f. PATCH[2/8] and PATCH[3/8] are addressing this issue. * The request IDs are assigned in round-robin fashion, but it's broken. PATCH[4/8] make it work. * PATCH[5/8] and PATCH[6/8] reworks the channel monitoring to improve the code readability and its robustness. * PATCH[7/8] and PATCH[8/8] introduces ncsi_stop_dev() so that the network device can be closed and opened afterwards. No error will be seen. Changelog ========= v2: * The NCSI's lock is taken when reading or updating its state as the {READ,WRITE}_ONCE() isn't reliable. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Gavin Shan authored
This stops NCSI device when closing the network device so that the NCSI device can be reenabled later. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Gavin Shan authored
This introduces ncsi_stop_dev(), as counterpart to ncsi_start_dev(), to stop the NCSI device so that it can be reenabled in future. This API should be called when the network device driver is going to shutdown the device. There are 3 things done in the function: Stop the channel monitoring; Reset channels to inactive state; Report NCSI link down. Signed-off-by:
-
Gavin Shan authored
The original NCSI channel monitoring was implemented based on a backoff algorithm: the GLS response should be received in the specified interval. Otherwise, the channel is regarded as dead and failover should be taken if current channel is an active one. There are several problems in the implementation: (A) On BCM5718, we found when the IID (Instance ID) in the GLS command packet changes from 255 to 1, the response corresponding to IID#1 never comes in. It means we cannot make the unfair judgement that the channel is dead when one response is missed. (B) The code's readability should be improved. (C) We should do failover when current channel is active one and the channel monitoring should be marked as disabled before doing failover. This reworks the channel monitoring to address all above issues. The fields for channel monitoring is put into separate struct and the state of channel monitoring is predefined. The channel is regarded alive if the network controller responses to one of two GLS commands or both of them in 5 seconds. Signed-off-by:
-
Gavin Shan authored
There is only one NCSI request property for now: the response for the sent command need drive the workqueue or not. So we had one field (@driven) for the purpose. We lost the flexibility to extend NCSI request properties. This replaces @driven with @flags and @req_flags in NCSI request and NCSI command argument struct. Each bit of the newly introduced field can be used for one property. No functional changes introduced. Signed-off-by:
-
Gavin Shan authored
The NCSI request index (struct ncsi_request::id) is put into instance ID (IID) field while sending NCSI command packet. It was designed the available IDs are given in round-robin fashion. @ndp->request_id was introduced to represent the next available ID, but it has been used as number of successively allocated IDs. It breaks the round-robin design. Besides, we shouldn't put 0 to NCSI command packet's IID field, meaning ID#0 should be reserved according section 6.3.1.1 in NCSI spec (v1.1.0). This fixes above two issues. With it applied, the available IDs will be assigned in round-robin fashion and ID#0 won't be assigned. Signed-off-by:
-
Gavin Shan authored
We needn't send CIS (Clear Initial State) command to the NCSI reserved channel (0x1f) in the enumeration. We shouldn't receive a valid response from CIS on NCSI channel 0x1f. Signed-off-by:
-
Gavin Shan authored
This defines NCSI_RESERVED_CHANNEL as the reserved NCSI channel ID (0x1f). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
xchg() is used to set NCSI channel's state in order for consistent access to the state. xchg()'s return value should be used. Otherwise, one build warning will be raised (with -Wunused-value) as below message indicates. It is reported by ia64-linux-gcc (GCC) 4.9.0. net/ncsi/ncsi-manage.c: In function 'ncsi_channel_monitor': arch/ia64/include/uapi/asm/cmpxchg.h:56:2: warning: value computed is \ not used [-Wunused-value] ((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr)))) ^ net/ncsi/ncsi-manage.c:202:3: note: in expansion of macro 'xchg' xchg(&nc->state, NCSI_CHANNEL_INACTIVE); This removes the atomic access to NCSI channel's state avoid the above build warning. We have to hold the channel's lock when its state is readed or updated. No functional changes introduced. Signed-off-by:
-
Andrew Collins authored
This is a respin of a patch to fix a relatively easily reproducible kernel panic related to the all_adj_list handling for netdevs in recent kernels. The following sequence of commands will reproduce the issue: ip link add link eth0 name eth0.100 type vlan id 100 ip link add link eth0 name eth0.200 type vlan id 200 ip link add name testbr type bridge ip link set eth0.100 master testbr ip link set eth0.200 master testbr ip link add link testbr mac0 type macvlan ip link delete dev testbr This creates an upper/lower tree of (excuse the poor ASCII art): /---eth0.100-eth0 mac0-testbr- \---eth0.200-eth0 When testbr is deleted, the all_adj_lists are walked, and eth0 is deleted twice from the mac0 list. Unfortunately, during setup in __netdev_upper_dev_link, only one reference to eth0 is added, so this results in a panic. This change adds reference count propagation so things are handled properly. Matthias Schiffer reported a similar crash in batman-adv: https://github.com/freifunk-gluon/gluon/issues/680 https://www.open-mesh.org/issues/247 which this patch also seems to resolve. Signed-off-by:Andrew Collins <acollins@cradlepoint.com> Signed-off-by:
-
Raju Lakkaraju authored
Edge-rate: As system and networking speeds increase, a signal's output transition, also know as the edge rate or slew rate (V/ns), takes on greater importance because high-speed signals come with a price. That price is an assortment of interference problems like ringing on the line, signal overshoot and undershoot, extended signal settling times, crosstalk noise, transmission line reflections, false signal detection by the receiving device and electromagnetic interference (EMI) -- all of which can negate the potential gains designers are seeking when they try to increase system speeds through the use of higher performance logic devices. The fact is, faster signaling edge rates can cause a higher level of electrical noise or other type of interference that can actually lead to slower line speeds and lower maximum system frequencies. This parameter allow the board designers to change the driving strange, and thereby change the EMI behavioral. Edge-rate parameters (vddmac, edge-slowdown) get from Device Tree. Tested on Beaglebone Black with VSC 8531 PHY. Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by:
-
Benjamin Poirier authored
vmxnet3_reset_work() expects tx queues to be stopped (via vmxnet3_quiesce_dev -> netif_tx_disable). However, this races with the netif_wake_queue() call in netif_tx_timeout() such that the driver's start_xmit routine may be called unexpectedly, triggering one of the BUG_ON in vmxnet3_map_pkt with a stack trace like this: RIP: 0010:[<ffffffffa00cf4bc>] vmxnet3_map_pkt+0x3ac/0x4c0 [vmxnet3] [<ffffffffa00cf7e0>] vmxnet3_tq_xmit+0x210/0x4e0 [vmxnet3] [<ffffffff813ab144>] dev_hard_start_xmit+0x2e4/0x4c0 [<ffffffff813c956e>] sch_direct_xmit+0x17e/0x1e0 [<ffffffff813c96a7>] __qdisc_run+0xd7/0x130 [<ffffffff813a6a7a>] net_tx_action+0x10a/0x200 [<ffffffff810691df>] __do_softirq+0x11f/0x260 [<ffffffff81472fdc>] call_softirq+0x1c/0x30 [<ffffffff81004695>] do_softirq+0x65/0xa0 [<ffffffff81069b89>] local_bh_enable_ip+0x99/0xa0 [<ffffffffa031ff36>] destroy_conntrack+0x96/0x110 [nf_conntrack] [<ffffffff813d65e2>] nf_conntrack_destroy+0x12/0x20 [<ffffffff8139c6d5>] skb_release_head_state+0xb5/0xf0 [<ffffffff8139d299>] skb_release_all+0x9/0x20 [<ffffffff8139cfe9>] __kfree_skb+0x9/0x90 [<ffffffffa00d0069>] vmxnet3_quiesce_dev+0x209/0x340 [vmxnet3] [<ffffffffa00d020a>] vmxnet3_reset_work+0x6a/0xa0 [vmxnet3] [<ffffffff8107d7cc>] process_one_work+0x16c/0x350 [<ffffffff810804fa>] worker_thread+0x17a/0x410 [<ffffffff810848c6>] kthread+0x96/0xa0 [<ffffffff81472ee4>] kernel_thread_helper+0x4/0x10 Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2016-10-02 This series contains updates to fm10k only. Jake fixes an issue where PTP applications requesting software timestamps may complain that the requested mode is not supported, so add a generic callback for those drivers that have software transmit timestamp support enabled. Then provides a trivial cleanup where a code was not wrapped properly. Got make sure that code looks good in a 80 character limit. ==================== Signed-off-by: -
Guilherme G Piccoli authored
Although rare, it's possible to hit PCI error early on device probe, meaning possibly some structs are not entirely initialized, and some might even be completely uninitialized, leading to NULL pointer dereference. The i40e driver currently presents a "bad" behavior if device hits such early PCI error: firstly, the struct i40e_pf might not be attached to pci_dev yet, leading to a NULL pointer dereference on access to pf->state. Even checking if the struct is NULL and avoiding the access in that case isn't enough, since the driver cannot recover from PCI error that early; in our experiments we saw multiple failures on kernel log, like: [549.664] i40e 0007:01:00.1: Initial pf_reset failed: -15 [549.664] i40e: probe of 0007:01:00.1 failed with error -15 [...] [871.644] i40e 0007:01:00.1: The driver for the device stopped because the device firmware failed to init. Try updating your NVM image. [871.644] i40e: probe of 0007:01:00.1 failed with error -32 [...] [872.516] i40e 0007:01:00.0: ARQ: Unknown event 0x0000 ignored Between the first probe failure (error -15) and the second (error -32) another PCI error happened due to the first bad probe. Also, driver started to flood console with those ARQ event messages. This patch will prevent these issues by allowing error recovery mechanism to remove the failed device from the system instead of trying to recover from early PCI errors during device probe. CC: <stable@vger.kernel.org> Signed-off-by:
Guilherme G Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-10-03 This series contains fixes to i40e only. Stefan Assmann provides the changes in this series to resolve an issue where when we run out of MSIx vectors, iWARP gets disabled automatically. First adds a check for "no vectors left" during MSIx vector allocation for VMDq, which will prevent more vectors being allocated than available. Then fixed the MSIx vector redistribution when we reach the hardware limit for vectors so that additional features like VMDq, iWARP, etc do not get starved for vectors because the PF is hogging all the resources. Lastly, fix the issue for flow director by moving the check for the reaching the vector limit earlier in the code so that a decision can be made on disabling flow director. ==================== Signed-off-by: -
David S. Miller authored
Yuval Mintz says: ==================== qed*: Add qedr infrastructure support In the last couple of weeks we've been sending RFCs for the qedr driver - the RoCE driver for QLogic FastLinQ 4xxxx line of adapters. Latest RFC can be found at [1]. At Doug's advice [2], we've decided to split the series into two: - first part contains the qed backbone that's necessary for all the configurations relating to the qedr driver, as well as the qede infrastructure that is used for communication between the qedr and qede. - Second part consists of the actual qedr driver and introduces almost no changes to qed/qede. This is the first of said two parts. The second half would be sent later this week. The only 'oddity' in the devision are the Kconfig options - As this series introduces both LL2 and QEDR-based logic in qed/qede, I wanted to add the CONFIG_INFINIBAND_QEDR option here [with default n]. Otherwise, a lot of the code introduced would be dead-code [won't even be compiled] until qedr is accepted. As a result I've placed the config option in an odd place - under qlogic's Kconfig. The second series would then remove that option and add it in its correct place under the infiniband Kconfig. [I'm fine with pushing it there to begin with, but I didn't want to 'contaminate' non-qlogic configuration files with half-baked options]. Dave - I don't think you were E-mailed with Doug's suggestion. I think the notion was to have the two halves accepted side-by-side, but actually the first has no dependency issues, so it's also possible to simply take this first to net-next, and push the qedr into rdma once it's merged. But it's basically up to you and Doug; We'd align with whatever suits you best. ==================== Signed-off-by: -
Ram Amrani authored
Add the RoCE-specific LL2 logic [as well as GSI support] over the 'generic' LL2 interface. Signed-off-by:
Ram Amrani <Ram.Amrani@caviumnetworks.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by:
-
Ram Amrani authored
Add slowpath configuration support for user, dma and memory regions registration. Signed-off-by:
-
Ram Amrani authored
Add support for the slowpath configurations of Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs. Signed-off-by:
-
Ram Amrani authored
Add support for the configurations of the protection domain and completion queues. Signed-off-by:
-
Ram Amrani authored
This adds the backbone required for the various HW initalizations which are necessary for the qedr driver - FW notification, resource initializations, etc. Signed-off-by:
-
Ram Amrani authored
Adds a skeletal implementation of the qede RoCE driver - The qedr has some dependencies of the state of the underlying base interface. This adds some logic required with mutual registrations and the ability to pass updates on 'intresting' events. Signed-off-by:
-
Yuval Mintz authored
Other protocols beside the networking driver need the ability of passing some L2 traffic, usually [although not limited] for the purpose of some management traffic. Signed-off-by:
-
Stefan Assmann authored
Currently if the MSI-X vector limit is reached the sideband flow director gets disabled. A bit too early to make that decision, as vectors may get re-distributed. So move the check further back. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
Stefan Assmann authored
The driver allocates 1 vector per CPU thread and the current hardware limit for vectors is 129 per PF. On systems with 128 or more threads this currently means all vectors are used by the PF leaving no room for additional features like VMDq, iWARP, etc... The code that should redistribute the vectors in this case is broken and never triggers. Fixed the code so that it actually triggers if the hardware limit is reached and adjust the number of queue pairs accordingly. Also the number of initially requested iWARP vectors was not properly saved when the vector limit was reached, and therefore always zero. Comparison with debug statement. Before: i40e 0000:2d:00.0: VMDq disabled, not enough MSI-X vectors i40e 0000:2d:00.0: IWARP disabled, not enough MSI-X vectors i40e 00.0 MSI-X vector distribution: PF 128, VMDq 0, FDSB 0, iWARP 0 After: i40e 0000:2d:00.0: MSI-X vector limit reached, attempting to redistribute vectors i40e 00.0 MSI-X vector distribution: PF 78, VMDq 8, FDSB 0, iWARP 42 Signed-off-by:
-
Stefan Assmann authored
During MSI-X vector allocation for VMDq, a check for "no vectors left" was missing, add it. This prevents more vectors to be allocated than available. Signed-off-by:
-
Christophe Jaillet authored
A call to 'ida_simple_remove()' is missing in the error handling path. This as been spotted with the following coccinelle script which tries to detect missing 'ida_simple_remove()' call in error handling paths. /////////////// @@ expression x; identifier l; @@ * x = ida_simple_get(...); ... if (...) { ... } ... if (...) { ... goto l; } ... * l: ... when != ida_simple_remove(...); Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Also add check for return value of platform_get_resource(). Fixes: 54e19bc7 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
Shmulik Ladkani authored
skb_vlan_pop/push were too generic, trying to support the cases where skb->data is at mac header, and cases where skb->data is arbitrarily elsewhere. Supporting an arbitrary skb->data was complex and bogus: - It failed to unwind skb->data to its original location post actual pop/push. (Also, semantic is not well defined for unwinding: If data was into the eth header, need to use same offset from start; But if data was at network header or beyond, need to adjust the original offset according to the push/pull) - It mangled the rcsum post actual push/pop, without taking into account that the eth bytes might already have been pulled out of the csum. Most callers (ovs, bpf) already had their skb->data at mac_header upon invoking skb_vlan_pop/push. Last caller that failed to do so (act_vlan) has been recently fixed. Therefore, to simplify things, no longer support arbitrary skb->data inputs for skb_vlan_pop/push(). skb->data is expected to be exactly at mac_header; WARN otherwise. Signed-off-by:Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Pravin Shelar <pshelar@ovn.org> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Shmulik Ladkani authored
Generic skb_vlan_push/skb_vlan_pop functions don't properly handle the case where the input skb data pointer does not point at the mac header: - They're doing push/pop, but fail to properly unwind data back to its original location. For example, in the skb_vlan_push case, any subsequent 'skb_push(skb, skb->mac_len)' calls make the skb->data point 4 bytes BEFORE start of frame, leading to bogus frames that may be transmitted. - They update rcsum per the added/removed 4 bytes tag. Alas if data is originally after the vlan/eth headers, then these bytes were already pulled out of the csum. OTOH calling skb_vlan_push/skb_vlan_pop with skb->data at mac_header present no issues. act_vlan is the only caller to skb_vlan_*() that has skb->data pointing at network header (upon ingress). Other calles (ovs, bpf) already adjust skb->data at mac_header. This patch fixes act_vlan to point to the mac_header prior calling skb_vlan_*() functions, as other callers do. Signed-off-by:
-
- 03 Oct, 2016 9 commits
-
-
Jacob Keller authored
Trivial change here to cleanup a checkpatch.pl warning that got introduced when changing to alloc_workqueue. Signed-off-by:
Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by:
-
Alexey Khoroshilov authored
There is no need to clk_disable_unprepare(dev->clk) before it was initialized. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160930' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: More fixes and adjustments This set of patches contains some more fixes and adjustments: (1) Actually display the retransmission indication previously added to the tx_data trace. (2) Switch to Congestion Avoidance mode properly at cwnd==ssthresh rather than relying on detection during an overshoot and correction. (3) Reduce ssthresh to the peer's declared receive window. (4) The offset field in rxrpc_skb_priv can be dispensed with and the error field is no longer used. Get rid of them. (5) Keep the call timeouts as ktimes rather than jiffies to make it easier to deal with RTT-based timeout values in future. Rounding to jiffies is still necessary when the system timer is set. (6) Fix the call timer handling to avoid retriggering of expired timeout actions. ==================== Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== openvswitch: mpls fix and clean up Convert to the new mpls skb layout the last remaining place in openvswitch, forgotten on the mpls GSO rework. The GSO rework also allows for some cleanup in the third patch. ==================== Signed-off-by: -
Jiri Benc authored
skb_mpls_header is equivalent to mpls_hdr now. Use the existing helper instead. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Jiri Benc authored
This will be also used by openvswitch. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
-
Jiri Benc authored
After the 48d2ab60 ("net: mpls: Fixups for GSO"), MPLS handling in openvswitch was changed to have network header pointing to the start of the MPLS headers and inner_network_header pointing after the MPLS headers. However, key_extract was missed by the mentioned commit, causing incorrect headers to be set when a MPLS packet just enters the bridge or after it is recirculated. Fixes: 48d2ab60 ("net: mpls: Fixups for GSO") Signed-off-by:
-
Arnd Bergmann authored
If fi->fib_nhs is zero, the router interface pointer is uninitialized, as shown by this warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_router_fib_event': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1674:21: error: 'r' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1643:23: note: 'r' was declared here This changes the loop so we handle the case the same way as finding no router interface pointer attached to one of the nexthops to ensure we always trap here instead of using uninitialized data. Fixes: b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Arnd Bergmann authored
Build-testing this driver with -Wmaybe-uninitialized gives a new false-positive warning that I can't really explain: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'mlx5e_configure_flower': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:509:3: error: 'old_attr' may be used uninitialized in this function [-Werror=maybe-uninitialized] It's obvious from the code that 'old_attr' is initialized whenever 'old' is non-NULL here. The warning appears with all versions I tested from gcc-4.7 through gcc-6.1, and I could not come up with a way to rewrite the function in a more readable way that avoids the warning, so I'm adding another initialization to shut it up. Fixes: 8b32580d ("net/mlx5e: Add TC vlan action for SRIOV offloads") Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
