1. 04 Jun, 2014 40 commits
    • Vladimir Davydov's avatar
      memcg, slab: do not schedule cache destruction when last page goes away · 1e32e77f
      Vladimir Davydov authored
      This patchset is a part of preparations for kmemcg re-parenting.  It
      targets at simplifying kmemcg work-flows and synchronization.
      
      First, it removes async per memcg cache destruction (see patches 1, 2).
      Now caches are only destroyed on memcg offline.  That means the caches
      that are not empty on memcg offline will be leaked.  However, they are
      already leaked, because memcg_cache_params::nr_pages normally never drops
      to 0 so the destruction work is never scheduled except kmem_cache_shrink
      is called explicitly.  In the future I'm planning reaping such dead caches
      on vmpressure or periodically.
      
      Second, it substitutes per memcg slab_caches_mutex's with the global
      memcg_slab_mutex, which should be taken during the whole per memcg cache
      creation/destruction path before the slab_mutex (see patch 3).  This
      greatly simplifies synchronization among various per memcg cache
      creation/destruction paths.
      
      I'm still not quite sure about the end picture, in particular I don't know
      whether we should reap dead memcgs' kmem caches periodically or try to
      merge them with their parents (see https://lkml.org/lkml/2014/4/20/38 for
      more details), but whichever way we choose, this set looks like a
      reasonable change to me, because it greatly simplifies kmemcg work-flows
      and eases further development.
      
      This patch (of 3):
      
      After a memcg is offlined, we mark its kmem caches that cannot be deleted
      right now due to pending objects as dead by setting the
      memcg_cache_params::dead flag, so that memcg_release_pages will schedule
      cache destruction (memcg_cache_params::destroy) as soon as the last slab
      of the cache is freed (memcg_cache_params::nr_pages drops to zero).
      
      I guess the idea was to destroy the caches as soon as possible, i.e.
      immediately after freeing the last object.  However, it just doesn't work
      that way, because kmem caches always preserve some pages for the sake of
      performance, so that nr_pages never gets to zero unless the cache is
      shrunk explicitly using kmem_cache_shrink.  Of course, we could account
      the total number of objects on the cache or check if all the slabs
      allocated for the cache are empty on kmem_cache_free and schedule
      destruction if so, but that would be too costly.
      
      Thus we have a piece of code that works only when we explicitly call
      kmem_cache_shrink, but complicates the whole picture a lot.  Moreover,
      it's racy in fact.  For instance, kmem_cache_shrink may free the last slab
      and thus schedule cache destruction before it finishes checking that the
      cache is empty, which can lead to use-after-free.
      
      So I propose to remove this async cache destruction from
      memcg_release_pages, and check if the cache is empty explicitly after
      calling kmem_cache_shrink instead.  This will simplify things a lot w/o
      introducing any functional changes.
      
      And regarding dead memcg caches (i.e.  those that are left hanging around
      after memcg offline for they have objects), I suppose we should reap them
      either periodically or on vmpressure as Glauber suggested initially.  I'm
      going to implement this later.
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Glauber Costa <glommer@gmail.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1e32e77f
    • Michal Hocko's avatar
      memcg: do not hang on OOM when killed by userspace OOM access to memory reserves · d8dc595c
      Michal Hocko authored
      Eric has reported that he can see task(s) stuck in memcg OOM handler
      regularly.  The only way out is to
      
      	echo 0 > $GROUP/memory.oom_control
      
      His usecase is:
      
      - Setup a hierarchy with memory and the freezer (disable kernel oom and
        have a process watch for oom).
      
      - In that memory cgroup add a process with one thread per cpu.
      
      - In one thread slowly allocate once per second I think it is 16M of ram
        and mlock and dirty it (just to force the pages into ram and stay
        there).
      
      - When oom is achieved loop:
        * attempt to freeze all of the tasks.
        * if frozen send every task SIGKILL, unfreeze, remove the directory in
          cgroupfs.
      
      Eric has then pinpointed the issue to be memcg specific.
      
      All tasks are sitting on the memcg_oom_waitq when memcg oom is disabled.
      Those that have received fatal signal will bypass the charge and should
      continue on their way out.  The tricky part is that the exit path might
      trigger a page fault (e.g.  exit_robust_list), thus the memcg charge,
      while its memcg is still under OOM because nobody has released any charges
      yet.
      
      Unlike with the in-kernel OOM handler the exiting task doesn't get
      TIF_MEMDIE set so it doesn't shortcut further charges of the killed task
      and falls to the memcg OOM again without any way out of it as there are no
      fatal signals pending anymore.
      
      This patch fixes the issue by checking PF_EXITING early in
      mem_cgroup_try_charge and bypass the charge same as if it had fatal
      signal pending or TIF_MEMDIE set.
      
      Normally exiting tasks (aka not killed) will bypass the charge now but
      this should be OK as the task is leaving and will release memory and
      increasing the memory pressure just to release it in a moment seems
      dubious wasting of cycles.  Besides that charges after exit_signals should
      be rare.
      
      I am bringing this patch again (rebased on the current mmotm tree). I
      hope we can move forward finally. If there is still an opposition then
      I would really appreciate a concurrent approach so that we can discuss
      alternatives.
      
      http://comments.gmane.org/gmane.linux.kernel.stable/77650 is a reference
      to the followup discussion when the patch has been dropped from the mmotm
      last time.
      Reported-by: default avatarEric W. Biederman <ebiederm@xmission.com>
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.cz>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d8dc595c
    • Mel Gorman's avatar
      mm: vmscan: do not throttle based on pfmemalloc reserves if node has no ZONE_NORMAL · 675becce
      Mel Gorman authored
      throttle_direct_reclaim() is meant to trigger during swap-over-network
      during which the min watermark is treated as a pfmemalloc reserve.  It
      throttes on the first node in the zonelist but this is flawed.
      
      The user-visible impact is that a process running on CPU whose local
      memory node has no ZONE_NORMAL will stall for prolonged periods of time,
      possibly indefintely.  This is due to throttle_direct_reclaim thinking the
      pfmemalloc reserves are depleted when in fact they don't exist on that
      node.
      
      On a NUMA machine running a 32-bit kernel (I know) allocation requests
      from CPUs on node 1 would detect no pfmemalloc reserves and the process
      gets throttled.  This patch adjusts throttling of direct reclaim to
      throttle based on the first node in the zonelist that has a usable
      ZONE_NORMAL or lower zone.
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      675becce
    • Oleg Nesterov's avatar
      memcg: kill CONFIG_MM_OWNER · f98bafa0
      Oleg Nesterov authored
      CONFIG_MM_OWNER makes no sense.  It is not user-selectable, it is only
      selected by CONFIG_MEMCG automatically.  So we can kill this option in
      init/Kconfig and do s/CONFIG_MM_OWNER/CONFIG_MEMCG/ globally.
      Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f98bafa0
    • Huang Shijie's avatar
      mm/mmap.c: remove the first mapping check · 64ac4940
      Huang Shijie authored
      Remove the first mapping check for vma_link.  Move the mutex_lock into the
      braces when vma->vm_file is true.
      Signed-off-by: default avatarHuang Shijie <b32955@freescale.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      64ac4940
    • Jianyu Zhan's avatar
      mm/swap.c: clean up *lru_cache_add* functions · 2329d375
      Jianyu Zhan authored
      In mm/swap.c, __lru_cache_add() is exported, but actually there are no
      users outside this file.
      
      This patch unexports __lru_cache_add(), and makes it static.  It also
      exports lru_cache_add_file(), as it is use by cifs and fuse, which can
      loaded as modules.
      Signed-off-by: default avatarJianyu Zhan <nasa4836@gmail.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Shaohua Li <shli@kernel.org>
      Cc: Bob Liu <bob.liu@oracle.com>
      Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Rafael Aquini <aquini@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Khalid Aziz <khalid.aziz@oracle.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2329d375
    • Jonathan Gonzalez V's avatar
      drm/exynos: call find_vma with the mmap_sem held · cbe97414
      Jonathan Gonzalez V authored
      Performing vma lookups without taking the mm->mmap_sem is asking for
      trouble.  While doing the search, the vma in question can be modified or
      even removed before returning to the caller.  Take the lock (exclusively)
      in order to avoid races while iterating through the vmacache and/or
      rbtree.
      Signed-off-by: default avatarJonathan Gonzalez V <zeus@gnu.org>
      Signed-off-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Cc: Inki Dae <inki.dae@samsung.com>
      Cc: Joonyoung Shim <jy0922.shim@samsung.com>
      Cc: David Airlie <airlied@linux.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cbe97414
    • Davidlohr Bueso's avatar
      arc: call find_vma with the mmap_sem held · 5040573e
      Davidlohr Bueso authored
      Performing vma lookups without taking the mm->mmap_sem is asking for
      trouble.  While doing the search, the vma in question can be modified or
      even removed before returning to the caller.  Take the lock (shared) in
      order to avoid races while iterating through the vmacache and/or rbtree.
      
      [akpm@linux-foundation.org: CSE current->active_mm, per Vineet]
      Signed-off-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Acked-by: default avatarVineet Gupta <vgupta@synopsys.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5040573e
    • Vladimir Davydov's avatar
      Documentation/memcg: warn about incomplete kmemcg state · 2ee06468
      Vladimir Davydov authored
      Kmemcg is currently under development and lacks some important features.
      In particular, it does not have support of kmem reclaim on memory pressure
      inside cgroup, which practically makes it unusable in real life.  Let's
      warn about it in both Kconfig and Documentation to prevent complaints
      arising.
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2ee06468
    • Dave Hansen's avatar
      mm: debug: make bad_range() output more usable and readable · 613813e8
      Dave Hansen authored
      Nobody outputs memory addresses in decimal.  PFNs are essentially
      addresses, and they're gibberish in decimal.  Output them in hex.
      
      Also, add the nid and zone name to give a little more context to the
      message.
      Signed-off-by: default avatarDave Hansen <dave.hansen@linux.intel.com>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      613813e8
    • Vlastimil Babka's avatar
      mm/compaction: cleanup isolate_freepages() · c96b9e50
      Vlastimil Babka authored
      isolate_freepages() is currently somewhat hard to follow thanks to many
      looks like it is related to the 'low_pfn' variable, but in fact it is not.
      
      This patch renames the 'high_pfn' variable to a hopefully less confusing name,
      and slightly changes its handling without a functional change. A comment made
      obsolete by recent changes is also updated.
      
      [akpm@linux-foundation.org: comment fixes, per Minchan]
      [iamjoonsoo.kim@lge.com: cleanups]
      Signed-off-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Dongjun Shin <d.j.shin@samsung.com>
      Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
      Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c96b9e50
    • Heesub Shin's avatar
      mm/compaction: clean up unused code lines · 13fb44e4
      Heesub Shin authored
      Remove code lines currently not in use or never called.
      Signed-off-by: default avatarHeesub Shin <heesub.shin@samsung.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Dongjun Shin <d.j.shin@samsung.com>
      Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Dongjun Shin <d.j.shin@samsung.com>
      Cc: Sunghwan Yun <sunghwan.yun@samsung.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      13fb44e4
    • Vlastimil Babka's avatar
      mm/page_alloc: prevent MIGRATE_RESERVE pages from being misplaced · 5bcc9f86
      Vlastimil Babka authored
      For the MIGRATE_RESERVE pages, it is useful when they do not get
      misplaced on free_list of other migratetype, otherwise they might get
      allocated prematurely and e.g.  fragment the MIGRATE_RESEVE pageblocks.
      While this cannot be avoided completely when allocating new
      MIGRATE_RESERVE pageblocks in min_free_kbytes sysctl handler, we should
      prevent the misplacement where possible.
      
      Currently, it is possible for the misplacement to happen when a
      MIGRATE_RESERVE page is allocated on pcplist through rmqueue_bulk() as a
      fallback for other desired migratetype, and then later freed back
      through free_pcppages_bulk() without being actually used.  This happens
      because free_pcppages_bulk() uses get_freepage_migratetype() to choose
      the free_list, and rmqueue_bulk() calls set_freepage_migratetype() with
      the *desired* migratetype and not the page's original MIGRATE_RESERVE
      migratetype.
      
      This patch fixes the problem by moving the call to
      set_freepage_migratetype() from rmqueue_bulk() down to
      __rmqueue_smallest() and __rmqueue_fallback() where the actual page's
      migratetype (e.g.  from which free_list the page is taken from) is used.
      Note that this migratetype might be different from the pageblock's
      migratetype due to freepage stealing decisions.  This is OK, as page
      stealing never uses MIGRATE_RESERVE as a fallback, and also takes care
      to leave all MIGRATE_CMA pages on the correct freelist.
      
      Therefore, as an additional benefit, the call to
      get_pageblock_migratetype() from rmqueue_bulk() when CMA is enabled, can
      be removed completely.  This relies on the fact that MIGRATE_CMA
      pageblocks are created only during system init, and the above.  The
      related is_migrate_isolate() check is also unnecessary, as memory
      isolation has other ways to move pages between freelists, and drain pcp
      lists containing pages that should be isolated.  The buffered_rmqueue()
      can also benefit from calling get_freepage_migratetype() instead of
      get_pageblock_migratetype().
      Signed-off-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Reported-by: default avatarYong-Taek Lee <ytk.lee@samsung.com>
      Reported-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Suggested-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Acked-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
      Suggested-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarMinchan Kim <minchan@kernel.org>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Michal Nazarewicz <mina86@mina86.com>
      Cc: "Wang, Yalin" <Yalin.Wang@sonymobile.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5bcc9f86
    • Andrew Morton's avatar
    • Vladimir Davydov's avatar
      slab: get_online_mems for kmem_cache_{create,destroy,shrink} · 03afc0e2
      Vladimir Davydov authored
      When we create a sl[au]b cache, we allocate kmem_cache_node structures
      for each online NUMA node.  To handle nodes taken online/offline, we
      register memory hotplug notifier and allocate/free kmem_cache_node
      corresponding to the node that changes its state for each kmem cache.
      
      To synchronize between the two paths we hold the slab_mutex during both
      the cache creationg/destruction path and while tuning per-node parts of
      kmem caches in memory hotplug handler, but that's not quite right,
      because it does not guarantee that a newly created cache will have all
      kmem_cache_nodes initialized in case it races with memory hotplug.  For
      instance, in case of slub:
      
          CPU0                            CPU1
          ----                            ----
          kmem_cache_create:              online_pages:
           __kmem_cache_create:            slab_memory_callback:
                                            slab_mem_going_online_callback:
                                             lock slab_mutex
                                             for each slab_caches list entry
                                                 allocate kmem_cache node
                                             unlock slab_mutex
            lock slab_mutex
            init_kmem_cache_nodes:
             for_each_node_state(node, N_NORMAL_MEMORY)
                 allocate kmem_cache node
            add kmem_cache to slab_caches list
            unlock slab_mutex
                                          online_pages (continued):
                                           node_states_set_node
      
      As a result we'll get a kmem cache with not all kmem_cache_nodes
      allocated.
      
      To avoid issues like that we should hold get/put_online_mems() during
      the whole kmem cache creation/destruction/shrink paths, just like we
      deal with cpu hotplug.  This patch does the trick.
      
      Note, that after it's applied, there is no need in taking the slab_mutex
      for kmem_cache_shrink any more, so it is removed from there.
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Toshi Kani <toshi.kani@hp.com>
      Cc: Xishi Qiu <qiuxishi@huawei.com>
      Cc: Jiang Liu <liuj97@gmail.com>
      Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      03afc0e2
    • Vladimir Davydov's avatar
      mem-hotplug: implement get/put_online_mems · bfc8c901
      Vladimir Davydov authored
      kmem_cache_{create,destroy,shrink} need to get a stable value of
      cpu/node online mask, because they init/destroy/access per-cpu/node
      kmem_cache parts, which can be allocated or destroyed on cpu/mem
      hotplug.  To protect against cpu hotplug, these functions use
      {get,put}_online_cpus.  However, they do nothing to synchronize with
      memory hotplug - taking the slab_mutex does not eliminate the
      possibility of race as described in patch 2.
      
      What we need there is something like get_online_cpus, but for memory.
      We already have lock_memory_hotplug, which serves for the purpose, but
      it's a bit of a hammer right now, because it's backed by a mutex.  As a
      result, it imposes some limitations to locking order, which are not
      desirable, and can't be used just like get_online_cpus.  That's why in
      patch 1 I substitute it with get/put_online_mems, which work exactly
      like get/put_online_cpus except they block not cpu, but memory hotplug.
      
      [ v1 can be found at https://lkml.org/lkml/2014/4/6/68.  I NAK'ed it by
        myself, because it used an rw semaphore for get/put_online_mems,
        making them dead lock prune.  ]
      
      This patch (of 2):
      
      {un}lock_memory_hotplug, which is used to synchronize against memory
      hotplug, is currently backed by a mutex, which makes it a bit of a
      hammer - threads that only want to get a stable value of online nodes
      mask won't be able to proceed concurrently.  Also, it imposes some
      strong locking ordering rules on it, which narrows down the set of its
      usage scenarios.
      
      This patch introduces get/put_online_mems, which are the same as
      get/put_online_cpus, but for memory hotplug, i.e.  executing a code
      inside a get/put_online_mems section will guarantee a stable value of
      online nodes, present pages, etc.
      
      lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether.
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: Tang Chen <tangchen@cn.fujitsu.com>
      Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Toshi Kani <toshi.kani@hp.com>
      Cc: Xishi Qiu <qiuxishi@huawei.com>
      Cc: Jiang Liu <liuj97@gmail.com>
      Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Wen Congyang <wency@cn.fujitsu.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bfc8c901
    • Vladimir Davydov's avatar
      memcg: un-export __memcg_kmem_get_cache · e8d9df3a
      Vladimir Davydov authored
      It is only used in slab and should not be used anywhere else so there is
      no need in exporting it.
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e8d9df3a
    • Mel Gorman's avatar
      mm: page_alloc: do not cache reclaim distances · 5f7a75ac
      Mel Gorman authored
      pgdat->reclaim_nodes tracks if a remote node is allowed to be reclaimed
      by zone_reclaim due to its distance.  As it is expected that
      zone_reclaim_mode will be rarely enabled it is unreasonable for all
      machines to take a penalty.  Fortunately, the zone_reclaim_mode() path
      is already slow and it is the path that takes the hit.
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Reviewed-by: default avatarChristoph Lameter <cl@linux.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5f7a75ac
    • Mel Gorman's avatar
      mm: disable zone_reclaim_mode by default · 4f9b16a6
      Mel Gorman authored
      When it was introduced, zone_reclaim_mode made sense as NUMA distances
      punished and workloads were generally partitioned to fit into a NUMA
      node.  NUMA machines are now common but few of the workloads are
      NUMA-aware and it's routine to see major performance degradation due to
      zone_reclaim_mode being enabled but relatively few can identify the
      problem.
      
      Those that require zone_reclaim_mode are likely to be able to detect
      when it needs to be enabled and tune appropriately so lets have a
      sensible default for the bulk of users.
      
      This patch (of 2):
      
      zone_reclaim_mode causes processes to prefer reclaiming memory from
      local node instead of spilling over to other nodes.  This made sense
      initially when NUMA machines were almost exclusively HPC and the
      workload was partitioned into nodes.  The NUMA penalties were
      sufficiently high to justify reclaiming the memory.  On current machines
      and workloads it is often the case that zone_reclaim_mode destroys
      performance but not all users know how to detect this.  Favour the
      common case and disable it by default.  Users that are sophisticated
      enough to know they need zone_reclaim_mode will detect it.
      Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Reviewed-by: default avatarChristoph Lameter <cl@linux.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4f9b16a6
    • Luiz Capitulino's avatar
      hugetlb: add support for gigantic page allocation at runtime · 944d9fec
      Luiz Capitulino authored
      HugeTLB is limited to allocating hugepages whose size are less than
      MAX_ORDER order.  This is so because HugeTLB allocates hugepages via the
      buddy allocator.  Gigantic pages (that is, pages whose size is greater
      than MAX_ORDER order) have to be allocated at boottime.
      
      However, boottime allocation has at least two serious problems.  First,
      it doesn't support NUMA and second, gigantic pages allocated at boottime
      can't be freed.
      
      This commit solves both issues by adding support for allocating gigantic
      pages during runtime.  It works just like regular sized hugepages,
      meaning that the interface in sysfs is the same, it supports NUMA, and
      gigantic pages can be freed.
      
      For example, on x86_64 gigantic pages are 1GB big. To allocate two 1G
      gigantic pages on node 1, one can do:
      
       # echo 2 > \
         /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
      
      And to free them all:
      
       # echo 0 > \
         /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
      
      The one problem with gigantic page allocation at runtime is that it
      can't be serviced by the buddy allocator.  To overcome that problem,
      this commit scans all zones from a node looking for a large enough
      contiguous region.  When one is found, it's allocated by using CMA, that
      is, we call alloc_contig_range() to do the actual allocation.  For
      example, on x86_64 we scan all zones looking for a 1GB contiguous
      region.  When one is found, it's allocated by alloc_contig_range().
      
      One expected issue with that approach is that such gigantic contiguous
      regions tend to vanish as runtime goes by.  The best way to avoid this
      for now is to make gigantic page allocations very early during system
      boot, say from a init script.  Other possible optimization include using
      compaction, which is supported by CMA but is not explicitly used by this
      commit.
      
      It's also important to note the following:
      
       1. Gigantic pages allocated at boottime by the hugepages= command-line
          option can be freed at runtime just fine
      
       2. This commit adds support for gigantic pages only to x86_64. The
          reason is that I don't have access to nor experience with other archs.
          The code is arch indepedent though, so it should be simple to add
          support to different archs
      
       3. I didn't add support for hugepage overcommit, that is allocating
          a gigantic page on demand when
         /proc/sys/vm/nr_overcommit_hugepages > 0. The reason is that I don't
         think it's reasonable to do the hard and long work required for
         allocating a gigantic page at fault time. But it should be simple
         to add this if wanted
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: default avatarLuiz Capitulino <lcapitulino@redhat.com>
      Reviewed-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Reviewed-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      944d9fec
    • Luiz Capitulino's avatar
      hugetlb: move helpers up in the file · 1cac6f2c
      Luiz Capitulino authored
      Next commit will add new code which will want to call
      for_each_node_mask_to_alloc() macro.  Move it, its buddy
      for_each_node_mask_to_free() and their dependencies up in the file so the
      new code can use them.  This is just code movement, no logic change.
      Signed-off-by: default avatarLuiz Capitulino <lcapitulino@redhat.com>
      Reviewed-by: default avatarAndrea Arcangeli <aarcange@redhat.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Reviewed-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Reviewed-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1cac6f2c
    • Luiz Capitulino's avatar
      hugetlb: update_and_free_page(): don't clear PG_reserved bit · a7407a27
      Luiz Capitulino authored
      Hugepages pages never get the PG_reserved bit set, so don't clear it.
      
      However, note that if the bit gets mistakenly set free_pages_check() will
      catch it.
      Signed-off-by: default avatarLuiz Capitulino <lcapitulino@redhat.com>
      Reviewed-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a7407a27
    • Luiz Capitulino's avatar
      hugetlb: add hstate_is_gigantic() · bae7f4ae
      Luiz Capitulino authored
      Signed-off-by: default avatarLuiz Capitulino <lcapitulino@redhat.com>
      Reviewed-by: default avatarAndrea Arcangeli <aarcange@redhat.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Reviewed-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Reviewed-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bae7f4ae
    • Luiz Capitulino's avatar
      hugetlb: prep_compound_gigantic_page(): drop __init marker · 2906dd52
      Luiz Capitulino authored
      The HugeTLB subsystem uses the buddy allocator to allocate hugepages
      during runtime.  This means that hugepages allocation during runtime is
      limited to MAX_ORDER order.  For archs supporting gigantic pages (that
      is, page sizes greater than MAX_ORDER), this in turn means that those
      pages can't be allocated at runtime.
      
      HugeTLB supports gigantic page allocation during boottime, via the boot
      allocator.  To this end the kernel provides the command-line options
      hugepagesz= and hugepages=, which can be used to instruct the kernel to
      allocate N gigantic pages during boot.
      
      For example, x86_64 supports 2M and 1G hugepages, but only 2M hugepages
      can be allocated and freed at runtime.  If one wants to allocate 1G
      gigantic pages, this has to be done at boot via the hugepagesz= and
      hugepages= command-line options.
      
      Now, gigantic page allocation at boottime has two serious problems:
      
       1. Boottime allocation is not NUMA aware. On a NUMA machine the kernel
          evenly distributes boottime allocated hugepages among nodes.
      
          For example, suppose you have a four-node NUMA machine and want
          to allocate four 1G gigantic pages at boottime. The kernel will
          allocate one gigantic page per node.
      
          On the other hand, we do have users who want to be able to specify
          which NUMA node gigantic pages should allocated from. So that they
          can place virtual machines on a specific NUMA node.
      
       2. Gigantic pages allocated at boottime can't be freed
      
      At this point it's important to observe that regular hugepages allocated
      at runtime don't have those problems.  This is so because HugeTLB
      interface for runtime allocation in sysfs supports NUMA and runtime
      allocated pages can be freed just fine via the buddy allocator.
      
      This series adds support for allocating gigantic pages at runtime.  It
      does so by allocating gigantic pages via CMA instead of the buddy
      allocator.  Releasing gigantic pages is also supported via CMA.  As this
      series builds on top of the existing HugeTLB interface, it makes gigantic
      page allocation and releasing just like regular sized hugepages.  This
      also means that NUMA support just works.
      
      For example, to allocate two 1G gigantic pages on node 1, one can do:
      
       # echo 2 > \
         /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
      
      And, to release all gigantic pages on the same node:
      
       # echo 0 > \
         /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages
      
      Please, refer to patch 5/5 for full technical details.
      
      Finally, please note that this series is a follow up for a previous series
      that tried to extend the command-line options set to be NUMA aware:
      
       http://marc.info/?l=linux-mm&m=139593335312191&w=2
      
      During the discussion of that series it was agreed that having runtime
      allocation support for gigantic pages was a better solution.
      
      This patch (of 5):
      
      This function is going to be used by non-init code in a future
      commit.
      Signed-off-by: default avatarLuiz Capitulino <lcapitulino@redhat.com>
      Reviewed-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Davidlohr Bueso <davidlohr@hp.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2906dd52
    • Duan Jiong's avatar
      mm/mmap.c: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO · 14bd5b45
      Duan Jiong authored
      Fix a coccinelle error regarding usage of IS_ERR and PTR_ERR instead of
      PTR_ERR_OR_ZERO.
      Signed-off-by: default avatarDuan Jiong <duanj.fnst@cn.fujitsu.com>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      14bd5b45
    • Vladimir Davydov's avatar
      slab: document kmalloc_order · cea371f4
      Vladimir Davydov authored
      Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cea371f4
    • Li Zhong's avatar
      memory-hotplug: update documentation to hide information about SECTIONS and remove end_phys_index · 56a3c655
      Li Zhong authored
      Seems we all agree that information about SECTION, e.g. section size,
      sections per memory block should be kept as kernel internals, and not
      exposed to userspace.
      
      This patch updates Documentation/memory-hotplug.txt to refer to memory
      blocks instead of memory sections where appropriate and added a
      paragraph to explain that memory blocks are made of memory sections.
      The documentation update is mostly provided by Nathan.
      
      Also, as end_phys_index in code is actually not the end section id, but
      the end memory block id, which should always be the same as phys_index.
      So it is removed here.
      Signed-off-by: default avatarLi Zhong <zhong@linux.vnet.ibm.com>
      Reviewed-by: default avatarZhang Yanfei <zhangyanfei@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      56a3c655
    • Dave Hansen's avatar
      mm: pass VM_BUG_ON() reason to dump_page() · e4f67422
      Dave Hansen authored
      I recently added a patch to let folks pass a "reason" string dump_page()
      which gets dumped out along with the page's data.  This essentially
      saves the bug-reader a trip in to the source to figure out why we
      BUG_ON()'d.
      
      The new VM_BUG_ON_PAGE() passes in NULL for "reason".  It seems like we
      might as well pass the BUG_ON() condition if we have it.  This will
      bloat kernels a bit with ~160 new strings, but this is all under a
      debugging option anyway.
      
      	page:ffffea0008560280 count:1 mapcount:0 mapping:(null) index:0x0
      	page flags: 0xbfffc0000000001(locked)
      	page dumped because: VM_BUG_ON_PAGE(PageLocked(page))
      	------------[ cut here ]------------
      	kernel BUG at /home/davehans/linux.git/mm/filemap.c:464!
      	invalid opcode: 0000 [#1] SMP
      	CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #251
      	Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      	...
      
      [akpm@linux-foundation.org: include stringify.h]
      Signed-off-by: default avatarDave Hansen <dave.hansen@linux.intel.com>
      Acked-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Acked-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e4f67422
    • Johannes Weiner's avatar
      mm: memcontrol: remove hierarchy restrictions for swappiness and oom_control · 3dae7fec
      Johannes Weiner authored
      Per-memcg swappiness and oom killing can currently not be tweaked on a
      memcg that is part of a hierarchy, but not the root of that hierarchy.
      Users have complained that they can't configure this when they turned on
      hierarchy mode.  In fact, with hierarchy mode becoming the default, this
      restriction disables the tunables entirely.
      
      But there is no good reason for this restriction.  The settings for
      swappiness and OOM killing are taken from whatever memcg whose limit
      triggered reclaim and OOM invocation, regardless of its position in the
      hierarchy tree.
      
      Allow setting swappiness on any group.  The knob on the root memcg
      already reads the global VM swappiness, make it writable as well.
      
      Allow disabling the OOM killer on any non-root memcg.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3dae7fec
    • Sebastian Ott's avatar
      mm/mempool: warn about __GFP_ZERO usage · 8bf8fcb0
      Sebastian Ott authored
      Memory obtained via mempool_alloc is not always zeroed even when
      called with __GFP_ZERO. Add a note and VM_BUG_ON statement to make
      that clear.
      
      [akpm@linux-foundation.org: use VM_WARN_ON_ONCE]
      Signed-off-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8bf8fcb0
    • Andrew Morton's avatar
      include/linux/mmdebug.h: add VM_WARN_ON() and VM_WARN_ON_ONCE() · 02a8efed
      Andrew Morton authored
      WARN_ON() and WARN_ON_ONCE(), dependent on CONFIG_DEBUG_VM
      
      Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      02a8efed
    • Andrew Morton's avatar
      mm/huge_memory.c: complete conversion to pr_foo() · ae3a8c1c
      Andrew Morton authored
      It was using a mix of pr_foo() and printk(KERN_ERR ...).
      
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ae3a8c1c
    • Kirill A. Shutemov's avatar
      thp: consolidate assert checks in __split_huge_page() · ff9e43eb
      Kirill A. Shutemov authored
      It doesn't make sense to have two assert checks for each invariant: one
      for printing and one for BUG().
      
      Let's trigger BUG() if we print error message.
      Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ff9e43eb
    • Akinobu Mita's avatar
      arch/x86/kernel/pci-dma.c: fix dma_generic_alloc_coherent() when CONFIG_DMA_CMA is enabled · 38f7ea5a
      Akinobu Mita authored
      dma_generic_alloc_coherent() firstly attempts to allocate by
      dma_alloc_from_contiguous() if CONFIG_DMA_CMA is enabled.  But the
      memory region allocated by it may not fit within the device's DMA mask.
      This change makes it fall back to usual alloc_pages_node() allocation
      for such cases.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Don Dutile <ddutile@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      38f7ea5a
    • Akinobu Mita's avatar
      cma: add placement specifier for "cma=" kernel parameter · 5ea3b1b2
      Akinobu Mita authored
      Currently, "cma=" kernel parameter is used to specify the size of CMA,
      but we can't specify where it is located.  We want to locate CMA below
      4GB for devices only supporting 32-bit addressing on 64-bit systems
      without iommu.
      
      This enables to specify the placement of CMA by extending "cma=" kernel
      parameter.
      
      Examples:
       1. locate 64MB CMA below 4GB by "cma=64M@0-4G"
       2. locate 64MB CMA exact at 512MB by "cma=64M@512M"
      
      Note that the DMA contiguous memory allocator on x86 assumes that
      page_address() works for the pages to allocate.  So this change requires
      to limit end address of contiguous memory area upto max_pfn_mapped to
      prevent from locating it on highmem area by the argument of
      dma_contiguous_reserve().
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Don Dutile <ddutile@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5ea3b1b2
    • Akinobu Mita's avatar
      memblock: introduce memblock_alloc_range() · 2bfc2862
      Akinobu Mita authored
      This introduces memblock_alloc_range() which allocates memblock from the
      specified range of physical address.  I would like to use this function
      to specify the location of CMA.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Don Dutile <ddutile@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2bfc2862
    • Akinobu Mita's avatar
      intel-iommu: integrate DMA CMA · 36746436
      Akinobu Mita authored
      This adds support for the DMA Contiguous Memory Allocator for
      intel-iommu.  This change enables dma_alloc_coherent() to allocate big
      contiguous memory.
      
      It is achieved in the same way as nommu_dma_ops currently does, i.e.
      trying to allocate memory by dma_alloc_from_contiguous() and
      alloc_pages() is used as a fallback.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Don Dutile <ddutile@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      36746436
    • Akinobu Mita's avatar
      x86: enable DMA CMA with swiotlb · 9c5a3621
      Akinobu Mita authored
      The DMA Contiguous Memory Allocator support on x86 is disabled when
      swiotlb config option is enabled.  So DMA CMA is always disabled on
      x86_64 because swiotlb is always enabled.  This attempts to support for
      DMA CMA with enabling swiotlb config option.
      
      The contiguous memory allocator on x86 is integrated in the function
      dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops
      for dma_alloc_coherent().
      
      x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops
      tries to allocate with dma_generic_alloc_coherent() firstly and then
      swiotlb_alloc_coherent() is called as a fallback.
      
      The main part of supporting DMA CMA with swiotlb is that changing
      x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops
      for dma_free_coherent() so that it can distinguish memory allocated by
      dma_generic_alloc_coherent() from one allocated by
      swiotlb_alloc_coherent() and release it with dma_generic_free_coherent()
      which can handle contiguous memory.  This change requires making
      is_swiotlb_buffer() global function.
      
      This also needs to change .free callback in the dma_map_ops for amd_gart
      and sta2x11, because these dma_ops are also using
      dma_generic_alloc_coherent().
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Acked-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
      Acked-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Don Dutile <ddutile@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9c5a3621
    • Akinobu Mita's avatar
      x86: make dma_alloc_coherent() return zeroed memory if CMA is enabled · d92ef66c
      Akinobu Mita authored
      This patchset enhances the DMA Contiguous Memory Allocator on x86.
      
      Currently the DMA CMA is only supported with pci-nommu dma_map_ops and
      furthermore it can't be enabled on x86_64.  But I would like to allocate
      big contiguous memory with dma_alloc_coherent() and tell it to the device
      that requires it, regardless of which dma mapping implementation is
      actually used in the system.
      
      So this makes it work with swiotlb and intel-iommu dma_map_ops, too.  And
      this also extends "cma=" kernel parameter to specify placement constraint
      by the physical address range of memory allocations.  For example, CMA
      allocates memory below 4GB by "cma=64M@0-4G", it is required for the
      devices only supporting 32-bit addressing on 64-bit systems without iommu.
      
      This patch (of 5):
      
      Calling dma_alloc_coherent() with __GFP_ZERO must return zeroed memory.
      
      But when the contiguous memory allocator (CMA) is enabled on x86 and the
      memory region is allocated by dma_alloc_from_contiguous(), it doesn't
      return zeroed memory.  Because dma_generic_alloc_coherent() forgot to fill
      the memory region with zero if it was allocated by
      dma_alloc_from_contiguous()
      
      Most implementations of dma_alloc_coherent() return zeroed memory
      regardless of whether __GFP_ZERO is specified.  So this fixes it by
      unconditionally zeroing the allocated memory region.
      
      Alternatively, we could fix dma_alloc_from_contiguous() to return zeroed
      out memory and remove memset() from all caller of it.  But we can't simply
      remove the memset on arm because __dma_clear_buffer() is used there for
      ensuring cache flushing and it is used in many places.  Of course we can
      do redundant memset in dma_alloc_from_contiguous(), but I think this patch
      is less impact for fixing this problem.
      Signed-off-by: default avatarAkinobu Mita <akinobu.mita@gmail.com>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: David Woodhouse <dwmw2@infradead.org>
      Cc: Don Dutile <ddutile@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Cc: Yinghai Lu <yinghai@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d92ef66c
    • Davidlohr Bueso's avatar
      mm,vmacache: optimize overflow system-wide flushing · 6b4ebc3a
      Davidlohr Bueso authored
      For single threaded workloads, we can avoid flushing and iterating through
      the entire list of tasks, making the whole function a lot faster,
      requiring only a single atomic read for the mm_users.
      Signed-off-by: default avatarDavidlohr Bueso <davidlohr@hp.com>
      Suggested-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Aswin Chandramouleeswaran <aswin@hp.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6b4ebc3a