When calculating crc for hash index we use the function crc32 that
calculates for little-endian (LE) arch.
Then we convert it to network endianness using htonl(), but it's wrong
to do the conversion in BE archs since the crc32 value is already LE.

The solution is to switch the bytes from the crc result for all types
of arc.

Fixes: 40416d8e ("net/mlx5: DR, Replace CRC32 implementation to use kernel lib")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In case user switch a device from switchdev mode to legacy mode, mlx5
first unpair the E-switch and afterwards unload the uplink vport.
From the other hand, in case user remove or reload a device, mlx5
first unload the uplink vport and afterwards unpair the E-switch.

The latter is causing a bug[1], hence, handle pairing of E-switch as
part of uplink un/load APIs.

[1]
In case VF_LAG is used, every tc fdb flow is duplicated to the peer
esw. However, the original esw keeps a pointer to this duplicated
flow, not the peer esw.
e.g.: if user create tc fdb flow over esw0, the flow is duplicated
over esw1, in FW/HW, but in SW, esw0 keeps a pointer to the duplicated
flow.
During module unload while a peer tc fdb flow is still offloaded, in
case the first device to be removed is the peer device (esw1 in the
example above), the peer net-dev is destroyed, and so the mlx5e_priv
is memset to 0.
Afterwards, the peer device is trying to unpair himself from the
original device (esw0 in the example above). Unpair API invoke the
original device to clear peer flow from its eswitch (esw0), but the
peer flow, which is stored over the original eswitch (esw0), is
trying to use the peer mlx5e_priv, which is memset to 0 and result in
bellow kernel-oops.

[  157.964081 ] BUG: unable to handle page fault for address: 000000000002ce60
[  157.964662 ] #PF: supervisor read access in kernel mode
[  157.965123 ] #PF: error_code(0x0000) - not-present page
[  157.965582 ] PGD 0 P4D 0
[  157.965866 ] Oops: 0000 [#1] SMP
[  157.967670 ] RIP: 0010:mlx5e_tc_del_fdb_flow+0x48/0x460 [mlx5_core]
[  157.976164 ] Call Trace:
[  157.976437 ]  <TASK>
[  157.976690 ]  __mlx5e_tc_del_fdb_peer_flow+0xe6/0x100 [mlx5_core]
[  157.977230 ]  mlx5e_tc_clean_fdb_peer_flows+0x67/0x90 [mlx5_core]
[  157.977767 ]  mlx5_esw_offloads_unpair+0x2d/0x1e0 [mlx5_core]
[  157.984653 ]  mlx5_esw_offloads_devcom_event+0xbf/0x130 [mlx5_core]
[  157.985212 ]  mlx5_devcom_send_event+0xa3/0xb0 [mlx5_core]
[  157.985714 ]  esw_offloads_disable+0x5a/0x110 [mlx5_core]
[  157.986209 ]  mlx5_eswitch_disable_locked+0x152/0x170 [mlx5_core]
[  157.986757 ]  mlx5_eswitch_disable+0x51/0x80 [mlx5_core]
[  157.987248 ]  mlx5_unload+0x2a/0xb0 [mlx5_core]
[  157.987678 ]  mlx5_uninit_one+0x5f/0xd0 [mlx5_core]
[  157.988127 ]  remove_one+0x64/0xe0 [mlx5_core]
[  157.988549 ]  pci_device_remove+0x31/0xa0
[  157.988933 ]  device_release_driver_internal+0x18f/0x1f0
[  157.989402 ]  driver_detach+0x3f/0x80
[  157.989754 ]  bus_remove_driver+0x70/0xf0
[  157.990129 ]  pci_unregister_driver+0x34/0x90
[  157.990537 ]  mlx5_cleanup+0xc/0x1c [mlx5_core]
[  157.990972 ]  __x64_sys_delete_module+0x15a/0x250
[  157.991398 ]  ? exit_to_user_mode_prepare+0xea/0x110
[  157.991840 ]  do_syscall_64+0x3d/0x90
[  157.992198 ]  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 04de7dda ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Fixes: 1418ddd9 ("net/mlx5e: Duplicate offloaded TC eswitch rules under uplink LAG")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

DEVX can issue a general command, which is not used by mlx5 driver.
In case such command is failed, mlx5 is trying to collect the failure
data, However, mlx5 doesn't create a storage for this command, since
mlx5 doesn't use it. This lead to array-index-out-of-bounds error.

Fix it by checking whether the command is known before collecting the
failure data.

Fixes: 34f46ae0 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

	sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL);
	^^^^                         ^^^^

sock_alloc_file() calls release_sock() on error but the left hand
side of the assignment dereferences "sock".  This isn't the bug and
I didn't report this earlier because there is an assert that it
doesn't fail.

net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed.
net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed.
net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed.
net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451609436.45209.15407022385441542980.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The "handshake_req_alloc excessive privsize" kunit test is intended
to check what happens when the maximum privsize is exceeded. The
WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for
this test.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 88232ec1 ("net/handshake: Add Kunit tests for the handshake consumer API")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/168451636052.47152.9600443326570457947.stgit@oracle-102.nfsv4bat.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Should tc589_config() fail, some resources need to be released as already
done in the remove function.

Fixes: 15b99ac1 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If an error occures after calling nv_mgmt_acquire_sema(), it should be
undone with a corresponding nv_mgmt_release_sema() call.

Add it in the error handling path of the probe as already done in the
remove function.

Fixes: cac1c52c ("forcedeth: mgmt unit interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Link: https://lore.kernel.org/r/355e9a7d351b32ad897251b6f81b5886fcdc6766.1684571393.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When doing plpmtu probe, the probe size is growing every time when it
receives the ACK during the Search state until the probe fails. When
the failure occurs, pl.probe_high is set and it goes to the Complete
state.

However, if the link pmtu is huge, like 65535 in loopback_dev, the probe
eventually keeps using SCTP_MAX_PLPMTU as the probe size and never fails.
Because of that, pl.probe_high can not be set, and the plpmtu probe can
never go to the Complete state.

Fix it by setting pl.probe_high to SCTP_MAX_PLPMTU when the probe size
grows to SCTP_MAX_PLPMTU in sctp_transport_pl_recv(). Also, not allow
the probe size greater than SCTP_MAX_PLPMTU in the Complete state.

Fixes: b87641af ("sctp: do state transition when a probe succeeds on HB ACK recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix compiler warnings on btnxpuart
 - Fix potential double free on hci_conn_unlink
 - Fix UAF on hci_conn_hash_flush

* tag 'for-net-2023-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: btnxpuart: Fix compiler warnings
  Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
  Bluetooth: Fix UAF in hci_conn_hash_flush again
  Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
  Bluetooth: Fix potential double free caused by hci_conn_unlink
====================

Link: https://lore.kernel.org/r/20230519233056.2024340-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.

       team0
         |
  +------+------+-----+-----+
  |      |      |     |     |
team1  team2  team3  ...  team200

If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.

But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.

Reproducer:

ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
        ip link add team$i master team0 type team
        ethtool -K team$i lro on
done

ethtool -K team0 lro off

In order to fix it, the notifier_ctx member of bonding/team is introduced.

Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This fixes the follwing compiler warning reported by kernel test robot:

  drivers/bluetooth/btnxpuart.c:1332:34: warning: unused variable
  'nxpuart_of_match_table' [-Wunused-const-variable]
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305161345.eClvTYQ9-lkp@intel.com/Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and
CIS connections, i.e., everything except LE connections. However, if
(e)SCO connections are unlinked when BR/EDR disconnects, CIS connections
should also be unlinked when LE disconnects.

In terms of disconnection behavior, CIS and (e)SCO connections are not
too different. One peculiarity of CIS is that when CIS connections are
disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE
SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command:

        All SCO, eSCO, and CIS connections on a physical link should be
        disconnected before the ACL connection on the same physical
        connection is disconnected. If it does not, they will be
        implicitly disconnected as part of the ACL disconnection.
        ...
        Note: As specified in Section 7.7.5, on the Central, the handle
        for a CIS remains valid even after disconnection and, therefore,
        the Host can recreate a disconnected CIS at a later point in
        time using the same connection handle.

Since hci_conn_link invokes both hci_conn_get and hci_conn_hold,
hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as
well. However, currently it performs only hci_conn_put.

This patch makes hci_conn_unlink call hci_conn_drop as well, which
simplifies the logic in hci_conn_del a bit and may benefit future users
of hci_conn_unlink. But it is noted that this change additionally
implies that hci_conn_unlink can queue disc_work on conn itself, with
the following call stack:

        hci_conn_unlink(conn)  [conn->parent == NULL]
                -> hci_conn_unlink(child)  [child->parent == conn]
                        -> hci_conn_drop(child->parent)
                                -> queue_delayed_work(&conn->disc_work)

Queued disc_work after hci_conn_del can be spurious, so during the
process of hci_conn_del, it is necessary to make the call to
cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Commit 06149746 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e ("Bluetooth: hci_conn: Fix
possible UAF").

The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.

This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.

Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.

Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/
Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

If hci_conn_put(conn->parent) reduces conn->parent's reference count to
zero, it can immediately deallocate conn->parent. At the same time,
conn->link->list has its head in conn->parent, causing use-after-free
problems in the latter list_del_rcu(&conn->link->list).

This problem can be easily solved by reordering the two operations,
i.e., first performing the list removal with list_del_rcu and then
decreasing the refcnt with hci_conn_put.
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/
Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The hci_conn_unlink function is being called by hci_conn_del, which
means it should not call hci_conn_del with the input parameter conn
again. If it does, conn may have already been released when
hci_conn_unlink returns, leading to potential UAF and double-free
issues.

This patch resolves the problem by modifying hci_conn_unlink to release
only conn's child links when necessary, but never release conn itself.

Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000484a8205faafe216@google.com/
Fixes: 06149746 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com

Two dma_wmb() are added in the XDP TX path to ensure proper ordering of
descriptor and buffer updates:
1. A dma_wmb() is added after updating the last BD to make sure
   the updates to rest of the descriptor are visible before
   transferring ownership to FEC.
2. A dma_wmb() is also added after updating the bdp to ensure these
   updates are visible before updating txq->bd.cur.
3. Start the xmit of the frame immediately right after configuring the
   tx descriptor.

Fixes: 6d6b39f1 ("net: fec: add initial XDP support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I would like to be copied on new patches submitted on this driver.
I am relatively familiar with the code, having practically maintained
it for a while.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.

Fixes: 86d74760 ("octeontx2-pf: TCP segmentation offload support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid early devlink info return if errors arise with MCDI commands
executed for getting the required info from the device. The rationale
is some commands can fail but later ones could still give useful data.
Moreover, some nvram partitions could not be present which needs to be
handled as a non error.

The specific errors are reported through system messages and if any
error appears, it will be reported generically through extack.

Fixes 14743ddd ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:

- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>

 BUG: kernel NULL pointer dereference, address: 0000000000000014
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G        W   E      6.4.0-rc1+ #42
 Workqueue: smc_hs_wq smc_listen_work [smc]
 RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
 RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06
 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000
 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00
 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000
 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180
 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001
 FS:  0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
  ? smcr_buf_map_link+0x24b/0x290 [smc]
  ? __smc_buf_create+0x4ee/0x9b0 [smc]
  smc_clc_send_accept+0x4c/0xb0 [smc]
  smc_listen_work+0x346/0x650 [smc]
  ? __schedule+0x279/0x820
  process_one_work+0x1e5/0x3f0
  worker_thread+0x4d/0x2f0
  ? __pfx_worker_thread+0x10/0x10
  kthread+0xe5/0x120
  ? __pfx_kthread+0x10/0x10
  ret_from_fork+0x2c/0x50
  </TASK>

During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().

If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.

When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.

Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.

 | Try SMCRv2 device first
 |     |-> conn->lgr:	assign existed SMCRv2 link group;
 |     |-> conn->link:	assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
 |     |-> sndbuf & RMB creation fails, quit;
 |
 | Try SMCRv1 device then
 |     |-> conn->lgr:	create SMCRv1 link group and assign;
 |     |-> conn->link:	keep SMCRv2 link mistakenly;
 |     |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
 |         initialized.
 |
 | Then smc_clc_send_confirm_accept() accesses
 | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
 v

This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration.

Fixes: e49300a6 ("net/smc: add listen processing for SMC-Rv2")
Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()

  Tests passed: 201
  Tests failed:   0
  Cannot remove namespace file "/run/netns/ns1": No such file or directory

This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.

Redirect the error message to /dev/null to mute it.

V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2

Fixes: b60417a9 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NAPI gets called with budget of 0 from netpoll, which has interrupts
disabled. We should try to free some space on Tx rings and nothing
else.

Specifically do not try to handle XDP TX or try to refill Rx buffers -
we can't use the page pool from IRQ context. Don't check if IRQs moved,
either, that makes no sense in netpoll. Netpoll calls _all_ the rings
from whatever CPU it happens to be invoked on.

In general do as little as possible, the work quickly adds up when
there's tens of rings to poll.

The immediate stack trace I was seeing is:

    __do_softirq+0xd1/0x2c0
    __local_bh_enable_ip+0xc7/0x120
    </IRQ>
    <TASK>
    page_pool_put_defragged_page+0x267/0x320
    mlx5e_free_xdpsq_desc+0x99/0xd0
    mlx5e_poll_xdpsq_cq+0x138/0x3b0
    mlx5e_napi_poll+0xc3/0x8b0
    netpoll_poll_dev+0xce/0x150

AFAIU page pool takes a BH lock, releases it and since BH is now
enabled tries to run softirqs.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 60bbf7ee ("mlx5: use page_pool for xdp_return_frame call")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: rx: strp: fix inline crypto offload

The local strparser version I added to TLS does not preserve
decryption status, which breaks inline crypto (NIC offload).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.

We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.

Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.

Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We'll need to copy input skbs individually in the next patch.
Factor that code out (without assuming we're copying a full record).
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We call tls_rx_msg_size(skb) before doing skb->len += chunk.
So the tls_rx_msg_size() code will see old skb->len, most
likely leading to an over-read.

Worst case we will over read an entire record, next iteration
will try to trim the skb but may end up turning frag len negative
or discarding the subsequent record (since we already told TCP
we've read it during previous read but now we'll trim it out of
the skb).

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.

This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

alloc_skb_with_frags() fills in page frag sizes but does not
set skb->len and skb->data_len. Set those correctly otherwise
device offload will most likely generate an empty skb and
hit the BUG() at the end of __skb_nsg().

Fixes: 84c61fe1 ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb->len covers the entire skb, including the frag_list.
In fact we're guaranteed that rxm->full_len <= skb->len,
so since the change under Fixes we were not checking decrypt
status of any skb but the first.

Note that the skb_pagelen() added here may feel a bit costly,
but it's removed by subsequent fixes, anyway.
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes: 86b259f6 ("tls: rx: device: bound the frag walk")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.

For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
	size = SKB_DATA_ALIGN(size);
        size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")

Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).

However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).

Consequently the SKB bounds checking semantics fails and panics:

skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
 <TASK>
 skb_put+0x151/0x210 net/core/skbuff.c:2047
 skb_put_zero include/linux/skbuff.h:2422 [inline]
 cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
 cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
 cdc_ncm_tx_fixup+0xa3/0x100

Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.

Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Cc: stable@vger.kernel.org
Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d
Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, xfrm, bluetooth and netfilter.

  Current release - regressions:

   - ipv6: fix RCU splat in ipv6_route_seq_show()

   - wifi: iwlwifi: disable RFI feature

  Previous releases - regressions:

   - tcp: fix possible sk_priority leak in tcp_v4_send_reset()

   - tipc: do not update mtu if msg_max is too small in mtu negotiation

   - netfilter: fix null deref on element insertion

   - devlink: change per-devlink netdev notifier to static one

   - phylink: fix ksettings_set() ethtool call

   - wifi: mac80211: fortify the spinlock against deadlock by interrupt

   - wifi: brcmfmac: check for probe() id argument being NULL

   - eth: ice:
      - fix undersized tx_flags variable
      - fix ice VF reset during iavf initialization

   - eth: hns3: fix sending pfc frames after reset issue

  Previous releases - always broken:

   - xfrm: release all offloaded policy memory

   - nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()

   - vsock: avoid to close connected socket after the timeout

   - dsa: rzn1-a5psw: enable management frames for CPU port

   - eth: virtio_net: fix error unwinding of XDP initialization

   - eth: tun: fix memory leak for detached NAPI queue.

  Misc:

   - MAINTAINERS: sctp: move Neil to CREDITS"

* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  MAINTAINERS: skip CCing netdev for Bluetooth patches
  mdio_bus: unhide mdio_bus_init prototype
  bridge: always declare tunnel functions
  atm: hide unused procfs functions
  net: isa: include net/Space.h
  Revert "ARM: dts: stm32: add CAN support on stm32f746"
  netfilter: nft_set_rbtree: fix null deref on element insertion
  netfilter: nf_tables: fix nft_trans type confusion
  netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
  net: wwan: t7xx: Ensure init is completed before system sleep
  net: selftests: Fix optstring
  net: pcs: xpcs: fix C73 AN not getting enabled
  net: wwan: iosm: fix NULL pointer dereference when removing device
  vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
  mailmap: add entries for Nikolay Aleksandrov
  igb: fix bit_shift to be in [1..8] range
  net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
  cassini: Fix a memory leak in the error handling path of cas_init_one()
  tun: Fix memory leak for detached NAPI queue.
  can: kvaser_pciefd: Disable interrupts in probe error path
  ...

Pull media fixes from Mauro Carvalho Chehab:
 "Several fixes for the dvb core and drivers:

   - fix UAF and null pointer de-reference in DVB core

   - fix kernel runtime warning for blocking operation in wait_event*()
     in dvb core

   - fix write size bug in DVB conditional access core

   - fix dvb demux continuity counter debug check logic

   - randconfig build fixes in pvrusb2 and mn88443x

   - fix memory leak in ttusb-dec

   - fix netup_unidvb probe-time error check logic

   - improve error handling in dw2102 if it can't retrieve DVB MAC
     address"

* tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221
  media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
  media: dvb-core: Fix use-after-free due to race at dvb_register_device()
  media: dvb-core: Fix use-after-free due on race condition at dvb_net
  media: dvb-core: Fix use-after-free on race condition at dvb_frontend
  media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table
  media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
  media: dvb_ca_en50221: fix a size write bug
  media: netup_unidvb: fix irq init by register it at the end of probe
  media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address
  media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()
  media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer
  media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()
  media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()
  media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()
  media: netup_unidvb: fix use-after-free at del_timer()
  media: dvb_demux: fix a bug for the continuity counter
  media: pvrusb2: fix DVB_CORE dependency

Merge tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2023-05-18

this is a pull request of 7 patches for net/master.

The first 6 patches are by Jimmy Assarsson and fix several bugs in the
kvaser_pciefd driver.

The latest patch is from me and reverts a change in stm32f746.dtsi
that causes build errors due to a missing dependent patch.

* tag 'linux-can-fixes-for-6.4-20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
  Revert "ARM: dts: stm32: add CAN support on stm32f746"
  can: kvaser_pciefd: Disable interrupts in probe error path
  can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
  can: kvaser_pciefd: Empty SRB buffer in probe
  can: kvaser_pciefd: Call request_irq() before enabling interrupts
  can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
  can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
====================

Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
Netfilter fixes for net

1. Silence warning about unused variable when CONFIG_NF_NAT=n, from Tom Rix.
2. nftables: Fix possible out-of-bounds access, from myself.
3. nftables: fix null deref+UAF during element insertion into rbtree,
   also from myself.

* tag 'nf-23-05-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_set_rbtree: fix null deref on element insertion
  netfilter: nf_tables: fix nft_trans type confusion
  netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
====================

Link: https://lore.kernel.org/r/20230517123756.7353-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.4

A lot of fixes this time, for both the stack and the drivers. The
brcmfmac resume fix has been reported by several people so I would say
it's the most important here. The iwlwifi RFI workaround is also
something which was reported as a regression recently.

* tag 'wireless-2023-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
  wifi: b43: fix incorrect __packed annotation
  wifi: rtw88: sdio: Always use two consecutive bytes for word operations
  mac80211_hwsim: fix memory leak in hwsim_new_radio_nl
  wifi: iwlwifi: mvm: Add locking to the rate read flow
  wifi: iwlwifi: Don't use valid_links to iterate sta links
  wifi: iwlwifi: mvm: don't trust firmware n_channels
  wifi: iwlwifi: mvm: fix OEM's name in the tas approved list
  wifi: iwlwifi: fix OEM's name in the ppag approved list
  wifi: iwlwifi: mvm: fix initialization of a return value
  wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id
  wifi: iwlwifi: fw: fix DBGI dump
  wifi: iwlwifi: mvm: fix number of concurrent link checks
  wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock
  wifi: iwlwifi: mvm: don't double-init spinlock
  wifi: iwlwifi: mvm: always free dup_data
  wifi: mac80211: recalc chanctx mindef before assigning
  wifi: mac80211: consider reserved chanctx for mindef
  wifi: mac80211: simplify chanctx allocation
  wifi: mac80211: Abort running color change when stopping the AP
  wifi: mac80211: fix min center freq offset tracing
  ...
====================

Link: https://lore.kernel.org/r/20230517151914.B0AF6C433EF@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As requested by Marcel skip netdev for Bluetooth patches.
Bluetooth has its own mailing list and overloading netdev
leads to fewer people reading it.

Link: https://lore.kernel.org/netdev/639C8EA4-1F6E-42BE-8F04-E4A753A6EFFC@holtmann.org/Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517014253.1233333-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:

drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]

Remove the #ifdef around the declaration to avoid the warning..
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still
defined but have no prototype or caller. This causes a W=1 warning for
the missing prototypes:

net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes]
net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes]

The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING,
and I coulnd't easily figure out the right set of #ifdefs, so just
move the declarations out of the #ifdef to avoid the warning,
at a small cost in code size over a more elaborate fix.

Fixes: 188c67dd ("net: bridge: vlan options: add support for tunnel id dumping")
Fixes: 569da082 ("net: bridge: vlan options: add support for tunnel mapping set/del")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:

net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]

Add another #ifdef to leave these out of the build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>