- 09 Jun, 2019 22 commits
-
-
Filipe Manana authored
commit 06989c79 upstream. When syncing the log, the final phase of a fsync operation, we need to either create a log root's item or update the existing item in the log tree of log roots, and that depends on the current value of the log root's log_transid - if it's 1 we need to create the log root item, otherwise it must exist already and we update it. Since there is no synchronization between updating the log_transid and checking it for deciding whether the log root's item needs to be created or updated, we end up with a tiny race window that results in attempts to update the item to fail because the item was not yet created: CPU 1 CPU 2 btrfs_sync_log() lock root->log_mutex set log root's log_transid to 1 unlock root->log_mutex btrfs_sync_log() lock root->log_mutex sets log root's log_transid to 2 unlock root->log_mutex update_log_root() sees log root's log_transid with a value of 2 calls btrfs_update_root(), which fails with -EUCLEAN and causes transaction abort Until recently the race lead to a BUG_ON at btrfs_update_root(), but after the recent commit 7ac1e464 ("btrfs: Don't panic when we can't find a root key") we just abort the current transaction. A sample trace of the BUG_ON() on a SLE12 kernel: ------------[ cut here ]------------ kernel BUG at ../fs/btrfs/root-tree.c:157! Oops: Exception in kernel mode, sig: 5 [#1] SMP NR_CPUS=2048 NUMA pSeries (...) Supported: Yes, External CPU: 78 PID: 76303 Comm: rtas_errd Tainted: G X 4.4.156-94.57-default #1 task: c00000ffa906d010 ti: c00000ff42b08000 task.ti: c00000ff42b08000 NIP: d000000036ae5cdc LR: d000000036ae5cd8 CTR: 0000000000000000 REGS: c00000ff42b0b860 TRAP: 0700 Tainted: G X (4.4.156-94.57-default) MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 22444484 XER: 20000000 CFAR: d000000036aba66c SOFTE: 1 GPR00: d000000036ae5cd8 c00000ff42b0bae0 d000000036bda220 0000000000000054 GPR04: 0000000000000001 0000000000000000 c00007ffff8d37c8 0000000000000000 GPR08: c000000000e19c00 0000000000000000 0000000000000000 3736343438312079 GPR12: 3930373337303434 c000000007a3a800 00000000007fffff 0000000000000023 GPR16: c00000ffa9d26028 c00000ffa9d261f8 0000000000000010 c00000ffa9d2ab28 GPR20: c00000ff42b0bc48 0000000000000001 c00000ff9f0d9888 0000000000000001 GPR24: c00000ffa9d26000 c00000ffa9d261e8 c00000ffa9d2a800 c00000ff9f0d9888 GPR28: c00000ffa9d26028 c00000ffa9d2aa98 0000000000000001 c00000ffa98f5b20 NIP [d000000036ae5cdc] btrfs_update_root+0x25c/0x4e0 [btrfs] LR [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] Call Trace: [c00000ff42b0bae0] [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] (unreliable) [c00000ff42b0bba0] [d000000036b53610] btrfs_sync_log+0x2d0/0xc60 [btrfs] [c00000ff42b0bce0] [d000000036b1785c] btrfs_sync_file+0x44c/0x4e0 [btrfs] [c00000ff42b0bd80] [c00000000032e300] vfs_fsync_range+0x70/0x120 [c00000ff42b0bdd0] [c00000000032e44c] do_fsync+0x5c/0xb0 [c00000ff42b0be10] [c00000000032e8dc] SyS_fdatasync+0x2c/0x40 [c00000ff42b0be30] [c000000000009488] system_call+0x3c/0x100 Instruction dump: 7f43d378 4bffebb9 60000000 88d90008 3d220000 e8b90000 3b390009 e87a01f0 e8898e08 e8f90000 4bfd48e5 60000000 <0fe00000> e95b0060 39200004 394a0ea0 ---[ end trace 8f2dc8f919cabab8 ]--- So fix this by doing the check of log_transid and updating or creating the log root's item while holding the root's log_mutex. Fixes: 7237f183 ("Btrfs: fix tree logs parallel sync") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Filipe Manana authored
commit 5338e43a upstream. When replaying a log that contains a new file or directory name that needs to be added to its parent directory, we end up updating the mtime and the ctime of the parent directory to the current time after we have set their values to the correct ones (set at fsync time), efectivelly losing them. Sample reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ mkdir /mnt/dir $ touch /mnt/dir/file # fsync of the directory is optional, not needed $ xfs_io -c fsync /mnt/dir $ xfs_io -c fsync /mnt/dir/file $ stat -c %Y /mnt/dir 1557856079 <power failure> $ sleep 3 $ mount /dev/sdb /mnt $ stat -c %Y /mnt/dir 1557856082 --> should have been 1557856079, the mtime is updated to the current time when replaying the log Fix this by not updating the mtime and ctime to the current time at btrfs_add_link() when we are replaying a log tree. This could be triggered by my recent fsync fuzz tester for fstests, for which an fstests patch exists titled "fstests: generic, fsync fuzz tester with fsstress". Fixes: e02119d5 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Tomas Bortoli authored
commit dfb4a6f2 upstream. In case of errors, predicate_parse() goes to the out_free label to free memory and to return an error code. However, predicate_parse() does not free the predicates of the temporary prog_stack array, thence leaking them. Link: http://lkml.kernel.org/r/20190528154338.29976-1-tomasbortoli@gmail.com Cc: stable@vger.kernel.org Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster") Reported-by: syzbot+6b8e0fb820e570c59e19@syzkaller.appspotmail.com Signed-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> [ Added protection around freeing prog_stack[i].pred ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steffen Maier authored
commit ef4021fe upstream. When the user tries to remove a zfcp port via sysfs, we only rejected it if there are zfcp unit children under the port. With purely automatically scanned LUNs there are no zfcp units but only SCSI devices. In such cases, the port_remove erroneously continued. We close the port and this implicitly closes all LUNs under the port. The SCSI devices survive with their private zfcp_scsi_dev still holding a reference to the "removed" zfcp_port (still allocated but invisible in sysfs) [zfcp_get_port_by_wwpn in zfcp_scsi_slave_alloc]. This is not a problem as long as the fc_rport stays blocked. Once (auto) port scan brings back the removed port, we unblock its fc_rport again by design. However, there is no mechanism that would recover (open) the LUNs under the port (no "ersfs_3" without zfcp_unit [zfcp_erp_strategy_followup_success]). Any pending or new I/O to such LUN leads to repeated: Done: NEEDS_RETRY Result: hostbyte=DID_IMM_RETRY driverbyte=DRIVER_OK See also v4.10 commit 6f2ce1c6 ("scsi: zfcp: fix rport unblock race with LUN recovery"). Even a manual LUN recovery (echo 0 > /sys/bus/scsi/devices/H:C:T:L/zfcp_failed) does not help, as the LUN links to the old "removed" port which remains to lack ZFCP_STATUS_COMMON_RUNNING [zfcp_erp_required_act]. The only workaround is to first ensure that the fc_rport is blocked (e.g. port_remove again in case it was re-discovered by (auto) port scan), then delete the SCSI devices, and finally re-discover by (auto) port scan. The port scan includes an fc_rport unblock, which in turn triggers a new scan on the scsi target to freshly get new pure auto scan LUNs. Fix this by rejecting port_remove also if there are SCSI devices (even without any zfcp_unit) under this port. Re-use mechanics from v3.7 commit d99b601b ("[SCSI] zfcp: restore refcount check on port_remove"). However, we have to give up zfcp_sysfs_port_units_mutex earlier in unit_add to prevent a deadlock with scsi_host scan taking shost->scan_mutex first and then zfcp_sysfs_port_units_mutex now in our zfcp_scsi_slave_alloc(). Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Fixes: b62a8d9b ("[SCSI] zfcp: Use SCSI device data zfcp scsi dev instead of zfcp unit") Fixes: f8210e34 ("[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode") Cc: <stable@vger.kernel.org> #2.6.37+ Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Steffen Maier authored
commit d27e5e07 upstream. With this early return due to zfcp_unit child(ren), we don't use the zfcp_port reference from the earlier zfcp_get_port_by_wwpn() anymore and need to put it. Signed-off-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
-
Piotr Figiel authored
commit 5cdb0ef6 upstream. In case USB disconnect happens at the moment transmitting workqueue is in progress the underlying interface may be gone causing a NULL pointer dereference. Add synchronization of the workqueue destruction with the detach implementation in core so that the transmitting workqueue is stopped during detach before the interfaces are removed. Fix following Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = 9e6a802d [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether usb_serial_simple usbserial cdc_acm brcmfmac brcmutil smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core CPU: 0 PID: 7 Comm: kworker/u8:0 Not tainted 4.19.23-00076-g03740aa-dirty #102 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: brcmf_fws_wq brcmf_fws_dequeue_worker [brcmfmac] PC is at brcmf_txfinalize+0x34/0x90 [brcmfmac] LR is at brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac] pc : [<7f0dee64>] lr : [<7f0e4140>] psr: 60010093 sp : ee8abef0 ip : 00000000 fp : edf38000 r10: ffffffed r9 : edf38970 r8 : edf38004 r7 : edf3e970 r6 : 00000000 r5 : ede69000 r4 : 00000000 r3 : 00000a97 r2 : 00000000 r1 : 0000888e r0 : ede69000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7d03c04a DAC: 00000051 Process kworker/u8:0 (pid: 7, stack limit = 0x24ec3e04) Stack: (0xee8abef0 to 0xee8ac000) bee0: ede69000 00000000 ed56c3e0 7f0e4140 bf00: 00000001 00000000 edf38004 edf3e99c ed56c3e0 80d03d00 edfea43a edf3e970 bf20: ee809880 ee804200 ee971100 00000000 edf3e974 00000000 ee804200 80135a70 bf40: 80d03d00 ee804218 ee809880 ee809894 ee804200 80d03d00 ee804218 ee8aa000 bf60: 00000088 80135d5c 00000000 ee829f00 ee829dc0 00000000 ee809880 80135d30 bf80: ee829f1c ee873eac 00000000 8013b1a0 ee829dc0 8013b07c 00000000 00000000 bfa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<7f0dee64>] (brcmf_txfinalize [brcmfmac]) from [<7f0e4140>] (brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac]) [<7f0e4140>] (brcmf_fws_dequeue_worker [brcmfmac]) from [<80135a70>] (process_one_work+0x138/0x3f8) [<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554) [<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154) [<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xee8abfb0 to 0xee8abff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e1530001 0a000007 e3560000 e1a00005 (05942008) ---[ end trace 079239dd31c86e90 ]--- Signed-off-by:
Piotr Figiel <p.figiel@camlintechnologies.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit a4768663 upstream. Most Siano devices require an alignment for the response. Changeset f3be52b0056a ("media: usb: siano: Fix general protection fault in smsusb") changed the logic with gets such aligment, but it now produces a sparce warning: drivers/media/usb/siano/smsusb.c: In function 'smsusb_init_device': drivers/media/usb/siano/smsusb.c:447:37: warning: 'in_maxp' may be used uninitialized in this function [-Wmaybe-uninitialized] 447 | dev->response_alignment = in_maxp - sizeof(struct sms_msg_hdr); | ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ The sparse message itself is bogus, but a broken (or fake) USB eeprom could produce a negative value for response_alignment. So, change the code in order to check if the result is not negative. Fixes: 31e0456d ("media: usb: siano: Fix general protection fault in smsusb") CC: <stable@vger.kernel.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Alan Stern authored
commit 45457c01 upstream. GCC complains about an apparently uninitialized variable recently added to smsusb_init_device(). It's a false positive, but to silence the warning this patch adds a trivial initialization. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
kbuild test robot <lkp@intel.com> CC: <stable@vger.kernel.org> Signed-off-by:
-
Alan Stern authored
commit 31e0456d upstream. The syzkaller USB fuzzer found a general-protection-fault bug in the smsusb part of the Siano DVB driver. The fault occurs during probe because the driver assumes without checking that the device has both IN and OUT endpoints and the IN endpoint is ep1. By slightly rearranging the driver's initialization code, we can make the appropriate checks early on and thus avoid the problem. If the expected endpoints aren't present, the new code safely returns -ENODEV from the probe routine. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit e0feb734 upstream. If a disconnected device is closed, rio_close() must free the buffers. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 3864d339 upstream. This driver is using a global variable. It cannot handle more than one device at a time. The issue has been existing since the dawn of the driver. Signed-off-by:
-
Maximilian Luz authored
commit ea261113 upstream. Without USB_QUIRK_NO_LPM ethernet will not work and rtl8152 will complain with r8152 <device...>: Stop submitting intr, status -71 Adding the quirk resolves this. As the dock is externally powered, this should not have any drawbacks. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Oliver Neukum authored
commit 9a5729f6 upstream. The pointer used to log a failure of usb_register_dev() must be set before the error is logged. v2: fix that minor is not available before registration Signed-off-by:
-
Alan Stern authored
commit a03ff544 upstream. The syzkaller USB fuzzer found a slab-out-of-bounds write bug in the USB core, caused by a failure to check the actual size of a BOS descriptor. This patch adds a check to make sure the descriptor is at least as large as it is supposed to be, so that the code doesn't inadvertently access memory beyond the end of the allocated region when assigning to dev->bos->desc->bNumDeviceCaps later on. Signed-off-by:
-
Shuah Khan authored
commit 3ea3091f upstream. Fix the following sparse context imbalance regression introduced in a patch that fixed sleeping function called from invalid context bug. kbuild test robot reported on: tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-linus Regressions in current branch: drivers/usb/usbip/stub_dev.c:399:9: sparse: sparse: context imbalance in 'stub_probe' - different lock contexts for basic block drivers/usb/usbip/stub_dev.c:418:13: sparse: sparse: context imbalance in 'stub_disconnect' - different lock contexts for basic block drivers/usb/usbip/stub_dev.c:464:1-10: second lock on line 476 Error ids grouped by kconfigs: recent_errors ├── i386-allmodconfig │ └── drivers-usb-usbip-stub_dev.c:second-lock-on-line ├── x86_64-allmodconfig │ ├── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_disconnect-different-lock-contexts-for-basic-block │ └── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_probe-different-lock-contexts-for-basic-block └── x86_64-allyesconfig └── drivers-usb-usbip-stub_dev.c:second-lock-on-line This is a real problem in an error leg where spin_lock() is called on an already held lock. Fix the imbalance in stub_probe() and stub_disconnect(). Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Fixes: 0c9e8b3c ("usbip: usbip_host: fix BUG: sleeping function called from invalid context") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan authored
commit 0c9e8b3c upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by:
-
Carsten Schmid authored
commit 7aa1bb2f upstream. With defective USB sticks we see the following error happen: usb 1-3: new high-speed USB device number 6 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: device descriptor read/64, error -71 usb 1-3: new high-speed USB device number 7 using xhci_hcd usb 1-3: device descriptor read/64, error -71 usb 1-3: unable to get BOS descriptor set usb 1-3: New USB device found, idVendor=0781, idProduct=5581 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 This comes from the following place: [ 1660.215380] IP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.222092] PGD 0 P4D 0 [ 1660.224918] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 1660.425520] CPU: 1 PID: 38 Comm: kworker/1:1 Tainted: P U W O 4.14.67-apl #1 [ 1660.434277] Workqueue: usb_hub_wq hub_event [usbcore] [ 1660.439918] task: ffffa295b6ae4c80 task.stack: ffffad4580150000 [ 1660.446532] RIP: 0010:xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] [ 1660.453821] RSP: 0018:ffffad4580153c70 EFLAGS: 00010046 [ 1660.459655] RAX: 0000000000000000 RBX: ffffa295b4d7c000 RCX: 0000000000000002 [ 1660.467625] RDX: 0000000000000002 RSI: ffffffff984a55b2 RDI: ffffffff984a55b2 [ 1660.475586] RBP: ffffad4580153cc8 R08: 0000000000d6520a R09: 0000000000000001 [ 1660.483556] R10: ffffad4580a004a0 R11: 0000000000000286 R12: ffffa295b4d7c000 [ 1660.491525] R13: 0000000000010648 R14: ffffa295a84e1800 R15: 0000000000000000 [ 1660.499494] FS: 0000000000000000(0000) GS:ffffa295bfc80000(0000) knlGS:0000000000000000 [ 1660.508530] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1660.514947] CR2: 0000000000000008 CR3: 000000025a114000 CR4: 00000000003406a0 [ 1660.522917] Call Trace: [ 1660.525657] usb_set_usb2_hardware_lpm+0x3d/0x70 [usbcore] [ 1660.531792] usb_disable_device+0x242/0x260 [usbcore] [ 1660.537439] usb_disconnect+0xc1/0x2b0 [usbcore] [ 1660.542600] hub_event+0x596/0x18f0 [usbcore] [ 1660.547467] ? trace_preempt_on+0xdf/0x100 [ 1660.552040] ? process_one_work+0x1c1/0x410 [ 1660.556708] process_one_work+0x1d2/0x410 [ 1660.561184] ? preempt_count_add.part.3+0x21/0x60 [ 1660.566436] worker_thread+0x2d/0x3f0 [ 1660.570522] kthread+0x122/0x140 [ 1660.574123] ? process_one_work+0x410/0x410 [ 1660.578792] ? kthread_create_on_node+0x60/0x60 [ 1660.583849] ret_from_fork+0x3a/0x50 [ 1660.587839] Code: 00 49 89 c3 49 8b 84 24 50 16 00 00 8d 4a ff 48 8d 04 c8 48 89 ca 4c 8b 10 45 8b 6a 04 48 8b 00 48 89 45 c0 49 8b 86 80 03 00 00 <48> 8b 40 08 8b 40 03 0f 1f 44 00 00 45 85 ff 0f 84 81 01 00 00 [ 1660.608980] RIP: xhci_set_usb2_hardware_lpm+0xdf/0x3d0 [xhci_hcd] RSP: ffffad4580153c70 [ 1660.617921] CR2: 0000000000000008 Tracking this down shows that udev->bos is NULL in the following code: (xhci.c, in xhci_set_usb2_hardware_lpm) field = le32_to_cpu(udev->bos->ext_cap->bmAttributes); <<<<<<< here xhci_dbg(xhci, "%s port %d USB2 hardware LPM\n", enable ? "enable" : "disable", port_num + 1); if (enable) { /* Host supports BESL timeout instead of HIRD */ if (udev->usb2_hw_lpm_besl_capable) { /* if device doesn't have a preferred BESL value use a * default one which works with mixed HIRD and BESL * systems. See XHCI_DEFAULT_BESL definition in xhci.h */ if ((field & USB_BESL_SUPPORT) && (field & USB_BESL_BASELINE_VALID)) hird = USB_GET_BESL_BASELINE(field); else hird = udev->l1_params.besl; The failing case is when disabling LPM. So it is sufficient to avoid access to udev->bos by moving the instruction into the "enable" clause. Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Carsten Schmid <carsten_schmid@mentor.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Andrey Smirnov authored
commit f7fac17c upstream. Xhci_handshake() implements the algorithm already captured by readl_poll_timeout_atomic(). Convert the former to use the latter to avoid repetition. Turned out this patch also fixes a bug on the AMD Stoneyridge platform where usleep(1) sometimes takes over 10ms. This means a 5 second timeout can easily take over 15 seconds which will trigger the watchdog and reboot the system. [Add info about patch fixing a bug to commit message -Mathias] Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by:
Raul E Rangel <rrangel@chromium.org> Reviewed-by:
-
Fabio Estevam authored
commit c1a145a3 upstream. Commit 597c56e3 ("xhci: update bounce buffer with correct sg num") caused the following build warnings: drivers/usb/host/xhci-ring.c:676:19: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t {aka unsigned int}' [-Wformat=] Use %zu for printing size_t type in order to fix the warnings. Fixes: 597c56e3 ("xhci: update bounce buffer with correct sg num") Reported-by:
Fabio Estevam <festevam@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
-
Henry Lin authored
commit 597c56e3 upstream. This change fixes a data corruption issue occurred on USB hard disk for the case that bounce buffer is used during transferring data. While updating data between sg list and bounce buffer, current implementation passes mapped sg number (urb->num_mapped_sgs) to sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data not get copied if target buffer is located in the elements after mapped sg elements. This change passes sg number for full list to fix issue. Besides, for copying data from bounce buffer, calling dma_unmap_single() on the bounce buffer before copying data to sg list can avoid cache issue. Fixes: f9c589e1 ("xhci: TD-fragment, align the unsplittable case with a bounce buffer") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
Henry Lin <henryl@nvidia.com> Signed-off-by:
-
Rasmus Villemoes authored
commit ef4d6f6b upstream. The ror32 implementation (word >> shift) | (word << (32 - shift) has undefined behaviour if shift is outside the [1, 31] range. Similarly for the 64 bit variants. Most callers pass a compile-time constant (naturally in that range), but there's an UBSAN report that these may actually be called with a shift count of 0. Instead of special-casing that, we can make them DTRT for all values of shift while also avoiding UB. For some reason, this was already partly done for rol32 (which was well-defined for [0, 31]). gcc 8 recognizes these patterns as rotates, so for example __u32 rol32(__u32 word, unsigned int shift) { return (word << (shift & 31)) | (word >> ((-shift) & 31)); } compiles to 0000000000000020 <rol32>: 20: 89 f8 mov %edi,%eax 22: 89 f1 mov %esi,%ecx 24: d3 c0 rol %cl,%eax 26: c3 retq Older compilers unfortunately do not do as well, but this only affects the small minority of users that don't pass constants. Due to integer promotions, ro[lr]8 were already well-defined for shifts in [0, 8], and ro[lr]16 were mostly well-defined for shifts in [0, 16] (only mostly - u16 gets promoted to _signed_ int, so if bit 15 is set, word << 16 is undefined). For consistency, update those as well. Link: http://lkml.kernel.org/r/20190410211906.2190-1-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reported-by:
Ido Schimmel <idosch@mellanox.com> Tested-by:
Will Deacon <will.deacon@arm.com> Cc: Vadim Pasternak <vadimp@mellanox.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
James Clarke authored
commit d3c976c1 upstream. Previously, %g2 would end up with the value PAGE_SIZE, but after the commit mentioned below it ends up with the value 1 due to being reused for a different purpose. We need it to be PAGE_SIZE as we use it to step through pages in our demap loop, otherwise we set different flags in the low 12 bits of the address written to, thereby doing things other than a nucleus page flush. Fixes: a74ad5e6 ("sparc64: Handle extremely large kernel TLB range flushes more gracefully.") Reported-by:
Meelis Roos <mroos@linux.ee> Tested-by:
James Clarke <jrtc27@jrtc27.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 04 Jun, 2019 18 commits
-
-
Greg Kroah-Hartman authored
-
Junwei Hu authored
commit 526f5b85 upstream. Error message printed: modprobe: ERROR: could not insert 'tipc': Address family not supported by protocol. when modprobe tipc after the following patch: switch order of device registration, commit 7e27e8d6 ("tipc: switch order of device registration to fix a crash") Because sock_create_kern(net, AF_TIPC, ...) called by tipc_topsrv_create_listener() in the initialization process of tipc_init_net(), so tipc_socket_init() must be execute before that. Meanwhile, tipc_net_id need to be initialized when sock_create() called, and tipc_socket_init() is no need to be called for each namespace. I add a variable tipc_topsrv_net_ops, and split the register_pernet_subsys() of tipc into two parts, and split tipc_socket_init() with initialization of pernet params. By the way, I fixed resources rollback error when tipc_bcast_init() failed in tipc_init_net(). Fixes: 7e27e8d6 ("tipc: switch order of device registration to fix a crash") Signed-off-by:
Junwei Hu <hujunwei4@huawei.com> Reported-by:
Wang Wang <wangwang2@huawei.com> Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com Reviewed-by:
Kang Zhou <zhoukang7@huawei.com> Reviewed-by:
Suanming Mou <mousuanming@huawei.com> Signed-off-by:
-
David S. Miller authored
commit 5593530e upstream. This reverts commit 532b0f7e. More revisions coming up. Signed-off-by:
-
Daniel Axtens authored
commit 357d065a upstream. VMX ghash was using a fallback that did not support interleaving simd and nosimd operations, leading to failures in the extended test suite. If I understood correctly, Eric's suggestion was to use the same data format that the generic code uses, allowing us to call into it with the same contexts. I wasn't able to get that to work - I think there's a very different key structure and data layout being used. So instead steal the arm64 approach and perform the fallback operations directly if required. Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Reported-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Daniel Axtens <dja@axtens.net> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 100f6d8e ] TCP zerocopy takes a uarg reference for every skb, plus one for the tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero as it builds, sends and frees skbs inside its inner loop. UDP and RAW zerocopy do not send inside the inner loop so do not need the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit 52900d22288ed ("udp: elide zerocopy operation in hot path") introduced extra_uref to pass the initial reference taken in sock_zerocopy_alloc to the first generated skb. But, sock_zerocopy_realloc takes this extra reference at the start of every call. With MSG_MORE, no new skb may be generated to attach the extra_uref to, so refcnt is incorrectly 2 with only one skb. Do not take the extra ref if uarg && !tcp, which implies MSG_MORE. Update extra_uref accordingly. This conditional assignment triggers a false positive may be used uninitialized warning, so have to initialize extra_uref at define. Changes v1->v2: fix typo in Fixes SHA1 Fixes: 52900d22 ("udp: elide zerocopy operation in hot path") Reported-by:
syzbot <syzkaller@googlegroups.com> Diagnosed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Vishal Kulkarni authored
[ Upstream commit ab0610ef ] This reverts commit 2391b003 which has introduced regression. Now SGE's BAR2 Doorbell/GTS Page Size is interpreted correctly in the firmware itself by using actual host page size. Hence previous commit needs to be reverted. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit c3f4a6c3 ] On device surprise removal path (the notifier) we can't bail just because the features are disabled. They may have been enabled during the lifetime of the device. This bug leads to leaking netdev references and use-after-frees if there are active connections while device features are cleared. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 3686637e ] TLS offload drivers shouldn't (and currently don't) block the TLS offload feature changes based on whether there are active offloaded connections or not. This seems to be a good idea, because we want the admin to be able to disable the TLS offload at any time, and there is no clean way of disabling it for active connections (TX side is quite problematic). So if features are cleared existing connections will stay offloaded until they close, and new connections will not attempt offload to a given device. However, the offload state removal handling is currently broken if feature flags get cleared while there are active TLS offloads. RX side will completely bail from cleanup, even on normal remove path, leaving device state dangling, potentially causing issues when the 5-tuple is reused. It will also fail to release the netdev reference. Remove the RX-side warning message, in next release cycle it should be printed when features are disabled, rather than when connection dies, but for that we need a more efficient method of finding connection of a given netdev (a'la BPF offload code). Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 043556d0 ] Add a test which sends 15 bytes of data, and then tries to read 10 byes twice. Previously the second read would sleep indifinitely, since the record was already decrypted and there is only 5 bytes left, not full 10. Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 04b25a54 ] When tls_sw_recvmsg() partially copies a record it pops that record from ctx->recv_pkt and places it on rx_list. Next iteration of tls_sw_recvmsg() reads from rx_list via process_rx_list() before it enters the decryption loop. If there is no more records to be read tls_wait_data() will put the process on the wait queue and got to sleep. This is incorrect, because some data was already copied in process_rx_list(). In case of RPC connections process may never get woken up, because peer also simply blocks in read(). I think this may also fix a similar issue when BPF is at play, because after __tcp_bpf_recvmsg() returns some data we subtract it from len and use continue to restart the loop, but len could have just reached 0, so again we'd sleep unnecessarily. That's added by: commit d3b18ad3 ("tls: add bpf support to sk_msg handling") Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Reported-by:
David Beckett <david.beckett@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 7718a855 ] Set SO_RCVLOWAT and test it gets respected when gathering data from multiple records. Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 46a16959 ] If some of the data came from the previous record, i.e. from the rx_list it had already been decrypted, so it's not counted towards the "decrypted" variable, but the "copied" variable. Take that into account when checking lowat. When calculating lowat target we need to pass the original len. E.g. if lowat is at 80, len is 100 and we had 30 bytes on rx_list target would currently be incorrectly calculated as 70, even though we only need 50 more bytes to make up the 80. Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by:
-
Michael Chan authored
[ Upstream commit d629522e ] Skip RDMA context memory allocations, reduce to 1 ring, and disable TPA when running in the kdump kernel. Without this patch, the driver fails to initialize with memory allocation errors when running in a typical kdump kernel. Fixes: cf6daed0 ("bnxt_en: Increase context memory allocations on 57500 chips for RDMA.") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
[ Upstream commit 1b3f0b75 ] When making configuration changes, the driver calls bnxt_close_nic() and then bnxt_open_nic() for the changes to take effect. A parameter irq_re_init is passed to the call sequence to indicate if IRQ should be re-initialized. This irq_re_init parameter needs to be included in the bnxt_reserve_rings() call. bnxt_reserve_rings() can only call pci_disable_msix() if the irq_re_init parameter is true, otherwise it may hit BUG() because some IRQs may not have been freed yet. Fixes: 41e8d798 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.") Signed-off-by:
-
Michael Chan authored
[ Upstream commit 296d5b54 ] For every RX packet, the driver replenishes all buffers used for that packet and puts them back into the RX ring and RX aggregation ring. In one code path where the RX packet has one RX buffer and one or more aggregation buffers, we missed recycling the aggregation buffer(s) if we are unable to allocate a new SKB buffer. This leads to the aggregation ring slowly running out of buffers over time. Fix it by properly recycling the aggregation buffers. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Rakesh Hemnani <rhemnani@fb.com> Signed-off-by:
-
Weifeng Voon authored
stmmac_init_chan() needs to be called before stmmac_init_rx_chan() and stmmac_init_tx_chan(). This is because if PBLx8 is to be used, "DMA_CH(#i)_Control.PBLx8" needs to be set before programming "DMA_CH(#i)_TX_Control.TxPBL" and "DMA_CH(#i)_RX_Control.RxPBL". Fixes: 47f2a9ce ("net: stmmac: dma channel init prepared for multiple queues") Reviewed-by:
Zhang, Baoli <baoli.zhang@intel.com> Signed-off-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
Weifeng Voon <weifeng.voon@intel.com> Signed-off-by:
-
Tan, Tee Min authored
Currently ethtool was not able to get/set the flow control due to a missing "!". It will always return -EOPNOTSUPP even the device is flow control supported. This patch fixes the condition check for ethtool flow control get/set function for ETHTOOL_LINK_MODE_Asym_Pause_BIT. Fixes: 3c1bcc86 (“net: ethernet: Convert phydev advertize and supported from u32 to link mode”) Signed-off-by:
Tan, Tee Min <tee.min.tan@intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit c0194e2d ] When CQE compression is enabled (Multi-host systems), compressed CQEs might arrive to the driver rx, compressed CQEs don't have a valid hash offload and the driver already reports a hash value of 0 and invalid hash type on the skb for compressed CQEs, but this is not good enough. On a congested PCIe, where CQE compression will kick in aggressively, gro will deliver lots of out of order packets due to the invalid hash and this might cause a serious performance drop. The only valid solution, is to disable rxhash offload at all when CQE compression is favorable (Multi-host systems). Fixes: 7219ab34 ("net/mlx5e: CQE compression") Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
