- 18 Apr, 2013 13 commits
-
-
Ben Widawsky authored
The PPGTT scratch page is used for all gens, and doing it in the global part of our PPGTT setup makes the code a bit nicer. This was in a patch submitted earlier as part of the PPGTT cleanups. Grumpy maintainer must have missed it, and I didn't yell when appropriate. Apologies for everyone :-) v2: Update commit message Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ben Widawsky authored
There used to be other fixes in this patch but they've slowly disappeared as other parts have been fixed. Signed-off-by:
-
Ben Widawsky authored
This will allow us to read/write registers in GTT init. Signed-off-by:
-
Ben Widawsky authored
We can assume that the PTE layout, and size changes for future generations. To avoid confusion with the existing GEN6 PTE typedef, give it a GEN6_ prefix. v2: Fixup checkpatch warning and bikeshed commit message slightly. v3: Rebase on top of Imre's for_each_sg_pages rework. v4: Fixup conflicts in patch series reordering. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: -
Ben Widawsky authored
All gen6+ parts so far have 1 BAR which holds both the register space and the GTT PTEs. Up until now, that was a 4MB BAR with half allocated to each. I have a strong hunch (wink, nod, wink) that future gens will also keep a similar 50-50 split though the sizes may change. To help this along change the code to obey the rule of half the total size instead of a hard-coded 2MB. Signed-off-by:
-
Chris Wilson authored
Enabling context support increases SwapBuffers latency by about 20% (measured on an i7-3720qm). We can offset that loss slightly by enabling faster caching for the contexts. As they are not backed by any particular cache (such as the sampler or render caches) our only option is to select the generic mid-level cache. This reduces the latency of the swap by about 5%. Oddly this effect can be observed running smokin-guns on IVB at 1280x1024: Using BLT copies for swaps: 151.67 fps Using Render copies for swaps (unpatched): 141.70 fps With contexts disabled: 150.23 fps With contexts in L3$: 150.77 fps Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Daniel Vetter authored
Bspec has been been updated and dropped these two changes for non-sdv LPT PCHs. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Chris Wilson authored
In order to fully serialize access to the fenced region and the update to the fence register we need to take extreme measures on SNB+, and manually flush writes to memory prior to writing the fence register in conjunction with the memory barriers placed around the register write. Fixes i-g-t/gem_fence_thrash v2: Bring a bigger gun v3: Switch the bigger gun for heavier bullets (Arjan van de Ven) v4: Remove changes for working generations. v5: Reduce to a per-cpu wbinvd() call prior to updating the fences. v6: Rewrite comments to ellide forgotten history. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Daniel Vetter authored
Userspace can easily hit this and does since Ville added a new evil igt testcase in: commit 069e35e0fc3785faa562adcfd2dd7bbed4cb1dea Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Mon Mar 4 15:34:06 2013 +0200 kms_flip: Add flip-vs-bad-tiling test v2: Fix the spelling in the added comment (Chris). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63246Signed-off-by: -
Daniel Vetter authored
Since the ratio is different, we also need to pass in the parameters for the reduced clock. Might or might not reduce flicker for the auto-downclocking on lvds/eDP. Reviewed-by:
-
Daniel Vetter authored
Only on IBX should we set the limiting factor to 25 unconditionally for dual-channel mode, on CPT/PPT 25 only applies when the lvds refclock is 100MHz. Reviewed-by:
-
Daniel Vetter authored
commit de13a2e3 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Thu Sep 20 18:36:05 2012 -0300 drm/i915: extract compute_dpll from ironlake_crtc_mode_set missed the subtle adjustment of the FP1 register. Fix this up by passing a pointer around instead of the value. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
-
Egbert Eich authored
The connector associated with the encoder is considered active when the output associtated with this connector is active on the encoder. The encoder itself is considered active when either there is an active output on it or the respective SDVO channel is active. Having active outputs when the SDVO channel is inactive seems to be inconsistent: such states can be found when intel_modeset_setup_hw_state() collects the hardware state set by the BIOS. This inconsistency will be fixed in intel_sanitize_crtc() (when intel_crtc_update_dpms() is called), this however only happens when the encoder is associated with a crtc. This patch also reverts: commit bd6946e8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 2 21:30:34 2013 +0200 drm/i915: Fix sdvo connector get_hw_state function Signed-off-by:Egbert Eich <eich@suse.de> Suggested-by:
-
- 08 Apr, 2013 4 commits
-
-
Ben Widawsky authored
FIXME: This is based on some HW being used for a demo. We should probably wait until we have confirmation on the IDs before upstreaming this patch. v2: Use GEN7_FEATURES (Chris) Signed-off-by:
-
Ben Widawsky authored
Set up PCH_NOP when we match a certain platform. v2: Just do a num_pipes check + comment instead of trying to check the platform (Daniel) Signed-off-by:
-
Ben Widawsky authored
BIOS should be setting this, but in case it doesn't... v2: Define the bits we actually want to clear (Jesse) Make it an RMW op (Jesse) Signed-off-by:
-
Ben Widawsky authored
Interrupts, clock gating, LVDS, and GMBUS are all within the, "this will be bad for CPU" range when we have PCH_NOP. There is a bit of a hack in init clock gating. We want to do most of the clock gating, but the part we skip will hang the system. It could probably be abstracted a bit better, but I don't feel it's too unsightly. v2: Use inverse HAS_PCH_NOP check (Jani) v3: Actually do what I claimed in v2 (spotted by Daniel) Merge Ivybridge IRQ handler PCH check to decrease whitespace (Daniel) Move LVDS bail into this patch (Ben) v4: logical rebase conflict resolution with SDEIIR (Ben) Signed-off-by:
-
- 06 Apr, 2013 3 commits
-
-
Ben Widawsky authored
Given certain fusing options discussed in the previous patch, it's possible to end up with platforms that normally have PCH but that PCH doesn't actually exist. In many cases, this is easily remedied with setting 0 pipes. This covers the other corners. Requiring this is a symptom of improper code splitting (using HAS_PCH_SPLIT instead of proper GEN checking, basically). I do not want to fix this. v2: Remove PCH reflck after change in previous patch (Daniel) Signed-off-by:
-
Ben Widawsky authored
GEN supports a fusing option which subtracts the PCH display (making the CPU display also useless). In this configuration MMIO which gets decoded to a certain range will hang the CPU. For us, this is sort of the equivalent of having no pipes, and we can easily modify some code to not do certain things with no pipes. v2: Moved the num pipes check up in the call chain, and removed extra checks noted by Daniel. For more details, see: http://lists.freedesktop.org/archives/intel-gfx/2013-March/025746.html v3: Drop the intel_setup_overlay check (Daniel) Signed-off-by:
-
Daniel Vetter authored
Otherwise running igt will fill your dmesg with hang notices and it's hard to judge from a quick look whether they're expected or not. Signed-off-by:
-
- 05 Apr, 2013 6 commits
-
-
Daniel Vetter authored
The behaviour around handling the eDP bpp value from vbt has been slightly changed in commit 36008365 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 27 00:44:59 2013 +0100 drm/i915: convert DP autodither code to new infrastructure The old behaviour was that we used the plane's bpp (usually 24bpp) for computing the dp link bw, but set up the pipe with the bpp value from vbt if available. This takes the vbt bpp override into account even for the dp link bw configuration. On Paulo's hsw machine this resulted in a slower link clock and a black screen - but the mode actually /should/ fit even with the lower clock. Until we've cleared up simply stay bug-for-bug compatible with the old code. While at it, also restore a debug message lost in: commit 4e53c2e0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 27 00:44:58 2013 +0100 drm/i915: precompute pipe bpp before touching the hw Cc: Paulo Zanoni <przanoni@gmail.com> Reviewed-by:
-
Daniel Vetter authored
This reverts commit deb18211. It completely breaks the logic, since when we fall through to the end of the function we actually _have_ figured out the correct pipe. Signed-off-by:
-
Ville Syrjälä authored
VLV docs still list the the color range selection bit for the HDMI ports, but for DP ports it has been repurposed. I have no idea whether the HDMI color range selection bit still works on VLV, but since we now have to use the PIPECONF color range bit for DP, we might as well do the same for HDMI. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
VLV has the color range selection bit in the PIPECONF register. Configure it appropriately. Signed-off-by:
-
Daniel Vetter authored
Prep-patch to improve the bpc handling in a next patch. Signed-off-by: -
Christian Lamparter authored
The "Mobile Sandy Bridge CPUs" in the Fujitsu Esprimo Q900 mini desktop PCs are probably misleading the LVDS detection code in intel_lvds_supported. Nothing is connected to the LVDS ports in these systems. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Apr, 2013 10 commits
-
-
Daniel Vetter authored
Clock computations and handling are highly encoder specific, both in the optimal clock selection and also in which clocks to use and when sharing of clocks is possible. So the best place to do this is somewhere in the encoders, with a generic fallback for those encoders without special needs. To facility this, add a pipe_config->clocks_set boolean. This patch here is only prep work, it simply sets the computed clock values in pipe_config->dpll, and uses that data in the hw clock setting functions. Haswell code isn't touched, simply because Haswell clocks work much different and need their own infrastructure (with probably a Haswell-specific config->ddi_clock substruct). Reviewed-by:
-
Daniel Vetter authored
Now we can ditch the checks in the Haswell disable code. v2: add support for Haswell Reviewed-by:
-
Daniel Vetter authored
We need to be able to read out the hw state code for a bunch of reasons: - Correctly disabling boot-up/resume state. - Pure paranoia. Since not all of the pipe configuration is e.g. relevant for fastboot (or at least we can allow some wiggle room in some parameters, like the clocks), we need to add a strict_checking parameter to intel_pipe_config_compare for fastboot. For now intel_pipe_config_compare should be fully paranoid and check everything that the hw state readout code supports. Which for this infrastructure code is nothing. I've gone a bit overboard with adding 3 get_pipe_config functions: The ilk version will differ with the next patch, so it's not too onerous. v2: Don't check the hw config if the pipe is off, since an enabled, but dpms off crtc will obviously have tons of difference with the hw state. Reviewed-by:
-
Daniel Vetter authored
The only exception left is is_cpu_edp in the haswell modeset code. We need that to assign the cpu transcoder, but we might want to move that eventually into the encoder, too. \o/-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: -
Daniel Vetter authored
Jesse Barnes noticed in his review of my DP cleanup series that intel_edp_target_clock is now unused. Checking related code I've noticed that also intel_edp_link_config is long unused. Kill them both. Wrt leaky eDP functions used in the common crtc code, the only thing still left is intel_encoder_is_pch_edp. That one is just due to the massive confusion between eDP vs. DP and port A vs. port D. Crtc code should at most concern itself with the later, never with the former. But that's material for another patch series. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Daniel Vetter authored
We need it in the fdi m_n computation, which nicely kills almost all ugly special cases in there. It looks like we also need this to handle 12bpc hdmi correctly. Eventually it might be better to switch things around and put the target clock into adjusted_mode->clock and create a new pipe_config parameter for the port link clock. v2: Add a massive comment in the code to explain this mess. v3: s/dp_target_clock/pixel_target_clock in anticipation of the hdmi use-case. Reviewed-by:
-
Daniel Vetter authored
We need a flag to designate dp encoders and the dp link m_n parameters in the pipe config for that. And now that the pipe bpp computations have been moved up and stored in the pipe config, too, we can do this without losing our sanity. v2: Rebased on top of Takashi Iwai's fix to (again) fix the target clock handling for eDP. Luckily the new code is sane enough and just does the right thing! v3: Move ->has_dp_encoder to this patch (Jesse). Reviewed-by:
-
Daniel Vetter authored
There's a rather decent confusion going on around transcoder m_n values. So let's clarify: - All dp encoders need this, either on the pch transcoder if it's a pch port, or on the cpu transcoder/pipe if it's a cpu port. - fdi links need to have the right m_n values for the fdi link set in the cpu transcoder. To handle the pch vs transcoder stuff a bit better, extract transcoder set_m_n helpers. To make them simpler, set intel_crtc->cpu_transcoder als in ironlake_crtc_mode_set, so that gen5+ (where the cpu m_n registers are all at the same offset) can use it. Haswell modeset is decently confused about dp vs. edp vs. fdi. dp vs. edp works exactly the same as dp (since there's no pch dp any more), so use that as a check. And only set up the fdi m_n values if we really have a pch encoder present (which means we have a VGA encoder). On ilk+ we've called ironlake_set_m_n both for cpu_edp and for pch encoders. Now that dp_set_m_n handles all dp links (thanks to the pch encoder check), we can ditch the cpu_edp stuff from the fdi_set_m_n function. Since the dp_m_n values are not readily available, we need to carefully coax the edp values out of the encoder. Hence we can't (yet) kill this superflous complexity. v2: Rebase on top of the ivb fdi B/C check patch - we need to properly clear intel_crtc->fdi_lane, otherwise those checks will misfire. v3: Rebased on top of a s/IS_HASWELL/HAS_DDI/ patch from Paulo Zanoni. v4: Drop the addition of has_dp_encoder, it's in the wrong patch (Jesse). Reviewed-by:
-
Daniel Vetter authored
Backmerge Linux 3.9-rc5 since I want to merge a few dp clock cleanups for -next, but they will conflict all over the place with commit 9d1a455b Author: Takashi Iwai <tiwai@suse.de> Date: Mon Mar 18 11:25:36 2013 +0100 drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() from -fixes. Conflicts: drivers/gpu/drm/i915/intel_dp.c: Simply adjacent lines changed. drivers/gpu/drm/i915/intel_panel.c: A field rename in -next conflicts with a bugfix in -fixes. Take the version from -fixes and apply the rename. Signed-off-by:
-
Daniel Vetter authored
The active output is only the currently selected one, which does not imply that it's actually enabled. Since we don't use the sdvo encoder side dpms support, we need to check whether the chip-side sdvo port is enabled instead. v2: Fix up Bugzilla links. v3: Simplify logic a bit (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60138 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031 Cc: Egbert Eich <eich@pdx.freedesktop.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Egbert Eich <eich@pdx.freedesktop.org> (v2) Cc: stable@vger.kernel.org Signed-off-by:
-
- 02 Apr, 2013 4 commits
-
-
Jesse Barnes authored
We don't need this until we start using the wait event commands. v2: move to i915_irq.c (Jesse) drop unneeded sprite flip done enables (Ville) v3: drop the DPFLIPSTAT enables altogether (Ville) Signed-off-by: -
Jesse Barnes authored
Slightly different than other platforms. v2 [Jani]: Fix IOSF_BYTE_ENABLES_SHIFT shift. Use common routine. v3: drop turbo defines from this patch (Ville) use PCI_DEVFN(2,0) instead of open coding (Ville) Reviewed-by: -
Jesse Barnes authored
PPS register offsets have changed in Valleyview. v2: don't clobber port select bits on VLV when fixing up PPS timings don't bother with G4x PPS regs (Jani) Signed-off-by:Gajanan Bhat <gajanan.bhat@intel.com> Signed-off-by:
Vijay Purushothaman <vijay.a.purushothaman@intel.com> Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by:
-
Jesse Barnes authored
Needed to handle pre/post enable/disable paths on VLV and avoid a few fields that are marked reserved on VLV. v2: don't set color range or DP PLL fields (Jani) Signed-off-by:
-
