- 07 Feb, 2022 1 commit
-
-
Vinod Koul authored
Merge phy fixes for 5.17 into next branch to resolve the conflict between fixes and next for upcoming patches
-
- 02 Feb, 2022 2 commits
-
-
Allen-KH Cheng authored
This commit adds dt-binding documentation of T-Phy for Mediatek MT8186 SoC Platform. Signed-off-by:
Allen-KH Cheng <Allen-KH.Cheng@mediatek.com> Link: https://lore.kernel.org/r/20220128062050.23978-6-allen-kh.cheng@mediatek.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Liu Ying authored
The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE parameter's unit is Unit Interval(UI) and the minimum value is 8. Also, kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy mentions that it should be in UI. However, the dphy core driver wrongly sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds. So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE parameter's minimum value according to the D-PHY specification. I'm assuming that all impacted custom drivers shall program values in TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY specification mentions that the frequency of TxByteClkHS is exactly 1/8 the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant custom driver code is changed to program those values as DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then. Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK. Help is needed to test with other i.MX8mq, Meson and Rockchip platforms, as I don't have the hardwares. Fixes: 2ed86999 ("phy: Add MIPI D-PHY configuration options") Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.comSigned-off-by:
-
- 27 Jan, 2022 11 commits
-
-
Wan Jiabing authored
Fix following coccicheck warning: ./drivers/phy/mediatek/phy-mtk-tphy.c:994:6-29: duplicated argument to && or || The efuse_rx_imp is duplicate. Here should be efuse_tx_imp. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Acked-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220107025050.787720-1-wanjiabing@vivo.comSigned-off-by:
-
David Heidelberg authored
Conversion of Qualcomm USB HS phy documentation to yaml. Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211230000740.103869-1-david@ixit.czSigned-off-by:
-
Amjad Ouled-Ameur authored
Use reset_control_rearm() call if an error occurs in case phy_meson8b_usb2_power_on() fails after reset() has been called, or in case phy_meson8b_usb2_power_off() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by:
Amjad Ouled-Ameur <aouledameur@baylibre.com> Reported-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220111095255.176141-4-aouledameur@baylibre.comSigned-off-by:
-
Amjad Ouled-Ameur authored
Use the existing dev_err_probe() helper instead of open-coding the same operation. Signed-off-by:
-
Amjad Ouled-Ameur authored
Use reset_control_rearm() call if an error occurs in case phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used and the reset line may be triggered again by other devices. reset_control_rearm() keeps use of triggered_count sane in the reset framework. Therefore, use of reset_control_reset() on shared reset line should be balanced with reset_control_rearm(). Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
-
Geert Uytterhoeven authored
The Freescale/NXP i.MX8 USB3, MIPI DSI, and PCIE PHYs are only present on the NXP i.MX8 family of SoCs. Hence wrap the config symbols for these PHYs inside a check for ARCH_MXC && ARM64, to prevent asking the user about these drivers when configuring a kernel without NXP i.MX SoC family support. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Link: https://lore.kernel.org/r/393868affd830016d35f0d9aba32ccd7098c8073.1641987369.git.geert+renesas@glider.beSigned-off-by:
-
Dan Carpenter authored
This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning. Fixes: 5b1af712 ("phy: stm32: rework PLL Lock detection") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220112111724.GB3019@kiliSigned-off-by:
-
Luca Weiss authored
Add compatible for MSM8953 QUSB2 device which reuses MSM8996 configuration. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Acked-by:
Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220112194118.178026-3-luca@z3ntu.xyzSigned-off-by:
-
Luca Weiss authored
Document the compatible string used for the qusb2 phy in msm8953. Signed-off-by:
-
Marcel Ziswiler authored
Sort includes alphabethically and add a new line before the dt-bindings one as usually done. Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Link: https://lore.kernel.org/r/20220113090321.119880-1-marcel@ziswiler.comSigned-off-by:
-
Robert Hancock authored
TX_PROT_BUS_WIDTH and RX_PROT_BUS_WIDTH are single registers with separate bit fields for each lane. The code in xpsgtr_phy_init_sgmii was not preserving the existing register value for other lanes, so enabling the PHY in SGMII mode on one lane zeroed out the settings for all other lanes, causing other PS-GTR peripherals such as USB3 to malfunction. Use xpsgtr_clr_set to only manipulate the desired bits in the register. Fixes: 4a33bea0 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by:
Robert Hancock <robert.hancock@calian.com> Acked-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
-
- 24 Jan, 2022 4 commits
-
-
Ansuel Smith authored
Convert latch function to readl pool macro to tidy things up. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20220117002641.26773-2-ansuelsmth@gmail.comSigned-off-by:
-
Ansuel Smith authored
Convert some define to BITFIELD macro to tidy things up. Signed-off-by:
-
Dan Carpenter authored
There are two bugs in the error handling: 1: If devm_of_phy_provider_register() fails then there was no cleanup. 2: The error handling called of_node_put(child) improperly leading to a use after free. We are only holding the reference inside the loop so the last two gotos after the loop lead to a use after free bug. Fix this by cleaning up the partial allocations (or partial iterations) in the loop before doing the goto. Fixes: a43f72ae ("phy: cadence: Sierra: Change MAX_LANES of Sierra to 16") Fixes: 44d30d62 ("phy: cadence: Add driver for Sierra PHY") Signed-off-by:
-
Kishon Vijay Abraham I authored
_get_table_maxdiv() tries to access "clk_div_table" array out of bound defined in phy-j721e-wiz.c. Add a sentinel entry to prevent the following global-out-of-bounds error reported by enabling KASAN. [ 9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148 [ 9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38 [ 9.565926] [ 9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd-dirty #360 [ 9.576242] Hardware name: Texas Instruments J721e EVM (DT) [ 9.581832] Workqueue: events_unbound deferred_probe_work_func [ 9.587708] Call trace: [ 9.590174] dump_backtrace+0x20c/0x218 [ 9.594038] show_stack+0x18/0x68 [ 9.597375] dump_stack_lvl+0x9c/0xd8 [ 9.601062] print_address_description.constprop.0+0x78/0x334 [ 9.606830] kasan_report+0x1f0/0x260 [ 9.610517] __asan_load4+0x9c/0xd8 [ 9.614030] _get_maxdiv+0xc0/0x148 [ 9.617540] divider_determine_rate+0x88/0x488 [ 9.622005] divider_round_rate_parent+0xc8/0x124 [ 9.626729] wiz_clk_div_round_rate+0x54/0x68 [ 9.631113] clk_core_determine_round_nolock+0x124/0x158 [ 9.636448] clk_core_round_rate_nolock+0x68/0x138 [ 9.641260] clk_core_set_rate_nolock+0x268/0x3a8 [ 9.645987] clk_set_rate+0x50/0xa8 [ 9.649499] cdns_sierra_phy_init+0x88/0x248 [ 9.653794] phy_init+0x98/0x108 [ 9.657046] cdns_pcie_enable_phy+0xa0/0x170 [ 9.661340] cdns_pcie_init_phy+0x250/0x2b0 [ 9.665546] j721e_pcie_probe+0x4b8/0x798 [ 9.669579] platform_probe+0x8c/0x108 [ 9.673350] really_probe+0x114/0x630 [ 9.677037] __driver_probe_device+0x18c/0x220 [ 9.681505] driver_probe_device+0xac/0x150 [ 9.685712] __device_attach_driver+0xec/0x170 [ 9.690178] bus_for_each_drv+0xf0/0x158 [ 9.694124] __device_attach+0x184/0x210 [ 9.698070] device_initial_probe+0x14/0x20 [ 9.702277] bus_probe_device+0xec/0x100 [ 9.706223] deferred_probe_work_func+0x124/0x180 [ 9.710951] process_one_work+0x4b0/0xbc0 [ 9.714983] worker_thread+0x74/0x5d0 [ 9.718668] kthread+0x214/0x230 [ 9.721919] ret_from_fork+0x10/0x20 [ 9.725520] [ 9.727032] The buggy address belongs to the variable: [ 9.732183] clk_div_table+0x24/0x440 Fixes: 091876cc ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20220117110108.4117-1-kishon@ti.comSigned-off-by:
-
- 23 Jan, 2022 8 commits
-
-
Al Cooper authored
The previous commit 4b402fa8 ("phy: phy-brcm-usb: support PHY on the BCM4908") added a second "default" line for ARCH_BCM_4908 above the original "default" line for ARCH_BRCMSTB. When two "default" lines are used, only the first is used and this change stopped the PHY_BRCM_USB option for being enabled for ARCH_BRCMSTB. The fix is to use one "default line with "||". Fixes: 4b402fa8 ("phy: phy-brcm-usb: support PHY on the BCM4908") Signed-off-by:
Al Cooper <alcooperx@gmail.com> Acked-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211201180653.35097-4-alcooperx@gmail.comSigned-off-by:
-
Al Cooper authored
The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all). The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod. Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 14 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
Masahiro Yamada authored
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by:
-
Masahiro Yamada authored
This reverts commit cd8c917a. Commit 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf") provided the final solution. Now reverting the temporary workaround. Signed-off-by:
-
Dmitry V. Levin authored
As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
-
