- 29 Dec, 2018 1 commit
-
-
Jens Axboe authored
[ Upstream commit af097f5d ] Don't build discards bigger than what the user asked for, if the user decided to limit the size by writing to 'discard_max_bytes'. Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
- 21 Dec, 2018 39 commits
-
-
Greg Kroah-Hartman authored
-
Nicolas Schichan authored
emit_ldx_r() and emit_a32_mov_i() were both using TMP_REG_1 and clashing with each other. Using TMP_REG_2 in emit_ldx_r() fixes the issue. Fixes: ec19e02b ("ARM: net: bpf: fix LDX instructions") Cc: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Trent Piepho authored
[ Upstream commit cd7f3a24 ] In order to read correctly from asynchronously updated RTC registers, it's necessary to read repeatedly until their values do not change from read to read. It's also necessary to wait for three RTC clock ticks for certain operations. There are no timeouts in this code and these operations could possibly loop forever. To avoid kernel hangs, put in timeouts. The iMX7d can be configured to stop the SRTC on a tamper event, which will lockup the kernel inside this driver as described above. These hangs can happen when running under qemu, which doesn't emulate the SNVS RTC, though currently the driver will refuse to load on qemu due to a timeout in the driver probe method. It could also happen if the SRTC block where somehow placed into reset or the slow speed clock that drives the SRTC counter (but not the CPU) were to stop. The symptoms on a two core iMX7d are a work queue hang on rtc_timer_do_work(), which eventually blocks a systemd fsnotify operation that triggers a work queue flush, causing systemd to hang and thus causing all services that should be started by systemd, like a console getty, to fail to start or stop. Also optimize the wait code to wait less. It only needs to wait for the clock to advance three ticks, not to see it change three times. Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Israel Rukshin authored
[ Upstream commit d7dcdf9d ] nvmet_rdma_release_rsp() may free the response before using it at error flow. Fixes: 8407879c ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit ece27a33 ] Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode, tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us. tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode: Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 8469636a ] Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode, tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us. tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode: Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 0544ee4b ] Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods. This leads to the following error in dmesg: [ 5.222731] cmi: probe of SMB0001:00 failed with error -5 This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
[ Upstream commit 6c7f25ca ] According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware. The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command. The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read. To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped. Signed-off-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 993107fe ] When deleting a VLAN device using an ioctl the netdev is unregistered before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can lead to a use-after-free in mlxsw in case the VLAN device is deleted while being enslaved to a bridge. The reason for the above is that when mlxsw receives the CHANGEUPPER event, it wrongly assumes that the VLAN device is no longer its upper and thus destroys the internal representation of the bridge port despite the reference count being non-zero. Fix this by checking if the VLAN device is our upper using its real device. In net-next I'm going to remove this trick and instead make mlxsw completely agnostic to the order of the events. Fixes: c57529e1 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefan Hajnoczi authored
[ Upstream commit c38f57da ] If a local process has closed a connected socket and hasn't received a RST packet yet, then the socket remains in the table until a timeout expires. When a vhost_vsock instance is released with the timeout still pending, the socket is never freed because vhost_vsock has already set the SOCK_DONE flag. Check if the close timer is pending and let it close the socket. This prevents the race which can leak sockets. Reported-by:
Maximilian Riemensberger <riemensberger@cadami.net> Cc: Graham Whaley <graham.whaley@gmail.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Steve French authored
[ Upstream commit 6e785302 ] Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Sam Bobroff authored
[ Upstream commit e594a5e3 ] When unloading the ast driver, a warning message is printed by drm_mode_config_cleanup() because a reference is still held to one of the drm_connector structs. Correct this by calling drm_crtc_force_disable_all() in ast_fbdev_destroy(). Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.comSigned-off-by:
-
Nicolas Saenz Julienne authored
[ Upstream commit ecb239d9 ] After getting a reference to the platform device's of_node the probe function ends up calling of_find_matching_node() using the node as an argument. The function takes care of decreasing the refcount on it. We are then incorrectly decreasing the refcount on that node again. This patch removes the unwarranted call to of_node_put(). Fixes: 414fd46e ("fsl/fman: Add FMan support") Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
-
Vladimir Murzin authored
[ Upstream commit 3d0358d0 ] Chris has discovered and reported that v7_dma_inv_range() may corrupt memory if address range is not aligned to cache line size. Since the whole cache-v7m.S was lifted form cache-v7.S the same observation applies to v7m_dma_inv_range(). So the fix just mirrors what has been done for v7 with a little specific of M-class. Cc: Chris Cole <chris@sageembedded.com> Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Chris Cole authored
[ Upstream commit a1208f6a ] This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued. The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used. A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz. v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer. Signed-off-by:
Chris Cole <chris@sageembedded.com> Signed-off-by:
-
Saeed Mahameed authored
[ Upstream commit 1b603f9e ] MLX4_EN depends on NETDEVICES, ETHERNET and INET Kconfigs. Make sure they are listed in MLX4_EN Kconfig dependencies. This fixes the following build break: drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: ‘struct iphdr’ declared inside parameter list [enabled by default] struct iphdr *iph) ^ drivers/net/ethernet/mellanox/mlx4/en_rx.c:582:18: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] drivers/net/ethernet/mellanox/mlx4/en_rx.c: In function ‘get_fixed_ipv4_csum’: drivers/net/ethernet/mellanox/mlx4/en_rx.c:586:20: error: dereferencing pointer to incomplete type _u8 ipproto = iph->protocol; Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Anderson Luiz Alves authored
[ Upstream commit a7451560 ] Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by:
Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Juha-Matti Tilli authored
[ Upstream commit fd6f32f7 ] These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 6c3516fe ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Teika Kazura authored
[ Upstream commit 5a6dab15 ] SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.htmlReported-by:
Nitesh Debnath <niteshkd1999@gmail.com> Reported-by:
Teika Kazura <teika@gmx.com> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 2e85c574 ] The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda1 ("clk: mmp: add basic support functions for DT support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d9f5b7f5 ] These > comparisons should be >= to prevent reading beyond the end of of the clk_data->hws[] buffer. The clk_data->hws[] array is allocated in cp110_syscon_common_probe() when we do: cp110_clk_data = devm_kzalloc(dev, sizeof(*cp110_clk_data) + sizeof(struct clk_hw *) * CP110_CLK_NUM, GFP_KERNEL); As you can see, it has CP110_CLK_NUM elements which is equivalent to CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS. Fixes: d3da3eae ("clk: mvebu: new driver for Armada CP110 system controller") Signed-off-by:
-
Wen Yang authored
[ Upstream commit 098336de ] The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit a51921c0 ] use of_node_put() to release the refcount. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit dac097c4 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 6bd520ab ] use of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 87d81a23 ] use of_node_put() to release the refcount. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 0a9a4304 ] If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress. Fixes: 0b9e7943 ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Dave Kleikamp authored
[ Upstream commit ad3cba22 ] When we use direct_IO with an NFS backing store, we can trigger a WARNING in __set_page_dirty(), as below, since we're dirtying the page unnecessarily in nfs_direct_read_completion(). To fix, replicate the logic in commit 53cbf3b1 ("fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read"). Other filesystems that implement direct_IO handle this; most use blockdev_direct_IO(). ceph and cifs have similar logic. mount 127.0.0.1:/export /nfs dd if=/dev/zero of=/nfs/image bs=1M count=200 losetup --direct-io=on -f /nfs/image mkfs.btrfs /dev/loop0 mount -t btrfs /dev/loop0 /mnt/ kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0 kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_ kernel: snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G E 4.20.0-rc1.master.20181111.ol7.x86_64 #1 kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 kernel: Workqueue: nfsiod rpc_async_release [sunrpc] kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0 kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8 kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046 kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0 kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080 kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0 kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001 kernel: FS: 0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: __set_page_dirty_buffers+0xb6/0x110 kernel: set_page_dirty+0x52/0xb0 kernel: nfs_direct_read_completion+0xc4/0x120 [nfs] kernel: nfs_pgio_release+0x10/0x20 [nfs] kernel: rpc_free_task+0x30/0x70 [sunrpc] kernel: rpc_async_release+0x12/0x20 [sunrpc] kernel: process_one_work+0x174/0x390 kernel: worker_thread+0x4f/0x3e0 kernel: kthread+0x102/0x140 kernel: ? drain_workqueue+0x130/0x130 kernel: ? kthread_stop+0x110/0x110 kernel: ret_from_fork+0x35/0x40 kernel: ---[ end trace 01341980905412c9 ]--- Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> [forward-ported to v4.20] Signed-off-by:
Calum Mackay <calum.mackay@oracle.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
David Miller authored
[ Upstream commit c01ac66b ] The message got changed a lot time ago. This was responsible for 36 test case failures on sparc64. Fixes: f1174f77 ("bpf/verifier: rework value tracking") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Toni Peltonen authored
[ Upstream commit 3b5b3a33 ] Previously when unbinding a slave the 802.3ad implementation only told partner that the port is not suitable for aggregation by setting the port aggregation state from aggregatable to individual. This is not enough. If the physical layer still stays up and we only unbinded this port from the bond there is nothing in the aggregation status alone to prevent the partner from sending traffic towards us. To ensure that the partner doesn't consider this port at all anymore we should also disable collecting and distributing to signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to ensure partner exits collecting + distributing state. I have tested this behaviour againts Arista EOS switches with mlx5 cards (physical link stays up even when interface is down) and simulated the same situation virtually Linux <-> Linux with two network namespaces running two veth device pairs. In both cases setting aggregation to individual doesn't alone prevent traffic from being to sent towards this port given that the link stays up in partners end. Partner still keeps it's end in collecting + distributing state and continues until timeout is reached. In most cases this means we are losing the traffic partner sends towards our port while we wait for timeout. This is most visible with slow periodic time (LACP rate slow). Other open source implementations like Open VSwitch and libreswitch, and vendor implementations like Arista EOS, seem to disable collecting + distributing to when doing similar port disabling/detaching/removing change. With this patch kernel implementation would behave the same way and ensure partner doesn't consider our actor viable anymore. Signed-off-by:
Toni Peltonen <peltzi@peltzi.fi> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 10d44343 ] Some ARC CPU's do not support unaligned loads/stores. Currently, generic implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC. This can lead to misfunction of some drivers as generic functions do a plain dereference of a pointer that can be unaligned. Let's use {get/put}_unaligned() helpers instead of plain dereference of pointer in order to fix. The helpers allow to get and store data from an unaligned address whilst preserving the CPU internal alignment. According to [1], the use of these helpers are costly in terms of performance so we added an initial check for a buffer already aligned so that the usage of the helpers can be avoided, when possible. [1] Documentation/unaligned-memory-access.txt Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David Laight <David.Laight@ACULAB.COM> Tested-by:
Vitor Soares <soares@synopsys.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sean Paul authored
[ Upstream commit 3b712e43 ] Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
YiFei Zhu authored
[ Upstream commit 79c2206d ] An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full. This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold. Signed-off-by:
YiFei Zhu <zhuyifei1999@gmail.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Cathy Avery authored
[ Upstream commit 02f425f8 ] Currently pvscsi_remove calls free_irq more than once as pvscsi_release_resources and __pvscsi_shutdown both call pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ' warning and stack trace. To solve the problem pvscsi_shutdown_intr has been moved out of pvscsi_release_resources. Signed-off-by:
Cathy Avery <cavery@redhat.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
-
Fred Herard authored
[ Upstream commit 5db6dd14 ] This commit addresses NULL pointer dereference in iscsi_eh_session_reset. Reference should not be made to session->leadconn when session->state is set to ISCSI_STATE_TERMINATE. Signed-off-by:
Fred Herard <fred.herard@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit 10f91c73 ] It makes little sense but still possible to put Hyper-V guests into suspend-to-idle state. To wake them up two wakeup sources were registered in the past: hyperv-keyboard and hid-hyperv. However, since commit eed4d47e ("ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch to pm_wakeup_hard_event() API as these devices are actually the only possible way to wakeup Hyper-V guests. Fixes: eed4d47e (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 05cc09de ] There is no unregister netlink notifier and family on error paths in init_mac80211_hwsim(). Also there is an error path where hwsim_class is not destroyed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 62759361 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
[ Upstream commit 6cc65be4 ] One of my tests compiles the kernel with gcc 4.5.3, and I hit the following build error: include/linux/semaphore.h: In function 'sema_init': include/linux/semaphore.h:35:17: error: unknown field 'val' specified in initializer include/linux/semaphore.h:35:17: warning: missing braces around initializer include/linux/semaphore.h:35:17: warning: (near initialization for '(anonymous).raw_lock.<anonymous>.val') I bisected it down to: 625e88be ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") ... which makes qspinlock have an anonymous union, which makes initializing it special for older compilers. By adding strategic brackets, it makes the build happy again. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Waiman Long <longman@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 625e88be ("locking/qspinlock: Merge 'struct __qspinlock' into 'struct qspinlock'") Link: http://lkml.kernel.org/r/20180621203526.172ab5c4@vmware.local.homeSigned-off-by:
-
