- 25 Apr, 2022 5 commits
-
-
Hao Chen authored
For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is aligned to the right, it's not aligned with output of other debugfs node, so uniform their output info. Fixes: 907676b1 ("net: hns3: use tx bounce buffer for small packets") Fixes: e44c495d ("net: hns3: refactor queue info of debugfs") Fixes: 77e91848 ("net: hns3: refactor dump bd info of debugfs") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
If failed to register netdev, it needs to clear INITED state and stop client in case of cause problem when concurrency with uninitialized process of driver. Fixes: a289a7e5 ("net: hns3: put off calling register_netdev() until client initialize complete") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect printing of memory size of IPVS connection hash table, from Pengcheng Yang. 2) Fix spurious EEXIST errors in nft_set_rbtree. 3) Remove leftover empty flowtable file, from Rongguang Wei. 4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Martin Willi authored
The commit referenced below fixed packet re-routing if Netfilter mangles a routing key property of a packet and the packet is routed in a VRF L3 domain. The fix, however, addressed IPv4 re-routing, only. This commit applies the same behavior for IPv6. While at it, untangle the nested ternary operator to make the code more readable. Fixes: 6d8b49c3 ("netfilter: Update ip_route_me_harder to consider L3 domain") Cc: stable@vger.kernel.org Signed-off-by: Martin Willi <martin@strongswan.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Rongguang Wei authored
CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also removed(nf_flow_table_ipv4.c is empty). Fixes: c42ba429 ("netfilter: flowtable: remove ipv4/ipv6 modules") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 23 Apr, 2022 1 commit
-
-
Xin Long authored
A null pointer reference issue can be triggered when the response of a stream reconf request arrives after the timer is triggered, such as: send Incoming SSN Reset Request ---> CPU0: reconf timer is triggered, go to the handler code before hold sk lock <--- reply with Outgoing SSN Reset Request CPU1: process Outgoing SSN Reset Request, and set asoc->strreset_chunk to NULL CPU0: continue the handler code, hold sk lock, and try to hold asoc->strreset_chunk, crash! In Ying Xu's testing, the call trace is: [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp] [ ] Call Trace: [ ] <IRQ> [ ] sctp_sf_send_reconf+0x2c/0x100 [sctp] [ ] sctp_do_sm+0xa4/0x220 [sctp] [ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp] [ ] call_timer_fn+0x26/0x130 This patch is to fix it by returning from the timer handler if asoc strreset_chunk is already set to NULL. Fixes: 7b9438de ("sctp: add stream reconf timer") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Apr, 2022 12 commits
-
-
Dinh Nguyen authored
I made a mistake with the commit a6aaa003 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"). I should have tested against both scenario of having a SGMII interface and one without. Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is NULL, thus a write to this address will fail. Cc: stable@vger.kernel.org Fixes: a6aaa003 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link") Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220420152345.27415-1-dinguyen@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jason A. Donenfeld says: ==================== wireguard patches for 5.18-rc4 Here are two small wireguard fixes for 5.18-rc4: 1) We enable ACPI in the QEMU test harness, so that multiple CPUs are actually used on x86 for testing for races. 2) Sending skbs with metadata dsts attached resulted in a null pointer dereference, triggerable from executing eBPF programs. The fix is a oneliner, changing a skb_dst() null check into a skb_valid_dst() boolean check. ==================== Link: https://lore.kernel.org/r/20220421134805.279118-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Nikolay Aleksandrov authored
When we try to transmit an skb with md_dst attached through wireguard we hit a null pointer dereference in wg_xmit() due to the use of dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to dereference dst->dev. Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which checks for DST_METADATA flag, and if it's set, then falls back to wireguard's device mtu. That gives us the best chance of transmitting the packet; otherwise if the blackhole netdev is used we'd get ETH_MIN_MTU. [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0 [ 263.693908] #PF: supervisor read access in kernel mode [ 263.694174] #PF: error_code(0x0000) - not-present page [ 263.694424] PGD 0 P4D 0 [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522 [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20 [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00 [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246 [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000 [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900 [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002 [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00 [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000 [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000 [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0 [ 263.699214] Call Trace: [ 263.699505] <TASK> [ 263.699759] wg_xmit+0x411/0x450 [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0 [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0 [ 263.700719] dev_hard_start_xmit+0xd9/0x220 [ 263.701047] __dev_queue_xmit+0x8b9/0xd30 [ 263.701344] __bpf_redirect+0x1a4/0x380 [ 263.701664] __dev_queue_xmit+0x83b/0xd30 [ 263.701961] ? packet_parse_headers+0xb4/0xf0 [ 263.702275] packet_sendmsg+0x9a8/0x16a0 [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 263.702933] sock_sendmsg+0x5e/0x60 [ 263.703239] __sys_sendto+0xf0/0x160 [ 263.703549] __x64_sys_sendto+0x20/0x30 [ 263.703853] do_syscall_64+0x3b/0x90 [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 263.704494] RIP: 0033:0x7f3704d50506 [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506 [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003 [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014 [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90 [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001 [ 263.708132] </TASK> [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge] [ 263.708942] CR2: 00000000000000e0 Fixes: e7096c13 ("net: WireGuard secure network tunnel") Link: https://github.com/cilium/cilium/issues/19428Reported-by: Martynas Pumputis <m@lambda.lt> Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
It turns out that by having CONFIG_ACPI=n, we've been failing to boot additional CPUs, and so these systems were functionally UP. The code bloat is unfortunate for build times, but I don't see an alternative. So this commit sets CONFIG_ACPI=y for x86_64 and i686 configs. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pengcheng Yang authored
If an ACK (s)acks multiple skbs, we favor the information from the most recently sent skb by choosing the skb with the highest prior_delivered count. But in the interval between receiving ACKs, we send multiple skbs with the same prior_delivered, because the tp->delivered only changes when we receive an ACK. We used RACK's solution, copying tcp_rack_sent_after() as tcp_skb_sent_after() helper to determine "which packet was sent last?". Later, we will use tcp_skb_sent_after() instead in RACK. Fixes: b9f64820 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Luiz Angelo Daros de Luca authored
There is no need to add new compatible strings for each new supported chip version. The compatible string is used only to select the subdriver (rtl8365mb.c or rtl8366rb.c). Once in the subdriver, it will detect the chip model by itself, ignoring which compatible string was used. Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20220418233558.13541-2-luizluca@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Luiz Angelo Daros de Luca authored
Compatible strings are used to help the driver find the chip ID/version register for each chip family. After that, the driver can setup the switch accordingly. Keep only the first supported model for each family as a compatible string and reference other chip models in the description. The removed compatible strings have never been used in a released kernel. Link: https://lore.kernel.org/netdev/20220414014055.m4wbmr7tdz6hsa3m@bang-olufsen.dk/Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Link: https://lore.kernel.org/r/20220418233558.13541-1-luizluca@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Clément Léger authored
br_vlan_group() can return NULL and thus return value must be checked to avoid dereferencing a NULL pointer. Fixes: 6284c723 ("net: bridge: mst: Notify switchdev drivers of VLAN MSTI migrations") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220421101247.121896-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Francesco Ruggeri authored
In tcp_create_openreq_child we adjust tcp_header_len for md5 using the remote address in newsk. But that address is still 0 in newsk at this point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock). Use the address from the request socket instead. Fixes: cfb6eeb4 ("[TCP]: MD5 Signature Option (RFC2385) support.") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pablo Neira Ayuso authored
This patch fixes spurious EEXIST errors. Extend d2df92e9 ("netfilter: nft_set_rbtree: handle element re-addition after deletion") to deal with elements with same end flags in the same transation. Reset the overlap flag as described by 7c84d414 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion"). Fixes: 7c84d414 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Fixes: d2df92e9 ("netfilter: nft_set_rbtree: handle element re-addition after deletion") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Miaoqian Lin authored
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. of_node_put() will check for NULL value. Fixes: a20f9970 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Lv Ruyi authored
If major equal 0, register_chrdev() returns error code when it fails. This function dynamically allocate a major and return its number on success, so we should use "< 0" to check it instead of "!". Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Apr, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from xfrm and can. Current release - regressions: - rxrpc: restore removed timer deletion Current release - new code bugs: - gre: fix device lookup for l3mdev use-case - xfrm: fix egress device lookup for l3mdev use-case Previous releases - regressions: - sched: cls_u32: fix netns refcount changes in u32_change() - smc: fix sock leak when release after smc_shutdown() - xfrm: limit skb_page_frag_refill use to a single page - eth: atlantic: invert deep par in pm functions, preventing null derefs - eth: stmmac: use readl_poll_timeout_atomic() in atomic state Previous releases - always broken: - gre: fix skb_under_panic on xmit - openvswitch: fix OOB access in reserve_sfa_size() - dsa: hellcreek: calculate checksums in tagger - eth: ice: fix crash in switchdev mode - eth: igc: - fix infinite loop in release_swfw_sync - fix scheduling while atomic" * tag 'net-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits) drivers: net: hippi: Fix deadlock in rr_close() selftests: mlxsw: vxlan_flooding_ipv6: Prevent flooding of unwanted packets selftests: mlxsw: vxlan_flooding: Prevent flooding of unwanted packets nfc: MAINTAINERS: add Bug entry net: stmmac: Use readl_poll_timeout_atomic() in atomic state doc/ip-sysctl: add bc_forwarding netlink: reset network and mac headers in netlink_dump() net: mscc: ocelot: fix broken IP multicast flooding net: dsa: hellcreek: Calculate checksums in tagger net: atlantic: invert deep par in pm functions, preventing null derefs can: isotp: stop timeout monitoring when no first frame was sent bonding: do not discard lowest hash bit for non layer3+4 hashing net: lan966x: Make sure to release ptp interrupt ipv6: make ip6_rt_gc_expire an atomic_t net: Handle l3mdev in ip_tunnel_init_flow l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu net/sched: cls_u32: fix possible leak in u32_init_knode() net/sched: cls_u32: fix netns refcount changes in u32_change() powerpc: Update MAINTAINERS for ibmvnic and VAS net: restore alpha order to Ethernet devices in config ...
-
Duoming Zhou authored
There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 20 Apr, 2022 9 commits
-
-
https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtensa fixes from Max Filippov: - fix patching CPU selection in patch_text - fix potential deadlock in ISS platform serial driver - fix potential register clobbering in coprocessor exception handler * tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: fix a7 clobbering in coprocessor context load/store arch: xtensa: platforms: Fix deadlock in rs_close() xtensa: patch_text: Fixup last cpu should be master
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fixes from Gao Xiang: "One patch to fix a use-after-free race related to the on-stack z_erofs_decompressqueue, which happens very rarely but needs to be fixed properly soon. The other patch fixes some sysfs Sphinx warnings" * tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors erofs: fix use-after-free of on-stack io[]
-
Linus Torvalds authored
This reverts commit 5a519c8f. It turns out that making the pipe almost arbitrarily large has some rather unexpected downsides. The kernel test robot reports a kernel warning that is due to pipe->max_usage now growing to the point where the iter_file_splice_write() buffer allocation can no longer be satisfied as a slab allocation, and the int nbufs = pipe->max_usage; struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec), GFP_KERNEL); code sequence there will now always fail as a result. That code could be modified to use kvcalloc() too, but I feel very uncomfortable making those kinds of changes for a very niche use case that really should have other options than make these kinds of fundamental changes to pipe behavior. Maybe the CRIU process dumping should be multi-threaded, and use multiple pipes and multiple cores, rather than try to use one larger pipe to minimize splice() calls. Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/ Cc: Andrei Vagin <avagin@gmail.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB. The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior. For example: suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1; so we copy just one byte "and" dest remains unaligned. This patch fixes the bug by replacing unsigned with size_t. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ido Schimmel authored
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: 94d302de ("selftests: mlxsw: Add a test for VxLAN flooding") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Add a Bug section, indicating preferred mailing method for bug reports, to NFC Subsystem entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kevin Hao authored
The init_systime() may be invoked in atomic state. We have observed the following call trace when running "phc_ctl /dev/ptp0 set" on a Intel Agilex board. BUG: sleeping function called from invalid context at drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c:74 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 381, name: phc_ctl preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffff80000892ef78>] stmmac_set_time+0x34/0x8c CPU: 2 PID: 381 Comm: phc_ctl Not tainted 5.18.0-rc2-next-20220414-yocto-standard+ #567 Hardware name: SoCFPGA Agilex SoCDK (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x24/0x40 dump_stack_lvl+0x7c/0xa0 dump_stack+0x18/0x34 __might_resched+0x154/0x1c0 __might_sleep+0x58/0x90 init_systime+0x78/0x120 stmmac_set_time+0x64/0x8c ptp_clock_settime+0x60/0x9c pc_clock_settime+0x6c/0xc0 __arm64_sys_clock_settime+0x88/0xf0 invoke_syscall+0x5c/0x130 el0_svc_common.constprop.0+0x4c/0x100 do_el0_svc+0x7c/0xa0 el0_svc+0x58/0xcc el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 So we should use readl_poll_timeout_atomic() here instead of readl_poll_timeout(). Also adjust the delay time to 10us to fix a "__bad_udelay" build error reported by "kernel test robot <lkp@intel.com>". I have tested this on Intel Agilex and NXP S32G boards, there is no delay needed at all. So the 10us delay should be long enough for most cases. Fixes: ff8ed737 ("net: stmmac: use readl_poll_timeout() function in init_systime()") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
Let's describe this sysctl. Fixes: 5cbf777c ("route: add support for directed broadcast forwarding") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Apr, 2022 7 commits
-
-
Song Liu authored
Huge page backed vmalloc memory could benefit performance in many cases. However, some users of vmalloc may not be ready to handle huge pages for various reasons: hardware constraints, potential pages split, etc. VM_NO_HUGE_VMAP was introduced to allow vmalloc users to opt-out huge pages. However, it is not easy to track down all the users that require the opt-out, as the allocation are passed different stacks and may cause issues in different layers. To address this issue, replace VM_NO_HUGE_VMAP with an opt-in flag, VM_ALLOW_HUGE_VMAP, so that users that benefit from huge pages could ask specificially. Also, remove vmalloc_no_huge() and add opt-in helper vmalloc_huge(). Fixes: fac54e2b ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP") Link: https://lore.kernel.org/netdev/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/" Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Rik van Riel <riel@surriel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A few more fixes for SPI, plus one new PCI ID for another Intel chipset. All device specific stuff" * tag 'spi-fix-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controller spi: cadence-quadspi: fix incorrect supports_op() return value spi: intel: Add support for Raptor Lake-S SPI serial flash spi: spi-mtk-nor: initialize spi controller after resume
-
Christian Brauner authored
Last cycle we extended the idmapped mounts infrastructure to support idmapped mounts of idmapped filesystems (No such filesystem yet exist.). Since then, the meaning of an idmapped mount is a mount whose idmapping is different from the filesystems idmapping. While doing that work we missed to adapt the acl translation helpers. They still assume that checking for the identity mapping is enough. But they need to use the no_idmapping() helper instead. Note, POSIX ACLs are always translated right at the userspace-kernel boundary using the caller's current idmapping and the initial idmapping. The order depends on whether we're coming from or going to userspace. The filesystem's idmapping doesn't matter at the border. Consequently, if a non-idmapped mount is passed we need to make sure to always pass the initial idmapping as the mount's idmapping and not the filesystem idmapping. Since it's irrelevant here it would yield invalid ids and prevent setting acls for filesystems that are mountable in a userns and support posix acls (tmpfs and fuse). I verified the regression reported in [1] and verified that this patch fixes it. A regression test will be added to xfstests in parallel. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215849 [1] Fixes: bd303368 ("fs: support mapped mounts of mapped filesystems") Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> # 5.17 Cc: <regressions@lists.linux.dev> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Dumazet authored
netlink_dump() is allocating an skb, reserves space in it but forgets to reset network header. This allows a BPF program, invoked later from sk_filter() to access uninitialized kernel memory from the reserved space. Theorically mac header reset could be omitted, because it is set to a special initial value. bpf_internal_load_pointer_neg_helper calls skb_mac_header() without checking skb_mac_header_was_set(). Relying on skb->len not being too big seems fragile. We also could add a sanity check in bpf_internal_load_pointer_neg_helper() to avoid surprises in the future. syzbot report was: BUG: KMSAN: uninit-value in ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 ___bpf_prog_run+0xa22b/0xb420 kernel/bpf/core.c:1637 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was stored to memory at: ___bpf_prog_run+0x96c/0xb420 kernel/bpf/core.c:1558 __bpf_prog_run32+0x121/0x180 kernel/bpf/core.c:1796 bpf_dispatcher_nop_func include/linux/bpf.h:784 [inline] __bpf_prog_run include/linux/filter.h:626 [inline] bpf_prog_run include/linux/filter.h:633 [inline] __bpf_prog_run_save_cb+0x168/0x580 include/linux/filter.h:756 bpf_prog_run_save_cb include/linux/filter.h:770 [inline] sk_filter_trim_cap+0x3bc/0x8c0 net/core/filter.c:150 sk_filter include/linux/filter.h:905 [inline] netlink_dump+0xe0c/0x16c0 net/netlink/af_netlink.c:2276 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3244 [inline] __kmalloc_node_track_caller+0xde3/0x14f0 mm/slub.c:4972 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1158 [inline] netlink_dump+0x30f/0x16c0 net/netlink/af_netlink.c:2242 netlink_recvmsg+0x1129/0x1c80 net/netlink/af_netlink.c:2002 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_read_iter+0x5a9/0x630 net/socket.c:1039 do_iter_readv_writev+0xa7f/0xc70 do_iter_read+0x52c/0x14c0 fs/read_write.c:786 vfs_readv fs/read_write.c:906 [inline] do_readv+0x432/0x800 fs/read_write.c:943 __do_sys_readv fs/read_write.c:1034 [inline] __se_sys_readv fs/read_write.c:1031 [inline] __x64_sys_readv+0xe5/0x120 fs/read_write.c:1031 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x44/0xae CPU: 0 PID: 3470 Comm: syz-executor751 Not tainted 5.17.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: db65a3aa ("netlink: Trim skb to alloc size to avoid MSG_TRUNC") Fixes: 9063e21f ("netlink: autosize skb lengthes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220415181442.551228-1-eric.dumazet@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pengcheng Yang authored
The memory size of ip_vs_conn_tab changed after we use hlist instead of list. Fixes: 731109e7 ("ipvs: use hlist instead of list") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Julian Anastasov <ja@ssi.bg> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Vladimir Oltean authored
When the user runs: bridge link set dev $br_port mcast_flood on this command should affect not only L2 multicast, but also IPv4 and IPv6 multicast. In the Ocelot switch, unknown multicast gets flooded according to different PGIDs according to its type, and PGID_MC only handles L2 multicast. Therefore, by leaving PGID_MCIPV4 and PGID_MCIPV6 at their default value of 0, unknown IP multicast traffic is never flooded. Fixes: 421741ea ("net: mscc: ocelot: offload bridge port flags to device") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220415151950.219660-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Kurt Kanzenbach authored
In case the checksum calculation is offloaded to the DSA master network interface, it will include the switch trailing tag. As soon as the switch strips that tag on egress, the calculated checksum is wrong. Therefore, add the checksum calculation to the tagger (if required) before adding the switch tag. This way, the hellcreek code works with all DSA master interfaces regardless of their declared feature set. Fixes: 01ef09ca ("net: dsa: Add tag handling for Hirschmann Hellcreek switches") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220415103320.90657-1-kurt@linutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
- 18 Apr, 2022 2 commits
-
-
Manuel Ullmann authored
This will reset deeply on freeze and thaw instead of suspend and resume and prevent null pointer dereferences of the uninitialized ring 0 buffer while thawing. The impact is an indefinitely hanging kernel. You can't switch consoles after this and the only possible user interaction is SysRq. BUG: kernel NULL pointer dereference RIP: 0010:aq_ring_rx_fill+0xcf/0x210 [atlantic] aq_vec_init+0x85/0xe0 [atlantic] aq_nic_init+0xf7/0x1d0 [atlantic] atl_resume_common+0x4f/0x100 [atlantic] pci_pm_thaw+0x42/0xa0 resolves in aq_ring.o to ``` 0000000000000ae0 <aq_ring_rx_fill>: { /* ... */ baf: 48 8b 43 08 mov 0x8(%rbx),%rax buff->flags = 0U; /* buff is NULL */ ``` The bug has been present since the introduction of the new pm code in 8aaa112a ("net: atlantic: refactoring pm logic") and was hidden until 8ce84271 ("net: atlantic: changes for multi-TC support"), which refactored the aq_vec_{free,alloc} functions into aq_vec_{,ring}_{free,alloc}, but is technically not wrong. The original functions just always reinitialized the buffers on S3/S4. If the interface is down before freezing, the bug does not occur. It does not matter, whether the initrd contains and loads the module before thawing. So the fix is to invert the boolean parameter deep in all pm function calls, which was clearly intended to be set like that. First report was on Github [1], which you have to guess from the resume logs in the posted dmesg snippet. Recently I posted one on Bugzilla [2], since I did not have an AQC device so far. #regzbot introduced: 8ce84271 #regzbot from: koo5 <kolman.jindrich@gmail.com> #regzbot monitor: https://github.com/Aquantia/AQtion/issues/32 Fixes: 8aaa112a ("net: atlantic: refactoring pm logic") Link: https://github.com/Aquantia/AQtion/issues/32 [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215798 [2] Cc: stable@vger.kernel.org Reported-by: koo5 <kolman.jindrich@gmail.com> Signed-off-by: Manuel Ullmann <labre@posteo.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.18-20220417' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-04-17 this is a pull request of 1 patch for net/master. The patch is by Oliver Hartkopp and fixes a timeout monitoring problem in the ISO TP protocol found by the syzbot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Apr, 2022 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixlet from Juergen Gross: "A single cleanup patch for the Xen balloon driver" * tag 'for-linus-5.18-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't use PV mode extra memory for zone device allocations
-