- 07 Dec, 2006 40 commits
-
-
Mike Miller authored
A pretty simple cleanup for cciss_interrupt_mode. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Mike Miller authored
Add the support for a large number of logical volumes. We will soon have hardware that support up to 1024 logical volumes. Signed-off-by:
-
Mike Miller authored
Remove the no longer used revalidate_allvol function. It was replaced by rebuild_lun_table. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Mike Miller authored
Change our open to test for drv->heads like we do in other places in the driver. Mostly for consistency. Signed-off-by:
-
Mike Miller authored
Change the blk_queue_max_sectors from 512 to 2048. This helps increase performance. [akpm@osdl.org: s/sector_size/max_sectors/] Signed-off-by:
-
Mike Miller authored
Unconditionally disable DMA prefetch on the P600 controller. An ASIC bug may result in prefetching beyond the end of physical memory. Signed-off-by:
-
Mike Miller authored
Change the SSID on the E500 as a workaround for a firmware bug. It looks like the original patch was backed out between rc2 and rc4. Signed-off-by:
-
Mike Miller authored
Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds. Most Smart Array controllers can support up to 1024 commands but the E200 family can only support 128. To prevent annoying "fifo full" messages we define nr_cmds on a per controller basis by adding it the product table. Signed-off-by:
-
Mike Miller authored
Add the support to fire up on any HP RAID class device that has a valid cciss signature. Signed-off-by:
-
Mike Miller authored
Change the cciss version number to 3.6.14 to reflect the following functionality changes added by the rest of the set. They include: - Support to fire up on any HP RAID class controller - Increase nr_cmds to 512 for most controllers by adding it to the product table - PCI subsystem ID fix fix was pulled - Disable DMA prefetch for the P600 on IPF platforms - Change from 512 to 2048 sector_size for performance - Fix in cciss_open for consistency - Remove the no longer used revalidate_allvol function - Bug fix for busy configuring - Support for more than 16 logical volumes - Cleanups in cciss_interrupt_mode - Fix for iostats, it's been broken for several kernel releases Signed-off-by:
-
Adrian Bunk authored
More fallout of the post 2.6.19-rc1 IRQ changes... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/rtc.h:102, from /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/efi.h:19, from /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/init/main.c:43: /home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/interrupt.h:67: error: conflicting types for 'irq_handler_t' include2/asm/irq.h:49: error: previous declaration of 'irq_handler_t' was here Signed-off-by:Adrian Bunk <bunk@stusta.de> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Signed-off-by:
-
Jeff Dike authored
When the UML network driver generates random MACs for its devices, it was possible for a number of UMLs to get the same MACs because the ethernet initialization was done before the random pool was properly seeded. This patch moves the initialization later so that it gets better randomness. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
We were using the wrong symbol to size register files. Signed-off-by:
-
Jeff Dike authored
Include the proper header to get a definition of PAGE_SHIFT. Signed-off-by:
-
Jeff Dike authored
We were not including stddef.h in files that used offsetof. One file was also including linux/stddef.h for no perciptible reason. Signed-off-by:
-
Yan Burman authored
Replace kmalloc+memset with kzalloc Signed-off-by:
Yan Burman <burman.yan@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Rafael J. Wysocki authored
Make the workqueues used by XFS freezeable, so their worker threads don't submit any I/O after the suspend image has been created. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@suspend2.net> Cc: David Chinner <dgc@sgi.com> Signed-off-by:
-
Rafael J. Wysocki authored
Make it possible to create a workqueue the worker thread of which will be frozen during suspend, along with other kernel threads. Signed-off-by:
-
Pavel Machek authored
Cleanup write-only variable, suggested by D Binderman. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Rafael J. Wysocki authored
The 'testproc' swsusp debug mode thaws tasks twice in a row, which is _very_ confusing. Fix that. Signed-off-by:
-
Pavel Machek authored
Linus posted quite nice TRACE_RESUME how-to, and I think it is too nice to be hidden in archives of mailing list, so I turned it into Documentation piece. Signed-off-by:
-
Rafael J. Wysocki authored
Move all labels in the swsusp code to the second column, so that they won't fool diff -p. Signed-off-by:
-
Rafael J. Wysocki authored
Fix coding style in suspend.c. Signed-off-by:
-
Rafael J. Wysocki authored
Move the loop from freeze_processes() to a separate function and call it independently for user space processes and kernel threads so that the order of freezing tasks is clearly visible. Signed-off-by:
-
Rafael J. Wysocki authored
Move the loop from thaw_processes() to a separate function and call it independently for kernel threads and user space processes so that the order of thawing tasks is clearly visible. Drop thaw_kernel_threads() which is never used. Signed-off-by:
-
Stephen Hemminger authored
The power management semaphore is only used as mutex, so convert it. [akpm@osdl.org: fix rotten bug] Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
-
Rafael J. Wysocki authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7534 Fix the freezing of processes so that it won't fail if there is a traced process the parent of which has been stopped. Signed-off-by:
-
Rafael J. Wysocki authored
Make swsusp measure and print the time needed to shrink memory during the suspend. Signed-off-by:
-
Siddha, Suresh B authored
Don't modify the cpus_allowed of the task initiating the suspend. _cpu_down() already makes sure that the task doing the suspend doesn't run on dying cpu. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@suspend2.net> Signed-off-by:
-
Rafael J. Wysocki authored
Make swsusp support i386 systems with PAE or without PSE. This is done by creating temporary page tables located in resume-safe page frames before the suspend image is restored in the same way as x86_64 does it. Signed-off-by:
-
Nigel Cunningham authored
Modify process thawing so that we can thaw kernel space without thawing userspace, and thaw kernelspace first. This will be useful in later patches, where I intend to get swsusp thawing kernel threads only before seeking to free memory. Signed-off-by:
Nigel Cunningham <nigel@suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Nigel Cunningham authored
Minor whitespace and formatting modifications for the freezer. Signed-off-by:
-
Nigel Cunningham authored
The freezer currently prints an '=' for every process that is frozen. This is pretty pointless, as the equals sign says nothing about which process is frozen, and makes logs look messier (especially if there were a large number of processes running). All we really need to know is that we started trying to freeze processes and what processes (if any) failed to freeze, or that we succeeded. Signed-off-by:
-
Nigel Cunningham authored
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by:
-
Stefan Seyfried authored
At some point after 2.6.13, in-kernel software suspend got "incomplete" for the so-called "platform" mode. pm_ops->prepare() is never called. A visible sign of this is the "moon" light on thinkpads not flashing during suspend. Fix by readding the pm_ops->prepare call during suspend. Signed-off-by:
Stefan Seyfried <seife@suse.de> Acked-by:
-
Rafael J. Wysocki authored
swsusp uses GFP_ATOMIC, but it can afford to use __GFP_WAIT, which will permit it to reclaim clean pagecache instead of emitting scary page-allocation-failure messages. Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Currently swsusp saves the contents of highmem pages by copying them to the normal zone which is quite inefficient (eg. it requires two normal pages to be used for saving one highmem page). This may be improved by using highmem for saving the contents of saveable highmem pages. Namely, during the suspend phase of the suspend-resume cycle we try to allocate as many free highmem pages as there are saveable highmem pages. If there are not enough highmem image pages to store the contents of all of the saveable highmem pages, some of them will be stored in the "normal" memory. Next, we allocate as many free "normal" pages as needed to store the (remaining) image data. We use a memory bitmap to mark the allocated free pages (ie. highmem as well as "normal" image pages). Now, we use another memory bitmap to mark all of the saveable pages (highmem as well as "normal") and the contents of the saveable pages are copied into the image pages. Then, the second bitmap is used to save the pfns corresponding to the saveable pages and the first one is used to save their data. During the resume phase the pfns of the pages that were saveable during the suspend are loaded from the image and used to mark the "unsafe" page frames. Next, we try to allocate as many free highmem page frames as to load all of the image data that had been in the highmem before the suspend and we allocate so many free "normal" page frames that the total number of allocated free pages (highmem and "normal") is equal to the size of the image. While doing this we have to make sure that there will be some extra free "normal" and "safe" page frames for two lists of PBEs constructed later. Now, the image data are loaded, if possible, into their "original" page frames. The image data that cannot be written into their "original" page frames are loaded into "safe" page frames and their "original" kernel virtual addresses, as well as the addresses of the "safe" pages containing their copies, are stored in one of two lists of PBEs. One list of PBEs is for the copies of "normal" suspend pages (ie. "normal" pages that were saveable during the suspend) and it is used in the same way as previously (ie. by the architecture-dependent parts of swsusp). The other list of PBEs is for the copies of highmem suspend pages. The pages in this list are restored (in a reversible way) right before the arch-dependent code is called. Signed-off-by:
-
Rafael J. Wysocki authored
The swsusp userland interface has recently changed for a couple of times, but the changes have not been documented. Fix this, and document the SNAPSHOT_SET_SWAP_AREA ioctl(). Signed-off-by:
-
Rafael J. Wysocki authored
To be able to use swap files as suspend storage from the userland suspend tools we need an additional ioctl() that will allow us to provide the kernel with both the swap header's offset and the identification of the resume partition. The new ioctl() should be regarded as a replacement for the SNAPSHOT_SET_SWAP_FILE ioctl() that from now on will be considered as obsolete, but has to stay for backwards compatibility of the interface. Signed-off-by:
-
Rafael J. Wysocki authored
Document the "resume_offset=" command line parameter as well as the way in which swap files are supported by swsusp. Signed-off-by:
-
